Effects of input energy and impactor shape on cranial fracture patterns.

This study documents relationships between input energy, impactor shape, and the formation of fractures in human crania. Parietal impact experiments (n = 12) were performed at 67% higher input energy compared to previously reported experiments. Fracture origins, characteristics, and locations were compared at two input energy levels with three impactor shapes (focal "hammer", flat "brick", and curved "bat"). Impacts with all three impactors at both energy levels produced fractures originating at and remote to the impact site, indicating both mechanisms are typical in temporoparietal blunt force impacts. Higher energy impacts generally produced more impact site fractures, depression, and comminution than lower energy impacts. A small, focal impactor produced cone cracks, depression, and fractures localized near the impact site. A broad, curved impactor produced circumferential fractures and linear fractures extending into adjacent bones. A broad, flat impactor produced fracture patterns ranging from linear fractures to large depressed and comminuted defects.

Investigating reverse butterfly fractures: An experimental approach and application of fractography.

Butterfly fractures are expected to form with the transverse portion on the tension side and the wedge portion on the compression side of a bent bone, however wedges have also been observed in the reverse orientation and are reported to be frequent in concentrated 4-point bending. To investigate how these fractures form, concentrated 4-point bending experiments were performed on nine human femora and documented using high-speed video. Videos showed the wedge portion formed as fracture initiated in tension, branched obliquely, then curved to terminate on the tension face. The transverse portion formed as a crack traveled between the curved fracture branch and the compression face. Fractography was also applied to evaluate fracture surfaces. At least one fractography feature was present in all femora and 32/35 bone fragments examined. Fracture propagation sequences interpreted using fractography matched those observed on video, demonstrating the utility of this method for evaluating complex fracture patterns.

Effects of age and rate of twist on torsional fracture patterns in infant porcine femora.

OBJECTIVE: Long bone fractures are a common injury in the pediatric population. Differentiation between abusive, or non-accidental trauma, and accidental trauma in children remains challenging for forensic practitioners. A recent clinical-based study was able to separate pediatric abusive from accidental trauma based on femoral fracture pattern using the ratio of fracture length over bone diameter (fracture ratio), as determined from radiographic analysis of this fractured bone. The forensic literature indicates more cases of abuse in younger pediatric victims than accidental cases. While this was the case in the clinical study, the effect was not shown to be statistically significant. Furthermore, while speed of trauma was not considered in the clinical study, a laboratory study with an immature bovine model indicates rotational speed influences fracture pattern, but specimen age was not varied in that study. Therefore, the objective of the current study was to use immature porcine femora to investigate the effects of age and rate of twist on a modified version of this fracture ratio parameter. METHODS: Fifteen pairs of porcine femora with various ages were twisted until observable failure using a custom-built torsional fixture. The left femur of each pair was twisted to failure at a rate of 3 deg/s, while the right femur was twisted at a rate of 90 deg/s. The torque and angle of rotation were recorded at a sampling rate of 10,000 Hz. Fracture ratio was defined as total fracture length divided by bone diameter. RESULTS: Fracture ratio increased with specimen age, with specimens under the low rate of twist yielding a consistently lower fracture ratio than those from specimens under the high rate of twist. The results showed that both specimen age and rate of twist were significant factors influencing fracture ratio. CONCLUSION: The determination of abusive from accidental trauma in criminal cases, based on the pattern of long bone fracture alone, may need to include additional data on the specific age of the pediatric victim and the potential speed of the traumatic event.

Experimental investigation of cranial fracture initiation in blunt human head impacts.

The relationship between the point of blunt impact and the location of cranial fracture initiation continues to be poorly understood. The current study used high-speed video to capture cranial fracture initiation and propagation in impact experiments on twelve unembalmed, intact human cadaver heads. Video footage provided direct evidence that blunt cranial impacts can produce linear fractures initiating peripheral to the impact site. Four tests produced only remote peripheral linear fractures with no damage at the known point of impact, demonstrating that the pattern of linear fractures does not necessarily indicate impact site. The range of variation observed in these experiments suggests that cranial fracture formation is more complex than it is typically described in the current literature. Differences in biomechanical and fracture results obtained with three different shaped implements provided evidence that impact surface is one important factor influencing the outcomes of blunt cranial impacts.

The Role of Interface Shape on the Impact Characteristics and Cranial Fracture Patterns Using the Immature Porcine Head Model,.

The forensic literature suggests that when adolescents fall onto edged and pointed surfaces, depressed fractures can occur at low energy levels. This study documents impact biomechanics and fracture characteristics of infant porcine skulls dropped onto flat, curved, edged, and focal surfaces. Results showed that the energy needed for fracture initiation was nearly four times higher against a flat surface than against the other surfaces. While characteristic measures of fracture such as number and length of fractures did not vary with impact surface shape, the fracture patterns did depend on impact surface shape. While experimental impacts against the flat surface produced linear fractures initiating at sutural boundaries peripheral to the point of impact (POI), more focal impacts produced depressed fractures initiating at the POI. The study supported case-based forensic literature suggesting cranial fracture patterns depend on impact surface shape and that fracture initiation energy is lower for more focal impacts.

A method of determining bending properties of poultry long bones using beam analysis and micro-CT data.

While conventional mechanical testing has been regarded as a gold standard for the evaluation of bone heath in numerous studies, with recent advances in medical imaging, virtual methods of biomechanics are rapidly evolving in the human literature. The objective of the current study was to evaluate the feasibility of determining the elastic and failure properties of poultry long bones using established methods of analysis from the human literature. In order to incorporate a large range of bone sizes and densities, a small number of specimens were utilized from an ongoing study of Regmi et al. (2016) that involved humeri and tibiae from 3 groups of animals (10 from each) including aviary, enriched, and conventional housing systems. Half the animals from each group were used for 'training' that involved the development of a regression equation relating bone density and geometry to bending properties from conventional mechanical tests. The remaining specimens from each group were used for 'testing' in which the mechanical properties from conventional tests were compared to those predicted by the regression equations. Based on the regression equations, the coefficients of determination for the 'test' set of data were 0.798 for bending bone stiffness and 0.901 for the yield (or failure) moment of the bones. All regression slopes and intercepts values for the tests versus predicted plots were not significantly different from 1 and 0, respectively. The study showed the feasibility of developing future methods of virtual biomechanics for the evaluation of poultry long bones. With further development, virtual biomechanics may have utility in future in vivo studies to assess laying hen bone health over time without the need to sacrifice large groups of animals at each time point.