Changes in Scapular Function, Shoulder Strength, and Range of Motion Occur After Latarjet Procedure.

Purpose: To evaluate the current literature on the effects of anatomic changes caused by the Latarjet procedure and to identify areas for future research. Methods: English-language studies that addressed the consequences of anatomic alterations after the open Latarjet procedure were included. Articles written in languages other than English, reviews, and case reports were excluded. Titles and abstracts were screened by 2 authors. Studies that met the inclusion criteria were screened by the same authors. The following data were extracted from the included studies: authors, year of publication, journal, country of origin, aims or purpose, study population and sample size, methods, procedure, intervention type, and key findings that relate to the scoping review questions. Results: Twenty-two studies were included for analysis, yielding the following findings: First, the Latarjet procedure may change the position of the scapula owing to pectoralis minor tenotomy and/or transfer of the conjoint tendon. Second, dissection of the coracoacromial ligament may result in increased superior translation of the humeral head. The impact of this increased translation on patients' function remains unclear. Third, the subscapularis split shows, overall, better internal rotation strength compared with subscapularis tenotomy. Fourth, passive external rotation may be limited after capsular repair. Fifth, despite the movement of the conjoint tendon, elbow function seems unchanged. Finally, the musculocutaneous nerve is lengthened with a changed penetration angle into the coracobrachialis muscle, but the clinical impact seems limited. Conclusions: The Latarjet procedure leads to anatomic and biomechanical changes in the shoulder. Areas of future research may include better documentation of scapular movement (bilateral, as well as preoperative and postoperative) and elbow function, the effect of (degenerative) rotator cuff ruptures after the Latarjet procedure on shoulder function, and the impact of capsular closure and its contribution to the development of glenohumeral osteoarthritis. Clinical Relevance: This comprehensive overview of anatomic changes after the Latarjet procedure, with its effects on shoulder and elbow function, showed gaps in the current literature. Orthopaedic shoulder surgeons and physical therapists could use our findings when providing patient information and performing future clinical research.

Surgical Intervention Following a First Traumatic Anterior Shoulder Dislocation Is Worthy of Consideration.

Up to 60% of patients experience recurrence after a first traumatic anterior shoulder dislocation (FTASD), which is often defined as having experienced either dislocation or subluxation. Thus surgical intervention after FTASD is worthy of consideration and is guided by the number of patients who need to receive surgical intervention to prevent 1 redislocation (i.e., number needed to treat), (subjective) health benefit, complication risk, and costs. Operative intervention through arthroscopic stabilization can be successful in reducing recurrence risk in FTASD, as has been shown in multiple randomized controlled trials. Nevertheless, there is a large "gray area" for the indication of arthroscopic stabilization, and it is therefore heavily debated which patients should receive operative treatment. Previous trials showed widely varying redislocation rates in both the intervention and control group, meta-analysis shows 2% to 19% after operative and 20% to 75% after nonoperative treatment, and redislocation rates may not correlate with patient-reported outcomes. The literature is quite heterogeneous, and a major confounder is time to follow-up. Furthermore, there is insufficient standardization of reporting of outcomes and no consensus on definition of risk factors. As a result, surgery is a reasonable intervention for FTASD patients, but in which patients it best prevents redislocation requires additional refinement.

The effect of scaling physiological cross-sectional area on musculoskeletal model predictions.

Personalisation of model parameters is likely to improve biomechanical model predictions and could allow models to be used for subject- or patient-specific applications. This study evaluates the effect of personalising physiological cross-sectional areas (PCSA) in a large-scale musculoskeletal model of the upper extremity. Muscle volumes obtained from MRI were used to scale PCSAs of five subjects, for whom the maximum forces they could exert in six different directions on a handle held by the hand were also recorded. The effect of PCSA scaling was evaluated by calculating the lowest maximum muscle stress (σmax, a constant for human skeletal muscle) required by the model to reproduce these forces. When the original cadaver-based PCSA-values were used, strongly different between-subject σmax-values were found (σmax=106.1±39.9 N cm(-2)). A relatively simple, uniform scaling routine reduced this variation substantially (σmax=69.4±9.4 N cm(-2)) and led to similar results to when a more detailed, muscle-specific scaling routine was used (σmax=71.2±10.8 N cm(-2)). Using subject-specific PCSA values to simulate an shoulder abduction task changed muscle force predictions for the subscapularis and the pectoralis major on average by 33% and 21%, respectively, but was <10% for all other muscles. The glenohumeral (GH) joint contact force changed less than 1.5% as a result of scaling. We conclude that individualisation of the model's strength can most easily be done by scaling PCSA with a single factor that can be derived from muscle volume data or, alternatively, from maximum force measurements. However, since PCSA scaling only marginally changed muscle and joint contact force predictions for submaximal tasks, the need for PCSA scaling remains debatable.

Comparison of measurements of medial gastrocnemius architectural parameters from ultrasound and diffusion tensor images.

In vivo measurements of muscle architecture provide insight into inter-individual differences in muscle function and could be used to personalise musculoskeletal models. When muscle architecture is measured from ultrasound images, as is frequently done, it is assumed that fascicles are oriented in the image plane and, for some measurements, that the image plane is perpendicular to the aponeurosis at the intersection of fascicle and aponeurosis. This study presents an in vivo validation of these assumptions by comparing ultrasound image plane orientation to three-dimensional reconstructions of muscle fascicles and aponeuroses obtained with diffusion tensor imaging (DTI) and high-resolution anatomical MRI scans. It was found that muscle fascicles were oriented on average at 5.5±4.1° to the ultrasound image plane. On average, ultrasound yielded similar measurements of fascicle lengths to DTI (difference <3mm), suggesting that the measurements were unbiased. The absolute difference in length between any pair of measurements made with ultrasound and DTI was substantial (10mm or 20% of the mean), indicating that the measurements were imprecise. Pennation angles measured with ultrasound were significantly smaller than those measured with DTI (mean difference 6°). This difference was apparent only at the superficial insertion of the muscle fascicles so it was probably due to pressure on the skin applied by the ultrasound probes. It is concluded that ultrasound measurements of deep pennation angles and fascicle lengths in the medial gastrocnemius are unbiased but have a low precision and that superficial pennation angles are underestimated by approximately 10°. The low precision limits the use of ultrasound to personalise fascicle length in musculoskeletal models.

Comparison of two methods for in vivo estimation of the glenohumeral joint rotation center (GH-JRC) of the patients with shoulder hemiarthroplasty.

Determination of an accurate glenohumeral-joint rotation center (GH-JRC) from marker data is essential for kinematic and dynamic analysis of shoulder motions. Previous studies have focused on the evaluation of the different functional methods for the estimation of the GH-JRC for healthy subjects. The goal of this paper is to compare two widely used functional methods, namely the instantaneous helical axis (IHA) and symmetrical center of rotation (SCoRE) methods, for estimating the GH-JRC in vivo for patients with implanted shoulder hemiarthroplasty. The motion data of five patients were recorded while performing three different dynamic motions (circumduction, abduction, and forward flexion). The GH-JRC was determined using the CT-images of the subjects (geometric GH-JRC) and was also estimated using the two IHA and SCoRE methods. The rotation centers determined using the IHA and SCoRE methods were on average 1.47±0.62 cm and 2.07±0.55 cm away from geometric GH-JRC, respectively. The two methods differed significantly (two-tailed p-value from paired t-Test ∼0.02, post-hoc power ∼0.30). The SCoRE method showed a significant lower (two-tailed p-value from paired t-Test ∼0.03, post-hoc power ∼0.68) repeatability error calculated between the different trials of each motion and each subject and averaged across all measured subjects (0.62±0.10 cm for IHA vs. 0.43±0.12 cm for SCoRE). It is concluded that the SCoRE appeared to be a more repeatable method whereas the IHA method resulted in a more accurate estimation of the GH-JRC for patients with endoprostheses.

Metabolic cost and mechanical work for the step-to-step transition in walking after successful total ankle arthroplasty.

The aim of this study was to investigate whether impaired ankle function after total ankle arthroplasty (TAA) affects the mechanical work during the step-to-step transition and the metabolic cost of walking. Respiratory and force plate data were recorded in 11 patients and 11 healthy controls while they walked barefoot at a fixed walking speed (FWS, 1.25 m/s) and at their self-selected speed (SWS). At FWS metabolic cost of transport was 28% higher for the TAA group, but at SWS there was no significant increase. During the step-to-step transition, positive mechanical work generated by the trailing TAA leg was lower and negative mechanical work in the leading intact leg was larger. Despite the increase in mechanical work dissipation during double support, no significant differences in total mechanical work were found over a complete stride. This might be a result of methodological limitations of calculating mechanical work. Nevertheless, mechanical work dissipated during the step-to-step transition at FWS correlated significantly with metabolic cost of transport: r=.540. It was concluded that patients after successful TAA still experienced an impaired lower leg function, which contributed to an increase in mechanical energy dissipation during the step-to-step transition, and to an increase in the metabolic demand of walking.

Shoulder biomechanics: today's consensus and tomorrow's perspectives.

Shoulder biomechanics is a fast growing field, which is progressively expanding its focus to include more applied research. The papers included in this Special Issue confirm this trend. After a classification of the papers as dealing with fundamental or applied research through theoretical or experimental methods, in this Editorial we tried to summarize the elements of consensus and the open issues discussed during the last International Shoulder Group meeting, held in Bologna (Italy) in 2008.

Gait analysis after successful mobile bearing total ankle replacement.

BACKGROUND: The effect of total ankle replacement on gait is not fully known in terms of joint kinematics, ground reaction force, and activity of the muscles of the lower leg. METHODS: A comparative gait study was done in 10 patients after uneventful unilateral mobile-bearing total ankle replacement and 10 healthy controls. A rigid body model was used to describe the motion of the knee and the three-dimensional motion of the ankle-hindfoot complex during barefoot walking. An opto-electronic motion analysis system was used to analyze bilateral movement patterns, synchronized with recordings of the ipsilateral vertical ground reaction forces and the electromyographic activity of four lower leg muscles. RESULTS: Velocity was 6% lower in the patient group. Dorsiflexion in the operated ankles was reduced (p < 0.001). No differences were found in the joint angular pattern of the knee joint and only minimal changes were found at the hindfoot-to-tibia and forefoot-to-hindfoot levels. The ground reaction force at midstance was somewhat increased (p = 0.005), while the magnitude of the vertical peak at terminal stance was decreased (p < 0.001). EMG activity patterns in the patient group were normal except for a higher activity of the gastrocnemius in early stance and the anterior tibial muscle in late stance. CONCLUSIONS: There is a near normal gait pattern in terms of joint kinematics of the knee, ankle, and foot after uneventful mobile-bearing total ankle replacement. The ground reaction forces and the EMG activity, however, do not fully normalize.

ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion--Part II: shoulder, elbow, wrist and hand.

In this communication, the Standardization and Terminology Committee (STC) of the International Society of Biomechanics proposes a definition of a joint coordinate system (JCS) for the shoulder, elbow, wrist, and hand. For each joint, a standard for the local axis system in each articulating segment or bone is generated. These axes then standardize the JCS. The STC is publishing these recommendations so as to encourage their use, to stimulate feedback and discussion, and to facilitate further revisions. Adopting these standards will lead to better communication among researchers and clinicians.