Electrospun PCL nanofibers blended with Wattakaka volubilis active phytochemicals for bone and cartilage tissue engineering.

In the present study, the polycaprolactone (PCL) nanofibers were investigated as a carrier to deliver phytochemicals for bone and cartilage tissue engineering. The PCL nanofibers was blended with phytochemicals hexadecanoic acid, octadecanoic acid and N,N-diisopropyl (2,2,3,3,3-pentafluoropropyl) amine isolated from a medicinal plant, Wattakaka volubilis. The scaffolds were characterized using scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The average diameter of control and phytochemical loaded nanofiber was 208 ±â€¯9.6 nm and 316 ±â€¯7.0 nm respectively. Biodegradation rate of nanofibers, impact of nanofiber on meniscus and osteoblast cell growth was analyzed using 3-(4,5-dimethyl thiazolyl-2)-2,5-diphenyl tetrazolium bromide (MTT) assay, DNA content and extra cellular matrix secretion. Hoechst stain and SEM images were used to visualize and monitor the cell growth on PCL scaffold. The phytochemicals incorporated PCL nanofibers enhanced the growth and proliferation of primary human meniscus and osteoblast like cells and hence may be suitable scaffold for bone and cartilage tissue engineering applications.

In vitro evaluation of phytochemical loaded electrospun gelatin nanofibers for application in bone and cartilage tissue engineering.

Wattakaka volubilis, a medicinal plant, is known to exhibit various potential health benefits and has traditionally been used in Ayurveda for various medicinal applications. In the present study, phytochemicals hexadecanoic acid, octadecanoic acid and N,N-Diisopropyl(2,2,3,3,3-pentafluoropropyl)amine isolated from W. volubilis leaf extract were co-electrospun with gelatin nanofibers for meniscus and osteoblast cell attachment and proliferation. The electrospun nanofibers were characterized using suitable techniques such as a scanning electron microscope and Fourier transform infrared spectroscopy. The mechanical property of electrospun gelatin nanofibers and phytochemicals incorporated gelatin nanofibers were tensile tested. Both the control and phytochemical loaded nanofiber exhibited a similar stress-strain trend. The average diameter of the control and phytocompound loaded gelatin nanofiber was found to be 300 ± 5.5 nm and 483 ± 12 nm, respectively. The rate of biodegradation of the control and phytochemical loaded nanofiber was analyzed in a simulated body fluid. The cell attachment and proliferation were monitored using a fluorescence microscope after appropriate staining. The cell viability, DNA content, extracellular secretion confirmed that the phytocompound loaded gelatin nanofibers were non-toxic and enhanced the meniscus and osteoblast cell growth and proliferation. This phytocompound loaded gelatin matrix may be used as a potential scaffold for cartilage and bone tissue engineering applications.

Phase Competition Induced Bio-Electrochemical Resistance and Bio-Compatibility Effect in Nanocrystalline Zrx-Cu100-x Thin Films.

Nano-crystalline Zrx-Cu100-x (x = 20-100 at.%) thin films with thickness ranging from 50 to 185 nm were deposited by magnetron co-sputtering with individual Zr and Cu targets. The as-sputtered thin films were characterized by Field Emission Scanning Electron Microscope (FE-SEM), Atomic Force Microscopy (AFM) and Glancing Incidence X-ray Diffraction (GIXRD) for structural and morphological properties. The crystallite size was found to decrease from 57 nm to 37 nm upon increasing the Zr content from 20 to 30 at.% with slight increase in the lattice strain from 0.17 to 0.33%. Further, increase in Zr content to 40 at.% leads to increase in the crystallite size to 57 nm due to stabilization of C10Zr7 phase along with the presence of nanocrystalline Cu-Zr phase. A bimodal distribution of grain size was observed from FE-SEM micrograph was attributed to the highest surface roughness in Zr30Cu70 thin films comprised of Cu10Zr7, Cu9Zr2, Cu-Zr intermetallic phases. In-vitro electrochemical behaviors of nano-crystalline Zrx-Cu100-x thin films in simulated body fluid (SBF) were investigated using potentiodynamic polarization studies. Electrochemical impedance spectroscopy (EIS) data fitting by equivalent electrical circuit fit model suggests that inner bulk layer contributes to high bio-corrosion resistance in Zrx-Cu100-x thin films with increase in Zr content. The results of cyto-compatibility assay suggested that Zr-Cu thin film did not introduce cytotoxicity to osteoblast cells, indicating its suitability as a bio-coating for minimally invasive medical devices.

Stimulation of human osteoblast cells (MG63) proliferation using decanoic acid and isopropyl amine fractions of Wattakaka volubilis leaves.

OBJECTIVES: This study was carried out to investigate the impact of various isolated phytochemical components present in the Wattakaka volubilis leaves for the growth and proliferation of human osteoblast like cells (MG63). KEY FINDINGS: Ethyl acetate was found to be the best solvent for potential extraction of phytocompounds. Further, the MTT assay was carried out to deduce the viability of 44 isolated phytochemicals. Ten phytochemical fractions found to increase the cell growth were subjected to statistical tool namely Plackett-Burman and Central composite design to screen the optimum phytochemical fraction and its dosage. The active phytochemical constituents were analysed and identified as hexadeconoic acid, octadeconoic acid, N,N-diisopropyl(2,2,3,3,3-pentafluoropropyl)amine using GC-MS and HPLC techniques. The impact of optimized concentration was assessed on osteoblast cells. The maximum % cell viability, % DNA and collagen content were found to be 164.44, 159.32 and 3.81, respectively. CONCLUSIONS: The results confirmed that the optimized fraction containing decanoic acid and isopropyl amine at particular concentration stimulated the proliferation of human osteoblast (MG63) cells. Hence, the optimized concentration of this compound from W. volubilis may used for treatment of bone related injuries externally.

Impact of silk fibroin-based scaffold structures on human osteoblast MG63 cell attachment and proliferation.

The present study was carried out to investigate the impact of various types of silk fibroin (SF) scaffolds on human osteoblast-like cell (MG63) attachment and proliferation. SF was isolated from Bombyx mori silk worm cocoons after degumming. Protein concentration in the degummed SF solution was estimated using Bradford method. Aqueous SF solution was used to fabricate three different types of scaffolds, viz, electrospun nanofiber mat, sponge, and porous film. The structures of the prepared scaffolds were characterized using optical microscopy and field emission scanning electron microscopy. The changes in the secondary structure of the proteins and the thermal behavior of the scaffolds were determined by Fourier transform infrared spectroscopy and thermo-gravimetric analysis, respectively. The biodegradation rate of scaffolds was determined by incubating the scaffolds in simulated body fluid for 4 weeks. MG63 cells were seeded on the scaffolds and their attachment and proliferation onto the scaffolds were studied. The MTT assay was carried out to deduce the toxicity of the developed scaffolds. All the scaffolds were found to be biocompatible. The amount of collagen produced by the osteoblast-like cells growing on different scaffolds was estimated.