Red-Emitting Carbon Quantum Dots for Biomedical Applications: Synthesis and Purification Issues of the Hydrothermal Approach.

The possibility of performing the synthesis of red-emitting carbon quantum dots (r-CDs), in a well-controllable, large scale and environmentally sustainable way is undoubtedly of fundamental importance, as it will pave the way to their employment in advanced medical large-scale applications. Knowledge of the difficulties involved in producing r-CDs with reproducible optical, structural, and chemical characteristics, might help in their large-scale production, making the process standardizable. In this work, we present an experimental study, also supported by results reported in the literature, on the issues encountered during the synthesis and post-synthesis purification treatments of r-CDS. We focused on the hydrothermal approach as it was found to be more suitable for future large-scale industrial applications. We propose three synthetic strategies and observed that employing p-phenylenediamine (p-PDA), as a precursor, the synthetic process showed low efficiency with low yields of r-CDs, large amounts of unreacted precursor, and reaction intermediates. Changing reaction parameters does not improve performance. The r-CDs obtained using citric acid (CA) and urea, as precursors, resulted to be sensitive to pH and difficult to separate from the reaction mixture. Furthermore, the proposed synthetic strategies show that the hydrothermal preparation of r-CDS requires approaches that are not fully sustainable.

Nitrogen-Doped Carbon Quantum Dots for Biosensing Applications: The Effect of the Thermal Treatments on Electrochemical and Optical Properties.

The knowledge of the ways in which post-synthesis treatments may influence the properties of carbon quantum dots (CDs) is of paramount importance for their employment in biosensors. It enables the definition of the mechanism of sensing, which is essential for the application of the suited design strategy of the device. In the present work, we studied the ways in which post-synthesis thermal treatments influence the optical and electrochemical properties of Nitrogen-doped CDs (N-CDs). Blue-emitting, N-CDs for application in biosensors were synthesized through the hydrothermal route, starting from citric acid and urea as bio-synthesizable and low-cost precursors. The CDs samples were thermally post-treated and then characterized through a combination of spectroscopic, structural, and electrochemical techniques. We observed that the post-synthesis thermal treatments show an oxidative effect on CDs graphitic N-atoms. They cause their partially oxidation with the formation of mixed valence state systems, [CDs]0+, which could be further oxidized into the graphitic N-oxide forms. We also observed that thermal treatments cause the decomposition of the CDs external ammonium ions into ammonia and protons, which protonate their pyridinic N-atoms. Photoluminescence (PL) emission is quenched.

Sulfonate-Conjugated Polyelectrolytes as Anode Interfacial Layers in Inverted Organic Solar Cells.

Conjugated polymers with ionic pendant groups (CPEs) are receiving increasing attention as solution-processed interfacial materials for organic solar cells (OSCs). Various anionic CPEs have been successfully used, on top of ITO (Indium Tin Oxide) electrodes, as solution-processed anode interlayers (AILs) for conventional devices with direct geometry. However, the development of CPE AILs for OSC devices with inverted geometry is an important topic that still needs to be addressed. Here, we have designed three anionic CPEs bearing alkyl-potassium-sulfonate side chains. Their functional behavior as anode interlayers has been investigated in P3HT:PC61BM (poly(3-hexylthiophene): [6,6]-phenyl C61 butyric acid methyl ester) devices with an inverted geometry, using a hole collecting silver electrode evaporated on top. Our results reveal that to obtain effective anode modification, the CPEs' conjugated backbone has to be tailored to grant self-doping and to have a good energy-level match with the photoactive layer. Furthermore, the sulfonate moieties not only ensure the solubility in polar orthogonal solvents, induce self-doping via a right choice of the conjugated backbone, but also play a role in the gaining of hole selectivity of the top silver electrode.

Substituent and counterion effects on the formation of π-dimer dications of end-capped heptathienoacenes.

We have investigated the impact of the functionalization and the chemical nature of counterions on the π-dimer dications formation in two end-capped heptathienoacenes. Radical cations of an α-substituted heptathienoacene with triisopropylsilyl groups do not π-dimerize, while those of an α,ß-substituted heptathienoacene with four n-decyl side chains show a high propensity toward π-dimerization, increased by PF(6)(-) counterions.

Neutral and oxidized triisopropylsilyl end-capped oligothienoacenes: a combined electrochemical, spectroscopic, and theoretical study.

This work presents an analysis of the structural, electrochemical, and optical properties of a family of triisopropylsilyl end-capped oligothienoacenes (TIPS-Tn-TIPS, n=4-8) by combining cyclic voltammetry, spectroscopic techniques, and quantum-chemical calculations. TIPS-Tn-TIPS compounds form stable radical cations, and dications are only obtained for the longest oligomers (n=7 and 8). Oxidation leads to the quinoidization of the conjugated backbone, from which electrons are mainly extracted. The absorption and fluorescence spectra show partially resolved vibronic structures even at room temperature, due to the rigid molecular geometry. Two well-resolved vibronic progressions are observed at low temperatures due to the vibronic coupling, with normal modes showing wavenumbers of approximately 1525 and approximately 480 cm(-1). Optical absorption bands display remarkable bathochromic dispersion with the oligomer length, indicative of the extent of pi conjugation. The optical properties of the oxidized compounds are characterized by in situ UV/Vis/NIR spectroelectrochemistry. The radical cation species show two intense absorption bands emerging at energies lower than in the neutral compounds. The formation of the dication is only detected for the heptamer and the octamer, and shows a new band at intermediate energies. Optical data are interpreted with the help of density functional theory calculations performed at the B3LYP/6-31G** level, both for the neutral and the oxidized compounds.

Oxidation of end-capped pentathienoacenes and characterization of their radical cations.

A detailed investigation of the optical and electrochemical properties of two pentathienoacene derivatives, 2,6-bis(trimethylsilyl)-alpha-pentathienoacene (TMS-T5-TMS) and 2,6-bis(triisopropylsilyl)-alpha-pentathienoacene (TIPS-T5-TIPS), as the neutral and oxidized species was performed in the temperature range of 80-300 K. The experimental solution UV/Vis and solid-state Raman spectra were interpreted by using time-dependent DFT and DFT quantum chemical calculations at the B3LYP/6-31G** level. Bond lengths, HOMO-LUMO positions, and charge distribution were also predicted by computational methods for both the neutral and oxidized states of each thienoacene. As evidenced by ESR and spectroelectrochemical data, upon oxidation the pentathienoacene derivative with the less sterically hindering trimethylsilyl solubilizing groups, TMS-T5-TMS, undergoes pi dimerization to form [TMS-T5-TMS](2) (2+). In contrast, TIPS-T5-TIPS, with the more bulky triisopropylsilyl solubilizing groups, was oxidized to the radical cation but dimerization was prevented due to steric interactions. These experimental observations are supported by DFT calculations, which were used to investigate [TMS-T5-TMS](2) (2+) and [TIPS-T5-TIPS](2) (2+) pi dimers in the solid state and in solution. The redox potentials and absorption peak locations corresponding to the radical cations and pi dimer of TMS-T5-TMS were identified experimentally.

The role of triphenylamine in the stabilization of highly efficient polyfluorene-based OLEDs: a model oligomers study.

In order to understand the factors responsible for the improved efficiency and stability of organic light-emitting diodes (OLEDs) based on poly(9,9-dioctylfluorene) (PFO) when triphenylamine (TPA) is introduced as lateral fluorene substituent, we synthetize mono-disperse fluorene-thiophene oligomers as model compounds. Their blends with different concentrations of the fluorenone containing oligomer are studied in order to verify if only a reduction of ketonic defect sites or also an impeded energy transfer (ET) towards such sites are responsible for the suppression of the green emission band. We show that the introduction of TPA groups leads specifically both to an antioxidant action and a reduced ET towards residual defect sites, thanks to the environmental micro-encapsulation role played by TPA units surrounding the polymer backbone. As a result, the performances and colour stability of a device fabricated with TPA-substituted PFO (PFTPA) are strongly improved with respect to standard PFO device prepared in the same conditions.

Monolayers and multilayers of conjugated polymers as nanosized electronic components.

Conjugated polymers (CPs) are interesting materials for preparing devices based on nanoscopic molecular architectures because they exhibit electrical, electronic, magnetic, and optical properties similar to those of metals or semiconductors while maintaining the flexibility and ease of processing of polymers. The production of well-defined mono- and multilayers of CPs on electrodes with nanometer-scale, one-dimensional resolution remains, however, an important challenge. In this Account, we describe the preparation and conductive properties of nanometer-sized CP molecular structures formed on electrode surfaces--namely, self-assembled monolayer (SAM), brush-type, and self-assembled multilayer CPs--and in combination with gold nanoparticles (AuNPs). We have electrochemically polymerized SAMs of carboxyalkyl-functionalized terthiophenes aligned either perpendicular or parallel to the electrode surface. Anodic coupling of various pyrrole- and thiophene-based monomers in solution with the oligothiophene-based SAMs produced brush-like films. Microcontact printing of these SAMs produced patterns that, after heterocoupling, exhibited large height enhancements, as measured using atomic force microscopy (AFM). We have employed layer-by-layer self-assembly of water-soluble polythiophene-based polyelectrolytes to form self-assembled multilayers. The combination of isostructural polycationic and polyanionic polythiophenes produced layers of chains aligned parallel to the substrate plane. These stable, robust, and dense layers formed with high regularity on the preformed monolayers, with minimal interchain penetration. Infrared reflection/adsorption spectroscopy and X-ray diffraction analyses revealed unprecedented degrees of order. Deposition of soluble polypyrroles produced molecular layers that, when analyzed using a gold-coated AFM tip, formed gold-polymer-gold junctions that were either ohmic or rectifying, depending of the layer sequence. We also describe the electronic conduction of model alpha,omega-capped sexithiophenes featuring a range of electron donor/acceptor units and lengths of additional conjugation. The sexithiophene cores exhibit redox-type conductivity, developing at the neutral/cation and cation/dication levels with values depending the nature of the substitution and the redox system. Extending the conjugation beyond the sexithiophene frame introduces further oxidation processes displaying enhanced conductivity. Finally, we discuss the ability of CP-based monolayers to coordinate AuNPs. Although thiophene- and pyrrole-based oligomers aggregate toluene-soluble AuNPs, alkyl substitution inhibits the aggregation process through steric restraint. Consequently, we investigated the interactions between AuNPs and polypyrrole or polythiophene monolayers, including those formed from star-shaped molecules. The hindered aggregation provided by alkyl substituents allowed us to adsorb thiol-functionalized oligothiophenes and oligopyrroles directly onto preformed AuNPs. Novel materials incorporating AuNPs of the same size but bearing different conjugated ends or bridges have great promise for applications in electrocatalysis, electroanalysis, and organic electronics.

Reaction of gold nanoparticles with tetracyanoquinoidal molecules. Spectrophotometric determination of the Au0 content of gold nanoparticles.

The interaction of gold nanoparticles (AuNPs) and typical tetracyanoquinoidal compounds such as bis(dicyanomethylene)-bithiophene and tetracyanoquinodimethane (TCNQ) has been investigated. AuNPs in toluene solution reduce the tetracyano compounds to the radical anion, as shown by UV-vis spectroscopy. The reaction, promoted by the bromide anion used as a stabilizer for AuNPs, involves in the case of TCNQ the total amount of Au(0) in the nanoparticles. A spectrophotometric method for the evaluation of the Au(0) content of capped AuNPs in organic solution has been established and successfully applied to the analysis of dodecanethiol-capped AuNPs.

Push-pull bithienyl chromophore with an unusual transverse path of conjugation.

The synthesis, structure, and electronic properties of a novel cross-conjugated 10H-bisthienodithiocin-10-dicyanoethylene are reported. The X-ray single-crystal structure of the compound reveals a nonplanar conformation. The FT-IR and FT-Raman spectra of the compound show a great resemblance, which is a spectroscopic observation common to many push-pull systems. The UV-vis spectrum in CHCl3 displays a strong absorption at 370 nm accompanied by a shoulder at 430 nm so that the optical gap is 2.88 eV. On the other hand, the electrochemical gap amounts to 2.38 V. DFT and TDDFT quantum chemical calculations, at the B3LYP/6-31G** level, have been also performed to (i) determine the minimum-energy molecular structure, (ii) gain knowledge about the equilibrium atomic charges distribution, the topologies, and absolute energies of the frontier molecular orbitals around the gap and about the molecular vibrations which give rise to the most outstanding Raman bands experimentally evidenced, and (iii) to analyze the nature of the vertical one-electron excitations associated to the strongest UV-vis absorptions.