Hand-Portable Miniaturized Liquid Chromatography for the Determination of Chlorogenic Acids in Dietary Supplements.

With the explosive growth of the dietary supplements industry, new demands have emerged that cannot be faced with the sophisticated instrumentation available in well-equipped laboratories. In particular, there is a demand for simplified and easy-to-use instruments, capable of providing results in short times of analysis. In this study, a hand-portable miniaturized liquid chromatograph (portable LC) has been tested for the determination of chlorogenic acids (CGAs) in products intended to supplement the diet and elaborated with green coffee extracts. CGAs offer several health benefits due to their antioxidant properties, and an increasing number of dietary supplements are marketed with claimed high contents of these compounds. The results obtained with the proposed portable LC approach have been compared with those obtained with two other miniaturized benchtop liquid chromatography instruments, namely, a capillary liquid chromatograph (capLC) and a nano liquid chromatograph (nanoLC). Although compared with the methods that used the benchtop instruments, the sensitivity attainable was lower, the portable LC instrument provided a comparable analytical performance for the quantification of the main GCAs at low mg g-1 levels, and it was clearly superior in terms of speed. The proposed portable LC-based method can be applied to assess the content and distribution profile of the predominant CGAs in this kind of dietary supplement. It can be also used to estimate the antioxidant power due to CGAs, as well as their preservation state.

The association of salivary caffeine levels with serum concentrations in premature infants with apnea of prematurity.

The purpose of this paper is to verify whether the concentrations of caffeine in saliva are comparable to serum concentrations in preterm infants who are treated with caffeine for apnea of prematurity. This is a prospective observational study. Eligible participants were newborn infants < 37 weeks of gestational age treated with oral or intravenous caffeine for apnea of prematurity. Two paired samples of saliva and blood were collected per patient. Tube solid-phase microextraction coupled online to capillary liquid chromatography with diode array detection was used for analysis. A total of 47 infants with a median gestational age of 28 [26-30] weeks and a mean of 1.11 ± 0.4 kg of birth weight. Median postmenstrual age, when samples were collected, was 31 [29-33] weeks. Serum caffeine median levels of 19.30 µg/mL [1.9-53.90] and salivary caffeine median levels of 16.36 µg/mL [2.20-56.90] were obtained. There was a strong positive Pearson's correlation between the two variables r = 0.83 (p < 0.001). CONCLUSION: The measurement of salivary caffeine concentrations after intravenous or oral administration offers an alternative to serum caffeine monitoring in apnea of prematurity. Measurement of salivary concentration minimizes blood draws, improves blood conservation, and subsequently minimizes painful procedures in premature infants. WHAT IS KNOWN: • Salivary sampling may be useful when is applied to extremely low birth weight infant, in whom blood sampling must be severely restricted. WHAT IS NEW: • The measurement of caffeine salivary concentrations after intravenous or oral administration offers an alternative to serum caffeine monitoring in apnoea of prematurity. • Salivary sampling may be a valid non-invasive alternative that could be used to individualize and optimize caffeine dose.

Capillary Liquid Chromatography for the Determination of Terpenes in Botanical Dietary Supplements.

Dietary supplements of botanical origin are increasingly consumed due to their content of plant constituents with potential benefits on health and wellness. Among those constituents, terpenes are gaining attention because of their diverse biological activities (anti-inflammatory, antibacterial, geroprotective, and others). While most of the existing analytical methods have focused on establishing the terpenic fingerprint of some plants, typically by gas chromatography, methods capable of quantifying representative terpenes in herbal preparations and dietary supplements with combined high sensitivity and precision, simplicity, and high throughput are still necessary. In this study, we have explored the utility of capillary liquid chromatography (CapLC) with diode array detection (DAD) for the determination of different terpenes, namely limonene, linalool, farnesene, α-pinene, and myrcene. An innovative method is proposed that can be applied to quantify the targets at concentration levels as low as 0.006 mg per gram of sample with satisfactory precision, and a total analysis time <30 min per sample. The reliability of the proposed method has been tested by analyzing different dietary supplements of botanical origin, namely three green coffee extract-based products, two fat burnings containing Citrus aurantium (bitter orange), and an herbal preparation containing lime and leaves of orange trees.

Innovations in Extractive Phases for In-Tube Solid-Phase Microextraction Coupled to Miniaturized Liquid Chromatography: A Critical Review.

Over the past years, a great effort has been devoted to the development of new sorbents that can be used to pack or to coat extractive capillaries for in-tube solid-phase microextraction (IT-SPME). Many of those efforts have been focused on the preparation of capillaries for miniaturized liquid chromatography (LC) due to the reduced availability of capillary columns with appropriate dimensions for this kind of system. Moreover, many of the extractive capillaries that have been used for IT-SPME so far are segments of open columns from the gas chromatography (GC) field, but the phase nature and dimensions are very limited. In particular, polar compounds barely interact with stationary GC phases. Capillary GC columns may also be unsuitable when highly selective extractions are needed. In this work, we provide an overview of the extractive capillaries that have been specifically developed for capillary LC (capLC) and nano LC (nanoLC) to enhance the overall performance of the IT-SPME, the chromatographic separation, and the detection. Different monolithic polymers, such as silica C18 and C8 polymers, molecularly imprinted polymers (MIPs), polymers functionalized with antibodies, and polymers reinforced with different types of carbon nanotubes, metal, and metal oxide nanoparticles (including magnetic nanoparticles), and restricted access materials (RAMs) will be presented and critically discussed.

Quantifying both ammonium and proline in wines and beer by using a PDMS composite for sensoring.

Two of the reagents involved in the Berthelot's reaction, thymol and nitroprusside, were embedded in a PDMS composite in order to apply this assay to determine ammonium and proline, in wine and beers. Safety, portability, rapidity, cost-effectiveness and simplicity of the assay were improved. For the proline determination, a modified Berthelot's reaction, which included a ring cleavage of proline, was optimized. The accuracy of the assay was tested. The limits of detection for ammonium was 0.12 µg mL-1 and for proline was in the range from 0.7 to 4.1 µg mL-1, depending on the kind of wine (white, red, or sweet), for beer the LOD was 6 µg mL-1. The precision achieved was slower than 10%. The accuracy of the assay was tested by means of a confirmatory validation study. Good results were obtained for real samples.

Analysis of Contact Traces of Cannabis by In-Tube Solid-Phase Microextraction Coupled to Nanoliquid Chromatography.

Because of its inherent qualities, in-tube solid-phase microextraction (IT-SPME) coupled on-line to nanoliquid chromatography (nanoLC) can be a very powerful tool to address the new challenges of analytical laboratories such as the analysis of traces of complex samples. This is the case of the detection of contact traces of drugs, especially cannabis. The main difficulties encountered in the analysis of traces of cannabis plants on surfaces are the low amount of sample available (typically < 1 mg), the complexity of the matrix, and the low percentages of cannabinoic compounds in the samples. In this work, a procedure is described for the detection of residues of cannabis on different surfaces based on the responses obtained by IT-SPME coupled to nanoLC with UV diode array detection (DAD) for the cannabinoids Δ8-tetrahydrocannabinol (THC), cannabidiol (CBD), and cannabinol (CBN); the proposed conditions can also be applied for quantitative purposes through the measurement of the percentage of THC, the most abundant cannabinoid in plants. The method is based on collecting the suspected drug samples with cotton swabs, followed by the extraction of the target compounds by ultrasound assisted extraction. The extracts are then separated and processed by IT-SPME-nanoLC. The proposed approach has been applied to the detection of traces of cannabis in different kind of items (plastic bags, office paper, aluminum foil, cotton cloths, and hand skin). Sample amounts as low as 0.08 mg have been collected and analysed for THC. The selectivity and effect of the storage conditions on the levels of THC have also been evaluated. The percentages of THC in the samples typically ranged from 0.6% to 2.8%, which means that amounts of this compound as low as 1⁻2 µg were adequately detected and quantified. For the first time, the reliability of IT-SPME-nanoLC for the analysis of complex matrices such as cannabis plant extracts has been demonstrated.

Disinfection by-products effect on swimmers oxidative stress and respiratory damage.

Disinfection by-products (DBPs) are generated through the reaction of chlorine with organic and inorganic matter in indoor swimming pools. Different DBPs are present in indoor swimming pools. This study evaluated the effects of different chlorinated formations in oxidative stress and lung damage in 20 swimmers after 40 min of aerobic swimming in 3 indoor pools with different characteristics. Biological samples were collected to measure lung damage (serum-surfactant-associated proteins A and B), oxidative stress parameters (plasma protein carbonylation and malondialdehyde, and whole-blood glutathione oxidation), and swimming exertion values (blood lactate) before and after exercise. Free chlorine and combined chlorine in water, and chlorine in air samples were determined in all the swimming pools. Chlorination as disinfection treatment led to the formation of chloramines in water samples, mainly mono- and dichloramine. However, free chlorine was the predominate species in ultraviolet-treated swimming pool. Levels of total chlorine increased as a function of the swimming activity in chlorinated swimming pools. The lower quality of the installation resulted in a higher content of total chlorine, especially in air samples, and therefore a higher exposure of the swimmer to DBPs. However, the concentration level of chlorinated DBPs did not result in significant variation in serum-surfactant-associated proteins A and oxidative stress parameters in swimmers. In conclusion, the quality of the installation affected the DBPs concentration; however, it did not lead to lung epithelial damage and oxidative stress parameters in swimmers.

New Tools for Characterizing Metallic Nanoparticles: AgNPs, A Case Study.

Currently, transmission electron microscopy (TEM) is the main technique for estimating the sizes of spherical nanoparticles (NPs) and through them, their concentrations. This paper demonstrates for the first time that C18 reversed-phase capillary liquid chromatography (Cap-LC) coupled to diode array detection (DAD) has the potential to estimate mean concentrations of silver nanoparticles (AgNPs) and thereby determine their average size. Direct injection of the sample without previous extraction or separation steps is carried out. Only a unique standard with a known AgNP size is needed for the calibration. In a first approach, the new method has been tested over silver nanoparticles, produced using different methods of synthesis, and their water dilutions. Good results were achieved: relative errors ranged up to 5% compared with TEM. Also stability and functionality-related NP properties, as well as nonspherical AgNPs, can be studied using this method. Moreover, by coupling online in-tube solid-phase microextraction (IT-SPME) to Cap-LC-DAD, the effect of the dilution can be studied as particles distribute by polarity in two groups, a distribution that responds to average particle size of not only AgNPs, but also gold nanoparticles (AuNPs). In such a distribution, the average particle size is correlated with the peak area ratio. Additionally, besides higher sensitivity and concentration-dependent signals, IT-SPME-Cap-LC responds to changes in the particle's hydrodynamic diameter allowing, for instance, the detection of cationic surfactants. Size-exclusion and hydrophobic effects are the mechanisms involved to explain this behavior.

Microextraction with phases containing nanoparticles.

In this article, the state of the art of microextraction techniques that involve nanoparticles or nanomaterials (NPs) is reviewed, with special emphasis on the applications described in the biomedical field. The uses and advantages of the different types of NPs such as carbon nanotubes (either single- and multi-walled) and other carbon-based materials, metallic NPs, including gold, silver and magnetic NPs, and silica NPs are summarized. The main strategies used to modify the selectivity, extractive capacity and/or the stability of NPs through a chemical reaction are also reviewed. The potential advantages of NPs in different forms of off-line and on-line microextraction are discussed, and illustrative examples of application in the biomedical field are shown.

Analysis of polar triazines and degradation products in waters by in-tube solid-phase microextraction and capillary chromatography: an environmentally friendly method.

This paper describes a new method for the determination of polar triazines, including some degradation products, which combines online in-tube solid-phase microextraction (IT-SPME) and capillary liquid chromatography with UV-diode array detection (DAD). Different extractive coatings have been evaluated for IT-SPME, a capillary column with a polydimethylsiloxane (PDMS) coating, and the same coating modified with carboxylated single-wall carbon nanotubes (c-SWCNTs) and carboxylated multiwall carbon nanotubes (c-MWCNTs). On the basis of the results obtained, a new method is presented for the identification and determination of triazines in water samples. A careful selection of the eluent composition provides the required selectivity and sensitivity for the quantification of the target analytes, even those highly polar (log K ow ≤ 2.3). The proposed conditions have been successfully used for the quantitation of the analytes in the 0.25-50.0 µg L(-1) range. The limits of detection (LODs) are in the 0.02-0.1 µg L(-1) range, and the intraday and interday relative standard deviation (RSD) coefficients are ≤9 and ≤17 %, respectively. The reliability of the described method has been tested by analyzing several real water samples. The proposed method can be considered an environmentally friendly and cost-effective alternative for routine monitoring of triazines and their degradation products in waters.