Ultraviolet photography in vitiligo: image quality, validity and reliability.

BACKGROUND: For clinical care and research in vitiligo, photographs with the use of ultraviolet (UV) light or Wood's lamp are often made. Conventional cameras are insensitive to UV light. The use of a UV camera (UV photography) might improve image quality and ameliorate the assessment of target lesions in vitiligo. OBJECTIVES: To determine image quality and the validity and reliability of UV photography for the assessment of vitiligo target lesions. METHODS: Images of patients with vitiligo were made with UV photography and a conventional camera, and lesions were drawn on graph paper and transparent sheets. Image quality was scored by vitiligo experts and medical interns. The intraclass correlation coefficients (ICCs) of the lesion size determined with UV photography combined with digital surface measurement and the other techniques were hypothesized to be above 0.6. The ICCs between UV images taken by the same physician and between two different physicians were calculated for determining inter- and intra-reliability. RESULTS: In total, 31 lesions of 17 patients were included. Image quality was assessed as good or very good for 100% and 26% for UV photography and the conventional camera, respectively. ICCs of UV photography and the conventional camera, drawing the lesions on transparent sheets and graph paper, were 0.984, 0.988 and 0.983, respectively, confirming our hypotheses. The ICCs of the intra-rater and inter-rater were 0.999 and 0.998, respectively. CONCLUSIONS: The results of this study indicate that the use of UV photography for the assessment of vitiligo lesions improves image quality and is valid and reliable.

Do mathematical model studies settle the controversy on the origin of cardiac synchronous trans-thoracic electrical impedance variations? A systematic review.

Impedance cardiography (ICG) is a method to evaluate cardiac-stroke volume and cardiac-output by measuring the cardiac-synchronous changes in the dynamic trans-thoracic electrical impedance (ΔZ). Clinical evaluations on the accuracy of ICG showed varying results. Consequently, the classic assumption in ICG-the aorta as a main source of ΔZ-is questioned and subsequently investigated in simulation studies using mathematical models of the electrical resistivity of the human body. The aim is to review the consensus in mathematical modelling studies that investigate the origin of the ΔZ as measured in ICG. In a systematic literature search, studies were identified and surveyed with reference to characteristics, such as included organs and their resistivity and geometries, electrode positions and calculation of ΔZ, to review the consensus between mathematical modelling studies that investigate the origin of the ΔZ as measured in ICG. Thirteen papers showed considerable variation in the model's characteristics with varying or contradicting outcomes for the ΔZ 's origin. For instance, 11 studies excluded perfused muscle tissue, implying implicitly their insignificance, while 3 other studies included muscle tissue and indicated it as the most important origin of ΔZ. In conclusion, the reviewed papers show a lack of consensus with respect to both the modelled characteristics as well as the model outcomes and, as a result, these studies failed to settle the controversy on ΔZ 's origin. Recommendations have been added to improve future mathematical model studies.

How flatbed scanners upset accurate film dosimetry.

Film is an excellent dosimeter for verification of dose distributions due to its high spatial resolution. Irradiated film can be digitized with low-cost, transmission, flatbed scanners. However, a disadvantage is their lateral scan effect (LSE): a scanner readout change over its lateral scan axis. Although anisotropic light scattering was presented as the origin of the LSE, this paper presents an alternative cause. Hereto, LSE for two flatbed scanners (Epson 1680 Expression Pro and Epson 10000XL), and Gafchromic film (EBT, EBT2, EBT3) was investigated, focused on three effects: cross talk, optical path length and polarization. Cross talk was examined using triangular sheets of various optical densities. The optical path length effect was studied using absorptive and reflective neutral density filters with well-defined optical characteristics (OD range 0.2-2.0). Linear polarizer sheets were used to investigate light polarization on the CCD signal in absence and presence of (un)irradiated Gafchromic film. Film dose values ranged between 0.2 to 9 Gy, i.e. an optical density range between 0.25 to 1.1. Measurements were performed in the scanner's transmission mode, with red-green-blue channels. LSE was found to depend on scanner construction and film type. Its magnitude depends on dose: for 9 Gy increasing up to 14% at maximum lateral position. Cross talk was only significant in high contrast regions, up to 2% for very small fields. The optical path length effect introduced by film on the scanner causes 3% for pixels in the extreme lateral position. Light polarization due to film and the scanner's optical mirror system is the main contributor, different in magnitude for the red, green and blue channel. We concluded that any Gafchromic EBT type film scanned with a flatbed scanner will face these optical effects. Accurate dosimetry requires correction of LSE, therefore, determination of the LSE per color channel and dose delivered to the film.

Difficult arterial cannulation in children: is a near-infrared vascular imaging system the answer?

BACKGROUND: Arterial cannulation is a common anaesthetic procedure that can be challenging and time-consuming in small children. By visualizing the position of the radial artery, near-infrared vascular imaging systems (NIRVISs) might be of assistance in arterial cannulation. The present study evaluates the effectiveness of an NIRVIS in arterial cannulation in infants. METHODS: An observational study was conducted in patients up to 3 yr old, undergoing arterial cannulation before cardiothoracic surgery. Arterial cannulation was performed as usual in 38 patients, and subsequently with the NIRVIS in 39 patients. RESULTS: The time to successful cannulation was 547 s (171-1183) without and 464 s (174-996) with the NIRVIS (P=0.76) and the time to first flashback of blood was 171 s (96-522) and 219 s (59-447), respectively (P=0.38). There was a tendency in favour of the NIRVIS in success at first attempt: 12/38 and 7/39, respectively (P=0.29) and in the number of punctures: 6 (2-12) and 3 (1-7), respectively (P=0.10). CONCLUSIONS: The present study did not show a significant clinical improvement when NIR light was used during arterial cannulation in small children. There is a large difference between time to first flashback of blood and time to successful cannulation, indicating that inserting the cannula, and not localizing the artery, is the main difficulty in arterial cannulation in children.

Signal-to-noise contribution of principal component loads in reconstructed near-infrared Raman tissue spectra.

The overall quality of Raman spectra in the near-infrared region, where biological samples are often studied, has benefited from various improvements to optical instrumentation over the past decade. However, obtaining ample spectral quality for analysis is still challenging due to device requirements and short integration times required for (in vivo) clinical applications of Raman spectroscopy. Multivariate analytical methods, such as principal component analysis (PCA) and linear discriminant analysis (LDA), are routinely applied to Raman spectral datasets to develop classification models. Data compression is necessary prior to discriminant analysis to prevent or decrease the degree of over-fitting. The logical threshold for the selection of principal components (PCs) to be used in discriminant analysis is likely to be at a point before the PCs begin to introduce equivalent signal and noise and, hence, include no additional value. Assessment of the signal-to-noise ratio (SNR) at a certain peak or over a specific spectral region will depend on the sample measured. Therefore, the mean SNR over the whole spectral region (SNR(msr)) is determined in the original spectrum as well as for spectra reconstructed from an increasing number of principal components. This paper introduces a method of assessing the influence of signal and noise from individual PC loads and indicates a method of selection of PCs for LDA. To evaluate this method, two data sets with different SNRs were used. The sets were obtained with the same Raman system and the same measurement parameters on bladder tissue collected during white light cystoscopy (set A) and fluorescence-guided cystoscopy (set B). This method shows that the mean SNR over the spectral range in the original Raman spectra of these two data sets is related to the signal and noise contribution of principal component loads. The difference in mean SNR over the spectral range can also be appreciated since fewer principal components can reliably be used in the low SNR data set (set B) compared to the high SNR data set (set A). Despite the fact that no definitive threshold could be found, this method may help to determine the cutoff for the number of principal components used in discriminant analysis. Future analysis of a selection of spectral databases using this technique will allow optimum thresholds to be selected for different applications and spectral data quality levels.

[Laser treatment in root canals. Effective by explosive vapour bubbles]. / Laserbehandeling in wortelkanalen. Effectief door explosieve dampbellen.

Since the late eighties pulsed infrared lasers like the Er:YAG and the Er,Cr:YSGG lasers are available for dentists. These lasers appear to have interesting applications in endodontics. It was demonstrated in vitro, with dyes, that a root canal can effectively be irrigated with them. Initially these lasers were recommended for preparation of enamel, dentin and bone and for surgery. The way that it worked in a root canal in combination with a liquid was, however, not clear. With a special high speed imaging technique the working mechanism of a pulsed infrared laser was studied, using a model of a root canal in a basin filled with either water or with a 5% NaOCl solution. The working mechanism can be attributed to the high stream of liquid, the turbulence and the cavity-effects, created by explosive vapour bubbles. These phenomena appear to make a major contribution to the cleansing and disinfecting of the root canal.

Endovenous laser ablation: an experimental study on the mechanism of action.

OBJECTIVES: The aim of this experimental study was to investigate the mechanism of action of endovenous laser ablation (EVLA) using an 810-nm diode laser. METHODS: We compared intermittent and continuous delivery of laser energy and studied the absorption of laser light by blood, intravascular temperatures in ex vivo human vein segments using an intravascular thermography catheter and heat dissipation in a model tissue using the Schlieren technique. RESULTS: Laser light is absorbed by blood and converted to heat leading to coagulation, vaporization and carbonization, and forming an isolating layer at the fibre tip. Laser energy is then absorbed into the isolating layer forming black patches that burned on the laser fibre. Intravascular temperature increased rapidly above carbonization temperatures (300 degrees C) after the fibre tip reached the thermocouple, stayed at this temperature for a few seconds and decreased gradually to around 30 degrees C, 10 s after the fibre tip passed the thermocouple. Schlieren techniques revealed that heat spread from the laser was locally distributed and closely around the laser fibre tip while heat dissipation is minimal and comparable for both exposures. Compared with intermittent exposure, continuous exposure results in more carbonization, higher mean maximum intravascular temperature (128 +/- 7 vs. 75 +/- 4 degrees C), and long-lasting temperature of 100 degrees C (1.2 +/- 0.4 vs. 0.1 +/- 0.1 s). CONCLUSION: In this experimental study, application of endovenous laser shows to be dominated by carbonization at the fibre tip. Although intraluminal laser-induced heat was heterogeneously distributed, with laser tip temperatures up to 1200 degrees C, heat dissipation was minimal. Continuous exposure of laser light appears to be better suited in EVLA than intermittent.

Cerebral revascularization.

During the last 10 years, there has been a revival of interest in cerebral revascularization procedures. Not only have significant progressions in surgical techniques been published, the use of more advanced diagnostic methods has led to a widening of the indications for cerebral bypass surgery. The purpose of this review is to outline the current techniques for extracranial-to-intracranial (EC/IC) and intracranial-to-intracranial (IC/IC) bypass surgery, as well as to identify the current indications for revascularization procedures based on the available literature. The excimer laser-assisted non-occlusive anastomosis (ELANA) technique is described in more detail because we think that this technique almost completely eliminates the risk of cerebral ischemia due to the temporary vessel occlusion which is currently used in conventional anastomosis techniques.

Third ventriculostomy.

Since its description by Dandy in 1922, several techniques have been used to perform third ventriculostomy under endoscopic control. Except for the blunt technique, in which the endoscope is used by itself to create the opening in the floor of the third ventricle, the other techniques require more than one instrument to perforate the floor of the ventricle and enlarge the ventriculostomy. The new device described is a sterilizable modified forceps that allows both the opening of the floor and the enlargement of the ventriculostomy in a simple and effective way. The new device has the following characteristics: 1) the tip of the forceps is thin enough to allow the easy perforation of the floor of the ventricle; 2) the inner surface of the jaws is smooth to avoid catching vessels of the basal cistern; and 3) the outer surface of the jaws has indentations that catch the edges of the opening to prevent them from slipping along the instrument's jaws. The ventricle floor is opened by gentle pressure of the forceps, which is slowly opened so that the edges of the aperture are caught by the distal outer indentation of the jaws, leading to an approximately 4-mm opening of the floor. This device has been used successfully in 10 consecutive patients. This new device allows surgeons to perform third ventriculostomy under endoscopic control in a very simple, quick, and effective way, avoiding the need for additional single-use instruments.

Contact laser-assisted neuroendoscopy can be performed safely by using pretreated 'black' fibre tips: experimental data.

BACKGROUND AND OBJECTIVE: Laser-assisted endoscopic neurosurgery by using conventional fibres requires the use of high-power laser light. Because this is potentially hazardous, we developed a pretreated fibre tip and evaluated tissue effects in vitro and in vivo. STUDY DESIGN/MATERIALS AND METHODS: By applying a highly absorbing coating to the front of the ball tip, almost all laser light is transformed into thermal energy, instantly producing ablative temperatures at the tip itself. The temperature distribution was examined by using an in vitro thermal imaging technique. The in vivo effect on rabbit cerebral tissue was examined macroscopically and histologically. RESULTS: By using a conventional fibre tip, ablation was not observed, despite the use of high energy and power (20 W for 10 seconds), whereas histology and thermal imaging demonstrated deleterious effects deeply into the cerebral tissue. By using the coated fibre tip, ablation was observed at low energy and power (1 W for 1 second) with thermal effects restricted to superficial structures. CONCLUSIONS: We show that laser-assisted neuroendoscopy can only be considered to be safe when pretreated "black" fibre tips are used, as laser light damages deep structures.

Endoillumination during vitrectomy and phototoxicity thresholds.

AIM: To assess the retinal phototoxicity hazards of and to provide safety margins for endoillumination during vitrectomy. METHODS: The absolute power and spectral distribution from various light sources and filter combinations that are commercially available for vitreous surgery were measured. The maximal exposure times based on the ICNIRP safety guidelines for photochemical and thermal injury of the aphakic eye were calculated. Additionally, the effect of various measures that reduce the risk of phototoxicity was evaluated. RESULTS: Measurements of the spectrum and energy indicated that the ICNIRP safety guidelines for photochemical retinal damage are exceeded within 1 minute for nine out of 10 combinations tested. With an additional 475 nm long pass filter, light levels below 10 mW, and a distance from light probe to retina of at least 10 mm, the allowable exposure time can be increased up to 13 minutes. Thermal damage can be anticipated when the light probe touches the retina. CONCLUSION: Commercially available light sources for endoillumination during vitrectomy are not safe with respect to photochemical retinal damage. Even with maximal precautions macular phototoxic damage remains a factual danger during vitrectomy.

Electrovaporization as a treatment modality for transurethral resection of the prostate: influence of generator type.

OBJECTIVES: To study the influence of the electrosurgical generator on the vaporization efficacy during electrovaporization (EVAP) using different vaporization elements. METHODS: Electrical properties of human prostatic (in vivo) and bovine myocardium (in vitro) tissue were measured under electroresection and electrovaporization conditions. The effective output power of four different generators ("old generation" Force 4 and Force 40 and "new generation" Force 300 and Force FX) was measured at different impedance loads. In vitro, the coagulation and vaporization capabilities of the electrosurgical generators in combination with resection and vaporization elements were studied on homogeneous tissue (bovine myocardium). RESULTS: The electrical impedance of human prostatic tissue and bovine myocardium increases from 400 to 1000 ohms when coagulated. The effective output power of the old generation electrosurgical devices depends strongly on tissue impedance. This implies that working on already coagulated tissue using such devices is not well controlled and not reproducible. By contrast, new generation electrosurgical devices correct for the higher impedance of coagulated tissue, thus delivering constant output power and corresponding tissue effects. CONCLUSIONS: For an effective application of the EVAP technique, the use of a new generation impedance independent electrosurgical unit is highly recommended.

Influence of decay of laser fibers during laser prostatectomy on clinical results.

Three types of sidefiring laser fibers (34 Urolase, 20 Ultraline, and 114 Prolase II) were visually inspected after a laser prostatectomy, and transmission measurements were performed using a power meter (Aquarius). The results were correlated with the clinical outcome. Despite differences in the amount of loss in transmission for the fibers used, we could not establish any significant effect on clinical outcome measures, such as improvement in maximal flow rate or symptom score. The visual aspect of the Urolase fibers was significantly related to the amount of transmission loss, whereas no such relation was found for the other two types of fibers. Prostate size and the total amount of energy delivered by the laser source also did not correlate with the clinical outcome. To determine the relation between the energy absorbed by the prostate and clinical outcome, a large number of patients must be evaluated, and any factor that can be controlled needs to be monitored. For the latter, the power meter as presented here is a useful complementary tool.

Laser-assisted neuroendoscopy using a neodymium-yttrium aluminum garnet or diode contact laser with pretreated fiber tips.

OBJECT: Although lasers have proved to be valuable in neuroendoscopy, surgeons are still not comfortable using high-energy laser endoscopic probes in proximity to vital structures such as the basilar artery in third ventriculostomy. The authors have developed a special laser catheter for use in neuroendoscopy; the object of this paper is to present their experimental and clinical experiences using the catheter. METHODS: This laser catheter is fitted with an atraumatic ball-shaped fiber tip that is pretreated with a layer of carbon particles. These carbon particles absorb approximately 90% of the energy emitted, which is very effectively converted into heat. As the heat is generated in this very thin layer of carbon coating, the temperature at the surface of the ball-shaped tip reaches ablative temperatures instantly at powers of only a few watts per second, which has enabled the authors to limit drastically the amount of laser light used and the length of exposure needed, thereby increasing safety even around critical structures. CONCLUSIONS: The authors present experimental data and their clinical experience using these pretreated fiber tips with a neodymium-yttrium aluminum garnet contact laser or a diode contact laser in 49 patients (22 males and 27 females) and a variety of procedures: third ventriculocistemostomy (33 patients), cyst fenestration (nine patients), colloid cyst resection (six patients), and fenestration of the septum pellucidum (one patient). There was no instance of mortality or increased morbidity. To date, the procedure success rate is 100% and the overall outcome success rate is 86%. The authors conclude that pretreated atraumatic ball-shaped fiber tips now make laser application safe and effective in a variety of neuroendoscopic procedures. Because of their low power range (only several watts), compact diode lasers will be the energy source of first choice.

Nonocclusive excimer laser-assisted end-to-side anastomosis.

BACKGROUND: High-flow extraintracranial bypass operation on the brain is a risky procedure because of the temporary occlusion of the intracranial portion of the internal carotid artery. We therefore developed a nonocclusive anastomosis technique in the experimental animal laboratory in 100 chronic and acute experiments in rabbits. METHODS: In 40 patients we interposed a venous transplant between the external carotid artery or one of its branches and the intracranial portion of the internal carotid artery. During the construction of the distal anastomosis the recipient artery was not occluded. The donor vessel was stitched to the exterior of the recipient vessel and an Excimer laser catheter (Medolas GmbH, Amberg, Germany) was introduced by way of an artificial side branch. The tip of the laser catheter created a hole in the wall of the recipient artery just inside the anastomosis. The cut-out full-thickness portion of recipient vessel wall remained attached to the tip of the laser catheter by way of high vacuum suction and was removed together with the laser catheter. The artificial side branch was occluded with a hemostatic clip. No interruption of blood flow in the recipient artery was induced during the making of the anastomosis. RESULTS: The procedure was well tolerated by the patients and a high patency rate was observed. CONCLUSIONS: The nonocclusive Excimer laser-assisted anastomosis technique is safe and yields a high long-term patency rate in neurosurgical patients. It cannot be excluded that there are indications for this method in coronary bypass surgery.

Laser light delivery systems for medical applications.

For medical applications, the choice of a delivery system will be governed by the characteristics of the laser system on the one hand and the tissue application on the other. The most important parts are the beam guide and the target optics. Most lasers have wavelengths in the visible and near-infrared and can be transported by silica fibres. For the mid- and far-IR other fibre materials or hollow waveguides are used. At the end of the waveguide or fibre, an optically active component is present to direct the beam and to control the power density on the target tissue. The laser beam can be delivered either by focusing handpieces and scanning devices to treat superficial areas or through microscopes, endoscopes and flexible fibres to treat areas almost anywhere inside the human body. The characteristics of the delivery systems can be determined looking at beam properties, transmission and thermal properties. The delivery of continuous wave or pulsed laser energy, contact or non-contact, will determine the contribution of optical, thermal and mechanical effects to the tissue. The practical use of laser delivery systems is illustrated by various clinical applications.

The modified excimer laser-assisted high-flow bypass operation.

BACKGROUND: To make high-flow revascularization of the brain possible, we developed an anastomosis technique that obviates temporary occlusion of the recipient artery. After connecting donor and recipient vessels, an Excimer laser catheter, introduced by way of an artificial side branch, creates a hole at the anastomosis site. Because of the inconsistency of the diameter of the hole produced by the closed laser tip, we developed an extensive modification of the procedure. METHODS: A new type of laser tip was developed, consisting of two layers of 60 mu laser fibers in a circular configuration with a diameter of 2.2 mm. The laser tip is fixed to the vessel wall at the anastomosis site by suction with a high-vacuum suction device, and a round piece of recipient vessel wall inside the anastomosis is cut out. RESULTS: Using the aorta as the recipient vessel in 30 rabbits, the modified technique was developed and, in the end, produced anastomoses with a high patency rate. In 25 patients, high-flow bypasses for different indications were made using a venous transplant interposed between the external carotid artery or one of its branches and the intracranial internal carotid artery, utilizing the modified Excimer laser technique for the intracranial anastomosis. Complications related to the new anastomosis technique were minimal, and a satisfactory patency rate was obtained. CONCLUSIONS: The modified Excimer laser-assisted anastomosis technique makes high-flow revascularization of the brain a safe procedure, since temporary occlusion of the recipient proximal brain artery during the making of the anastomosis is obviated.

Variation in output power of laser prostatectomy fibers: a need for power measurements.

OBJECTIVES: The aim of this study was the assessment of the quality of side-firing fibers that are being used for laser prostatectomy, either by a laser light transmission measurement or by visual inspection. METHODS: A power meter (Aquarius) was developed to measure the actual power transmitted through a side-firing fiber and delivered to the prostatic tissue. The power measurements were performed under clinical conditions, that is, under water and at relatively high input power. Furthermore, a protocol was developed for visual inspection of the fibers. Eight types of side-firing fibers were measured before use. Before and after a procedure, three fiber types were measured: ProLase II (28 samples), UltraLine (23 samples), and UroLase (44 samples). All these fibers were used in standard treatment protocols. RESULTS: At 60 W the transmission of new fibers (not used) ranged between 49% and 83% when compared to a bare fiber. After use, a large variation was found in transmitted power between different samples of one device. A correlation with total transmitted power was not present. At higher power input, vapor bubbles are generated at the tip of the fibers. Depending on the fiber design, these bubbles have a major impact on the transmission. Only for the UroLase fiber was there a significant correlation between visual inspection and the transmission of used samples at 10, 20, and 40 W. CONCLUSIONS: The transmission strongly varies between fibers and between different samples of one fiber during clinical use. Moreover, the transmission does not correlate with visual inspection. A power measurement during a clinical treatment will contribute to a more controlled procedure and to a better comparison of clinical laser prostatectomy studies.