Contemporary management of patients with atrial fibrillation in the Netherlands and Belgium: a report from the EORP-AF long-term general registry.

BACKGROUND: Contemporary data regarding the characteristics, treatment and outcomes of patients with atrial fibrillation (AF) are needed. We aimed to assess these data and guideline adherence in the EURObservational Research Programme on Atrial Fibrillation (EORP-AF) long-term general registry. METHODS: We analysed 967 patients from the EORP-AF long-term general registry included in the Netherlands and Belgium from 2013 to 2016. Baseline and 1­year follow-up data were gathered. RESULTS: At baseline, 887 patients (92%) received anticoagulant treatment. In 88 (10%) of these patients, no indication for chronic anticoagulant treatment was present. A rhythm intervention was performed or planned in 52 of these patients, meaning that the remaining 36 (41%) were anticoagulated without indication. Forty patients were not anticoagulated, even though they had an indication for chronic anticoagulation. Additionally, 63 of the 371 patients (17%) treated with a non-vitamin K antagonist oral anticoagulant (NOAC) were incorrectly dosed. In total, 50 patients (5%) were overtreated and 89 patients (9%) were undertreated. However, the occurrence of major adverse cardiac and cerebrovascular events (MACCE) was still low with 4.2% (37 patients). CONCLUSIONS: Overtreatment and undertreatment with anticoagulants are still observable in 14% of this contemporary, West-European AF population. Still, MACCE occurred in only 4% of the patients after 1 year of follow-up.

Sparseness of the trabecular pattern on dental radiographs: visual assessment compared with semi-automated measurements.

OBJECTIVE: In diagnostic imaging; human perception is the most prominent, yet least studied, source of error. A better understanding of image perception will help to improve diagnostic performance. This study focuses on the perception of coarseness of trabecular patterns on dental radiographs. Comparison of human vision with machine vision should yield knowledge on human perception. METHOD: In a study on identifying osteoporotic patients, dental radiographs were made from 505 post-menopausal women aged 45-70 years. Intra-oral radiographs of the lower and upper jaws were made. Five observers graded the trabecular pattern as dense, sparse or mixed. The five gradings were combined into a single averaged observer score per jaw. The radiographs were scanned and a region of interest (ROI) was indicated on each. The ROIs were processed with image analysis software measuring 25 image features. Pearson correlation and multiple linear regression were used to compare the averaged observer score with the image features. RESULTS: 14 image features correlated significantly with the observer judgement for both jaws. The strongest correlation was found for the average grey value in the ROI. Other features, describing that osteoporotic patients have fewer but bigger marrow spaces than controls, correlated less with the sparseness of the trabecular pattern than a rather crude measure for structure such as the average grey value. CONCLUSION: Human perception of the sparseness of trabecular patterns is based more on average grey values of the ROI than on geometric details within the ROI.

Minimum number of basis projections for caries detection with local CT.

OBJECTIVES: To investigate the relationship between the number of basis projections for local computed tomography (CT) and the detection of proximal caries and to find a minimum number of projections needed to maintain diagnostic accuracy. METHODS: We presented observers (n = 12) with stacks of both axial and vertical CT slices of 23 extracted teeth placed in a dry human mandible. The slices were prepared with 14, 20, 33 and 100 basis projections. The observers scored the proximal surfaces for the presence of caries on a 1-5 confidence scale. The performance of the varying number of projections was compared with conventional digital radiographs. RESULTS: The performance of all four CT modalities was significantly better than conventional radiographs (P = 0.005 to P = 0.021) and showed a consistent increase with the number of projections. Diagnostic performance depended significantly on lesion depth (P = 0.00), but not on observer. CONCLUSIONS: We conclude that the number of CT projections used can be reduced at least to 20 with the diagnostic performance still markedly better than that of conventional film, provided that the observer can make use of both axial and vertical stacks of CT slices.

Unusual catalytic triad of Escherichia coli outer membrane phospholipase A.

Escherichia coli outer membrane phospholipase A (OMPLA) is an integral membrane enzyme. OMPLA is active as a homodimer and requires calcium as a cofactor. The crystal structures of the monomeric and the inhibited dimeric enzymes were recently determined [Snijder, H. J., et al. (1999) Nature 401, 717-721] and revealed that OMPLA monomers are folded into a 12-stranded antiparallel beta-barrel. The active site consists of previously identified essential residues Ser144 and His142 in an arrangement resembling the corresponding residues of a serine hydrolase catalytic triad. However, instead of an Asp or Glu that normally is present in the triad of serine hydrolases, a neutral asparagine (Asn156) was found in OMPLA. In this paper, the importance of the catalytic Asn156 is addressed by site-directed mutagenesis studies. All variants were purified at a 30 mg scale, and were shown to be properly folded using SDS-PAGE and circular dichroism spectroscopy. Using chemical cross-linking, it was shown that all variants were not affected in their calcium-dependent dimerization properties. The Asn156Asp variant exhibited a 2-fold lower activity than wild-type OMPLA at neutral pH. Interestingly, the activity of the variant is 1 order of magnitude higher than that of the wild type at pH >10. Modest residual activities (5 and 2.5%, respectively) were obtained for the Asn156Ala and Asn156Gln mutants, showing that the active site of OMPLA is more tolerant toward replacements of this third residue of the catalytic triad than other serine hydrolases, and that the serine and histidine residues are minimally required for catalysis. In the X-ray structure of dimeric OMPLA, the cofactor calcium is coordinating the putative oxyanion via two water molecules. We propose that this may lessen the importance for the asparagine in the catalytic triad of OMPLA.

Control of the chemical step by leucine-31 of pancreatic phospholipase A2.

A well-defined region of pancreatic and other secreted phospholipase A2 (PLA2), which we call the i-face, makes a molecular contact with the interface to facilitate and control the events and processivity of the interfacial catalytic turnover cycles. The structural features of the i-face and its allosteric relationship to the active site remain to be identified. As a part of the calcium binding (26-34) loop, Leu-31 is located on the surface near the substrate binding slot of PLA2. Analysis of the primary rate and equilibrium parameters of the Leu-31 substitution mutants of the pig pancreatic PLA2 shows that the only significant effect of the substitution is to impair the chemical step at the zwitterionic interface in the presence of added NaCl, and only a modest effect is seen on kcat at the anionic interface. Leu-31 substitutions have little effect on the binding of the enzyme to the interface; the affinity for certain substrate mimics is modestly influenced in W3F, L31W double mutant. The fluorescence emission results with the double mutant show that the microenvironment of Trp-31 is qualitatively different at the zwitterionic versus anionic interfaces. At both of the interfaces Trp-31 is not shielded from the bulk aqueous environment as it remains readily accessible to acrylamide and water. The NaCl-induced change in the Trp-31 emission spectrum of the double mutant on the zwitterionic interface is similar to that seen on the binding to the anionic interface. Together, the kinetic and spectroscopic results show that the form of PLA2 at the zwitterionic interface (Ez) is distinguishably different from the catalytically more efficient form at the anionic interface (Ea). This finding provides a structural basis for the two-state model for kcat activation by the anionic interface. In conjunction with earlier results we suggest that neutralization of certain cationic residues of PLA2 exerts a control on the calcium loop through residue 31.

Structural evidence for dimerization-regulated activation of an integral membrane phospholipase.

Dimerization is a biological regulatory mechanism employed by both soluble and membrane proteins. However, there are few structural data on the factors that govern dimerization of membrane proteins. Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme which participates in secretion of colicins in Escherichia coli. In Campilobacter and Helicobacter pylori strains, OMPLA is implied in virulence. Its activity is regulated by reversible dimerization. Here we report X-ray structures of monomeric and dimeric OMPLA from E. coli. Dimer interactions occur almost exclusively in the apolar membrane-embedded parts, with two hydrogen bonds within the hydrophobic membrane area being key interactions. Dimerization results in functional oxyanion holes and substrate-binding pockets, which are absent in monomeric OMPLA. These results provide a detailed view of activation by dimerization of a membrane protein.

Introduction of a C-terminal aromatic sequence from snake venom phospholipases A2 into the porcine pancreatic isozyme dramatically changes the interfacial kinetics.

Porcine pancreatic phospholipase A2 (PLA2) was modified by single and multiple site-directed mutations at sites thought to be involved in interfacial binding. Charged and polar residues in the C-terminal region were replaced by aromatic residues on the basis of an analogy with snake venom PLA2s, which display high affinity for a zwitterionic interface. The PLA2 variants constructed were N117W, N117W/D119Y and K116Y/N117W/D119Y. Titration with micelles of a zwitterionic substrate suggests that the variants N117W and K116Y/N117W/D119Y possess improved ability to bind to the micellar substrate interface, relative to the wild-type enzyme. Improved interfacial binding was confirmed by direct binding studies with micelles of a zwitterionic substrate analogue, indicating up to five times higher affinity for both variants. Interfacial binding is not improved for the variant N117W/D119Y. Maximal enzyme velocities (Vapp./max) with the zwitterionic substrate were between 25 and 75% of that of the wild-type enzyme. However, competitive inhibition and direct binding studies with a strong inhibitor revealed that the affinity for substrate present at the interface (Km*) is perturbed by the mutations made. For the variant N117W, the slight decrease observed in Vapp./max is most likely made up of a 24-fold reduction in catalytic turnover (kcat) and 18-fold improved substrate binding (Km*).

Modifying the substrate specificity of staphylococcal lipases.

The lipase from Staphylococcus hyicus (SHL) displays a high phospholipase activity whereas the homologous S. aureus lipase (SAL) is not active or hardly active on phospholipid substrates. Previously, it has been shown that elements within the region comprising residues 254-358 are essential for the recognition of phospholipids by SHL. To specifically identify the important residues, nine small clusters of SHL were individually replaced by the corresponding SAL sequence within region 254-358. For cloning convenience, a synthetic gene fragment of SHL was assembled, thereby introducing restriction sites into the SHL gene and optimizing the codon usage. All nine chimeras were well-expressed as active enzymes. Eight chimeras showed lipase and phospholipase activities within a factor of 2 comparable to WT-SHL in standard activity assays. Exchange of the polar SHL region 293-300 by the more hydrophobic SAL region resulted in a 32-fold increased k(cat)/K(m) value for lipase activity and a concomitant 68-fold decrease in k(cat)/K(m) for phospholipase activity. Both changes are due to effects on catalytic turnover as well as on substrate affinity. Subsequently, six point mutants were generated; G293N, E295F, T297P, K298F, I299V, and L300I. Residue E295 appeared to play a minor role whereas K298 was the major determinant for phospholipase activity. The mutation K298F caused a 60-fold decrease in k(cat)/K(m) on the phospholipid substrate due to changes in both k(cat) and K(m). Substitution of F298 by a lysine in SAL resulted in a 4-fold increase in phospholipase activity. Two additional hydrophobic to polar substitutions further increased the phospholipase activity 23-fold compared to WT-SAL.

Catalytic role of the active site histidine of porcine pancreatic phospholipase A2 probed by the variants H48Q, H48N and H48K.

The catalytic contribution of His48 in the active site of porcine pancreatic phospholipase A2 was examined using site-directed mutagenesis. Replacement of His48 by lysine (H48K) gives rise to a protein having a distorted lipid binding pocket. Activity of this variant drops below the detection limit which is 10(7)-fold lower than that of the wild-type enzyme. On the other hand, the presence of glutamine (H48Q) or asparagine (H48N) at this position does not affect the structural integrity of the enzyme as can be derived from the preserved lipid binding properties of these variants. However, the substitutions H48Q and H48N strongly reduce the turnover number, i.e. by a factor of 10(5). Residual activity is totally lost after addition of a competitive inhibitor. We conclude that proper lipid binding on its own accelerates ester bond hydrolysis by a factor of 10(2). With the selected variants, we were also able to dissect the contribution of the hydrogen bond between Asp99 and His48 on conformational stability, being 5.2 kJ/mol. Another hydrogen bond with His48 is formed when the competitive inhibitor (R)-2-dodecanoylamino-hexanol-1-phosphoglycol interacts with the enzyme. Its contribution to binding of the inhibitor in the presence of an interface was found to be 5.7 kJ/mol.

Outer membrane phospholipase A is dimeric in phospholipid bilayers: a cross-linking and fluorescence resonance energy transfer study.

In the cell, the activity of outer membrane phospholipase A (OMPLA) is strictly regulated to prevent uncontrolled breakdown of the membrane lipids. Previously, it has been shown that the enzymatic activity is modulated by reversible dimerization. The current studies were carried out to define the oligomeric state of OMPLA in a membrane and to investigate the activation process. Three single-cysteine variant proteins H26C, H234C, and S144C were produced and purified to homogeneity. Using maleimido-based homo-bifunctional cross-linking reagents, H26C could be efficiently cross-linked as assessed by SDS-PAGE, whereas S144C and H234C could not be cross-linked. These data suggest that residue 26 is located close to the dimer symmetry axis. H26C was specifically labeled with 5-({[(2-iodoacetyl)amino]ethyl}amino)naphthalene-1-sulfonic acid and N,N'-dimethyl-N-(iodoacetyl)-N-(7-nitrobenz-2-oxa-1, 3-diazol-4-yl)ethylenediamine as the fluorescent energy donor and acceptor, respectively, and dimerization was investigated using fluorescence resonance energy transfer (FRET). Quenching of the donor in the presence of the acceptor demonstrated the dimeric nature of OMPLA, in agreement with cross-linking data. The observed FRET effect was dependent on the cofactor calcium, and the presence of substrate, indicating the specificity of the dimerization process. The labeled protein was reconstituted in phospholipid vesicles. In bilayers, OMPLA exhibited low activity and was dimeric as assessed by FRET. Addition of detergent resulted in a 70-fold increase in activity, while the protein remained dimeric. The results are discussed in terms of the activation of dimeric OMPLA due to changes in the physical state of the bilayer which occur upon perturbation of the membrane integrity.

NMR studies of Fusarium solani pisi cutinase in complex with phosphonate inhibitors.

The backbone dynamics of Fusarium solani pisi cutinase in complex with a phosphonate inhibitor has been studied by a variety of nuclear magnetic resonance experiments to probe internal motions on different time scales. The results have been compared with dynamical studies performed on free cutinase. In solution, the enzyme adopts its active conformation only upon binding the inhibitor. While the active site Ser120 is rigidly attached to the stable alpha/beta core of the protein, the remainder of the binding site is very flexible in the free enzyme. The other two active site residues Asp175 and His188 as well as the oxyanion hole residues Ser42 and Gln121 are only restrained into their proper positions upon binding of the substrate-like inhibitor. The flap helix, which opens and closes the binding site in the free molecule, is also fixed in the cutinase-inhibitor complex. Our results are in contrast with the X-ray analysis results, namely that in the protein crystal, free cutinase has a well-defined active site and a preformed oxyanion hole and that it does not need any rearrangements to bind its substrate. Our solution studies show that cutinase does need conformational rearrangements to bind its substrate, which may form the rate-limiting step in catalysis.

Rational design of alpha-keto triglyceride analogues as inhibitors for Staphylococcus hyicus lipase.

We have synthesized a series of alpha-keto triglyceride analogues as inhibitors for the lipase from Staphylococcus hyicus (SHL). Hydrolysis at positions 1 and 2 was prevented by replacement of the ester bonds by nonhydrolyzable ether, carbamoyl, or amide bonds, and an alpha-keto fatty acid was introduced at position 3. Such compounds act as competitive inhibitors of SHL. Inhibition must be caused by the presence of the alpha-keto functions, since the compounds containing an ester or a hydroxyl group in position 3 did not inhibit the enzyme. We propose that our inhibitors react with the active site Ser of the lipase, hereby mimicking the tetrahedral intermediate occurring in substrate hydrolysis. We conclude that the localization of the alpha-keto triglycerides is very important for inhibition because only those compounds which are insoluble in water are lipase inhibitors. In addition, other specific protein-inhibitor interactions, probably with the carbonyl oxygen at position 1 and/or 2, improve inhibitor binding. This makes the compounds with amide or carbamoyl groups at positions 1 and 2 better inhibitors than their ether counterparts. The inhibitory power could be improved further by replacing the oxygen at position 3 by an amido group. The resulting inhibitor 1, 2-diethylcarbamoyl-3-amido-alpha-ketododecanoylglycerol has a Ki value of 0.008 mol %, indicating that it binds approximately 125-fold tighter than the substrate. These results illustrate that effective lipase inhibitors can be designed by combining an alpha-keto group with good micellar solubility and optimal protein-inhibitor interactions.

Bacteriocin release protein triggers dimerization of outer membrane phospholipase A in vivo.

Bacteriocin release protein is known to activate outer membrane phospholipase A (OMPLA), which results in the release of colicin from Escherichia coli. In vivo chemical cross-linking experiments revealed that the activation coincides with dimerization of OMPLA. Permeabilization of the cell envelope and dimerization were characterized by a lag time of 2 h.

Half-of-the-sites reactivity of outer-membrane phospholipase A against an active-site-directed inhibitor.

The reaction of a novel active-site-directed phospholipase A1 inhibitor with the outer-membrane phospholipase A (OMPLA) was investigated. The inhibitor 1-p-nitrophenyl-octylphosphonate-2-tridecylcarbamoyl-3-et hanesulfonyl -amino-3-deoxy-sn-glycerol irreversibly inactivated OMPLA. The inhibition reaction did not require the cofactor calcium or an unprotonated active-site His142. The inhibition of the enzyme solubilized in hexadecylphosphocholine micelles was characterized by a rapid (t1/2 = 20 min) and complete loss of enzymatic activity, concurrent with the covalent modification of 50% of the active-site serines, as judged from the amount of p-nitrophenolate (PNP) released. Modification of the remaining 50% occurred at a much lower rate, indicative of half-of-the-sites reactivity against the inhibitor of this dimeric enzyme. Inhibition of monomeric OMPLA solubilized in hexadecyl-N,N-dimethyl-1-ammonio-3-propanesulfonate resulted in an equimolar monophasic release of PNP, concurrent with the loss of enzymatic activity (t1/2 = 14 min). The half-of-the-sites reactivity is discussed in view of the dimeric nature of this enzyme.

Interfacial binding of cutinase rather than its catalytic activity determines the steady state interfacial tension during oil drop lipid hydrolysis.

Hydrolysis of triglycerides by cutinase from Fusarium solani pisi causes in oil drop tensiometer experiments a decrease of the interfacial tension. A series of cutinase variants with amino acid substitutions at its molecular surface yielded different values of the steady state interfacial tension. This tension value poorly correlated with the specific activity as such nor with the total activity (defined as the specific activity multiplied by the amount of enzyme bound) of the cutinase variants. Moreover, it appeared that at activity levels above 15% of that of wild type cutinase the contribution of hydrolysis to the decrease of the tension is saturating. A clear positive correlation was found between the interfacial tension plateau value and the interfacial binding of cutinase, as determined with attenuated total reflection Fourier transformed infrared spectroscopy (ATR-FTIR). These results indicate that the interfacial steady state level is not determined by the rate of hydrolysis, but mainly by the interfacial binding of cutinase.

Engineering the disulphide bond patterns of secretory phospholipases A2 into porcine pancreatic isozyme. The effects on folding, stability and enzymatic properties.

Secretory phospholipases A2 (PLA2s) are small homologous proteins rich in disulphide bridges. These PLA2s have been classified into several groups based on the disulphide bond patterns found [Dennis, E. A. (1997) Trends Biochem. Sci. 22, 1-2]. To probe the effect of the various disulphide bond patterns on folding, stability and enzymatic properties, analogues of the secretory PLA2s were produced by protein engineering of porcine pancreatic PLA2. Refolding experiments indicate that small structural variations play an important role in the folding of newly made PLA2 analogues. Introduction of a C-terminal extension together with disulphide bridge 50-131 gives rise to an enzyme that displays full enzymatic activity having increased conformational stability. In contrast, introduction of a small insertion between positions 88 and 89 together with disulphide bridge 86-89 decreases the catalytic activity significantly, but does not change the stability. Both disulphide bridges 11-77 and 61-91 are important for the kinetic properties and stability of the enzyme. Disulphide bridge 11-77, but not 61-91, was found to be essential to resist tryptic breakdown of native porcine pancreatic PLA2.

Identification of a calcium binding site in Staphylococcus hyicus lipase: generation of calcium-independent variants.

In this study we have identified the presence of a high-affinity binding site for calcium in the lipase from Staphylococcus hyicus. By means of isothermal titration calorimetry we showed that the enzyme binds one calcium per molecule of enzyme with a dissociation constant of 55 microM. The residual activity of the apoenzyme compared to the activity in the presence of calcium ions varies from 65% at 10 degreesC to nearly zero at 40 degreesC. On the basis of primary sequence alignment with other staphylococcal lipases and the lipases from Bacillus thermocatenulatus and from Pseudomonas glumae in combination with site-directed mutagenesis, aspartates 354 and 357 could be identified as calcium ligands. Kinetic measurements with the D357E variant showed that replacement of Asp357 by a glutamate decreased the affinity for calcium ions 30-fold. Introduction of a lysine, an asparagine, or an alanine at position 357 and of a lysine or an asparagine at position 354 resulted in calcium-independent variants. Isothermal titration calorimetry confirmed the loss of calcium binding. Although the D357K, D357N, and D357A variants did not bind calcium, at room temperature they were nearly as active as wild-type lipase in the presence of calcium, but at elevated temperatures these calcium-independent lipases showed a reduced activity. Over the whole temperature range the activities of the D354K and D354N variants are significantly lower than wild-type enzyme in the presence of calcium and are comparable to the activity of the wild-type apoenzyme. Our results show that binding of calcium is important for the structural stabilization of staphylococcal lipases (and possibly other lipases) and that it is possible to engineer calcium-independent variants on the basis of limited structural homology with another lipase.

Activity and stability of chemically modified Candida antarctica lipase B adsorbed on solid supports.

The effect of various covalent chemical modifications on the transesterification activity and stability of adsorbed lipase B from Candida antarctica (CALB) was studied in 2-butanone and o-xylene. CALB species modified with either polyethylene glycol 2000 monomethyl ether (MPEG), polyethylene glycol 300 mono-octyl ether (OPEG) or n-octanol (OCT) were used in combination with a hydrophobic (Accurel) and a hydrophilic (Duolite) support. The thermostabilities of adsorbed CALB in both solvents, and that of free CALB in o-xylene were not influenced by the modifications. In contrast, the thermostability of free CALB in 2-butanone decreased 2.5-fold after MPEG modification and increased 1.5-fold after modification with OPEG and n-octanol, compared to that of native CALB. The activities of the native and modified CALB species were up to 9-fold higher after adsorption onto Accurel than those of the corresponding free enzymes. Adsorption of these enzyme species onto Duolite only resulted in a 2- to 3-fold increase in the activity of OPEG- and OCT-modified CALB. The modified CALB species adsorbed onto Accurel show similar or up to 2-fold lower activities than do native adsorbed CALB species, while 1.5- to 6-fold higher activities were found for modified CALB species adsorbed onto Duolite. We propose that hydrophobic modifiers induce conformational changes of CALB during adsorption on a hydrophobic support whereas all three modifiers protect CALB from structural alterations during adsorption onto a hydrophilic support.

Cutinase binding and activity at the triolein-water interface monitored by oil drop tensiometry.

Changes of the oil-water interfacial tension resulting from binding of Fusarium solani pisi cutinase and subsequent lipid hydrolysis were investigated using the oil drop technique. An ELISA was developed to determine the amount of cutinase bound to the triolein-water interface after biotinylation of the enzyme. Cutinase irreversibly adsorbs to a maximum value of about 2 mg/m2. A minimal specific activity of 110 mumol/min/mg was calculated for cutinase acting on a single oil droplet, which is close to the activity found for triglyceride emulsions. At a maximum surface load cutinase could generate one monolayer of fatty acid products per second at the interface. It was found that oleic acid rapidly dissolves into the oil phase under the conditions used. The interfacial tension measured reflects the adsorption of cutinase to the oil droplet and also responds to the fate of the hydrolysis products. A model is presented that describes the catalytic events at the oil-water interface during lipid hydrolysis.

Role of the cofactor calcium in the activation of outer membrane phospholipase A.

The enzymatic activity of the outer membrane phospholipase A (OMPLA), an integral membrane protein of Escherichia coli, is regulated by dimerization for which the cofactor Ca2+ is required. In this study, the interaction of Ca2+ with OMPLA was characterized, with an emphasis on the role of the cofactor in the activation process and dimerization. Kinetic experiments were done in which the enzyme was solubilized in mixed micelles of substrate and different detergents. It appeared that the affinity of OMPLA for Ca2+ was high (12 microM) if alkylphosphocholines were used as detergent, moderate (62 microM) if sulfobetaines were used, and very low (24 mM) if alkylpolyoxyethylene glycols were used. These results show that there is a strong modulation of the calcium binding properties of OMPLA by the lipid environment. In the presence of hexadecylphosphocholine micelles, the affinity of OMPLA for Ca2+ was determined by three direct binding techniques. Using gel filtration, it appeared that OMPLA has one high-affinity site (Kd approximately 36 microM) and a second site with moderate affinity (Kd approximately 358 microM). Sulfonylated-OMPLA, in which the active site serine had been covalently modified with hexadecanesulfonylfluoride, was used as a mimic for the acyl-enzyme intermediate. In gel filtration experiments, this sulfonylated-OMPLA displayed binding of two Ca2+ per enzyme monomer both with similar high affinity (Kd approximately 48 microM), indicative of a strong synergistic effect of active site occupation and the affinity of the second Ca2+ binding site. Isothermal titration calorimetric measurements confirmed only the presence of a high-affinity Ca2+ binding site, whereas in fluorescence experiments only the binding of the second Ca2+ could be observed. Chemical cross-linking was applied to investigate which of the two Ca2+ sites is involved in dimerization. OMPLA was monomeric in the absence of Ca2+, whereas already at low Ca2+ concentrations the enzyme was converted to its dimeric form. Therefore, we suggest that the first Ca2+ plays a role in the stabilization of the dimeric state of the enzyme. The role of the second Ca2+ and the observed synergy between active site occupancy and Ca2+ affinity are discussed.