Exfoliation procedure-dependent optical properties of solution deposited MoS2 films.

The development of high-precision large-area optical coatings and devices comprising low-dimensional materials hinges on scalable solution-based manufacturability with control over exfoliation procedure-dependent effects. As such, it is critical to understand the influence of technique-induced transition metal dichalcogenide (TMDC) optical properties that impact the design, performance, and integration of advanced optical coatings and devices. Here, we examine the optical properties of semiconducting MoS2 films from the exfoliation formulations of four prominent approaches: solvent-mediated exfoliation, chemical exfoliation with phase reconversion, redox exfoliation, and native redox exfoliation. The resulting MoS2 films exhibit distinct refractive indices (n), extinction coefficients (k), dielectric functions (ε1 and ε2), and absorption coefficients (α). For example, a large index contrast of Δn ≈ 2.3 is observed. These exfoliation procedures and related chemistries produce different exfoliated flake dimensions, chemical impurities, carrier doping, and lattice strain that influence the resulting optical properties. First-principles calculations further confirm the impact of lattice defects and doping characteristics on MoS2 optical properties. Overall, incomplete phase reconfiguration (from 1T to mixed crystalline 2H and amorphous phases), lattice vacancies, intraflake strain, and Mo oxidation largely contribute to the observed differences in the reported MoS2 optical properties. These findings highlight the need for controlled technique-induced effects as well as the opportunity for continued development of, and improvement to, liquid phase exfoliation methodologies. Such chemical and processing-induced effects present compelling routes to engineer exfoliated TMDC optical properties toward the development of next-generation high-performance mirrors, narrow bandpass filters, and wavelength-tailored absorbers.

Effective Optical Properties of Laterally Coalescing Monolayer MoS2.

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) exhibit compelling dimension-dependent exciton-dominated optical behavior influenced by thickness and lateral quantum confinement effects. Thickness quantum confinement effects have been observed; however, experimental optical property assessment of nanoscale lateral dimension monolayer TMDCs is lacking. Here, we employ ex situ spectroscopic ellipsometry to evaluate laterally coalescing monolayer metalorganic chemical vapor deposited MoS2. A multisample analysis is used to constrain Bruggeman and Maxwell-Garnett effective medium approximations and the effective dielectric functions are derived for laterally coalesced and uncoalesced MoS2 films (∼10-94% surface coverage for ∼10-140 nm lateral grain sizes). This analysis demonstrates the ability to probe MoS2 optical exciton behavior at growth-relevant grain sizes in relation to chemical vapor nucleation density, ripening, and lateral growth conditions. Our analysis is pertinent toward expected in situ epitaxial 2D TMDC film growth metrology to enable the facile development of monolayer films with targeted process-dependent optical properties.

Determining and scaling continuous-wave, laser-induced damage thresholds of thin reflectors.

Scalable and repeatable determinations of continuous wave (CW) laser-induced damage thresholds are required to develop materials for applications ranging from deformable mirrors to momentum transfer. Current standards assume sample geometries and beam conditions where CW damage thresholds are constant in linear power density, depend strongly on substrate thermal conductivity, and are insensitive to environmental conditions. In this work, the CW laser response of thin PET films with a reflective Al/MgF2 coating are experimentally assessed over a range of beam diameters and irradiances. The laser-induced damage threshold decreases with increased exposure time down to a temporally-independent irradiance, decreases with increased beam diameter to an irradiance that is independent of spot size, and depends on radiative and convective cooling. Models are used to define the minimum spot size and exposure time required to achieve such constant damage threshold irradiances for thin reflectors.

Surface modification of bulk titanium substrates for biomedical applications via low-temperature microwave hydrothermal oxidation.

Micro-to-nanoscale surface topographies of orthopaedic and dental implants can affect fluid wetting and biological response. Nanoscale features can be superimposed on microscale roughness of titanium (Ti) surfaces at high temperatures, resulting in increased osteoblast differentiation. However, high temperatures can compromise mechanical properties of the bulk material. Here, we have developed a novel low-temperature microwave hydrothermal (MWHT) oxidation process for nanomodification of microrough (SLA) Ti surfaces. Nanoscale protuberances (20 -100 nm average diameter) were generated on SLA surfaces via MWHT treatment at 200°C in H2 O, or in aqueous solutions of H2 O2 or NH4 OH, for times ranging from 1 to 40 h. The size, shape, and crystalline content of the nanoprotuberances varied with the solution used and treatment time. The hydrophilicity of all MWHT-modified surfaces was dramatically enhanced. MG63 and normal human osteoblasts (NHOsts) were cultured on MWHT-treated SLA surfaces. While most responses to MWHT-modified surfaces were comparable to those seen on SLA controls, the MWHT-generated nanotopography reduced osteocalcin production by NHOst cells, suggesting that specific nanotopographic characteristics differentially mediate osteoblast phenotypic expression. MWHT processing provides a scalable, low-temperature route for tailoring nanoscale topographies on microroughened titanium implant surfaces with significantly enhanced wetting by water, without degrading the microscale surface structure of such implants. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 782-796, 2018.

Photostimulated control of laser transmission through photoresponsive cholesteric liquid crystals.

Cholesteric liquid crystals (CLCs) are selectively reflective optical materials, the color of which can be tuned via electrical, thermal, mechanical, or optical stimuli. In this work, we show that self-regulation of the transmission of a circularly polarized incident beam can occur upon phototuning of the selective reflection peak of a photosensitive CLC mixture towards the pump wavelength. The autonomous behavior occurs as the red-shifting selective reflection peak approaches the wavelength of the incident laser light. Once the red-edge of the CLC bandgap and incident laser wavelength overlap, the rate of tuning dramatically slows. The dwell time (i.e., duration of the overlap of stimulus wavelength with CLC bandgap) is shown to depend on the radiation wavelength, polarization, and intensity. Necessary conditions for substantial dwell time of the CLC reflection peak at the pump beam wavelength include irradiation with low intensity light (~1mW/cm²) and the utilization of circularly polarized light of the same handedness as the helical structure within the CLC. Monitoring the optical properties in both reflection and transmission geometries elucidates differences associated with attenuation of the light through the thickness of the CLC film.

Rapid bioenabled formation of ferroelectric BaTiO3 at room temperature from an aqueous salt solution at near neutral pH.

A 12-mer peptide, identified through phage display biopanning, has been used for the first time to induce the rapid formation of ferroelectric (tetragonal) nanocrystalline BaTiO3 at room temperature from an aqueous salt precursor solution at near neutral pH. BaTiO3 is widely used in capacitors, thermistors, displays, and sensors owing to its attractive dielectric, ferroelectric, pyroelectric, optical, and electrochemical properties. Two 12-mer peptides (BT1 and BT2) were selected from a phage-displayed peptide library via binding to tetragonal BaTiO3 powder. While these peptides possessed various types of amino acids, 8 of the 12 amino acids were common to both peptides. Each of these peptides induced the formation of faceted nanoparticles (50-100 nm diameter) from an aqueous precursor solution. X-ray diffraction and selected area electron diffraction patterns obtained from these faceted nanoparticles were consistent with the BaTiO3 compound. Rietveld analyses of the X-ray diffraction patterns yielded good fits to tetragonal crystal structures, with the BaTiO3 formed in the presence of the BT2 peptide exhibiting the most tetragonal character. A coating of the latter BaTiO3 nanoparticles exhibited polarization hysteresis (a well-known characteristic of ferroelectric materials) at room temperature and a relative permittivity of 2200. Such rapid, peptide-induced precipitation at room temperature provides new opportunities for direct BaTiO3 formation on low-melting or reactive materials (e.g., plastics, cloths, bio-organics) and the low temperature integration of BaTiO3 into electronic devices (e.g., on silicon or flexible polymer substrates).