Antibacterial activity improvement of dental glass-ceramic by incorporation of AgVO3 nanoparticles.

OBJECTIVE: This study aimed to investigate the role of the incorporation of an antibacterial nanoceramic (AgVO3) on the properties of a restorative dental glass-ceramic. METHOD: A commercially available restorative glass-ceramic, commonly designated as porcelain (IPS d.SIGN) was functionalized with an antibacterial agent (nanostructured ß-AgVO3), synthesized by a hydrothermal route. Both functionalized and pristine samples were processed according to the manufacturer's instructions. All samples were characterized by X-ray diffraction, Rietveld refinement, particle size distribution, Scanning Electron Microscopy, chemical solubility, and Inductively Coupled Plasma Spectroscopy. Their antibacterial potential (Mueller-Hinton test) was analyzed against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). RESULTS: The commercial glass-ceramic showed leucite (KAlSi2O6) as the only detectable crystalline phase, and, for both strains, no antibacterial activity could be detected in the Mueller-Hinton agar plates test. A monophasic, needle-shaped, and nanometric ß-AgVO3 powder was successfully synthesized by a simple hydrothermal route. After thermal treatment, glass-ceramic samples containing different percentages of ß-AgVO3 showed a second crystalline phase of microline [K0.95(AlSi3O8)]. For modified samples, inhibition halos were easily visible on the Mueller-Hinton test, which ranged from 11.1 ± 0.5 mm to 16.6 ± 0.5 mm and 12.7 ± 0.3 mm to 15.5 ± 0.3 mm in the S. aureus and E.coli cultures, respectively, showing that the halos formed were dose-dependent. Also, increasing the percentage of ß-AgVO3 promoted a significant increase in chemical solubility, from 72 µg/cm2 (samples with 1 wt% of ß-AgVO3) to 136 µg/cm2 (samples with 2 wt% of ß-AgVO3), which was associated with the silver and vanadium ions released from the glass matrix. SIGNIFICANCE: Our in vitro results indicate that IPS d.SIGN, as most of the dental glass-ceramics, do not exhibit antibacterial activity per se. Nonetheless, in this concept test, we demonstrated that it is possible to modify dental veneering materials giving them antibacterial properties by adding at least 2 wt% of ß-AgVO3, a nanomaterial easily synthesized by a simple route.

Injectable MnSr-doped brushite bone cements with improved biological performance.

Good mechanical properties and high injectability are the major requirements to ensure widespread application of calcium phosphate cements (CPCs) as bone substitutes in minimally invasive surgeries. However, obtaining CPCs that exhibit a good compromise between these two properties as well as good biological performance is still a great challenge. This study presents novel solutions to improve these properties, which include (i) co-doping ß-tricalcium phosphate (ß-TCP) powder with Sr and Mn, and (ii) adding small amounts of saccharides (sucrose or fructose) to the setting-liquid solution. The combination of these two strategies enabled full injectability and significantly increased the wet compressive strength of CPCs in comparison to undoped or solely Sr-doped CPCs. Furthermore, the proliferative response of human MG63 osteoblastic cells, their rate of collagen-I secretion, and particularly their growth behaviour on the cement surfaces were also enhanced. The overall improved relevant properties of Mn/Sr co-doped CPCs with added sucrose, including in vitro biological performance, renders them very promising materials for bone regeneration and tissue engineering.

New portable instrument for the measurement of thermal conductivity in gas process conditions.

The development of high temperature gas sensors for the monitoring and determination of thermophysical properties of complex process mixtures at high temperatures faces several problems, related with the materials compatibility, active sensing parts sensitivity, and lifetime. Ceramic/thin metal films based sensors, previously developed for the determination of thermal conductivity of molten materials up to 1200 °C, were redesigned, constructed, and applied for thermal conductivity measuring sensors. Platinum resistance thermometers were also developed using the same technology, to be used in the temperature measurement, which were also constructed and tested. A new data acquisition system for the thermal conductivity sensors, based on a linearization of the transient hot-strip model, including a portable electronic bridge for the measurement of the thermal conductivity in gas process conditions was also developed. The equipment is capable of measuring the thermal conductivity of gaseous phases with an accuracy of 2%-5% up to 840 °C (95% confidence level). The development of sensors up to 1200 °C, present at the core of the combustion chambers, will be done in a near future.

Effects of Mn-doping on the structure and biological properties of ß-tricalcium phosphate.

Doping calcium phosphates with trace elements that exist in bone tissues is beneficial in terms of cell-material interactions and in vivo performance of the bone grafts made thereof. Manganese (Mn) is an essential element for normal growth and metabolism of bone tissues, but studies reporting the effects of Mn-doping calcium phosphates are scarce. The present study investigated the influence of Mn-doping on the structure, morphology and biological properties of ß-tricalcium phosphate [ß-Ca3(PO4)2] (ß-TCP). Mn-doped (MnTCP) powders, with Mn contents varying from 0 to 10 mol%, were obtained through an aqueous precipitation method followed by heat treatment at 800 °C. The successful incorporation of Mn into ß-TCP structure was proved through quantitative X-ray diffraction (XRD) phase analysis coupled with structural Rietveld refinement. Increasing Mn concentrations led to decreasing trends of a- and c-axis lattice parameters, and Mn-doping also significantly affected the morphology of ß-TCP powders. In vitro proliferation and differentiation assays of MC3T3-E1 osteoblastic-like cells, grown in the presence of the powders, revealed that the biological benefits of Mn-doped ß-TCP are limited to lower Mn incorporation levels and potentially related to their surface microstructure. The Mn1-ßTCP composition revealed the best set of bioactivity properties, potentially a good candidate for future applications of ß-TCP materials in osteoregeneration.

Synthesis, mechanical and biological characterization of ionic doped carbonated hydroxyapatite/ß-tricalcium phosphate mixtures.

The influence of ionic substituents in calcium phosphates intended for bone and tooth replacement biomedical applications is an important research topic, owing to the essential roles played by trace elements in biological processes. The present study investigates the mechanical and biological evaluation of ionic doped hydroxyapatite/ß-tricalcium phosphate mixtures which have been prepared by a simple aqueous precipitation method. Heat treating the resultant calcium phosphates in a carbonated atmosphere led to the formation of ionic doped carbonated hydroxyapatite/ß-tricalcium phosphate mixtures containing the essential ions of biological apatite. The structural analysis determined by Rietveld refinement confirmed the presence of hydroxyapatite as the main phase, together with a considerable amount of ß-tricalcium phosphate. Such phase assemblage is essentially due to the influence of substituted ions during synthesis. The results from mechanical tests proved that carbonate substitutions are detrimental for the mechanical properties of apatite-based ceramics. In vitro proliferation assays of osteoblastic-like cells (MC3T3-E1 cell line) to powders revealed that carbonate incorporation can either delay or accelerate MC3T3 proliferation, although reaching the same proliferation levels as control cells after 2 weeks in culture. Further, the powders enable pre-osteoblastic differentiation in a similar manner to control cells, as indirectly measured by ALP activity and Type-I collagen medium secretion.

Biological responses of brushite-forming Zn- and ZnSr- substituted beta-tricalcium phosphate bone cements.

The core aim of this study was to investigate zinc (Zn)- and zinc and strontium (ZnSr)-containing brushite-forming beta-tricalcium phosphate (TCP) cements for their effects on proliferation and differentiation of osteoblastic-like cells (MC3T3-E1 cell line) as well as for their in vivo behaviour in trabecular bone cylindrical defects in a pilot study. In vitro proliferation and maturation responses of MC3T3-E1 osteoblastic-like cells to bone cements were studied at the cellular and molecular levels. The Zn- and Sr-containing brushite cements were found to stimulate pre-osteoblastic proliferation and osteoblastic maturation. Indeed, MC3T3-E1 cells exposed to the powdered cements had increased proliferative rates and higher adhesiveness capacity, in comparison to control cells. Furthermore, they exhibited higher alkaline phosphatase (ALP) activity and increased Type-I collagen secretion and fibre deposition into the extracellular matrix. Proliferative and collagen deposition properties were more evident for cells grown in cements doped with Sr. The in vivo osteoconductive propertiesof the ZnCPC and ZnSrCPC cements were also pursued. Histological and histomorphometric analyses were performed at 1 and 2 months after implantation, using carbonated apatite cement (Norian SRS) as control. There was no evidence of cement-induced adverse foreign body reactions, and furthermore ZnCPC and ZnSrCPC cements revealed better in vivo performance in comparison to the control apatite cement. Additionally, the presence of both zinc and strontium resulted in the highest rate of new bone formation. These novel results indicate that the investigated ZnCPC and ZnSrCPC cements are both biocompatible and osteoconductive, being good candidate materials to use as bone substitutes.

In vitro performance assessment of new brushite-forming Zn- and ZnSr-substituted beta-TCP bone cements.

The present study investigated the in vitro performance of brushite-forming Zn- and ZnSr-substituted beta-TCP bone cements in terms of wet mechanical strength and biological response. Quantitative phase analysis and structural refinement of the powdered samples were performed by X-ray powder diffraction and Rietveld refinement technique. Initial and final setting times of the cement pastes, measured using Gilmore needles technique, showed that ZnSrCPC sets faster than ZnCPC. The measured values of the wet strength after 48 h of immersion in PBS solution at 37 degrees C showed that ZnSrCPC cements are stronger than ZnCPC cements. Human osteosarcoma-derived MG63 cell line proved the nontoxicity of the cement powders, using the resazurin metabolic assay.

Alphabeta hinders nuclear targeting of AICD and Fe65 in primary neuronal cultures.

The intracellular domain of the Alzheimer's amyloid precursor protein (AICD) has been described as an important player in the transactivation of specific genes. It results from proteolytic processing of the Alzheimer's amyloid precursor protein (APP), as does the neurotoxic Abeta peptide. Although normally produced in cells, Abeta is typically considered to be a neurotoxic peptide, causing devastating effects. By exposing primary neuronal cultures to relatively low Abeta concentrations, this peptide was shown to affect APP processing. Our findings indicate that APP C-terminal fragments are increased with concomitant reduction in the expression levels of APP itself. AICD nuclear immunoreactivity detected under control conditions was dramatically reduced in response to Abeta exposure. Additionally, intracellular protein levels of Fe65 and GSK3 were also decreased in response to Abeta. APP nuclear signaling is altered by Abeta, affecting not only AICD production but also its nuclear translocation and complex formation with Fe65. In effect, Abeta can trigger a physiological negative feedback mechanism that modulates its own production.