Blends of amphiphilic poly(dimethylsiloxane) and nonamphiphilic octaisobutyl-POSS at the air/water interface.

Brewster angle microscopy (BAM) shows that a nonamphiphilic polyhedral oligomeric silsesquioxane (POSS) nanofiller, octaisobutyl-POSS, forms aggregates at all surface concentrations at the air/water interface. When amphiphilic poly(dimethylsiloxane) (PDMS) is blended with the octaisobutyl-POSS (>10 wt % PDMS), the degree of POSS aggregation dramatically decreases. Thermodynamic analyses and morphology studies through surface pressure-area per monomer isotherm data and BAM, respectively, exhibit three distinct composition regimes: (1) Blends with >70 wt % POSS have unstable isotherms whose shapes deviate from those of PDMS and form large rigid domains comparable to but smaller than pure, octaisobutyl-POSS films. (2) At compositions between approximately 40 and 70 wt % POSS, the isotherms' features are qualitatively similar to those of pure PDMS, and extensive nanofiller "networks" are observed by BAM. (3) For compositions < or = approximately 30 wt % POSS, the isotherms are essentially those of pure PDMS with small POSS domains dispersed in the PDMS matrix. These results provide further insight into nanofiller aggregation mechanisms and dispersion that may be present in thicker films and bulk systems.

Phase behavior and viscoelastic properties of trisilanolcyclohexyl-POSS at the air/water interface.

A trisilanol polyhedral oligomeric silsesquioxane (POSS), trisilanolcyclohexyl-POSS (TCyP), has recently been reported to undergo a series of phase transitions from traditional Langmuir monolayers to unique rodlike hydrophobic aggregates in multilayer films that are different from "collapsed" morphologies seen in other systems at the air/water interface. This paper focuses on the phase transitions and morphology of films varying in average thickness from monolayers to trilayers and the corresponding viscoelastic properties of trisilanolcyclohexyl-POSS molecules at the air/water interface by means of surface pressure-area per molecule (Pi-A) isotherms, Brewster angle microscopy (BAM), and interfacial stress rheometry (ISR) measurements. The morphology studies by BAM reveal that the TCyP monolayer can collapse into different 3D structures by homogeneous or heterogeneous nucleation mechanisms. For homogeneous nucleation, analysis by Vollhardt et al.'s nucleation and growth model reveals that TCyP collapse is consistent with instantaneous nucleation with hemispherical edge growth at Pi = 3.7 mN.m(-1). Both surface storage (Gs') and loss (Gs") moduli obtained by ISR reveal three different non-Newtonian flow regimes that correlate with phase transitions in the Pi-A isotherms: (A) A viscous liquidlike "monolayer"; (B) a "biphasic regime"between a liquidlike viscous monolayer and a more rigid trilayer; and (C) an elastic solidlike "trilayer". These observations provide interesting insights into collapse mechanisms and structures in Langmuir films.

Blends of amphiphilic trisilanolisobutyl-POSS and phosphine oxide substituted poly(dimethylsiloxane) at the air/water interface.

Mixtures of a polyhedral oligomeric silsesquioxane, trisilanolisobutyl-POSS, and a polar silicone, poly(dimethyl-co-methylvinyl-co-methyl, 2-diphenyl phosphine oxide ethyl) siloxane (PDMS-PO), spread as Langmuir monolayers at the air/water interface are used to examine the surface phase behavior and aggregation of trisilanolisobutyl-POSS as a function of silicone composition. Analyses of the surface pressure-area per monomer (Pi-A) isotherms in terms of the collapse pressures and excess Gibbs free energies of mixing indicate the monolayers form slightly negative deviation mixtures. Direct observations of surface morphology with Brewster angle microscopy in the collapsed regime reveal that the governing factor for aggregation is the collapse Pi of the component with a stronger affinity for water. In trisilanolisobutyl-POSS/PDMS-PO blends, POSS aggregates as discrete domains and does not coalesce into larger aggregates or networklike structures for <80 wt % POSS, a feature that is vastly different from a previous study of POSS blended with regular poly(dimethylsiloxane).

Polyhedral oligomeric silsesquioxane amphiphiles: isotherm and brewster angle microscopy studies of trisilanolisobutyl-POSS at the air/water interface.

A trisilanol derivative of polyhedral oligomeric silsesquioxanes (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. Moreover, the trisilanolisobutyl-POSS monolayer undergoes a nonequilibrium structural transition (collapse) around a surface pressure of Rho approximately 18 mN.m(-1). This paper explores the mono- and multilayer properties of POSS molecules at the air/water interface by the Wilhelmy plate technique and Brewster angle microscopy. Surface concentrations are controlled by four mechanisms: (1) compression at a constant rate, (2) stepwise compression followed by surface pressure relaxation to an "equilibrium" value, (3) successive additions of spreading solution followed by relaxation to a stable surface pressure value, and (4) hysteresis loops to test the reversibility of the structural transitions. Results show that both an increasing compression rate and a decreasing temperature lead to an increase in the surface pressure of the structural transition, which is consistent with the formation of solidlike multilayer domains during the collapse process. For the case of compression at a constant rate, small domains initially form and later aggregate to form large solid masses. Cessation of compression allows these large solid masses to relax into equilibrium ringlike structures with a lower surface pressure, Rho approximately 13 mN.m(-1). In contrast, if the film is expanded rapidly, these large solidlike domains relax into "spaghetti" like networks with a residual surface pressure that depends on the initial amount of the solidlike collapsed phase. Finally, successive addition and stepwise compression isotherm experiments lead to different and time-dependent morphologies. Understanding these surface properties of POSS molecules affords an excellent opportunity to design and study POSS/polymer blends for coating applications where POSS molecules with rigid inorganic cores, soft organic coronae, and dimensions comparable to polymeric monolayers can serve as perfectly monodisperse nanofillers.

Unique rodlike surface morphologies in trisilanolcyclohexyl polyhedral oligomeric silsesquioxane films.

A trisilanol derivative of polyhedral oligomeric silsesquioxane (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. This paper explores the mono- and multilayer properties of another POSS derivative, trisilanolcyclohexyl-POSS, with pi-A isotherm and Brewster angle microscopy measurements. Results show that with continuously increasing surface concentration via symmetrical compression, trisilanolcyclohexyl-POSS amphiphiles at the air/water interface undergo a series of phase transitions from traditional Langmuir monolayers (one-POSS-molecule thick) to unique rodlike hydrophobic aggregates in multilayer films (approximately eight-POSS-molecules thick) that are dramatically different from "collapsed" morphologies seen in other systems. Stable and hydrophobic rodlike structure formation on water is presumably due to trisilanolcyclohexyl-POSS' unique molecular structure and strong tendency to form intermolecular hydrogen bonds in the solid state. This result is consistent with existing POSS/polymer composite research, which shows that POSS molecules tend to aggregate and crystallize into lamellar nanocrystals.

Polyhedral oligomeric silsesquioxanes: a new class of amphiphiles at the air/water interface.

Insoluble films of trisilanolisobutyl-POSS and octaisobutyl-POSS at the air/water interface are investigated by means of surface pressure - area per molecule isotherm (Pi - A) and Brewster angle microscopy (BAM). Analysis of the experimental results shows the partial cage molecule, trisilanolisobutyl-POSS, is a surface-active molecule that self-assembles into uniform monolayer upon compression; but the fully condensed cage molecule, octaisobutyl-POSS, is nonamphiphilic.