A capillary electrophoretic system with an improved gas-phase chemiluminescence nitrogen detector.

A new, rugged nebulizer interface was designed to couple a capillary electrophoretic system to a gas-phase nitrogen chemiluminescence detector. By hydraulically decoupling the separation capillary from the nebulizer of the gas-phase nitrogen chemiluminescence detector, the interface-related loss of separation efficiency could be limited to a mere 10%. The ozone reaction chamber of the gas-phase nitrogen chemiluminescence detector has been redesigned leading to a threefold improvement in detection sensitivity over the old design. In combination with a field-amplified sample stacking procedure, the new system was used to detect 0.25 ppm concentrations of UV chromophore-free aminoglycosides.

Heptakis(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin: a single isomer, 14-sulfated beta-cyclodextrin for use as a chiral resolving agent in capillary electrophoresis.

The first single-isomer, 14-sulfated beta-cyclodextrin, the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin (HMdiSu) has been used to separate 24 pharmaceutical weak base enantiomers in pH 2.5 background electrolytes using capillary electrophoresis. For the weakly binding bases, the cationic effective mobilities decreased, approached zero, and then increased again. For the strongly binding bases, the cationic effective mobilities decreased, became anionic at very low concentrations of HMdiSu, passed an anionic mobility maximum, then decreased again as the HMdiSu concentration was increased. Viscosity corrections according to Walden's rule did not eliminate these unexpected effective mobility extrema. The mobility extrema were rationalized by extending the charged resolving agent migration model (CHARM model) to include ionic strength effects.

Improved preparative-scale. continuous, free-flow electrophoretic separation of the enantiomers of terbutaline utilizing equal-but-opposite enantiomer mobilities.

The factors that influence yield and product purity in the continuous, preparative-scale electrophoretic separation of the enantiomers of terbutaline when using the principle of equal-but-opposite effective mobilities were studied. The sodium salt of heptakis-6-sulfato-beta-cyclodextrin was used as the resolving agent, in acidic, isopropanol-containing background electrolytes, in the continuous, free-flow, preparative electrophoretic instrument, the Octopus. By matching the linear velocity of the feed solution to that of the background electrolyte, lateral hydrodynamic dispersion was minimized resulting in a nonelectrophoresed feed band that was only three fractions (about 3 mm) wide as it exited the 0.5 m long separation channel. The multiple of residence time and applied potential was also optimized, constrained by migration of the front of heptakis-6-sulfato-beta-cyclodextrin out of the separation zone, leading to the recovery of 95% of both enantiomers in better than 99.99% purity, at a production rate of 0.1 mg/h.

Artifact-free matrix-assisted laser desorption ionization time-of-flight mass spectra of tert.-butyldimethylsilyl ether derivatives of cyclodextrins used for the synthesis of single-isomer, chiral resolving agents for capillary electrophoresis.

Artifact-free, high-resolution matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectra have been obtained for the labile, single-isomer, tert.-butyldimethylsilyl ether derivatives of alpha-, beta- and gamma-cyclodextrins by optimizing the MALDI sample preparation method. 2,5-Dihydroxybenzoic acid, a 3:1 mixture of 2,5-dihydroxybenzoic acid and 1-hydroxyisoquinoline, and 2,4,6-trihydroxyacetophenone were investigated as MALDI matrices with methanol and acetonitrile as matrix solvents. Partial-to-complete loss of the tert.-butyldimethylsilyl groups was observed when the commonly used 2,5-dihydroxybenzoic acid was the MALDI matrix and/or methanol was the solvent, both with and without trifluoroacetic acid as additive. Loss of the labile tert.-butyldimethylsilyl groups was avoided with 2,4,6-trihydroxyacetophenone as MALDI matrix and acetonitrile as matrix solvent. Good ion intensities were achieved for the (M+Na)+ and (M+K)+ quasimolecular ions in the positive-ion mode. Minor byproducts were observed in some of the samples and the information was used to aid the optimization of the synthetic work.

Separation selectivity patterns in the capillary electrophoretic separation of anionic enantiomers by octakis-6-sulfato-gamma-cyclodextrin.

The capillary electrophoretic separation of anionic enantiomers with multiply-charged, single-isomer, anionic resolving agents was reexamined with the help of the charged resolving agent migration model. Three general model parameters were identified that influence the shape of the separation selectivity and enantiomer mobility difference curves: parameter b, the binding selectivity (K(RCD)/K(SCD)), parameter s, the size selectivity (micro0RCD/micro0SCD), and parameter a, the complexation-induced alteration of the analyte's mobility (micro0SCD/micro0). Function analysis of the model indicates that there are six unique separation selectivity vs. resolving agent concentration patterns: in two of the patterns, separation selectivity asymptotically increases to the limiting value set by parameter b; in two other patterns, separation selectivity passes a local maximum and asymptotically decreases to the limiting value set by parameter b; and in the last two patterns, separation selectivity passes a local maximum, decreases to unity, then, after reversal of the intrinsic migration order, asymptotically increases to the limiting value set by parameter b. Though the patterns with asymptotically increasing selectivities were observed in earlier work, this paper reports the first experimental verification of the existence of the local selectivity maximum during the capillary electrophoretic separation of the enantiomers of several weak acids in high pH background electrolytes with octakis-6-sulfato-gamma-cyclodextrin as the resolving agent.

Capillary electrophoretic separation of the enantiomers of organophosphates with a phosphorus stereogenic center using the sodium salt of octakis(2,3-diacetyl-6-sulfo)-gamma-cyclodextrin as resolving agent.

The sodium salt of the single-isomer, chiral resolving agent, octakis(2,3-diacetyl-6-sulfo)-gamma-cyclodextrin (ODAS-gammaCD) has been used for the capillary electrophoretic separation of the enantiomers of alkylarylphosphates which carry a phosphorus-based stereogenic center. The effective mobilities and separation selectivities were measured at different ODAS-gammaCD and methanol concentrations to find the conditions under which the minor enantiomers could be adequately quantitated in samples obtained by chemical resolution of the racemic mixtures. This work extends the utility of ODAS-gammaCD to a hitherto unexplored field, the capillary electrophoretic separation of the enantiomers of organophosphorus compounds.

Synthesis and analytical characterization of the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)cyclomaltoheptaose, a chiral resolving agent candidate for capillary electrophoresis.

A pure, single isomer, strong electrolyte chiral resolving agent candidate for capillary electrophoresis, the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)cyclomaltoheptaose has been synthesized on the 100-g scale, in greater than 97% purity, through heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltohep taose and heptakis(2-O-methyl)cyclomaltoheptaose intermediates. The structural identity of each intermediate and the final product was conclusively established by high-resolution MALDI-TOF mass spectrometry, variable-temperature 1H and 13C NMR spectroscopy and X-ray crystallography. The purity of each intermediate and the final product was determined by gradient high-performance liquid chromatography (HPLC) and indirect UV detection capillary electrophoresis.

Enantiomer separations by nonaqueous capillary electrophoresis using octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin.

The newest member of the single-isomer isomer sulfated cyclodextrin family, octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma-CD) was used for the first time as a resolving agent for the nonaqueous capillary electrophoretic separation of the enantiomers of 26 weak base pharmaceuticals in an acidic methanol background electrolyte. The solubility limit of ODAS-gamma-CD at room temperature proved to be 55 mM in this background electrolyte, which afforded good, fast enantiomer separations for most of the basic drugs tested. For all the bases studied, the effective mobilities and separation selectivities were found to follow the predictions of the charged resolving agent migration model of electrophoretic enantiomer separations. The effective mobilities of the weakly binding weak bases remained cationic throughout the entire 0 to 45 mM ODAS-gamma-CD concentration range; separation selectivities increased as the ODAS-gamma-CD concentration was increased. The effective mobilities of the moderately binding weak bases became anionic in the 2.5 to 45 mM ODAS-gamma-CD concentration range; separation selectivities first increased as the effective mobilities approached zero, then decreased again as the ODAS-gamma-CD concentration was increased further. The effective mobilities of the strongly binding weak bases became anionic in the 0 to 2.5 mM ODAS-gamma-CD concentration range; separation selectivities decreased as the ODAS-gamma-CD concentration was increased above 2.5 mM.

Crystal structures of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose and heptakis(2-O-methyl)cyclomaltoheptaose.

Crystal structures of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose, heptakis(2-O-methyl-3,6-di-O-tert-butyldimethylsilyl)cyclomaltohep taose and heptakis(2-O-methyl)cyclomaltoheptaose were determined from X-ray diffraction patterns obtained for single crystals of the title compounds grown from ethyl acetate and ethanol, respectively, as solvent. The crystal structures prove conclusively that quantitative migration of the tert-butyldimethylsilyl group from the 2-O- to the 3-O-position [D. Icheln, B. Gehrcke, Y. Piprek, P. Mischnick, W.A. Konig, M.A. Dessoy, A.F. Morel, Carbohydr. Res., 280 (1996) 237-250] was achieved during methylation of heptakis(2,6-di-O-tert-butyldimethylsilyl)cyclomaltoheptaose by iodomethane-sodium hydride.

Causes of death of patients with multiple injuries in Debrecen, Hungary.

OBJECTIVE: To find out the main causes of death of people who had multiple severe injuries. DESIGN: Retrospective study. SETTING: Teaching hospital, Hungary. SUBJECTS: 86 people with severe multiple injuries, of whom 59 died and had necropsies. MAIN OUTCOME MEASURE: Establishment of a database. RESULTS: Consumption of alcohol was a common precursor. Head and chest injuries predominated. More pedestrians than people in vehicles were killed, and there were 8 suicides and 3 murders. There were no gunshot injuries. CONCLUSIONS: Reduction of deaths from multiple injuries is as much a socioeconomic as a medical matter.

Experimental verification of a predicted, previously unseen separation selectivity pattern in the capillary electrophoretic separation of noncharged enantiomers by octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin.

The capillary electrophoretic separation of noncharged enantiomers with single-isomer anionic resolving agents is reexamined here with the help of the charged resolving agent migration model. Two general model parameters have been identified that influence the effective mobility, separation selectivity and mobility difference curves of the enantiomers: parameter b, called binding selectivity (K(RCD)/K(SCD)), and parameter s, called size selectivity (mu(o)RCD/mu(o)SCD). Analysis of the model in terms of these parameters indicates that in addition to the known, previously observed separation selectivity vs. resolving agent concentration patterns, a new pattern, increasing separation selectivity with increasing resolving agent concentration, is also possible provided that (i) K(RCD)/K(SCD)<1 and mu(o)RCD/mu(o)SCD>1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)>1, or (ii) K(RCD)/ K(SCD)>1 and mu(o)SCD/mu(o)SCD<1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)<1. This hitherto unseen separation selectivity pattern was experimentally verified during the capillary electrophoretic separation of the enantiomers of O-isopropyl p-nitrophenyl methylphosphonate with the single-isomer octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin as resolving agent.

Use of single-isomer, multiply charge chiral resolving agents for the continuous, preparative-scale electrophoretic separation of enantiomers based on the principle of equal-but-opposite analyte mobilities.

A novel approach to continuous, preparative-scale electrophoretic enantiomer separations has been developed based on the observation that stable, equal-but-opposite effective mobilities can be created for the enantiomers of a single-charged analyte by complexing them with a single-isomer, multiply charged resolving agent, provided that the charge of the resolving agent is opposite in sign to that of the uncomplexed analyte enantiomers. When such an analyte-resolving agent system is fed into a continuous, free-flow electrophoretic apparatus, stable, steady-state operating conditions can be established which permit the continuous feeding of the racemic analyte and the collection of pure enantiomers at the opposite sides of the feed stream. This concept is demonstrated via the separation of the enantiomers of terbutaline using heptakis-6-sulfato beta-cyclodextrin as resolving agent, affording production rates as high as 2.8 mg/h in the general-purpose, continuous free-flow electrophoretic system, the Octopus.

Experimental verification of a predicted, hitherto unseen separation selectivity pattern in the nonaqueous capillary electrophoretic separation of weak base enantiomers by octakis (2,3-diacetyl-6-sulfato)-gamma-cyclodextrin.

The capillary electrophoretic separation of cationic enantiomers with single-isomer multivalent anionic resolving agents was reexamined with the help of the charged resolving agent migration model. Three general model parameters were identified that influence the shape of the separation selectivity and enantiomer mobility difference curves: parameter b, the binding selectivity (K(RCD)/K(SCD)), parameter s, the size selectivity (mu0(RCD)/mu0(SCD)), and parameter a, the complexation-induced alteration of the analyte's mobility (mu0(RCD)/mu0). In addition to the previously observed discontinuity in separation selectivity that occurs as mu(eff) of the less mobile enantiomer changes from cationic to anionic, a new feature, a separation selectivity maximum was predicted to occur in the resolving agent concentration range where both enantiomers migrate cationically provided that (i) K(RCD)/K(SCD) <1 and mu0(RCD)/mu0(SCD) >1 and (K(RCD)mu0(RCD))/(K(SCD)mu0(SCD)) > 1, or (ii) K(RCD)/K(SCD) >1 and mu0(RCD)/mu0(SCD) <1 and (K(RCD)mu0(RCD))/(K(SCD)mu0(SCD)) <1. This hitherto unseen separation selectivity pattern was experimentally verified during the nonaqueous capillary electrophoretic separation of the enantiomers of four weak base analytes in acidic methanol background electrolytes with octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gammaCD) as resolving agent.

Atom-Resolved EC-STM Studies of Anion Adsorption at Well-Defined Surfaces: Pd(111) in Sulfuric Acid Solution.

The interfacial structure of well-defined Pd(111) single-crystal electrodes in 0.05 M H(2)SO(4) has been studied by electrochemical scanning tunneling microscopy (EC-STM) at potentials within the electrical double-layer region. Experiments with (virtually) atomically sharp STM tips yielded images of such quality that the intermolecular and intramolecular structures of the highly ordered compact layer could actually be resolved on an atomic scale. Fundamental concepts in inorganic chemistry have been invoked to postulate that SO(4)(2-), H(3)O(+), and H(2)O are the most likely constituents of the compact layer. A structural model of such a compact layer is presented. Copyright 2000 Academic Press.

Reversal of charge selectivity in transmembrane protein pores by using noncovalent molecular adapters.

In this study, the charge selectivity of staphylococcal alpha-hemolysin (alphaHL), a bacterial pore-forming toxin, is manipulated by using cyclodextrins as noncovalent molecular adapters. Anion-selective versions of alphaHL, including the wild-type pore and various mutants, become more anion selective when beta-cyclodextrin (betaCD) is lodged within the channel lumen. By contrast, the negatively charged adapter, hepta-6-sulfato-beta-cyclodextrin (s(7)betaCD), produces cation selectivity. The cyclodextrin adapters have similar effects when placed in cation-selective mutant alphaHL pores. Most probably, hydrated Cl(-) ions partition into the central cavity of betaCD more readily than K(+) ions, whereas s(7)betaCD introduces a charged ring near the midpoint of the channel lumen and confers cation selectivity through electrostatic interactions. The molecular adapters generate permeability ratios (P(K+)/P(Cl-)) over a 200-fold range and should be useful in the de novo design of membrane channels both for basic studies of ion permeation and for applications in biotechnology.

Preparative-scale isoelectric focusing separation of enantiomers using a multicompartment electrolyzer with isoelectric membranes.

The IsoPrime multicompartment electrolyzer, equipped with a series of isoelectric membranes with closely spaced pI values, was used for the first time for the preparative-scale separation of the enantiomers of dansyl phenylalanine with hydroxypropyl beta-cyclodextrin as resolving agent. The final separation conditions could be established easily in three successive experiments by rationally narrowing the pH steps between the neighboring isoelectric membranes. The final separation yielded products with an enantiomeric excess greater than 99.9%, at production rates of about 0.1 mg/h. The greatest experimental difficulty was caused by the relatively high salt content of the hydroxypropyl beta-cyclodextrin used, which resulted in high conductivity and limited the maximum field strength one could use.

A family of single-isomer, sulfated gamma-cyclodextrin chiral resolving agents for capillary electrophoresis. 1. Octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin.

The first member of the single-isomer, sulfated gamma-cyclodextrin family, the sodium salt of octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma CD) has been synthesized, analytically characterized, and used to separate, by capillary electrophoresis, a variety of neutral, acidic, basic, and amphoteric enantiomers in low pH background electrolytes. The anionic effective mobilities of the neutral and anionic analytes were found to increase with the concentration of ODAS-gamma CD. For weakly binding cationic analytes, the effective mobilities went from cationic high values, through zero, to increasingly larger anionic values as the concentration of ODAS-gamma CD was increased. For the strongly complexing cationic analytes, the effective mobilities became anionic even at very low ODAS-gamma CD concentrations and became smaller as the ionic strength of the background electrolyte increased with the increasing ODAS-gamma CD concentration. Separation selectivity followed the predictions of the charged resolving agent migration model: for neutral analytes it decreased as the concentration of ODAS-gamma CD was increased. For cationic analytes, selectivities were found to increase as the cationic effective mobilities approached zero, then decreased as the concentration of ODAS-gamma CD was increased further. The extent of peak resolution that could be realized with ODAS-gamma CD strongly depended on the magnitude of separation selectivity and the normalized electroosmotic flow mobility. ODAS-gamma CD proved to be a broadly applicable chiral resolving agent.

Nonaqueous capillary electrophoretic separation of basic enantiomers using heptakis(2,3-dimethyl-6-sulfato)-beta-cyclodextrin.

The enantiomers of 40 basic analytes, mostly pharmaceuticals, were separated by nonaqueous capillary electrophoresis in acidic methanol background electrolytes using the sodium salt of heptakis(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-beta-CD). The effective mobilities, separation selectivities, and peak resolution values were determined as a function of the HDMS-beta-CD concentration in the 0-40 mM range and were found to follow the theoretical predictions of the charged resolving agent migration model (CHARM model). Fast, efficient enantiomer separations were achieved for a large number of both very hydrophobic and hydrophilic weak bases.

Analytical- and preparative-scale isoelectric focusing separation of enantiomers.

Isoelectric focusing has been used to achieve the analytical- and preparative-scale separation of the enantiomers of amphoteric analytes. By considering the simultaneous multiple equilibria involved in the chiral recognition process, a model has been developed to describe the magnitude of the ΔpI value that develops between the enantiomers in the presence of a noncharged chiral resolving agent, such as a noncharged cyclodextrin. Theoretical analysis of the model indicates that three kinds of IEF enantiomer separations are possible: aniono-selective and cationo-selective, when only the identically charged forms of the enantiomers bind selectively to the resolving agent, and duo-selective, when the differently charged forms of the enantiomers bind selectively to the resolving agent. The model predicts that the ΔpI vs cyclodextrin concentration curves approach limiting ΔpI values which can be as large as 0.1, even when the binding constants of the enantiomers differ only by 10%. The parameters of the model can be readily determined by free solution capillary electrophoretic or pressure-mediated capillary electrophoretic experiments. The validity of the proposed model has been tested with hydroxypropyl ß-cyclodextrin as resolving agent and dansyl phenylalanine as probe. Capillary IEF enantiomer separations have been achieved using both ampholytes and binary propionic acid-serine buffers (Bier's buffers). Preparative-scale IEF enantiomer separations with production rates as high as 1.3 mg/h have been achieved in an Octopus continuous free-flow electrophoretic system.

A simple method for the determination of isoelectric points of ampholytes with closely spaced pKa values using pressure-mediated capillary electrophoresis.

A simple method, based on a modified version of pressure-mediated capillary electrophoresis (PreMCE) has been developed for the determination of the isoelectric points of ampholytes which have closely spaced pKa values. This new pI-determination PreMCE method (i) can be easily executed on most commercial capillary electrophoresis instruments; (ii) it can use small, impure samples, (iii) unlike isoelectric focusing methods in natural pH gradients, it does not require a linear pH gradient, and (iv) it eliminates the pI errors that are due to chromatographic retention on the walls of the separation chamber.