Efficacy of pulsed-xenon ultraviolet light on reduction of Mycobacterium fortuitum.

OBJECTIVES: Hospitals and healthcare facilities rely largely on isolation and environmental disinfection to prevent transmission of pathogens. The use of no-touch technology is an accepted practice for environmental decontamination in medical care facilities, but little has been published about the effect of ultraviolet light generated by a portable pulsed-xenon device use on Mycobacteria. We used Mycobacterium fortuitum which is more resistant to ultraviolet radiation and less virulent than Mycobacterium tuberculosis, to determine the effectiveness of portable pulsed-xenon devices on Mycobacterium in a laboratory environment. METHODS: To determine the effectiveness of pulsed-xenon devices, we measured the bactericidal effect of pulsed-xenon devices on Mycobacterium fortuitum. RESULTS: In five separate experiments irradiating an average of 106 organisms, the mean (standard deviation) log-kill at 5 min was 3.98 (0.60), at 10 min was 4.96 (0.42), and at 15 min was 5.64 (0.52). CONCLUSIONS: Our results demonstrate that using pulsed-xenon devices is a highly effective modality to reduce microbial counts with this relatively ultraviolet germicidal irradiation-resistant mycobacterium in a time-dependent manner.

Use of Ultraviolet Irradiation in Addition to Commonly Used Hospital Disinfectants or Cleaners Further Reduces the Bioburden on High-Touch Surfaces.

BACKGROUND: The reduction in microbial bioburden achieved by terminal disinfection in a hospital may vary considerably by type of disinfectant or cleaner and by environmental service (EVS) personnel. This study estimated whether supplemental ultraviolet (UV) irradiation after disinfection or cleaning reduced bioburden and whether the supplemental effect persisted after adjusting for disinfectant or cleaner type and EVS personnel. METHODS: Environmental samples for aerobic bacterial colonies (ABC) and methicillin-resistant Staphylococcus aureus (MRSA) were obtained from 5 high-touch surfaces in patient rooms at 3 time points: before manual cleaning, after manual cleaning using 1 of 3 disinfectants or 1 cleaner, and after UV irradiation. RESULTS: For ABC, the model-estimated mean (95% uncertainty interval) counts were 56% (48%-63%) lower for postmanual + UV compared with manual clean alone, and for MRSA they were 93% (62%-99%) lower for postmanual + UV vs manual clean alone. CONCLUSIONS: Although UV supplementation provides incremental benefit in bioburden reduction across all cleaners or disinfectants tested, it provides the greatest benefit when supplementing cleaners or disinfectants with the lowest disinfection properties. UV irradiation provides additional bioburden reduction to manual cleaning or disinfection, even when accounting for variability introduced by different disinfectants and EVS personnel.

Interaction of healthcare worker hands and portable medical equipment: a sequence analysis to show potential transmission opportunities.

BACKGROUND: While research has demonstrated the importance of a clean health care environment, there is a lack of research on the role portable medical equipment (PME) play in the transmission cycle of healthcare-acquired infections (HAIs). This study investigated the patterns and sequence of contact events among health care workers, patients, surfaces, and medical equipment in a hospital environment. METHODS: Research staff observed patient care events over six different 24 h periods on six different hospital units. Each encounter was recorded as a sequence of events and analyzed using sequence analysis and visually represented by network plots. In addition, a point prevalence microbial sample was taken from the computer on wheels (COW). RESULTS: The most touched items during patient care was the individual patient (850), bedrail (375), bed-surface (302), and bed side Table (223). Three of the top ten most common subsequences included touching PME and the patient: computer on wheels ➔ patient (62 of 274 total sequences, 22.6%, contained this sequence), patient ➔ COW (20.4%), and patient ➔ IV pump (16.1%). The network plots revealed large interconnectedness among objects in the room, the patient, PME, and the healthcare worker. CONCLUSIONS: Our results demonstrated that PME such as COW and IV pump were two of the most highly-touched items during patient care. Even with proper hand sanitization and personal protective equipment, this sequence analysis reveals the potential for contamination from the patient and environment, to a vector such as portable medical equipment, and ultimately to another patient in the hospital.

Self-sanitizing copper-impregnated surfaces for bioburden reduction in patient rooms.

Novel self-sanitizing copper oxide-impregnated solid surfaces have the potential to influence bioburden levels, potentially lowering the risk of transmission of pathogens in patient care environments. Our study showed persistently lower microbial burden over a 30-hour sampling period on a copper-impregnated tray table compared with a standard noncopper surface in occupied patient rooms after thorough initial disinfection.

Developing a Checklist: Consensus Via a Modified Delphi Technique.

OBJECTIVE: To create a universal checklist of key preparatory steps to aid anesthesiologists in patient separation from cardiopulmonary bypass. DESIGN: Multistep, iterative survey with statistically guided refinement of survey items using a modified Delphi technique. SETTING: Internet-based surveys. PARTICIPANTS: Ninety active members of the Society of Cardiovascular Anesthesiologists volunteered to participate, including geographically distributed private practice and academic physicians. INTERVENTIONS: A series of checklist items was created and distributed to 90 anesthesiologists, who assessed each item's importance in preparing for patient separation from cardiopulmonary bypass and added, deleted, or modified any items as they saw fit. Items meeting a threshold of greater than 90% group acceptance were carried forward to a second survey. These items then were evaluated using a 5-point Likert scale to grade relative importance and then compared with the group's responses, creating a third survey with refined checklist items. The results then were used to generate a final survey based on each item achieving certain predefined statistical criteria, which then were scored again by the participants, generating a final checklist via statistically guided consensus. MEASUREMENTS AND MAIN RESULTS: An initial checklist containing 28 possible items was proposed to the participants. After the iterative process was completed, a final checklist of 10 items deemed essential to prepare for bypass separation was created. CONCLUSIONS: A checklist to aid in bypass separation was created with key steps derived from a statistically driven Delphi process. This technique of iterative consensus building may be useful in developing additional safety checklists.

Evaluation of a pulsed xenon ultraviolet light device for isolation room disinfection in a United Kingdom hospital.

BACKGROUND: Pathogen transmission from contaminated surfaces can cause hospital-associated infections. Although pulsed xenon ultraviolet (PX-UV) light devices have been shown to decrease hospital room bioburden in the United States, their effectiveness in United Kingdom (UK) hospitals is less understood. METHODS: Forty isolation rooms at the Queens Hospital (700 beds) in North London, UK, were sampled for aerobic bacteria after patient discharge, after manual cleaning with a hypochlorous acid-troclosene sodium solution, and after PX-UV disinfection. PX-UV device efficacy on known organisms was tested by exposing inoculated agar plates in a nonpatient care area. Turnaround times for device usage were recorded, and a survey of hospital staff for perceptions of the device was undertaken. RESULTS: After PX-UV disinfection, the bacterial contamination measured in colony forming units (CFU) decreased by 78.4%, a 91% reduction from initial bioburden levels prior to terminal cleaning. PX-UV exposure resulted in a 5-log CFU reduction for multidrug-resistant organisms (MDROs) on spiked plates. The average device turnaround time was 1 hour, with minimal impact on patient throughput. Ward staff were enthusiastic about device deployment, and device operators reported physical comfort in usage. CONCLUSIONS: PX-UV use decreased bioburden in patient discharge rooms and on agar plates spiked with MDROs. The implementation of the PX-UV device was well received by hospital cleaning and ward staff, with minimal disruption to patient flow.

Comparison of Environmental MRSA Levels on High-Touch Surfaces in Contact Isolation and Noncontact Isolation Patient Rooms.

Environmental samples were collected from 100 hospital rooms, 32 noncontact rooms, and 68 contact isolation rooms. We isolated 202 and 1,830 MRSA colonies in noncontact and contact isolation rooms, respectively. The study identified MRSA isolates in hospital rooms of patients without colonization or infection with MRSA. Infect. Control Hosp. Epidemiol. 2015;36(12):1472-1475.

Origin of methicillin-resistant Staphylococcus aureus health care-associated infections: evaluation of the role of anterior nares.

Methicillin-resistant Staphylococcus aureus (MRSA) health care-associated infections (HAIs) are a cause of extended hospitalizations and escalating health care costs. We typed 49 MRSA HAIs and their corresponding admission nasal MRSA isolates to determine strain-relatedness and better define the role of anterior nares in the causation of HAI and the value of decolonization. Based on repetitive extragenic palindromic sequencing polymerase chain reaction results, the majority of our patients possibly acquired MRSA HAI from nonnasal sources (36 out of 49; 74%). Among the remaining patients (13 out of 49; 26%) the nasal and clinical HAI isolates matched, indicating potential benefit of decolonization among this subsegment of patients. These findings may be relevant to institutions such as Veterans Health Administration hospitals that already have universal screening programs but are looking at ways to further reduce MRSA HAI incidence.

Is the pulsed xenon ultraviolet light no-touch disinfection system effective on methicillin-resistant Staphylococcus aureus in the absence of manual cleaning?

BACKGROUND: Methicillin-resistant Staphylococcus aureus (MRSA) has been shown to survive on ambient surfaces for extended periods of time. Leftover MRSA environmental contamination in a hospital room places future patients at risk. Manual disinfection supplemented by pulsed xenon ultraviolet (PX-UV) light disinfection has been shown to greatly decrease the MRSA bioburden in hospital rooms. However, the effect of PX-UV in the absence of manual disinfection has not been evaluated. METHODS: Rooms that were previously occupied by a MRSA-positive patient (current colonization or infection) were selected for the study immediately postdischarge. Five high-touch surfaces were sampled, before and after PX-UV disinfection, in each hospital room. The effectiveness of the PX-UV device on the concentration of MRSA was assessed employing a Wilcoxon signed-rank test for all 70 samples with MRSA in 14 rooms, as well as by surface location. RESULTS: The final analysis included 14 rooms. Before PX-UV disinfection there were a total of 393 MRSA colonies isolated from the 5 high-touch surfaces. There were 100 MRSA colonies after disinfection by the PX-UV device and the overall reduction was statistically significant (P < .01). CONCLUSIONS: Our study results suggest that PX-UV light effectively reduces MRSA colony counts in the absence of manual disinfection. These findings are important for hospital and environmental services supervisors who plan to adapt new technologies as an adjunct to routine manual disinfection.

Disinfecting personal protective equipment with pulsed xenon ultraviolet as a risk mitigation strategy for health care workers.

The doffing of personal protective equipment (PPE) after contamination with pathogens such as Ebola poses a risk to health care workers. Pulsed xenon ultraviolet (PX-UV) disinfection has been used to disinfect surfaces in hospital settings. This study examined the impact of PX-UV disinfection on an Ebola surrogate virus on glass carriers and PPE material to examine the potential benefits of using PX-UV to decontaminate PPE while worn, thereby reducing the pathogen load prior to doffing. Ultraviolet (UV) safety and coverage tests were also conducted. PX-UV exposure resulted in a significant reduction in viral load on glass carriers and PPE materials. Occupational Safety and Health Administration-defined UV exposure limits were not exceeded during PPE disinfection. Predoffing disinfection with PX-UV has potential as an additive measure to the doffing practice guidelines. The PX-UV disinfection should not be considered sterilization; all PPE should still be considered contaminated and doffed and disposed of according to established protocols.

Can pulsed xenon ultraviolet light systems disinfect aerobic bacteria in the absence of manual disinfection?

Whereas pulsed xenon-based ultraviolet light no-touch disinfection systems are being increasingly used for room disinfection after patient discharge with manual cleaning, their effectiveness in the absence of manual disinfection has not been previously evaluated. Our study indicates that pulsed xenon-based ultraviolet light systems effectively reduce aerobic bacteria in the absence of manual disinfection. These data are important for hospitals planning to adopt this technology as adjunct to routine manual disinfection.

Checklist usage decreases critical task omissions when training residents to separate from simulated cardiopulmonary bypass.

OBJECTIVE: Separation from cardiopulmonary bypass (CPB) requires multiple preparatory steps, during which mistakes, omissions, and human errors may occur. Checklists have been used extensively in aviation to improve performance of complex, multistep tasks. The aim of this study was to (1) develop a checklist using a modified Delphi process to identify essential steps necessary to prepare for separation from CPB, and (2) compare the frequency of completed items with and without the use of a checklist in simulation. It was hypothesized that the use of a checklist would reduce the number of omissions. DESIGN: High-fidelity simulation study. SETTING: University-affiliated tertiary care facility. PARTICIPANTS: Seven cardiac anesthesiologists created a checklist using a modified Delphi process. Ten residents participated in 4 scenarios separating from CPB in simulation. INTERVENTIONS: Each scenario was performed first without a checklist and then again with a checklist. An observer graded participants' performance. MEASUREMENTS AND MAIN RESULTS: A pre-separation checklist containing 9 tasks was created using the Delphi process. Without using this checklist, 4 tasks were completed in at least 75% of scenarios, and 8 tasks were completed at least 75% of the time when using the checklist. There was a significant improvement in completion of 5 of the 9 items (p< 0.01). CONCLUSIONS: A modified Delphi process can be used to create a checklist of steps in preparing to separate from CPB. Using this checklist during simulation resulted in increased frequency of completing designated tasks in comparison to relying on memory alone. Checklists may reduce omission errors during complex periods of anesthesiologists' perioperative workflow.

Accuracy of noninvasive estimated continuous cardiac output (esCCO) compared to thermodilution cardiac output: a pilot study in cardiac patients.

OBJECTIVE: To compare the noninvasive estimated continuous cardiac output (esCCO), device-derived cardiac output (CO) to simultaneous pulmonary artery catheter (PAC) thermodilution (TD) CO. DESIGN: A prospective study comparing pulse wave transit time (estimated continuous cardiac output, esCCO; Nihon Kohden, Tokyo, Japan) to intermittent TD CO. SETTING: One academic hospital. PARTICIPANTS: Patients presenting for cardiac surgery. INTERVENTIONS: Intraoperative CO measurements at 4 distinct time points (after induction, after sternotomy, after cardiopulmonary bypass, and after chest closure). MEASUREMENTS AND MAIN RESULTS: The study population consisted of American Society of Anesthesiologists (ASA) IV subjects, 27 (77%) males and 8 (23%) females, with a mean age of 64.6 ± 12.2 years. Data points from esCCO and TD were collected simultaneously and means per time point compared using Bland-Altman, Pearson R coefficient, and percent error. Mean TD CO for the study was 5.4 L/min. The Pearson R coefficient, percent error, and bias in L/min were: 0.57, 44%, 0.66 (after induction); 0.54, 51%, 0.88 (after sternotomy); 0.60, 60%, 0.95 (after cardiopulmonary bypass); and 0.57, 60%, 0.75 (after chest closure) respectively. CONCLUSIONS: esCCO is easy to use and provides continuous CO measurements, but has wide limits of agreement and large percentage errors with a consistently positive bias in comparison to TD.

Evaluating the status of "translating research into practice" at a major academic healthcare system.

OBJECTIVES: The aim of this study was to assess the status of translating research findings into practice at a major academic healthcare system in Central Texas. METHODS: We conducted a cross-sectional survey addressing knowledge of and participation in translational research of physicians, residents, nurses and third- and fourth-year medical students in a major academic healthcare system in Central Texas. RESULTS: Out of 508 respondents, 428 (84.3 percent) completed all questions. A total of 68.9 percent of faculty reported having sufficient education and training to conduct research versus 44.4 percent of residents and 35.6 percent of nurses. Fifty-eight percent of faculty, 53 percent of residents and 9 percent of nurses reported current involvement in research activity. A total of 55.6 percent of residents reported that their departments provide them with protected time for research versus 18.4 percent of faculty and 10.3 percent of nurses. In addition, 33.9 percent of nurses reported interest in participating in research but do not know how to start. There were 86.4 percent of faculty, 77.8 percent of residents, and 58 percent of nurses who indicated they were familiar with translational research. However, only 42.7 percent of faculty, 46.7 percent of residents and 35.6 percent of nurses indicated they were aware of any changes in the delivery of care that resulted from research projects. CONCLUSIONS: The study results suggested failure to leverage members of the healthcare team in a systematic process to ensure translation of research findings into practice. Results highlighted the need to merge culture of safety and quality improvement with research while dealing with the daily pressures of patient care.

Using simulation to orient code blue teams to a new hospital facility.

OBJECTIVES: Prompt and successful cardiopulmonary resuscitation during a sudden cardiac arrest can be hindered by multiple variables, ie, ineffective communication, stress, lack of training, and an unfamiliar environment, such as a new hospital facility. The main objective of the study was to use high-fidelity simulations to orient Code Blue Teams (CBTs) to critical events in a new hospital facility. A secondary objective was to elucidate factors that may have contributed to responses by debriefing teams. METHODS: Mock Code Blue exercises using high-fidelity simulation were implemented in real workplace settings to orient CBTs to critical events. We measured arrival time of first responder, crash cart to code site, first six CBT responders, first chest compression, and first electrical shock. After each mock code, participants were debriefed to assess any barriers to effective response and decision making. RESULTS: Twelve mock codes were conducted at different locations of the new facility. Sixty-nine percent of the participants reported that the training was beneficial. The median time of arrival of the first responders was 42 seconds and the first CBT member was 66 seconds. The median time to initiation of chest compressions was 80 seconds, crash cart arrival was 68 seconds, and first electrical shock was 341 seconds. An additional outcome of the study was the identification of facility and systems issues that had the potential to impact patient safety. CONCLUSIONS: Clinical simulation can be effectively used to orient CBTs and identify critical safety issues in a newly constructed healthcare facility.