Catalytic, Spectroscopic, and Theoretical Studies of Fe4S4-Based Coordination Polymers as Heterogenous Coupled Proton-Electron Transfer Mediators for Electrocatalysis.

Iron-sulfur clusters play essential roles in biological systems, and thus synthetic [Fe4S4] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe4S4] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO2 reduction catalyst. Here, we demonstrate that incorporating these [Fe4S4] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe4S4-based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn-H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe4S4] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

Mechanism of Benzene Hydroxylation on Tri-Iron Oxo-Centered Cluster-Based Metal-Organic Frameworks.

High-valent Fe(IV)-oxo species derived upon reactions of N2O with Fe(II) centers-embedded in the framework of tri-iron oxo-centered-based metal-organic frameworks (MOFs)- selectively affect the conversion of benzene-to-phenol via electrophilic addition to arene C-H bonds akin to oxygen transfer mechanisms in the P450 enzyme. The Fe(II) species identified by Mössbauer spectroscopy can be titrated in situ by the addition of NO to completely suppress benzene oxidation, verifying the relevance of Fe(II) centers. Observed inverse kinetic isotope effects in benzene hydroxylation preclude the involvement of H atom transfer steps from benzene to the Fe(IV)-oxo species and instead suggest that the electrophilic iron-oxo group adds to an sp2 carbon of benzene, resulting in a change in the hybridization from sp2-to-sp3. These mechanistic postulates are affirmed in Kohn-Sham density functional calculations, which predict lower barriers for additive mechanisms for arene oxidation than H atom abstraction steps. The calculations show that the reaction proceeds on the pentadectet spin surface and that a non-innocent ligand participates in the transfer of the H atom. Following precedent literature which demonstrates that these Fe(IV)-oxo species react with C-H bonds in alkanes via hydrogen atom abstraction to form alcohols, it appears that iron(IV)-oxo species in MOFs exhibit duality in their reactions with inert hydrocarbon substrates akin to enzymes-if the C-H bonds are in saturated aliphatic hydrocarbons, then activation occurs via hydrogen abstraction, while if the C-H bonds are aromatic, then activation occurs by addition rearrangement.

Synthesis, Characterization, Fluorescence Properties, and DFT Modeling of Difluoroboron Biindolediketonates.

We report a simple and efficient strategy to enhance the fluorescence of biocompatible biindole diketonates (bdks) in the visible spectrum through difluoroboronation (BF2bdks complexes). Emission spectroscopy testifies an increase in the fluorescence quantum yields from a few percent to as much as >0.7. This massive increment is essentially independent of substitutions at the indole (-H, -Cl, and -OCH3) and corresponds to a significant stabilization of the excited state with respect to non-radiative decay mechanisms: the non-radiative decay rates are reduced by as much as an order of magnitude, from 109 s-1 to 108 s-1, upon difluoroboronation. The stabilization of the excited state is large enough to enable sizeable 1O2 photosensitized production. Different time-dependent (TD) density functional theory (DFT) methods were assessed in their ability to model the electronic properties of the compounds, with TD-B3LYP-D3 providing the most accurate excitation energies. The calculations associate the first active optical transition in both the bdks and BF2bdks electronic spectra to the S0 → S1 transition, corresponding to a shift in the electronic density from the indoles to the oxygens or the O-BF2-O unit, respectively.

The role of carbon capture, utilization, and storage for economic pathways that limit global warming to below 1.5°C.

The 2021 Intergovernmental Panel on Climate Change (IPCC) report, for the first time, stated that CO2 removal will be necessary to meet our climate goals. However, there is a cost to accomplish CO2 removal or mitigation that varies by source. Accordingly, a sensible strategy to prevent climate change begins by mitigating emission sources requiring the least energy and capital investment per ton of CO2, such as new emitters and long-term stationary sources. The production of CO2-derived products should also start by favoring processes that bring to market high-value products with sufficient margin to tolerate a higher cost of goods.

Experimental and computational characterization of phase transitions in CsB3H8.

Metal hydroborates are versatile materials with interesting properties related to energy storage and cation conductivity. The hydrides containing B3H8- (triborane, or octahydrotriborate) ions have been at the center of attention for some time as reversible intermediates in the decomposition of BH4- (3BH4-↔ B3H8- + 2H2), and as conducting media in electrolytes based on boron-hydride cage clusters. We report here the first observation of two phase transitions in CsB3H8 prior to its decomposition above 230 °C. The previously reported orthorhombic room temperature phase (here named α-CsB3H8) with the space group Ama2 changes into a new phase with the space group Pnma at 73 °C (here named ß-CsB3H8), and then into a face-centered cubic phase, here named γ-CsB3H8, at 88 °C. These phases are not stable at room temperature thus requiring in situ measurements for their characterization. The phase transitions and decomposition pathway of CsB3H8 were studied with in situ synchrotron powder X-ray diffraction (SR-PXD), in situ and ex situ vibrational spectroscopies (Raman and FTIR), and differential-scanning calorimetry combined with thermo-gravimetric analysis (DSC-TGA). The structure determination was validated by vibrational spectroscopy analysis and modeling of the periodic structures by density functional methods. In γ-CsB3H8, a significant disorder in B3H8- positions and orientations was found which can potentially benefit cation conducting properties through the paddle mechanism.

Beyond Radical Rebound: Methane Oxidation to Methanol Catalyzed by Iron Species in Metal-Organic Framework Nodes.

Recent work has exploited the ability of metal-organic frameworks (MOFs) to isolate Fe sites that mimic the structures of sites in enzymes that catalyze selective oxidations at low temperatures, opening new pathways for the valorization of underutilized feedstocks such as methane. Questions remain as to whether the radical-rebound mechanism commonly invoked in enzymatic and homogeneous systems also applies in these rigid-framework materials, in which resisting the overoxidation of desired products is a major challenge. We demonstrate that MOFs bearing Fe(II) sites within Fe3-µ3-oxo nodes active for conversion of CH4 + N2O mixtures (368-408 K) require steps beyond the radical-rebound mechanism to protect the desired CH3OH product. Infrared spectra and density functional theory show that CH3OH(g) is stabilized as Fe(III)-OCH3 groups on the MOF via hydrogen atom transfer with Fe(III)-OH groups, eliminating water. Consequently, upon addition of a protonic zeolite in inter- and intrapellet mixtures with the MOF, we observed increases in CH3OH selectivity with increasing ratio and proximity of zeolitic H+ to MOF-based Fe(II) sites, as methanol is protected within the zeolite. We infer from the data that CH3OH(g) is formed via the radical-rebound mechanism on Fe(II) sites but that subsequent transport and dehydration steps are required to protect CH3OH(g) from overoxidation. The results demonstrate that the radical-rebound mechanism commonly invoked in this chemistry is insufficient to explain the reactivity of these systems, that the selectivity-controlling steps involve both chemical and physical rate phenomena, as well as offering a strategy to mitigate overoxidation in these and similar systems.

Thermal Treatment Effect on CO and NO Adsorption on Fe(II) and Fe(III) Species in Fe3O-Based MIL-Type Metal-Organic Frameworks: A Density Functional Theory Study.

The properties of metal-organic frameworks (MOFs) based on triiron oxo-centered (Fe3O) metal nodes are often related to the efficiency of the removal of the solvent molecules and the counteranion chemisorbed on the Fe3O unit by postsynthetic thermal treatment. Temperature, time, and the reaction environment play a significant role in modifying key features of the materials, that is, the number of open metal sites and the reduction of Fe(III) centers to Fe(II). IR spectroscopy allows the inspection of these postsynthetic modifications by using carbon monoxide (CO) and nitric oxide (NO) as probe molecules. However, the reference data sets are based on spectra recorded for iron zeolites and oxides, whose structures are different from the Fe3O one. We used density functional theory to study how the adsorption enthalpy and the vibrational bands of CO and NO are modified upon dehydration and reduction of Fe3O metal nodes. We obtained a set of theoretical spectra that can model the modification observed in previously reported experimental spectra. Several CO and NO bands were previously assigned to heterogeneous Fe(II) and Fe(III) sites, suggesting a large defectivity of the materials. On the basis of the calculations, we propose an alternative assignment of these bands by considering only crystallographic iron sites. These findings affect the common description of Fe3O-based MOFs as highly defective materials. We expect these results to be of interest to the large community of scientists working on Fe(II)- and Fe(III)-based MOFs and related materials.

Negative cooperativity upon hydrogen bond-stabilized O2 adsorption in a redox-active metal-organic framework.

The design of stable adsorbents capable of selectively capturing dioxygen with a high reversible capacity is a crucial goal in functional materials development. Drawing inspiration from biological O2 carriers, we demonstrate that coupling metal-based electron transfer with secondary coordination sphere effects in the metal-organic framework Co2(OH)2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) leads to strong and reversible adsorption of O2. In particular, moderate-strength hydrogen bonding stabilizes a cobalt(III)-superoxo species formed upon O2 adsorption. Notably, O2-binding in this material weakens as a function of loading, as a result of negative cooperativity arising from electronic effects within the extended framework lattice. This unprecedented behavior extends the tunable properties that can be used to design metal-organic frameworks for adsorption-based applications.

Structure, Dynamics, and Reactivity for Light Alkane Oxidation of Fe(II) Sites Situated in the Nodes of a Metal-Organic Framework.

Metal organic frameworks (MOFs), with their crystalline, porous structures, can be synthesized to incorporate a wide range of catalytically active metals in tailored surroundings. These materials have potential as catalysts for conversion of light alkanes, feedstocks available in large quantities from shale gas that are changing the economics of manufacturing commodity chemicals. Mononuclear high-spin (S = 2) Fe(II) sites situated in the nodes of the MOF MIL-100(Fe) convert propane via dehydrogenation, hydroxylation, and overoxidation pathways in reactions with the atomic oxidant N2O. Pair distribution function analysis, N2 adsorption isotherms, X-ray diffraction patterns, and infrared and Raman spectra confirm the single-phase crystallinity and stability of MIL-100(Fe) under reaction conditions (523 K in vacuo, 378-408 K C3H8 + N2O). Density functional theory (DFT) calculations illustrate a reaction mechanism for the formation of 2-propanol, propylene, and 1-propanol involving the oxidation of Fe(II) to Fe(III) via a high-spin Fe(IV)═O intermediate. The speciation of Fe(II) and Fe(III) in the nodes and their dynamic interchange was characterized by in situ X-ray absorption spectroscopy and ex situ Mössbauer spectroscopy. The catalytic relevance of Fe(II) sites and the number of such sites were determined using in situ chemical titrations with NO. N2 and C3H6 production rates were found to be first-order in N2O partial pressure and zero-order in C3H8 partial pressure, consistent with DFT calculations that predict the reaction of Fe(II) with N2O to be rate determining. DFT calculations using a broken symmetry method show that Fe-trimer nodes affecting reaction contain antiferromagnetically coupled iron species, and  highlight the importance of stabilizing high-spin (S = 2) Fe(II) species for effecting alkane oxidation at low temperatures (<408 K).

Time-resolved operando studies of carbon supported Pd nanoparticles under hydrogenation reactions by X-ray diffraction and absorption.

The formation of palladium hydride and carbide phases in palladium-based catalysts is a critical process that changes the catalytic performance and selectivity of the catalysts in important industrial reactions, such as the selective hydrogenation of alkynes or alkadienes. We present a comprehensive study of a 5 wt% carbon supported Pd nanoparticle (NP) catalyst in various environments by using in situ and operando X-ray absorption spectroscopy and diffraction, to determine the structure and evolution of palladium hydride and carbide phases, and their distribution throughout the NPs. We demonstrate how the simultaneous analysis of extended X-ray absorption fine structure (EXAFS) spectra and X-ray powder diffraction (XRPD) patterns allows discrimination between the inner "core" and outer "shell" regions of the NP during hydride phase formation at different temperatures and under different hydrogen pressures, indicating that the amount of hydrogen in the shell region of the NP is lower than that in the core. For palladium carbide, advanced analysis of X-ray absorption near-edge structure (XANES) spectra allows the detection of Pd-C bonds with carbon-containing molecules adsorbed at the surface of the NPs. In addition, H/Pd and C/Pd stoichiometries of PdHx and PdCy phases were obtained by using theoretical modelling and fitting of XANES spectra. Finally, the collection of operando time-resolved XRPD patterns (with a time resolution of 5 s) allowed the detection, during the ethylene hydrogenation reaction, of periodic oscillations in the NPs core lattice parameter, which were in phase with the MS signal of ethane (product) and in antiphase with the MS signal of H2 (reactant), highlighting an interesting direct structure-reactivity relationship. The presented studies show how a careful combination of X-ray absorption and diffraction can differentiate the structure of the core, shell and surface of the palladium NPs under working conditions and prove their relevant roles in catalysis.

On the structure of superbasic (MgO)n sites solvated in a faujasite zeolite.

We report the synthesis and characterisation of a HY/MgO zeolite/oxide nanocomposite material with high crystallinity and highly dispersed, highly basic MgO sites. Preparation was optimized in order to preserve sample crystallinity, to avoid the formation of mesoporosity and to minimize the formation of separate Mg-containing phases. These features were checked by means of electron microscopy, X-ray powder diffraction, porosimetry and IR spectroscopy. A highly dispersed material was obtained, comprising nanoclusters of magnesium oxide and hydroxide hosted by the microporous zeolite framework. The location and structure of the Mg-containing clusters have been studied by means of a combination of Rietveld refinement of XRPD data and high quality quantum mechanical simulations. The refinement has shown the presence of magnesium and oxygen atoms in the double six-membered ring cages, consistent with the presence of mononuclear Mg moieties. However, the composition and IR spectroscopy demonstrate that other Mg species must exist, likely located in the zeolite pores. In order to propose candidate structures for these species, several hypothetic periodic models of the material were built by placing (MgO)n clusters in different locations of the zeolite structure, taking into account the material composition and other constraints imposed by the experimental observations. Periodic structures with P1 symmetry were optimized at the B3LYP-D*/DZVP level with the CRYSTAL code and classified according to their stability. Two families of possible sites were identified: highly solvated (MgO)n units in narrow cavities and less coordinated clusters in the supercages. The stability of these clusters appears to be regulated by the ability of Mg2+ and O2- ions to interact with the pore walls and by the formation of Mg-OH species as result of the reaction of Mg-O couples with remaining acidic protons. The reactivity of four representative models with CO2 has been simulated at the B3LYP-D*/TZVP level. CO2 forms very stable linear end-on adducts with low coordinated Mg ions in most cases. Isolated sites give rise to bridge bidentate complexes in agreement with previous spectroscopic observations. The formation of hydrogen-carbonates is observed only on specific sites, through a process having a low adsorption energy because of the high deformation of the adsorption site.

Understanding and Controlling the Dielectric Response of Metal-Organic Frameworks.

Metal-organic framework (MOF) materials have recently been shown to have promising electronic and dielectric properties. This study involves investigating a diverse range of MOFs to rationalise how the different building blocks that form the structure can affect the electronic properties and dielectric response. The analysis, based on quantum mechanical calculations, includes the contribution from the metals involved, the organic linkers and the symmetry and topology of the framework and makes suggestions for future work on low-κ dielectric MOFs. The results confirm that the band gap is primarily due to the electronic levels of the organic linkers and that tuning the band gap can be easily achieved either by linker functionalisation or by increasing the aromaticity. The relevance of simple structure-property relationships for different families of isoreticular MOFs through the use of Hammett sigma constants is also highlighted. It is also shown that the polarisability of the framework can be tuned comparably to the band gap. However, the expected low static dielectric constant is less influenced by the composition of the MOF and can be modified by acting on the crystal structure. Indeed, it is shown that it can be directly linked to the framework porosity.

CO2 Capture in Dry and Wet Conditions in UTSA-16 Metal-Organic Framework.

Water is the strongest competitor to CO2 in the adsorption on microporous materials, affecting their performances as CO2 scrubbers in processes such as postcombustion carbon capture. The metal-organic framework (MOF) UTSA-16 is considered a promising material for its capacity to efficiently capture CO2 in large quantities, thanks to the presence of open metal sites (OMSs). It is here shown that UTSA-16 is also able to desorb fully water already at room temperature. This property is unique from all the other materials with OMSs reported so far. UTSA-16 retains indeed the 70% of its CO2 separation capacity after admittance of water in a test flow, created to simulate the emissions from a real postcombustion carbon-capture process. This important aspect not yet observed for any other amine-free material, associated with a high material stability-tested for 160 cycles-and a small temperature swing necessary for regeneration, places UTSA-16 in the restrict number of systems with a real technological future for CO2 separation.

Solvent-Driven Gate Opening in MOF-76-Ce: Effect on CO2 Adsorption.

A cerium-based metal-organic framework with MOF-76 topology has been synthesized by a very simple and fast solvothermal method that has been tested for a one gram yield. Variable-temperature powder XRD and X-ray absorption data, analyzed by Rietveld and multiple-scattering extended X-ray absorption fine-structure methods, revealed high thermal stability and the presence of three different stable structures. X-ray absorption near-edge structure and FTIR spectroscopy probed the presence of cerium(III), which was characterized by coordinatively unsaturated sites that, however, played no major role in carbon dioxide adsorption. The material revealed excellent carbon dioxide adsorption properties: the highest gravimetric capacity of 15 wt% was observed at 1.1 bar in the case of the sample activated at 250 °C in vacuum, whereas the strongest interaction energy of 35 kJ mol(-1) was observed for the sample activated at 150 °C. Negligible nitrogen uptake of the sample activated at 150 °C indicates that this material is a promising candidate for nitrogen/carbon dioxide separation purposes.

New insights into UTSA-16.

Among the metal organic framework materials proposed for CO2 separation, UTSA-16 possesses the highest CO2 volumetric density explained on the basis of favourable interactions between CO2 and structural water molecules in the material, as revealed by neutron diffraction. In this study, UTSA-16 was synthesised and extensively characterised by XRD, TEM combined with EDX analysis and DR-UV-Vis, Raman and FTIR spectroscopies, as well as by TGA measurements. The synthesised material shows XRD patterns, surface area, CO2 capacity and isosteric heat coincident to the ones reported for UTSA-16 in the original papers but a higher thermal stability and a complete removal of water upon activation under mild conditions (363 K). On the basis of EDX and IR measurements, the formula of UTSA-16 used in the present study is proposed to be K2Co3(cit)2. Infrared spectroscopy clearly shows that UTSA-16 described in this work reversibly interacts with water vapor, CO and CO2. The interaction is attributed to K(+) species, which are present as counterions in the pores. At 1 bar and 298 K a fraction of K(+) sites adsorbs 2 CO2 molecules.

Carbon dioxide adsorption in amine-functionalized mixed-ligand metal-organic frameworks of UiO-66 topology.

A series of mixed-ligand [1,4-benzenedicarboxylic acid (BDC)/2-amino-1,4-benzenedicarboxylic acid (ABDC)] UiO-66 metal-organic frameworks (MOFs) synthesized through two different methods (low (LT) and high temperature (HT)) have been investigated for their carbon dioxide adsorption properties from 0 to 1 bar to clarify the role of amino loading on carbon dioxide uptake. Volumetric CO2 isotherms show that the CO2 capacity (normalized to the Langmuir surface area) increases with a degree of functionalization of about 46%; for similar NH2 contents, the same values are found for both synthetic procedures. Microcalorimetric isotherms reveal that amino-functionalized materials have a larger differential heat of adsorption (q(diff) ) towards CO2 ; reaching 27(25) and 20(22) kJ mol(-1) on HT(LT)-UiO-66-NH2 and UiO-66, respectively, at the lowest equilibrium pressures used in this study. All experimental results are supported by values obtained through quantum mechanical calculations.

Fast carbon dioxide recycling by reaction with γ-Mg(BH4)2.

γ-Mg(BH4)2 was found to be a promising material for CO2 recycling (mainly to formate and alkoxide-like compounds). CO2 conversion occurs with unprecedented fast kinetics at 30 °C and 1 bar. A multi-technique approach allowed to attribute the superior performance of γ-Mg(BH4)2 to its large specific surface area.

Silica-supported Ti chloride tetrahydrofuranates, precursors of Ziegler-Natta catalysts.

The structural and electronic properties of silica-supported titanium chloride tetrahydrofuranates samples, obtained by impregnating a polymer-grade dehydroxylated silica with TiCl4(thf)2 and TiCl3(thf)3 complexes, precursors of Ziegler-Natta catalysts, are investigated by means of FT-IR, XAS, XES and diffuse reflectance UV-Vis spectroscopy, coupled with DFT calculations. The properties of the two silica-supported samples are very similar, irrespective of the starting precursor. In both cases, most of the chlorine ligands originally surrounding the Ti sites are substituted by oxygen ligands upon grafting on silica. As a consequence, the electronic properties of silica-supported Ti sites are largely different from those of the corresponding precursors, and in both cases most of the grafted Ti sites have a formal oxidation state of +4. The whole set of experimental data provide evidence that mono-nuclear Ti species are mainly present at the silica surface.

Monolithic aerogels based on poly(2,6-diphenyl-1,4-phenylene oxide) and syndiotactic polystyrene.

Molecular sorption behavior of amorphous and semicrystalline samples based on poly(2,6-diphenyl-1,4-phenylene oxide) (PPPO) has been compared. Fully amorphous PPPO powders, as obtained by supercritical carbon dioxide (scCO2) extraction of concentrated solutions, present uptake of pollutants much higher than for commercial sorbent materials based on semicrystalline PPPO (Tenax TA). Robust monolithic aerogels with good handling characteristics can be easily obtained by solvent extraction by scCO2 from gels including PPPO blends with syndiotactic polystyrene (s-PS). These monolithic PPPO/s-PS aerogels present many advantages as sorbent materials with respect to both amorphous and semicrystalline PPPO powders. In fact, besides the obvious advantages in terms of easier and safer handling, the new monolithic aerogels present higher surface areas and equilibrium guest uptakes.