A low-cost internal standard loader for solid-phase sorbing tools.

Solid-phase sorption is widely used for the analysis of gaseous specimens as it allows at the same time to preconcentrate target analytes and store samples for relatively long periods. The addition of internal standards (ISs) in the analytical workflow can greatly reduce the variability of the analyses and improve the reliability of the protocols. In this work, we describe the development and testing of a portable system for the reliable production of gaseous mixture of8D-Toluene in a 1L Silonite canister as well as its reproducible loading into solid-phase sorbing tools as ISs. The portable system was tested using needle trap microextraction, solid-phase extraction, and thin-film microextraction techniques commonly employed for the analysis of gaseous samples. Even though our specific interest is in breath analysis, the system can also be used for the collection of any kind of gaseous specimen. A microcontroller allows the fine control of the sampling flow by a digital mass flow controller. Flow rate and sample volume could be set either through a rotary encoder mounted onto the control board or through a dedicated android app. The variability of the airflow is in the range 5-200 ml min-1and it is lower than 1%, whereas the variability of the IS (8D-Toluene) concentration dispensed over time by the loader measured by selected-ion flow-tube mass spectrometry (MS) is <3%. This combination resulted in intra- and inter-day precision of the amount loaded in the sorbent tools lower than 15%. No carry-over was detected in the loader after the delivery of the8D-Toluene measured by gas chromatography-MS. The8D-Toluene concentration in the canister was stable for up to three weeks at room temperature.

Sweat analysis with a wearable sensing platform based on laser-induced graphene.

The scientific community has shown increasing interest in laser scribing for the direct fabrication of conductive graphene-based tracks on different substrates. This can enable novel routes for the noninvasive analysis of biofluids (such as sweat or other noninvasive matrices), whose results can provide the rapid evaluation of a person's health status. Here, we present a wearable sensing platform based on laser induced graphene (LIG) porous electrodes scribed on a flexible polyimide sheet, which samples sweat through a paper sampler. The device is fully laser manufactured and features a two layer design with LIG-based vertical interconnect accesses. A detailed characterization of the LIG electrodes including pore size, surface groups, surface area in comparison to electroactive surface area, and the reduction behavior of different LIG types was performed. The bare LIG electrodes can detect the electrochemical oxidation of both uric acid and tyrosine. Further modification of the surface of the LIG working electrode with an indoaniline derivative [4-((4-aminophenyl)imino)-2,6-dimethoxycyclohexa-2,5-dien-1-one] enables the voltammetric measurement of pH with an almost ideal sensitivity and without interference from other analytes. Finally, electrochemical impedance spectroscopy was used to measure the concentrations of ions through the analysis of the sweat impedance. The device was successfully tested in a real case scenario, worn on the skin during a sports session. In vitro tests proved the non-cytotoxic effect of the device on the A549 cell line.

Electric conductivity measurements employing 3D printed electrodes and cells.

The electric conductivity is one the most routinely inspected characteristics of aqueous media, being employed in monitoring drinking water quality and determining thermodynamic properties of electrolytes. In this work, we utilize fused deposition modelling 3D printing (3DP) to manufacture a platform composed of supporting cells and sensing electrodes for electric conductivity measurements of aqueous solutions. For the first time, the electric conductivity of liquid electrolytes is sensed by 3DP electrodes, employing a direct electrode/electrolyte contact. Conductivity measurements performed in the presented 3DP platform are controlled by an electronic circuitry developed employing a programmable system on chip prototyping kit. The entire conductometric setup was validated employing commercial conductance standards as well as in-lab prepared aqueous solutions of potassium chloride and formic and acetic acid as representatives of strong and weak electrolytes. Conductivity measurements enabled the correct determination of limiting molar conductivity (for potassium chloride) and dissociation constants (for the two weak acids). Finally, the functionality of the presented platform was confirmed by measuring conductivity of various bottled water samples. Results obtained in this work pave the wave for further development and applications of conductometers based on 3DP electrodes and cells.

A Biosensor for the Detection of Acetylcholine and Diazinon.

Acetylcholine is a neurotransmitter and a neuromodulator found in the autonomic, peripheral and central nervous systems. Diazinon is a pesticide with toxic effects on humans, such as the inhibition of acetylcholine. In this paper, a biosensor is proposed for the detection of acetylcholine (range 70 - 1000 µM) and diazinon (range 0.3 - 20000 ppb). This biosensor combines a pH-sensitive layer of reduced graphene oxide functionalized with 4-aminobenzoic acid and acetylcholinesterase. This enzyme was immobilized on reduced graphene oxide and it catalyzed the conversion of acetylcholine into choline and acetic acid, locally decreasing the pH value and triggering the sensor response. The limit of detection for the acetylcholine and diazinon were 70 µM and 0.3 ppb, respectively.

A graphene-based pH sensor on paper for human plasma and seawater.

The relevance of pH assessment in clinical analysis, environmental and industrial control, has raised the demand for the development of portable, low cost and easy-to-use monitoring systems. This paper proposes a pH sensor printed on a paper support passivated with a solid-ink coating. The sensor exploits the pH sensitivity of a reduced graphene oxide functionalized with 3-(4-aminophenil)propionic acid. The sensor responded in the pH range [4], [10] and had a sensitivity of 46 mV/pH. Tests on human plasma and seawater proved this pH sensor to have similar performances than those of a commercial pH-meter with an uncertainty of 0.1 and 0.2 pH unit in plasma and seawater, respectively.

Renormalizable two-parameter piecewise isometries.

We exhibit two distinct renormalization scenarios for two-parameter piecewise isometries, based on 2π/5 rotations of a rhombus and parameter-dependent translations. Both scenarios rely on the recently established renormalizability of a one-parameter triangle map, which takes place if and only if the parameter belongs to the algebraic number field K=Q(5) associated with the rotation matrix. With two parameters, features emerge which have no counterpart in the single-parameter model. In the first scenario, we show that renormalizability is no longer rigid: whereas one of the two parameters is restricted to K, the second parameter can vary continuously over a real interval without destroying self-similarity. The mechanism involves neighbouring atoms which recombine after traversing distinct return paths. We show that this phenomenon also occurs in the simpler context of Rauzy-Veech renormalization of interval exchange transformations, here regarded as parametric piecewise isometries on a real interval. We explore this analogy in some detail. In the second scenario, which involves two-parameter deformations of a three-parameter rhombus map, we exhibit a weak form of rigidity. The phase space splits into several (non-convex) invariant components, on each of which the renormalization still has a free parameter. However, the foliations of the different components are transversal in parameter space; as a result, simultaneous self-similarity of the component maps requires that both of the original parameters belong to the field K.

Flights in a pseudo-chaotic system.

We consider the problem of transport in a one-parameter family of piecewise rotations of the torus, for rotation number approaching 1∕4. This is a zero-entropy system which in this limit exhibits a divided phase space, with island chains immersed in a "pseudo-chaotic" region. We identify a novel mechanism for long-range transport, namely the adiabatic destruction of accelerator-mode islands. This process originates from the approximate translational invariance of the phase space and leads to long flights of linear motion, for a significant measure of initial conditions. We show that the asymptotic probability distribution of the flight lengths is determined by the geometric properties of a partition of the accelerator-mode island associated with the flight. We establish the existence of flights travelling distances of order O(1) in phase space. We provide evidence for the existence of a scattering process that connects flights travelling in opposite directions.

[How to control postoperative pain: intravenous route]. / Controllo del dolore postoperatorio: la via endovenosa.

Intravenous administration of analgesic drugs is one of the most common ways to control post-operative pain. It can be used in almost all kinds of surgical interventions and particularly those of medium and high complexity. Besides, when other techniques are contraindicated because of clinical and/or managing problems, intravenous way finds its best application. Among analgesic drugs NSAID (ketorolac) and opioids (tramadol, morphine, buprenorphine) are most frequently used. As to administration techniques, elastomeric pump is, according to personal experience, a simple-to-manage, practical and precise device with lower cost respect to other administration set. Elastomeric pump is a single use reservoir that allows continuous administration of drugs with a uniform pre-set infusion speed. Finally, guide-lines, showing pre-load and infusion doses of analgesic drugs, based on pain intensity, are presented.

Arithmetical method to detect integrability in maps.

We develop a method to detect the presence of integrals of the motion in symplectic rational maps, by representing these maps over finite fields and examining their orbit structure. We find markedly different orbit statistics depending upon whether the map is integrable or not.

Complexity of regular invertible p-adic motions.

We consider issues of computational complexity that arise in the study of quasi-periodic motions (Siegel discs) over the p-adic integers, where p is a prime number. These systems generate regular invertible dynamics over the integers modulo p(k), for all k, and the main questions concern the computation of periods and orbit structure. For a specific family of polynomial maps, we identify conditions under which the cycle structure is determined solely by the number of Siegel discs and two integer parameters for each disc. We conjecture the minimal parametrization needed to achieve-for every odd prime p-a two-disc tessellation with maximal cycle length. We discuss the relevance of Cebotarev's density theorem to the probabilistic description of these dynamical systems. (c) 2001 American Institute of Physics.

One-dimensional dynamics for traveling fronts in coupled map lattices

Multistable coupled map lattices typically support traveling fronts, separating two adjacent stable phases. We show how the existence of an invariant function describing the front profile allows a reduction of the infinitely dimensional dynamics to a one-dimensional circle homeomorphism, whose rotation number gives the propagation velocity. The mode locking of the velocity with respect to the system parameters then typically follows. We study the behavior of fronts near the boundary of parametric stability, and we explain how the mode locking tends to disappear as we approach the continuum limit of an infinite density of sites.

Embedding dynamics for round-off errors near a periodic orbit.

We study the propagation of round-off errors near the periodic orbits of a linear map conjugate to a planar rotation with rational rotation number. We embed the two-dimensional discrete phase space (a lattice) in a higher-dimensional torus, where points sharing the same round-off error are uniformly distributed within finitely many convex polyhedra. The embedding dynamics is linear and discontinuous, with algebraic integer coefficients. This representation affords efficient algorithms for classifying and computing the orbits and their exact densities, which we apply to the case of rational rotation number with denominator 7, corresponding to certain algebraic integers of degree three. We provide evidence that the hierarchical arrangement of orbits previously detected in quadratic cases [Lowenstein et al., Chaos 7, 49-66 (1997)] disappears, and that the growth of the number of orbits with the period is algebraic.(c) 2000 American Institute of Physics.

[The resolution of a mitral valve prosthesis thrombosis with low-dose plasminogen tissue activator and the role of Doppler echocardiographic monitoring]. / Risoluzione di trombosi di protesi valvolare mitralica con basso dosaggio di attivatore tissutale del plasminogeno e ruolo del monitoraggio ecocardiografico Doppler.

The case of a 63-year-old woman with a Bjork-Shiley mitral valve prosthesis who developed acute thrombosis of mitral prosthesis and acute pulmonary edema is described. Full clinical success was achieved with medical therapy with tissue-type plasminogen activator. The dosage of drug was titrated by serial echo-Doppler examinations of prosthetic structures and functional area. A low-dose (60 mg over 1 hour) of tissue-type plasminogen activator was sufficient to obtain thrombus resolution. Embolic or hemorrhagic complications were absent. This is the first report of successful use of Doppler echocardiography titrated low-dose of tissue-type plasminogen activator for acute thrombosis of mitral prosthetic valve.