Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax.

We describe here the fabrication, characterization, and properties of tough bioplastics made of a babassu oil-based acrylic polymer (PBBM), hemicellulose xylan grafted with PBBM chains, and carnauba wax (CW). The plastic was primarily designed to obtain bioderived materials that can replace low-density polyethylene (LDPE) in certain food packaging applications. To obtain plastic, the radical polymerization of an original babassu oil-based acrylic monomer (BBM) in the presence of xylan macromolecules modified with maleic anhydride (X-MA) was conducted. The polymerization resulted in a material (PBBM-X) mostly consisting of highly branched PBBM/X-MA macromolecules. PBBM-X has a glass transition of 42 °C, a storage modulus of 130 MPa (at 25 °C, RT), and a Young's modulus of 30 MPa at RT. To increase the moduli, we blended PBBM-X with carnauba wax, a natural material with a high modulus and a melting temperature of ~80 °C. It was found that PBBM-X is compatible with the wax, as evidenced by the alternation of the material's thermal transitions and the co-crystallization of BBM side alkyl fragments with CW. As a result, the PBBM-X/CW blend containing 40% of the wax had a storage modulus of 475 MPa (RT) and a Young's modulus of 248 MPa (RT), which is close to that of LDPE. As polyethylene, the PBBM-X and PBBM-X/CW bioplastics have the typical stress-strain behavior demonstrated by ductile (tough) plastics. However, the bioplastic's yield strength and elongation-at-yield are considerably lower than those of LDPE. We evaluated the moisture barrier properties of the PBBM-X/(40%)CW material and found that the bioplastic's water vapor permeability (WVP) is quite close to that of LDPE. Our bioderived material demonstrates a WVP that is comparable to polyethylene terephthalate and lower than the WVP of nylon and polystyrene. Taking into account the obtained results, the fabricated materials can be considered as polyethylene alternatives to provide sustainability in plastics production in the packaging areas where LDPE currently dominates.

Plant Oil-Based Acrylic Latexes towards Multisubstrate Bonding Adhesives Applications.

To investigate the utility of acrylic monomers from various plant oils in adhesives manufacturing, 25-45 wt. % of high oleic soybean oil-based monomer (HOSBM) was copolymerized in a miniemulsion with commercially applied butyl acrylate (BA), methyl methacrylate (MMA), or styrene (St). The compositions of the resulting ternary latex copolymers were varied in terms of both "soft" (HOSBM, BA) and "rigid" (MMA or St) macromolecular fragments, while total monomer conversion and molecular weight of copolymers were determined after synthesis. For most latexes, results indicated the presence of lower and higher molecular weight fractions, which is beneficial for the material adhesive performance. To correlate surface properties and adhesive performance of HOSBM-based copolymer latexes, contact angle hysteresis (using water as a contact liquid) for each latex-substrate pair was first determined. The data showed that plant oil-based latexes exhibit a clear ability to spread and adhere once applied on the surface of materials differing by polarities, such as semicrystalline polyethylene terephthalate (PET), polypropylene (PP), bleached paperboard (uncoated), and tops coated with a clay mineral paperboard. The effectiveness of plant oil-based ternary latexes as adhesives was demonstrated on PET to PP and coated to uncoated paperboard substrates. As a result, the latexes with high biobased content developed in this study provide promising adhesive performance, causing substrate failure instead of cohesive/adhesive break in many experiments.

Tubular electrosynthesis of silica-coated magnetite and evaluation of magnetic nanobiocatalyst efficacy during biomass hydrolysis.

Magnetic nanobiocatalysts (MNBCs) are a promising immobilization approach to ease enzyme recovery during bioprocessing. However, industrial adoption of MNBCs is unfeasible because MNBC-synthesis involves complex and potentially expensive processing steps including synthesis of silica-coated superparamagnetic iron oxide nanoparticles (Si-SPIONs). We developed a single-step process for Si-SPION synthesis using a tubular electrochemical system (TES) and investigated the effect of concentration of the Na2SiO3 coating agent on Si-SPION properties. The Si-SPIONs were used as a support for attachment of polymer-cellulase conjugate to make MNBCs. The spherical Si-SPIONs were 8-12 nm in diameter including a 2-nm silica coating. Na2SiO3 concentration in the reactor did not affect Si-SPION morphology, but increasing Na2SiO3 concentration reduced SPION productivity in the reactor. Protective properties of the SPION silica coatings were demonstrated by showing that they prevented dissolution of SPIONs in an acid solution for 48 h. Enzyme attachment was quantified as protein adsorption on Si-SPIONs which reached 55 µg/mg Si-SPION. The MNBCs were recovered and reused four times. The use of TES for Si-SPION synthesis is promising to reduce MNBC production complexity.

Synergistic Behavior of Plant Proteins and Biobased Latexes in Bioplastic Food Packaging Materials: Experimental and Machine Learning Study.

Plant-based proteins are attractive components which may serve as sustainable alternatives to current petrochemical products. Both soy protein and major corn protein, zein, are of interest in food packaging applications due to their sustainability, biodegradation properties, and inherent physicochemical properties. This study discusses the development of bioplastic materials, where it explores the effects of combining zein, soy protein, and plasticizing latexes derived from plant oil-based monomers (POBMs) on properties of resulting bioplastic films. By looking for synergistic effects of soy protein's inherent film formation ability and zein's higher strength, we prepare strong yet flexible soy-zein films as materials, called proteoposites. Incorporation of natural additive POBM-latexes helps to plasticize and hydrophobize the bioplastic films and thus to improve mechanical and barrier properties. Variation of the POBM-latexes' particle size further aims to enhance the performance of resulting bioplastic films. As a result, modified soy-zein proteoposite films with improved moisture resistance, enhanced mechanical behavior, and greater barrier properties were developed. Machine learning-based computational models were utilized in order to find main structural factors affecting the bioplastic's properties and develop a quantitative structure-property relationship model between the physicochemical properties of the film components and the resulted bioplastics' properties and performance. The developed model effectively predicts experimental outcomes with >85% (R2: 0.85) accuracy. The newly synthesized proteoposites confirmed the machine learning model predictions. As a result, proteoposite films made of two plant proteins and modified with POBM-latexes can be considered as an attractive and viable replacement for petrochemical food packaging products.

Effect of Fatty Acid Polyunsaturation on Synthesis and Properties of Emulsion Polymers Based on Plant Oil-Based Acrylic Monomers.

This study demonstrated that polymerization behavior of plant oil-based acrylic monomers (POBMs) synthesized in one-step transesterification reaction from naturally rich in oleic acid olive, canola, and high-oleic soybean oils is associated with a varying mass fraction of polyunsaturated fatty acid fragments (linoleic (C18:2) and linolenic (C18:3) acid esters) in plant oil. Using miniemulsion polymerization, a range of stable copolymer latexes was synthesized from 60 wt.% of each POBM and styrene to determine the impact of POBM chemical composition (polyunsaturation) on thermal and mechanical properties of the resulted polymeric materials. The unique composition of each plant oil serves as an experimental tool to determine the effect of polyunsaturated fatty acid fragments on POBM polymerization behavior and thermomechanical properties of crosslinked films made from POBM-based latexes. The obtained results show that increasing polyunsaturation in the copolymers results in an enhanced crosslink density of the latex polymer network which essentially impacts the mechanical properties of the films (both Young's modulus and toughness). Maximum toughness was observed for crosslinked latex films made from 50 wt.% of each POBM in the monomer feed.

Glucan Conversion and Membrane Recovery of Biomimetic Cellulosomes During Lignocellulosic Biomass Hydrolysis.

Enzyme immobilization has been identified as one way to recycle enzymes and reduce processing costs during enzymatic hydrolysis of lignocellulosic materials. However, most immobilization methods have not been attractive to lignocellulosic processing plants. In this study, cellulase enzymes were attached to a copolymer of glycidyl methacrylate (GMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) to make polymer-enzyme conjugates (PECs) and facilitate recovery using a 50-kDa molecular weight cutoff membrane. Glucan conversion during biomass hydrolysis was investigated using new PECs and PECs recovered after an initial hydrolysis stage. Enzyme immobilization on PECs did not reduce effectiveness during the initial hydrolysis. Temperature and pH showed similar effects on free enzymes and PECs. PECs facilitated higher conversion rates than free enzymes at high biomass loadings. Recovered PECs were used to achieve approximately 100% glucan conversion in a subsequent hydrolysis step when supplemented with 40% of the free enzyme used in the first stage. The combination of PECs and membrane recovery has the potential to reduce hydrolysis cost during cellulosic bioprocessing.

Environment-Sensitive Polymeric Micelles Encapsulating SN-38 Potently Suppress Growth of Neuroblastoma Cells Exhibiting Intrinsic and Acquired Drug Resistance.

Conventional treatment approaches fail to provide durable control over aggressive malignancies due to intrinsic or acquired drug resistance characteristic of high-risk disease. SN-38, a potent camptothecin analog specifically targeting DNA topoisomerase I cleavage complexes, has shown promise in preclinical studies against aggressive solid tumors. However, its clinical utility is limited by inadequate solubility in pharmaceutically acceptable vehicles and by poor chemical and metabolic stability. Micelles formulated from amphiphilic invertible polymers (AIPs) can address these issues by concomitantly enabling solubilization of water-insoluble molecular cargoes and by protecting chemically labile agents from inactivation. Furthermore, the inversion of the AIP and disruption of the carrier-drug complexes triggered by contact with cell membranes makes it possible to deliver the therapeutic payload into the cell interior without compromising its biological activity. In the present study, we characterized a novel AIP-based micellar formulation of SN-38 and evaluated its growth inhibitory effect on neuroblastoma (NB) cells derived either at diagnosis or at relapse after intensive chemoradiotherapy. Colloidally stable, drug-loaded micellar assemblies with a uniform <100 nm size were prepared using an AIP consisting of alternating blocks of poly(ethylene glycol) and polytetrahydrofuran (PEG600-PTHF650). The micellar drug applied in a low nanomolar range (10-50 nM) completely suppressed the growth of chemo-naïve NB cells even after a brief (10 min) exposure. Furthermore, extending the exposure to 24 h resulted in a profound and lasting inhibitory effect of the micellar formulation on the growth of NB cells exhibiting an acquired loss of p53 function. These results suggest that micelle-mediated delivery of SN-38 can potentially offer a new and effective strategy for treating different phases of high-risk disease, including those showing poor response to conventional therapies.

Detection of macromolecular inversion-induced structural changes in osteosarcoma cells by FTIR microspectroscopy.

Fourier transform infrared (FTIR) microspectroscopy provides a biochemical fingerprint of the cells. In this study, chemical changes in 143B osteosarcoma cells were investigated using FTIR analysis of cancer cells after their treatment with polymeric invertible micellar assemblies (IMAs) and curcumin-loaded IMAs and compared with untreated osteosarcoma cells. A comprehensive principal component analysis (PCA) was applied to analyze the FTIR results and confirm noticeable changes in cell surface chemical structures in the fingerprint regions of 1480-900 cm-1. The performed clustering shows visible differences for all investigated groups of cancer cells. It is demonstrated that a combination of FTIR microspectroscopy with PCA can be an efficient approach in determining interactions of osteosarcoma cells and drug-loaded polymer micellar assemblies. Graphical abstract.

Non-Conventional Features of Plant Oil-Based Acrylic Monomers in Emulsion Polymerization.

In recent years, polymer chemistry has experienced an intensive development of a new field regarding the synthesis of aliphatic and aromatic biobased monomers obtained from renewable plant sources. A one-step process for the synthesis of new vinyl monomers by the reaction of direct transesterification of plant oil triglycerides with N-(hydroxyethyl)acrylamide has been recently invented to yield plant oil-based monomers (POBMs). The features of the POBM chemical structure, containing both a polar (hydrophilic) fragment capable of electrostatic interactions, and hydrophobic acyl fatty acid moieties (C15-C17) capable of van der Waals interactions, ensures the participation of the POBMs fragments of polymers in intermolecular interactions before and during polymerization. The use of the POBMs with different unsaturations in copolymerization reactions with conventional vinyl monomers allows for obtaining copolymers with enhanced hydrophobicity, provides a mechanism of internal plasticization and control of crosslinking degree. Synthesized latexes and latex polymers are promising candidates for the formation of hydrophobic polymer coatings with controlled physical and mechanical properties through the targeted control of the content of different POBM units with different degrees of unsaturation in the latex polymers.

Spatial Distribution and Solvent Polarity-Triggered Release of a Polypeptide Incorporated into Invertible Micellar Assemblies.

Extracting, stabilizing, or delivering biomacromolecules such as proteins and peptides in organic phases have potential applications in biocatalysis, protein extraction, and food antioxidation. However, most current delivery/stabilization platforms face various limitations such as protein/peptide molecular size, platform stability/reusability, and/or potential damage to the cargos. A potential solution to these problems is micellar self-assemblies from amphiphilic invertible polymers, which have recently been demonstrated to be powerful as molecular hosts to deliver both small molecular drugs and functional polypeptides in the aqueous phase. To better understand the function of biomacromolecules and predict the usefulness of the formed invertible micellar assemblies (IMAs) as biomacromolecular hosts in organic phases, it is critical to characterize the spatial distribution, structure, and dynamics of biomacromolecules in the IMA including those upon release. However, the background signals of the IMAs limit the application of most peptide characterization approaches. In this work, we overcome the technical barriers by using site-directed spin labeling electron paramagnetic resonance to probe the spatial arrangement and release of a model, the hemagglutinin (HA) peptide, in the IMAs formed from two different amphiphilic invertible polymers. By site-specifically probing three residues along the peptide chain, for the first time, we depict the possible spatial distribution of HA within the IMAs. By triggering the disassembly of the IMAs with a thermodynamically good solvent (in this study, acetone), we detailed the stability of IMAs in toluene and the peptide release conditions once the polarity of the medium changes. Our findings are important for the application of peptides/proteins at the polar-nonpolar interface or using this interface to extract or deliver biomacromolecules. Our work also demonstrates the power of SDSL-EPR on probing peptide or micelle dynamics, which can be generalized to understand proteins or other biomacromolecules in micellar polymer assemblies in varied applications.

An amphiphilic invertible polymer as a delivery vehicle for a M2e-HA2-HA1 peptide vaccine against an Influenza A virus in pigs.

Influenza A viruses (IAVs) are a group of genetically diverse and economically important zoonotic pathogens. Despite decades of research, effective and broadly protective vaccines are yet to be developed. Recent breakthroughs in epitope-based immunization for influenza viruses identify certain conserved regions of the HA2 and M2e proteins as capable of inducing broad protection against multiple influenza strains. The M2e and HA2 peptides have been evaluated in mice but not as a combination in pigs, which play an important role in the transmission and evolution of IAV. Peptides are inherently weak immunogens; and effective delivery of peptide antigens is challenging. To enhance the delivery and immunogenicity of peptide-based vaccines, the conserved M2e and HA2 and a strain-specific HA1 epitope of Influenza A (H1N1) pdm09 were expressed as a chain in a bacterial expression system and entrapped in a novel amphiphilic invertible polymer made from polyethyelene glycol (PEG, molecular weight 600 g/mol) and polytetrahydrofuran (PTHF, molecular weight 650 g/mol), PEG600PTHF650. Piglets vaccinated with polymeric peptide vaccine mounted significantly stronger antibody responses against the peptide construct when compared to piglets immunized with the multi-epitope peptide alone. When vaccinated pigs were challenged with Influenza A (H1N1) pdm09, viral shedding in nasal secretions and lung lesion scores were significantly reduced when compared to the unvaccinated controls and pigs vaccinated with the peptide alone at six days post-challenge. Thus, the combination of the PEG600PTHF650 polymer and trimeric peptide construct enhanced delivery of the peptide antigen, acted as an adjuvant in stimulating strong antibody responses, reduced the effects of viral infection in vaccinated pigs.

Macromolecular inversion-driven polymer insertion into model lipid bilayer membranes.

Macromolecules of amphiphilic invertible polymers (AIPs) are capable of self-assembly into micellar assemblies of various morphologies in solvents of different polarities. The micellar assemblies in aqueous media are capable of encapsulating poorly aqueous soluble cargo and can undergo inverse conformational change and cargo release in contact with non-polar media, including potentially, cell membranes. Thus, invertible micellar assemblies have significant potential in drug delivery and related domains. However, to date there have been few investigations into their interactions with lipid membranes. Herein, we investigate the interactions of three recently developed AIPs of varying hydrophobicity/hydrophilicity balance with a highly fluidic microcavity supported 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) lipid bilayer. We combined electrochemical impedance spectroscopy (EIS) with fluorescence correlation spectroscopy (FCS) to understand how the AIP micellar assemblies impacted bilayer permeability and fluidity respectively, across polymer concentrations above and below their critical micelle concentrations (cmcs). At concentration as above their cmcs, all of the AIPs explored increased permeability and decreased the fluidity of the lipid membrane. The extent of impact depended on the hydrophobicity of the AIP. PEG600-PTHF650, the most hydrophobic of the polymers, synthesized from PEG (molecular weight 600 g/mol) and PTHF (molecular weight 650 g/mol) exerted the greatest influence on the bilayer's physical properties and fluorescence imaging and correlation data indicate that PEG600-PTHF650 micelles loaded with BODIPY probes adsorb and invert at the lipid membrane with release of cargo into the bilayer. This study should help inform future advancement of AIPs for membrane molecular delivery.

Free-Radical Copolymerization Behavior of Plant-Oil-Based Vinyl Monomers and Their Feasibility in Latex Synthesis.

Vinyl monomers from soybean, sunflower, linseed, and olive oils were copolymerized with styrene (St), methyl methacrylate (MMA), and vinyl acetate (VAc) to determine the reactivity of biobased monomers in radical copolymerization, as well as their feasibility in emulsion processes for the synthesis of biobased latexes. Radical copolymerization of plant-oil-based monomers is described with the classical Mayo-Lewis equation. Using emulsion (or miniemulsion) polymerization with MMA or VAc, stable aqueous polymer dispersions with latex particles measuring 80-160 nm and containing 3-35 wt % of biobased monomer units were successfully synthesized. The number-average molecular weight of the latex copolymers (20 000-150 000) decreases by increasing the degree of unsaturation in monomers and their content in the reaction feed. The presence of plant-oil-based fragments changes the T g of resulting copolymers from 105 to 79 °C in copolymerization with MMA and from 30 to 11 °C in copolymerization with Vac. As a result, biobased units provide considerable flexibility (elongation at break of about 250%) and improve the toughness of the normally rigid and brittle poly(MMA). Even a small amount (2-5%) of biobased fragments incorporated into the structure of poly(VAc) significantly improves water resistance and provides hydrophobicity to the resulting polymer latex films. The obtained results clearly indicate that the vinyl monomers from plant oils can be considered as good candidates for internal plasticization of polymeric materials through reducing intermolecular interactions in copolymers.

Curcumin and Osteosarcoma: Can Invertible Polymeric Micelles Help?

Systematic review of experimental and clinical data on the use of curcumin in the treatment of osteosarcoma is presented. The current status of curcumin's therapeutic potential against bone cancer is analyzed in regard to using polymeric micelles (including recently developed invertible, responsive, micelles) as a platform for curcumin delivery to treat osteosarcoma. The potential of micellar assemblies from responsive macromolecules in a controlled delivery of curcumin to osteosarcoma cells, and the release using a new inversion mechanism is revealed.

Modeling the Effect of pH and Temperature for Cellulases Immobilized on Enzymogel Nanoparticles.

Production costs of cellulosic biofuels can be lowered if cellulases are recovered and reused using particulate carriers that can be extracted after biomass hydrolysis. Such enzyme recovery was recently demonstrated using enzymogel nanoparticles with grafted polymer brushes loaded with cellulases. In this work, cellulase (NS50013) and ß-glucosidase (Novozyme 188) were immobilized on enzymogels made of poly(acrylic acid) polymer brushes grafted to the surface of silica nanoparticles. Response surface methodology was used to model effects of pH and temperature on hydrolysis and recovery of free and attached enzymes. Hydrolysis yields using both enzymogels and free cellulase and ß-glucosidase were highest at the maximum temperature tested, 50 °C. The optimal pH for cellulase enzymogels and free enzyme was 5.0 and 4.4, respectively, while both free ß-glucosidase and enzymogels had an optimal pH near 4.4. Highest hydrolysis sugar concentrations with cellulase and ß-glucosidase enzymogels were 69 and 53 % of those with free enzymes, respectively. Enzyme recovery using enzymogels decreased with increasing pH, but cellulase recovery remained greater than 88 % throughout the operating range of pH values less than 5.0 and was greater than 95 % at pH values below 4.3. Recovery of ß-glucosidase enzymogels was not affected by temperature and had little impact on cellulase recovery.

Impact of enzyme loading on the efficacy and recovery of cellulolytic enzymes immobilized on enzymogel nanoparticles.

Cellulase and ß-glucosidase were adsorbed on a polyacrylic acid polymer brush grafted on silica nanoparticles to produce enzymogels as a form of enzyme immobilization. Enzyme loading on the enzymogels was increased to a saturation level of approximately 110 µg (protein) mg(-1) (particle) for each enzyme. Enzymogels with varied enzyme loadings were then used to determine the impact on hydrolysis rate and enzyme recovery. Soluble sugar concentrations during the hydrolysis of filter paper and Solka-Floc with the enzymogels were 45 and 53%, respectively, of concentrations when using free cellulase. ß-Glucosidase enzymogels showed lower performance; hydrolyzate glucose concentrations were just 38% of those using free enzymes. Increasing enzyme loading on the enzymogels did not reduce net efficacy for cellulase and improved efficacy for ß-glucosidase. The use of free cellulases and cellulase enzymogels resulted in hydrolyzates with different proportions of cellobiose and glucose, suggesting differential attachment or efficacy of endoglucanases, exoglucanases, and ß-glucosidases present in cellulase mixtures. When loading ß-glucosidase individually, higher enzyme loadings on the enzymogels produced higher hydrolyzate glucose concentrations. Approximately 96% of cellulase and 66 % of ß-glucosidase were recovered on the enzymogels, while enzyme loading level did not impact recovery for either enzyme.

Invertible micellar polymer nanoassemblies target bone tumor cells but not normal osteoblast cells.

AIM: To demonstrate the capability of the invertible micellar polymer nanoassemblies (IMAs) to deliver and release curcumin using the recently discovered mechanism of macromolecular inversion to treat bone tumor cells. MATERIALS & METHODS: The effect of IMA-mediated delivery of curcumin on osteosarcoma cell survival was investigated using MTS assays. To assess the effect of IMAs-delivered curcumin on osteosarcoma cell growth, fluorescence-activated cell sorting was performed. The uptake of micellar nanoassemblies was followed using confocal microscopy. RESULTS & DISCUSSION: IMAs-delivered curcumin is effective in blocking osteosarcoma cell growth. It decreases cell viability in human osteosarcoma (MG63, KHOS, and LM7) cells while having no effect on normal human osteoblast cells. It indicates that curcumin-loaded IMAs provide a unique delivery system targeted to osteosarcoma cells.

Solvent-responsive self-assembly of amphiphilic invertible polymers determined with SANS.

Amphiphilic invertible polymers (AIPs) are a new class of macromolecules that self-assemble into micellar structures and rapidly change structure in response to changes in solvent polarity. Using small-angle neutron scattering (SANS) data, we obtained a quantitative description of the invertible micellar assemblies (IMAs). The detailed composition and size of the assemblies (including the effect of temperature) were measured in aqueous and toluene polymer solutions. The results show that the invertible macromolecules self-assemble into cylindrical core-shell micellar structures. The composition of the IMAs in aqueous and toluene solutions was used to reveal the inversion mechanism by changing the polarity of the medium. Our experiments demonstrate that AIP unimers self-assemble into IMAs in aqueous solution, predominantly through interactions between the hydrophobic moieties of macromolecules. The hydrophobic effect (or solvophobic interaction) is the major driving force for self-assembly. When the polarity of the environment is changed from polar to nonpolar, poly(ethylene glycol) (PEG) and aliphatic dicarboxylic acid fragments of AIP macromolecules tend to replace each other in the core and the shell of the IMAs. However, neither the interior nor the exterior of the IMAs consists of fragments of a single component of the macromolecule. In aqueous solution, with the temperature increasing from 15 to 35 °C, the IMAs' mixed core from aliphatic dicarboxylic acid and PEG moieties and PEG-based shell change the structure. As a result of the progressive dehydration of the macromolecules, the hydration level (water content) in the micellar core decreases at 25 °C, followed by dehydrated PEG fragments entering the interior of the IMAs when the temperature increases to 35 °C.

Highly efficient phase boundary biocatalysis with enzymogel nanoparticles.

The enzymogel nanoparticle made of a magnetic core and polymer brush shell demonstrates a novel type of remote controlled phase-boundary biocatalysis that involves remotely directed binding to and engulfing insoluble substrates, high mobility, and stability of the catalytic centers. The mobile enzymes reside in the polymer brush scaffold and shuttle between the enzymogel interior and surface of the engulfed substrate in the bioconversion process. Biocatalytic activity of the mobile enzymes is preserved in the enzymogel while the brush-like architecture favors the efficient interfacial interaction when the enzymogel spreads over the substrate and extends substantially the reaction area as compared with rigid particles.

Invertible micellar polymer assemblies for delivery of poorly water-soluble drugs.

Strategically designed amphiphilic invertible polymers (AIPs) are capable of (i) self-assembling into invertible micellar assemblies (IMAs) in response to changes in polarity of environment, polymer concentration, and structure, (ii) accommodating (solubilizing) substances that are otherwise insoluble in water, and (iii) inverting their molecular conformation in response to changes in the polarity of the local environment. The unique ability of AIPs to invert the molecular conformation depending on the polarity of the environment can be a decisive factor in establishing the novel stimuli-responsive mechanism of solubilized drug release that is induced just in response to a change in the polarity of the environment. The IMA capability to solubilize lipophilic drugs and deliver and release the cargo molecules by conformational inversion of polymer macromolecules in response to a change of the polarity of the environment was demonstrated by loading IMA with a phytochemical drug, curcumin. It was demonstrated that four sets of micellar vehicles based on different AIPs were capable of delivering the curcumin from water to an organic medium (1-octanol) by means of unique mechanism: AIP conformational inversion in response to changing polarity from polar to nonpolar. The IMAs are shown to be nontoxic against human cells up to a concentration of 10 mg/L. On the other hand, the curcumin-loaded IMAs are cytotoxic to breast carcinoma cells at this concentration, which confirms the potential of IMA-based vehicles in controlled delivery of poorly water-soluble drug candidates and release by means of this novel stimuli-responsive mechanism.