Post and Core Treatment to Refit Telescopic Crown-Retained Dentures after Abutment Tooth Fracture: An Evaluation of Therapy by Retrospective Survival Analysis.

Telescopic crown-retained dentures (TCDs) are one of the most common types of prosthetic restorations for partially edentulous patients; however, post and core (PC) treatment shows the worst survival probability if the tooth is used as an abutment for the TCD. Due to extra axial forces, abutment tooth fracture is a common cause of failure for TCDs; thus, PC treatment is often needed to refit the existing telescopic crown (TC). However, there are no clinical survival data on whether the PC treatment was used to refit the TC after abutment tooth fracture (PC2) or the PC was already fitted at the time of TCD treatment (PC1). A total of 246 patients with 399 PC treatments were retrospectively evaluated for follow-ups up to 17.33 years. The files were analysed for PC1 and PC2. Furthermore, the influence of the jaw, type of tooth, luting material, PC material, bone attachment, therapist and cause of failure was recorded. For statistical analysis, Kaplan-Meier and Cox regression analyses were conducted. PC2 showed highly significant lower survival probabilities than PC1 (p < 0.001). Moreover, the bone attachment and the age of the patient at the time of fitting the PC crown had an influence on the survival (p < 0.001). Therefore, PC2 should be carefully discussed with the patient and PC1 should be favoured in endodontically treated abutment teeth for TCDs.

Intraoral scanner-based monitoring of tooth wear in young adults: 36-month results.

OBJECTIVES: The study continues our longitudinal observation of wear aiming to further monitoring of progression and lesion morphology and to identify relationships with assumed aetiological factors. MATERIALS AND METHODS: Molars (FDI #36 or #46) of 74 participants (23.8 ± 2.2 years) were scanned (Trios 3, 3Shape) at the third follow-up (T3; observation period 1,111 ± 10 days). Data sets from T3, T2 (24-month follow-up) and T1 (12-month follow-up) were superimposed with baseline in a 3D analysis software (GOM Inspect). Wear was quantified as maximum vertical tissue loss (µm; median, 95% CI) in various occlusal areas (4/5 cusps and 2 ridges). Morphologies were classified into cupping (C), facet (F), and combined cupping-facet (CF). Aetiological factors were assessed with questionnaires. RESULTS: Wear increased at T3 significantly at low rates in all areas of the occlusal surface (median between 7.0 (4.0;10.5) and 9.5 (6.0;15.0) µm). There was a clear trend for higher loss values in males, but no association with other factors such as nutrition. C and CF showed significantly higher loss values than F. Areas without initial wear developed F first, which either persisted or developed into C and CF. CONCLUSIONS: Wear continued at low rates with C/CF morphology and sex as significant factors. Cupped lesions seem to develop from facets and thus may not be a valid diagnostic criterion for erosive tooth wear. CLINICAL RELEVANCE: Wear is a cumulative process that apparently follows complex mechanisms that cannot be conceptualized in simplified terms; C and CF may be indicators for higher progression rates.

Water absorption in artificial composites: Curse or blessing?

OBJECTIVES: This study evaluated the impact of mutable water uptake on the durability of mechanical properties and the long-term reliability of artificial composites. METHODS: Three resin-based CAD/CAM restorative materials (CRMs) were investigated in three-point bending tests to calculate flexural strength (FS), modulus of elasticity (ME), modulus of resilience (MR), modulus of toughness (MT), and elastic recovery (ER). All specimens (n = 180) were stored under the same conditions and tested in four subsets (n = 15 per material) that were respectively withdrawn after repeated thermocycling (5000 cycles; 5-55 °C, H2O) and repetitive drying (7 d; 37 °C, air). For every specimen, weight differences were determined per storage condition. Likewise, loss tangent data were separately recorded via dynamic mechanical analysis to reliably assess damping characteristics. RESULTS: Repeated thermocycling always induced weight increase and a concurrent significant loss in all mechanical properties except for MT and ER of a polymethylmethacrylate-based CRM. Drying consistently provoked weight loss and raised mechanical properties to initial values. Weight increase, however, enhanced loss tangent values and accordingly distinct damping characteristics, whereas weight decrease markedly lowered damping properties. SIGNIFICANCE: Water uptake repeatedly induced a decrease in common mechanical properties but concurrently increased damping behavior. Invertible equilibrium processes were found with no evidence for permanent material degradation.

Clinical Longevity of Obturators in Patients with Jaw Defects: a Retrospective Cohort Study.

OBJECTIVES: The primary objective of the present retrospective clinical study was to determine the survival time of obturators while analyzing possible influencing factors. MATERIALS AND METHODS: This retrospective clinical cohort study analyzed the influence of various clinical factors on the survival probability of obturators and their follow-up outcomes using Kaplan‒Meier analysis. RESULTS: A total of 76 patients with 115 obturators were included in the study (47 men and 29 women, mean age 58.1 ± 18.1 years). The mean observation time was 3.0 ± 4.5 years (maximum 26.3 years). A total of 40.9% (47) of all obturators observed had to be replaced. The survival rate after 5 years was 79.5% for telescopic-crown-retained tooth-supported obturators, 86.9% for telescopic-crown-retained implant-supported obturators, 58.8% for removable full denture obturators, 22.1% for clasp-retained obturators and 0.0% for splints. The type of attachment, attendance at a regular follow-up and defect cause significantly influenced the survival of the obturators (p < .05). CONCLUSIONS: The findings obtained in this study support the recommendation of using implant-supported obturators. Telescopic-crown attachments, either tooth- or implant-supported, seem to be favorable in terms of survival time. Attendance at a strict follow-up program seems to have a major influence on the longevity of the obturators. CLINICAL RELEVANCE: The use of implant-supported obturators to cover permanent oral and maxillofacial defects is highly recommended. Additionally, the use of telescopic-crown attachments seems to be favorable in terms of survival time. Clasp-retained obturators and surgical splints should be used primarily for temporary restorations due to their shorter survival times.

Update on the Accuracy of Digital Implant Impressions in 2023: A Coordinate-Based Analysis.

PURPOSE: To update data on the transfer accuracy of digital implant impressions by using a coordinate-based analysis, latest intraoral scanners (IOSs) were investigated in an established clinical close model set-up. MATERIALS AND METHODS: An implant master model (IMM) of the maxilla with four implants in the posterior area (#14/#24 and #16/#26) and a reference cube was scanned with four different IOS (i700 (Medit), Primescan (Dentsply Sirona), Trios 4 and Trios 5 (3Shape) ten times each. Datasets were compared with a reference dataset of IMM that was generated with x-ray computed tomography in advance. 3D deviations for the implant-abutment-interface points (IAIPs) were calculated. Statistical analysis was performed by multifactorial ANOVA (p < .05). RESULTS: Overall deviations for trueness (mean) ± precision (SD) of the IAIPs ranged from 88±47 µm for the Primescan, followed by 112±57 µm for the i700, 121±42 µm for the Trios 4 and 124±43 µm for the Trios 5 with decreasing accuracy along the scan path. For trueness, one significant difference between the Primescan and the T4 was detected for one implant position. For precision, no significant differences were noticed. CONCLUSIONS: Although the latest IOS showed a significant improvement in transfer accuracy, the accumulating deviation along the scan path is not yet resolved. Considering the Trios system, the innovation seems to be limited as no improvement could be detected between Trios 4 and 5.

Digital plaque monitoring: An evaluation of different intraoral scanners.

OBJECTIVES: Intraoral scanners (IOS) display disclosed plaque, and the scientific literature has reported that plaque levels can be monitored on intraoral scans using one IOS system (Dexis 3800; control IOS). This study aimed to investigate whether this is also possible with other IOS systems (i700, Primescan, Trios 5; test IOS). MATERIALS AND METHODS: Ten participants (29.6 ± 5.5 years) were enrolled. After plaque accumulation and subsequent toothbrushing, intraoral scans were performed with the control IOS and the three test IOS. All scans were aligned and the vestibular/oral surfaces of the Ramfjord teeth (16, 21, 24, 36, 41, 44) were analysed with automated planimetry using a predefined threshold value. The proportion of pixels assigned to plaque-covered areas was expressed as a percentage of the total number of pixels (P%). We then assessed whether the planimetrically determined plaque-covered areas corresponded to those identified visually. This revealed that a threshold correction (P%corr) was required for approximately 20 % (i700 and Trios 5) to over 65 % (Primescan) of the images. RESULTS: Bland-Altman analysis showed no significant systematic bias and limits of agreement ranging from approximately -20 to +20 P% units, with a tendency towards lower values at higher plaque coverage. Manual correction improved the agreement and halved the limits of agreement. All test IOS could detect a reduction in plaque after brushing, as well as the typical site-dependant plaque distribution patterns. CONCLUSIONS: All test IOS appeared to be suitable for plaque monitoring. Planimetric methods must be adapted to the colour representation of the IOS. CLINICAL SIGNIFICANCE: Plaque monitoring using IOS opens a new field of application in preventive dentistry.

How long must a post be? A retrospective survival analysis on a large cohort with long follow-ups.

OBJECTIVES: Post and core (PC) is frequently used, but clinical evidence concerning how long a post must be is scarce. Recommendations in dental literature range from half of the root which should be incorporated, to post space preparations conducted as deep as possible increasing the risk for root perforation thus tooth loss. Therefore, the aim of this retrospective survival analysis is to evaluate the post length as well as the post-clinical crown ratio on a large patient cohort with long follow-ups. MATERIALS AND METHODS: Overall 1026 PC in 731 patients could be included in this study (2004-2023). The files were analysed due to the parameters post length and post-clinical crown ratio on X-Ray. Furthermore, the influence of the type of covering prosthetic restoration, location, type of tooth, luting material, PC material, bone attachment and therapist was evaluated. The statistical analysis was assessed using Kaplan-Meier (univariate influences) and Cox regression (multifactorial influences). RESULTS: Survival until extraction as well as decementation was significantly influenced by bone attachment and covering prosthetic restoration. Posts reaching the middle third of the root showed highly significant (p < 0.001) better survival probabilities than those reaching the coronal or apical third. Regarding the post-clinical crown ratio, no significant difference was found for post = crown/post > crown, whereas post

Occlusal Caries Detection with Intraoral Scanners in Pediatric Dentistry: A Comparative Clinical Study.

Background: The aim of this clinical study was to compare the occlusal caries detection (OCD) performance of the intraoral scanners (IOSs) Trios 4 (TIO, 3Shape) and Emerald S (EME, Planmeca) and the Diagnocam (DIA, KaVo) with the established visual (WHO) examination (VIS, reference method). Methods: Between 08/2022 and 02/2023, 60 children (mean age 9.6 ± 2.5 years) were examined as part of their regular dental checkups. OCD was performed at the tooth level, separately for primary and permanent unrestored teeth. Furthermore, two thresholds were analyzed: sound versus overall caries (pooled data of enamel and dentin caries, TH1) and pooled data of sound and enamel caries versus dentin caries (TH2). Results: The best agreement with the reference method (reliability) in both dentitions was obtained for DIA (ĸ = 0.829/ĸ = 0.846; primary/permanent teeth), followed by EME (ĸ = 0.827/ĸ = 0.837) and TIO (ĸ = 0.714/ĸ = 0.680). Similar results were shown for the diagnostic quality (sensitivity, specificity and area under the curve of the receiver operating characteristic curve), with higher values for TH1 than for TH2. Both IOSs and the DIA showed worse results than the reference method VIS. Conclusions: Currently, IOS should be used as an additional caries detection tool, especially for visualization, and cannot be recommended as a basic tool for diagnosis or invasive/noninvasive therapy decisions in OCD.

Survival of Double Crown-Retained Implant-Tooth-Supported Removable Partial Dentures: A ≥ 5-Year Clinical Follow-up Study.

PURPOSE: This retrospective clinical follow-up study assesses double-crown retained implanttooth- supported removable partial dentures (DCR-ITSRPDs) survival, evaluates abutment survival and identifies first aftercare measures. MATERIALS AND METHODS: The influence of various factors on the survival of the DCR-ITSRPDs and the abutments were observed in this retrospective clinical follow-up study using Kaplan-Meier estimate. In addition, the first occurred aftercare measure per prosthesis was evaluated. RESULTS: 47 DCR-ITSRPDs were investigated (mean observation: 4.3 ± 3.8 years; max. 14.3 years) out of which three (6.4%) had to be replaced. The 5- and 10- year survival probability for DCR-ITSRPDs was 100% and 75%. A total of 297 abutments (120 natural teeth and 177 dental implants) were observed, of which 22 (7.4%; 6 teeth and 16 implants) failed. The 5- and 10-year survival probability for teeth was 90.2% and for dental implants 90.4% and 76.3%. CONCLUSION: DCR-ITSRPDs are a successful and durable treatment option for patients with substantially reduced residual dentitions. Both, prostheses and abutments show good survival times after 5- and 10-years in function. The patient associated factors tested showed no influence on the survival of DCR-ITSRPs and abutments. Peri implant infection was the decisive factor for abutment loss, therefore, regular dental prophylaxis and examinations are of major importance.

Improving the Communication of Dental Findings in Pediatric Dentistry by Using Intraoral Scans as a Visual Aid: A Randomized Clinical Trial.

The aim of this first randomized clinical trial (RCT) was to determine whether intraoral scans (IOS) can be used as a visual aid to improve the communication of dental findings in pediatric dentistry. Therefore, 60 children (mean age 10.1 ± 3.3 years) and their accompanying parents/primary caregivers were examined between July 2022 and February 2023. Patients were randomly allocated to two groups: half of the participants were informed of the children's dental findings including treatment plans by verbal explanation alone (control group, n = 30), while the other half were informed using IOS (Trios 4, 3Shape) as a visual aid to support the verbal explanation (study group, n = 30). Both groups then completed a questionnaire regarding their children's diagnosis, treatment needs, planned therapy, and oral hygiene. Statistical analysis was performed using a t-test (p < 0.05). Overall, there was a significant difference between the two groups (p < 0.001) in terms of understanding the current oral situation of their children. While 85.5 ± 17.3% (mean ± standard deviation) of the answers were correct in the study group, only 57.2 ± 17.8% of the participants in the control group were capable of answering the questions correctly. In particular, the control group had difficulties answering the questions about treatment needs and therapy correctly. Within the limitations of this first pilot study, IOS can be clearly recommended as a visual aid to improve the communication of dental findings with PGs in pediatric dentistry.

Chairside 3-D printed impression trays: a new approach to increase the accuracy of conventional implant impression taking? An in vitro study.

PURPOSE: A high transfer accuracy of the intraoral implant position to a model is required, to manufacture implant-supported restorations. However, clinically relevant deviations persist between the intraoral implant position and the model obtained, even for the benchmark conventional custom implant impressions with polyether. Thus, new approaches using 3-D printed impression trays may increase the transfer accuracy of implant impressions. The ability to adjust parameters such as the thickness of the layers and the influence of the openings in the impression tray could potentially affect accuracy. METHODS: Four different types of impression trays (n = 10 for each group) for the conventional impression technique were investigated: conventional custom impression tray, customized foil tray, chairside 3-D printed impression tray with the SHERA system, and the Primeprint system using an implant master model with four implants in the posterior region and a reference cube. After plaster model casting, all models were measured using a coordinate measuring machine, and the deviation from the reference dataset was determined. A statistical ANOVA analysis was performed (p < 0.05). RESULTS: Chairside 3-D printed impression trays showed the best results, followed by conventional custom impression trays. Implant impressions obtained using a customized foil tray exhibited the lowest accuracy. Statistically significant differences were observed between 3-D printed impression trays and conventional custom impression and customized foil trays (p < 0.05). Whereas, the implant position did not have any significant influence on accuracy (p > 0.05). CONCLUSIONS: Chairside 3-D printed impression trays significantly increase the transfer accuracy for implant impression taking.

Insights on the digitalisation of dental practices: A cross-sectional pilot study in Hesse.

AIM: Even though today, many fields in dentistry allow digital processes, analogue procedures are still widely used. This cross-sectional pilot study aimed to survey insights on the digitalisation of dental practices using the example of Hesse. MATERIALS AND METHODS: Between April and June 2022, 4840 active practicing dentists registered by the State Dental Association of Hesse were invited via e-mail to fill out an online questionnaire regarding their technical requirements in dental practice, dental treatment procedures, and attitude towards digitalisation in dentistry. Demographic questions were asked. Besides descriptive statistics, correlations were analyzed (P < 0.05). RESULT: Questionnaires of 937 dentists (279 female, 410 male, four inter/divers, 244 no answer; mean age of 51.4 ± 10.4 years) were examined representing a respond rate of 19.36%. In the area of practice administration and dental radiography, the majority of the dentists surveyed is already working digitally, which is predominantly assessed as a positive development. Already one third of the respondents state that they use an intraoral scanner for dental treatments, but the indication is mainly limited to smaller restorations. However, many dentists rate the use of social media accounts and telemedicine rather negative. CONCLUSION: Within the limitation of this pilot study, many processes especially in dental treatments are still analogue. However, 60% of the participants plan digitalisation of their dental practices within the next five years, which indicates a clear shift from analogue to digital dentistry.

Survival of teeth treated with post and core - A retrospective study of more than 1000 cases with observation periods up to 18 years.

OBJECTIVES: Even if survival of post and core (PC) itself was frequently investigated in recent literature, clinical data concerning the risk for extraction of teeth restored with PC is still scarce. Since most authors found the loss of retention of refitable post and cores as the most common cause of failure, it is impossible to draw a conclusion on tooth survival on the results of those studies. Therefore, the aim of the present study was to improve the clinical evidence on the survival of teeth treated with post and cores on a large number of cases over a long observation period. MATERIALS AND METHODS: 735 patients were treated with 1053 post and cores in the observation period (2004-2022) and could be included in the study. The patient files were analysed due to the parameters: Type of covering prosthetic restoration, location, type of tooth, luting material, post and core material, bone attachment and therapist. The survival probability was assessed using Kaplan-Meyer analysis. Cox regression was used to assess possible multifactorial influences. RESULTS: The overall average survival time until necessary extraction of a tooth restored with a post and core was 11.74 years. A root fracture in primary crown retained removeable partial dentures (RPDs) during the first five years was the most common reason for extraction in this study. A significant influence on the survival time of teeth restored with post and cores was found for the type of covering restoration, bone attachment, age of the patient and post and core material. CONCLUSIONS: Post and core restored teeth should be avoided as abutments for primary crown retained RPDs. CLINICAL SIGNIFICANCE: If it is inevitable to utilise post and core restored teeth for primary crown retained RPDs, post and core materials with matching mechanical properties to that of dentine should be preferred.

Fibre-reinforced Cad/CAM post and cores: The new "gold standard" for anterior teeth with extensive coronal destruction?-A fully digital chairside workflow.

Objectives: Since one-third of persons suffer a dental trauma, treatment of anterior teeth using post and core (PC) is becoming important. In teeth with extensive destruction, cast PC (CPC) remain the "gold standard", even though they lead to aesthetic impairment and have a mismatching elastic modulus to that of dentin. Prefabricated fibre-reinforced posts have elastic modulus similar to that of dentin but the accuracy of fit and mechanical stability are worse. This study was aimed to evaluate the deviation and mechanical performance of fibre-reinforced CAD/CAM PC (FRPC) fabricated in a fully digital chairside workflow, compared to those of CPC. Methods: On 30 teeth, a PC preparation was conducted, and a conventional and digital post impression were taken with an intraoral scanner. Fifteen teeth each were treated with CPC and FRPC, respectively. The deviation was evaluated by superimposing the datasets of the digitalised stone models and digital post impressions. Decementation and root fracture during chewing simulation were analysed by microscopy and X-ray. Statistical analysis was performed by pairwise comparison and Kaplan-Meier analysis. Results: The median deviation for the "coronal", "middle" and "apical" were 14.5, 18.0 and 113.7 µm, respectively. The pairwise comparison for "coronal"/"middle" showed no significance (p = 0.465), whereas that for "coronal"/"apical" and "middle"/"apical" showed highly significant differences (p < 0.001). After chewing simulation, five decementations and two root fractures were detected for CPC. For FRPC, neither decementation nor root fracture were documented. Significance: Within the limitations of this study, FRPC performed significantly better than CPC.

Update of students' and lecturers' perspectives on online learning in dental education after a five-semester experience due to the SARS-CoV-2 (COVID-19) pandemic: insights for future curriculum reform.

BACKGROUND: The coronavirus disease (COVID-19) pandemic has accelerated digital transformation in dental education, resulting in a shift from face-to-face teaching to online learning. While online learning could be a common strategy in various fields, the challenge for dental education is that it depends on the requirements of clinical experience to achieve competence in performing the dental treatment. This cross-sectional study aimed to analyse students' and lecturers' perceptions towards online learning after five semesters of experience using a questionnaire survey. METHODS: Since the spring term of 2020, the theoretical part of the curriculum has been conducted in the form of online learning using a combination of synchronous and asynchronous formats. In the following semesters, more theoretical content was shifted back from online learning to face-to-face courses. Preclinical and clinical students enrolled in the dental curriculum during the spring term 2022 semester and all lecturers with at least one year of teaching experience in face-to-face and online learning formats were asked to fill out an online questionnaire regarding the aspects of handling, didactic benefit, motivation, and overall assessment. RESULTS: Students and lecturers rated the implementation of online learning as mostly positive, but pointed out that established 'face-to-face' learning could not be replaced. Moreover, the students reported personal benefits in terms of daily planning. Lecturers also benefitted as their experience increased in online teaching. For future curriculum, students demanded 49.5% (25.1) ((mean (standard deviation) of theoretical part in terms of online learning), while lecturers demanded only 34.1% (24.1). CONCLUSIONS: Despite having no prior need for online learning, students and lecturers showed a positive perspective on online learning which should be considered in the implementation and planning of future dental education. However, in terms of practical training, it cannot replace face-to-face education in dentistry.

Conventional cast vs. CAD/CAM post and core in a fully digital chairside workflow - An in vivo comparative study of accuracy of fit and feasibility of impression taking.

OBJECTIVES: Clinical data for CAD/CAM post and cores (PC) is still scarce, even though developments in digital dentistry have improved dental treatment in many aspects. Therefore, the purpose of this in vivo study was to compare CAD/CAM PC fabricated in a fully digital chairside workflow to conventional cast PC (CPC) according to the accuracy of fit and the impression taking. The null hypothesis was that there is no significant difference between CAD/CAM PC and CPC. METHODS: The study was conducted on 30 teeth in 25 patients receiving a CPC during their prosthetic treatment plan. On each tooth a conventional and a digital post impression were taken. Subsequently, one CPC following a conventional and one CAD/CAM PC following a digital workflow were fabricated. Both PC were tried-in intraorally and assessed according to a standardised evaluation sheet. The deviation between the two impression methods was evaluated by superimposing the datasets in a 3D analysis software. Statistical analysis for pairwise comparison was conducted according to Wilcoxon and median test with a significance level of p = 0.05. RESULTS: CAD/CAM PC performed significantly better compared to CPC according to accuracy of fit (p = 0.022) and feasibility of impression taking (p < 0.001). The deviation between post impression methods increased from "coronal" to "apical". Between "coronal"/"middle" no significant difference (p = 0.158) was detected, whereas the pairwise comparison between the other measurement categories showed significant differences (p = 0.002, p < 0.001). CONCLUSIONS: The null hypothesis was rejected since CAD/CAM PC performed significantly better and the deviation between the post impression methods showed significant differences. CLINICAL SIGNIFICANCE: By using intraoral scanners (IOS) teeth can be restored with customised CAD/CAM PC in a single session. Within the limitations of this study the fully digital chairside workflow led to superior accuracy of fit of PC and higher feasibility of impression taking than the conventional workflow for CPC.

"You should brush your teeth better": a randomized controlled trial comparing best-possible versus as-usual toothbrushing.

BACKGROUND: Most people's tooth brushing performance is deficient, even when they are encouraged to brush to the best of their abilities. The aim of the present study was to explore the nature of this deficit by comparing best-possible vs. as-usual brushing. METHODS: University students (N = 111) were randomly assigned to receive one of two instructions: "brush your teeth as usual" (AU-instruction) or "brush your teeth to the best of your abilities" (BP-instruction). Video analyses assessed brushing performance. The marginal plaque index (MPI) assessed after brushing was used as an indicator of brushing effectiveness. A questionnaire assessed subjectively perceived oral cleanliness (SPOC). RESULTS: Participants in the BP group brushed their teeth longer (p = 0.008, d = 0.57) and used interdental devices more often (p < 0.001). No group differences emerged in the distribution of brushing time among surfaces, the percentage of brushing techniques used beyond horizontal scrubbing, or the appropriate use of interdental devices (all p > 0.16, all d < 0.30). Plaque persisted at the majority of the sections of the gingival margins, and the groups did not differ in this respect (p = 0.15; d = 0.22). SPOC values in the BP group were higher than those in the AU group (p = 0.006; d = 0.54). Both groups overestimated their actual oral cleanliness by approximately twofold. CONCLUSIONS: Compared to their usual brushing effort, study participants increased their effort when asked to brush their teeth in the best possible manner. However, that increase in effort was ineffective in terms of oral cleanliness. The results indicate that people's concept of optimized brushing refers to quantitative aspects (e.g., longer duration, more interdental hygiene) rather than qualitative aspects (e.g., considering inner surfaces and gingival margins, appropriate use of dental floss). TRIAL REGISTRATION: The study was registered in the appropriate national register ( www.drks.de ; ID: DRKS00017812; date of registration: 27/08/2019 - retrospectively registered).

[Geriatric assessment in dentistry : A review of chewing function tests]. / Geriatrisches Assessment in der Zahnmedizin : Eine Übersicht zu Kaufunktionstests.

Due to increasing life expectancy and the associated demographic changes, more and more people are dependent on care. To identify a possible need for dental treatment, chewing function tests as assessment instruments have proven their effectiveness. In this article, the reader is given an overview of existing chewing function tests and their implementation. It is important that a patient with pain should be presented to a dentist immediately, regardless of whether a chewing function test is performed. Furthermore, chewing function tests are not a substitute for routine dental examinations, but they could provide information to (dental) laypersons as to whether an appointment should be arranged in a dental practice or whether a dental consultation is necessary.

What to Prefer in Patients with Multibracket Appliances? Digital vs. Conventional Full-Arch Impressions-A Reference Aid-Based In Vivo Study.

This study aimed to investigate the transfer accuracy and required time for digital full-arch impressions obtained from intraoral scanners (IOSs) versus conventional alginate impressions (CAIs) in patients with multibracket appliances (MBA). Thirty patients with buccal MBAs (metal brackets, archwire removed) were examined using an established reference aid method. Impression-taking using four IOSs (Primescan, Trios 4, Medit i700, Emerald S) and one CAI with subsequent plaster casting were conducted. One-hundred-twenty (n = 30 × 4) scans were analyzed with 3D software (GOM Inspect) and 30 (n = 30 × 1) casts were assessed using a coordinate measurement machine. Six distances and six angles were measured and compared to the reference aid values (ANOVA; p < 0.05). Except for the intermolar distance, transfer accuracy was significantly higher with IOSs than with CAIs (p < 0.05). No such difference was found regarding the six angles. In patients with MBAs, digital impression-taking using IOSs can be recommended. For all measured variables except one, the transfer accuracy of IOSs was better than or at least equivalent to the data from CAIs. In addition, significantly (p < 0.001) less time was necessary for all IOSs in comparison to CAIs plus plaster casting.

Marginal Quality and Wear of Bulk-fill Materials for Class-II Restorations in Primary Molars.

PURPOSE: The aim of this in-vitro study was to evaluate the marginal integrity and wear of eight bulk-fill materials in comparison to a compomer in Class-II cavities in primary molars after thermomechanical loading (TML). MATERIALS AND METHODS: Prepared Class-II cavities in 72 extracted primary molars were filled with eight bulk-fill materials. A compomer served as the control group. After water storage (incubator, 28 days, 37°C), samples were subjected to TML (2500 thermal cycles 5°C/55°C; 100,000 load cycles, 50 N, 1.67 Hz). Before and after TML, replicas were made which were used for both SEM analysis of marginal integrity and 3-D wear analysis. Statistical analysis was performed using Kruskal-Wallis and Wilcoxon tests (p < 0.05). RESULTS: A significant reduction in perfect margins was observed for all groups, while marginal gap formation increased (Wilcoxon test, p < 0.02) for all groups but the compomer. Significant interindividual differences were observed between the tested materials regarding marginal integrity (Kruskal-Wallis test, p < 0.05). Wear analysis revealed no significant differences between groups (Kruskal-Wallis test, p > 0.05). CONCLUSION: Some of the bulk-fill materials investigated here achieved better results than the compomer and should be further evaluated clinically.