Robotic arm-assisted total hip arthroplasty via a minimally invasive anterolateral approach in the supine position improves the precision of cup placement in patients with developmental dysplasia of the hip.

BACKGROUND: This study evaluated the accuracy of the cup alignment angles and spatial cup positioning on computed tomography (CT) images in patients with osteoarthritis secondary to developmental dysplasia of the hip (DDH) who underwent total hip arthroplasty (THA) using a minimally invasive technique via an anterolateral approach in the supine position according to whether a robotic arm-assisted system or a CT-based navigation system was used. METHODS: We reviewed 60 robotic arm-assisted (RA)-THA cases and 174 navigation-assisted (NA)-THA cases. After propensity score matching, there were 52 hips in each group. Postoperative cup alignment angles and position were assessed by superimposition of a three-dimensional cup template onto the actual implanted cup using postoperative CT images with pelvic coordinates matching the preoperative planning. RESULTS: The mean absolute error of the inclination angle and the anteversion angle between the preoperative planning and the postoperative measurement was significantly smaller in the RA-THA group (inclination, 1.1° ± 0.9; anteversion, 1.3° ± 1.0) than in the NA-THA group (inclination, 2.2° ± 1.5; anteversion, 3.3° ± 2.5). For acetabular cup positioning, the mean discrepancy between the preoperative planning and the postoperative measurement was 1.3 ± 1.3 mm on the transverse axis, 2.0 ± 2.0 mm on the longitudinal axis, and 1.3 ± 1.7 mm on the sagittal axis in the RA-THA group and 1.6 ± 1.4 mm, 2.6 ± 2.3 mm, and 1.8 ± 1.3 mm, respectively, in the NA-THA group. High precision of cup positioning was observed in both groups with no statistically significant difference. CONCLUSION: Robotic arm-assisted THA using a minimally invasive technique via an anterolateral approach in the supine position allows accurate cup placement in patients with DDH.

Can TBS reference values be a valid indicator for clinical vertebral fracture? A cross-sectional study.

INTRODUCTION: Trabecular bone score (TBS) is partially independent of fracture risk. Reference values for TBS have not been established in official guidelines, and thus clinicians often have difficulty interpreting TBS results. This study aimed to investigate whether reference values for TBS could be a valid indicator for clinical vertebral fracture (CVF). MATERIALS AND METHODS: This cross-sectional study involved 231 women with CVF and 563 women without CVF aged 60-90 years who underwent dual-energy X-ray absorptiometry during 2019-2023. They were divided into osteoporosis, osteopenia, and normal groups according to bone mineral density of the lumbar spine. Reference values for TBS were defined as low (≤ 1.23), intermediate (1.23-1.31), and high (≥ 1.31). RESULTS: Among patients without anti-osteoporosis treatment (n = 476), the proportion with low TBS was 36.7% in the CVF group and 10.7% in the control group. The proportion with CVF was higher in the low TBS group than in the intermediate and high TBS groups, especially in the osteoporosis group (p < 0.001). The odds ratio for CVF was higher in the low TBS group than in the intermediate and high especially in patients with normal BMD and osteoporosis. The TBS cut-off values for incidence of CVF in the osteoporosis, osteopenia, and normal groups were 1.224, 1.319, and 1.322, respectively. CONCLUSIONS: The reference value for low TBS (≤ 1.23) was useful as an indicator for CVF, especially in patients with osteoporosis. It is expected that reference values for TBS will be established in official guidelines in the future.

Robotic-assisted total knee arthroplasty improved component alignment in the coronal plane compared with navigation-assisted total knee arthroplasty: a comparative study.

The purpose of this study was to directly compare implant placement accuracy and postoperative limb alignment between robotic-assisted total knee arthroplasty and navigation-assisted total knee arthroplasty. This retrospective case-control study included a consecutive series of 182 knees (robotic-assisted group, n = 103 knees; navigation-assisted group, n = 79). An image-free handheld robotic system (NAVIO) or an image-free navigation system (Precision N) was used. Component and limb alignment were evaluated on three-dimensional computed tomography scans and full-length standing anterior-posterior radiographs. We compared the errors between the final intraoperative plan and the postoperative coronal and sagittal alignment of the components and the hip-knee-ankle angle between the two groups. The orientation of the femoral and tibial components in the coronal plane were more accurate in the robotic-assisted group than in the navigation-assisted group (p < 0.05). There was no significant difference in the orientation of the femoral and tibial component in the sagittal plane between the two groups. There were fewer outliers in the tibial coronal plane in the robotic-assisted group (p < 0.05). There was also no significant difference in the frequency of outlying values for coronal or sagittal alignment of the femoral component or sagittal alignment of the tibial component or the hip-knee-ankle angle between the two groups. Robotic-assisted total knee arthroplasty using a handheld image-free system improved component alignment in the coronal plane compared with total knee arthroplasty using an image-free navigation system. Robotic surgery helps surgeons to achieve personalised alignment that may result in better clinical outcomes.

Clinical Outcome of Full Endoscopic Trans Kambin's Triangle Lumbar Interbody Fusion: A Systematic Review.

Full-endoscopic (FE) lumbar interbody fusion (LIF) is now a widely used type of minimally invasive surgery (MIS). Although FE-LIF includes LIF with foraminoplasty via a Kambin's triangle approach (FE-KLIF) and LIF with foraminotomy via an interlaminar approach, these techniques are rarely discussed separately. This review evaluates the outcomes and complications of FE-KLIF reported in the literature. The PubMed, Medline, Embase, Web of Science, and Cochrane Library databases were searched for studies reporting the outcomes of FE-KLIF. Of 464 publications assessed, 11 met our inclusion criteria. Although the most frequently treated level was L4/5, L5/S1 was also treated. FE-KLIF was performed under local anesthesia and sedation or under epidural anesthesia without general anesthesia. Visual analog scale and Oswestry Disability Index scores were improved postoperatively in all uncontrolled studies; however, there was no significant difference in these scores in studies that compared FE-KLIF with posterior LIF (PLIF) or MIS-transforaminal LIF (TLIF). There was also no significant difference in the fusion rate between FE-KLIF and PLIF or MIS-TLIF. In terms of complications, although there were no reports of hematoma, dural tear and surgical site infection were reported in 1 paper each, with transient nerve disorders reported in 5 studies (frequency, 1.8%-23.5%). This review indicates that FE-KLIF is a feasible and viable surgical option for lumbar degenerative disease. However, the amount and level of evidence is low for the studies included in this review, and the data on long-term outcomes remain limited.

Hematogenous prosthetic knee joint infection with Klebsiella pneumoniae caused by asymptomatic gallbladder abscess: a case report and literature review.

Klebsiella pneumoniae has the ability to form biofilm; therefore, the treatment of prosthetic joint infection involving K. pneumoniae is often challenging. This report describes the first case of acute hematogenous prosthetic knee joint infection with K. pneumoniae that occurred as a result of an asymptomatic gallbladder abscess. The patient was a 78-year-old man who underwent bilateral total knee arthroplasty 6 years ago. He had pain and swelling in his right knee. The synovial fluid culture of the right knee revealed K. pneumoniae and prosthetic joint infection was diagnosed. Computed tomography revealed a gallbladder abscess in the absence of right upper abdominal pain. The patient underwent simultaneous debridement of the knee and open cholecystectomy. The treatment was successful and the prosthesis was retained. In cases of hematogenous prosthetic joint infection with K. pneumoniae, other sources of infection should be suspected and investigated regardless of whether they are symptomatic.

Kinematic comparison between the knee after bicruciate stabilized total knee arthroplasty and the native knee: A cadaveric study.

BACKGROUND: Although bicruciate stabilized total knee arthroplasty (BCS-TKA) is expected to provide kinematics similar to those of the normal knee, there are limited data available for comparison of the kinematics of the knee after BCS-TKA with those of the normal knee. The purpose of this study was to confirm whether the knee after BCS-TKA are the same as those of the native knee. METHODS: Seven fresh-frozen cadavers underwent TKA using a BCS-type prosthesis with navigation system. Anteroposterior translation of the femur and internal rotation of the tibia were evaluated using the navigation system. RESULTS: There was no statistically significant difference in anteroposterior translation of the femur between the native knee and the knee after BCS-TKA in the early flexion phase (0°-30°) or in the deep flexion phase (over 100°). In the middle flexion phase (40°-90°), the knee after BCS-TKA was placed significantly more anteriorly than the native knee. The knee after BCS-TKA also showed a gradual internal rotation pattern similar to that of the native knee but the total tibial internal rotation angle was significantly smaller than that of the native knee. At each angle from 0° to 120° of flexion, internal rotation of the knee after BCS-TKA was significantly greater than that of the native knee. CONCLUSION: Kinematics of BCS-TKA is close to that of the native knee. However, there is a statistically significant difference in AP position of the femur during mid flexion and initial rotational position of the tibia between the BCS-TKA knee and the native knee.

Impact of the hip-spine relationship and patient-perceived leg length discrepancy after total hip arthroplasty: A retrospective study.

PURPOSE: Patient-perceived leg length discrepancy (PLLD) is one of the major postoperative complications of total hip arthroplasty (THA). This study aimed to identify factors that cause PLLD following THA. MATERIALS AND METHODS: This retrospective study included a series of consecutive patients who underwent unilateral THA between 2015 and 2020. Ninety-five patients who underwent unilateral THA with postoperative radiographic leg length discrepancy (RLLD) ≤1 cm were classified into two groups according to the direction of preoperative pelvic obliquity (PO). Standing radiographs of the hip joint and whole spine were obtained before and one year after THA. The clinical outcomes and the presence or absence of PLLD was confirmed one year after THA. RESULTS: Sixty-nine patients were classified as having type 1 PO (rising toward the unaffected side) and 26 were classified as having type 2 PO (rising toward the affected side). Eight patients with type 1 PO and seven with type 2 PO had PLLD postoperatively. In the type 1 group, patients with PLLD had larger preoperative and postoperative PO values and larger preoperative and postoperative RLLD than those without PLLD (p = 0.01, p < 0.001, p = 0.01, and p = 0.007, respectively). In the type 2 group, patients with PLLD had larger preoperative RLLD, larger amount of leg correction, and a larger preoperative L1-L5 angle than those without PLLD (p = 0.03, p = 0.03, and p = 0.03, respectively). In type 1, postoperative PO was significantly associated with postoperative PLLD (p = 0.005), but spinal alignment was not an indicator of postoperative PLLD. The area under the curve (AUC) for postoperative PO was 0.883 (good accuracy) with a cut-off value was 1.90° CONCLUSION: Rigidity of the lumbar spine might lead to postoperative PO as a compensatory movement, resulting in PLLD after THA in type 1. Further research on the relationship between flexibility of the lumbar spine and PLLD is needed.

Relationship between iliopsoas muscle surface pressure and implant alignment after total hip arthroplasty: a cadaveric study.

Iliopsoas impingement after total hip arthroplasty is caused by the implant irritating the iliopsoas muscle, but changes in the iliopsoas muscle have not been quantitatively evaluated. This study assessed changes in the surface pressure of the iliopsoas muscle when the implant alignment was varied. Total hip arthroplasty was performed in 10 fresh-frozen cadaveric hips. We evaluated the maximum and mean surface pressure of the iliopsoas muscle with the hip in 20° and 10° extension, the neutral position, and 10° flexion when the anterior cup protrusion length (ACPL), stem version, and stem offset were varied. When the ACPL was changed to 0, 3, and 6 mm in 20° extension, the maximum surface pressure was significantly increased for ACPL of 6 mm compared with 0 mm. Decreased stem anteversion resulted in a significant reduction in both the maximum and mean surface pressure compared with native anteversion from 20° extension to the neutral position. Increased stem offset resulted in significant increases in the maximum and mean surface pressure of the iliopsoas muscle compared with decreased stem offset in 20° extension. Not only large ACPL but also changes in stem version and offset affected the maximum surface pressure of the iliopsoas muscle.

Insertion of a spacer block translates the tibia anteriorly during evaluation of soft tissue balance in cruciate-retaining total knee arthroplasty.

BACKGROUND: Soft tissue balance is an important determinant of the outcome of total knee arthroplasty (TKA). However, there are differences in the joint gap and ligament balance between the osteotomized femoral and tibial surfaces and those after TKA. The aim of this study was to compare the relationship between the femur and tibia at insertion of a spacer block with that after cruciate-retaining (CR) TKA. METHODS: Thirty knees in 30 patients (26 women, 4 men) who underwent primary CR TKA with a navigation system were enrolled. Mean age at surgery was 76.3 (range, 63-87) years. After osteotomy of the femur and tibia, the flexion-extension gap and ligament balance were evaluated using a spacer block. The location of the tibial center in relation to the femoral center in the sagittal plane calculated from navigation data at insertion of an appropriately sized spacer block in knee flexion was compared with that after CR TKA using the paired t-test. RESULTS: The mean sagittal location of the tibial center relative to the femoral center in knee flexion was 5.16 (range, -2.4, 16.3) mm at insertion of the spacer block and 6.60 (range, -1.4, 15.1) mm after CR TKA, and this difference was significant (p = 0.016). CONCLUSION: Assessment of soft tissue balance using a spacer block in CR TKA during knee flexion changes the location of the tibia. Surgeons should be aware of the potential for overestimating the postoperative flexion gap in CR TKA when using a spacer block to assess the flexion gap.

Increased hip flexion angle and protrusion of the anterior acetabular component can predict symptomatic iliopsoas impingement after total hip arthroplasty: a retrospective study.

BACKGROUND: Iliopsoas impingement (IPI) is a known complication of total hip arthroplasty (THA). The aim of this study was to identify risk factors and the cut-off cup protrusion length for symptomatic IPI. METHODS: We retrospectively reviewed 218 hips (46 men, 172 women) of 190 consecutive Japanese patients who underwent primary THA at our institution. Hips with IPI (n = 24) and control hips (n = 194) were compared according to age, body mass index, and clinical scores. We evaluated leg-length discrepancy, global offset, implant alignment angles, pelvic inclination, and anterior cup protrusion on plain radiographs and computed tomography scans. RESULTS: Symptomatic IPI had an incidence of 11.0% and a predilection for hips with osteonecrosis. Pre- and postoperative hip flexion angles were significantly greater in hips with symptomatic IPI (p = 0.013 and p = 0.006, respectively). Cup protrusion length was significantly greater in hips with IPI (4.7 mm vs. 1.4 mm; p = 0.001). Receiver-operating characteristic curve analysis identified a threshold cup protrusion length of 3.9 mm (sensitivity 0.89, specificity 0.63) for symptomatic IPI. The incidence of symptomatic IPI tended to be lower in patients with greater posterior pelvic sagittal inclination despite the cup protrusion length being greater. CONCLUSIONS: An increased hip flexion angle and protrusion of the anterior acetabular component predicted symptomatic IPI. The threshold cup protrusion length suggesting mild IPI might be about 3.9 mm and could be useful for identifying candidates for conservative treatment.

Identifying vertebral fractures in the Japanese population using the trabecular bone score: a cross-sectional study.

BACKGROUND: The trabecular bone score (TBS) is reported to be an independent predictor of fracture risk in patients with primary or secondary osteoporosis. However, there have been few reports on its use in the Japanese population. This study aimed to investigate the risk factors for vertebral fracture in the Japanese population and to evaluate the usefulness of TBS. METHODS: This cross-sectional study involved 279 patients aged 60-90 years in whom bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry (DXA). TBS was calculated based on the DXA scans. The presence or absence of vertebral fractures was assessed from T11 to L5. The patients were divided into those with vertebral fractures (VF group, n = 104) and those without vertebral fractures (non-VF group, n = 175). RESULTS: Of the 104 patients in the VF group, 75 had 1 vertebral fracture and 29 had 2 or more fractures. The mean TBS was 1.28 in the VF group and 1.35 in the non-VF group (p < 0.001). The mean BMD values at the lumbar spine and femoral neck were lower in the VF group (p < 0.001). The areas under the receiver-operating characteristic curve for incidence of vertebral fractures were 0.700, 0.737, and 0.689 for TBS, lumbar spine BMD, and femoral neck BMD, respectively. Multiple logistic regression analysis identified lumbar spine BMD, TBS, and female sex as significant risk factors for vertebral fractures. The proportion of patients in the group with osteoporosis or osteopenia who had vertebral fractures was higher in those with a low TBS (≤ 1.23) than in those with a non-low TBS (> 1.23). CONCLUSION: TBS was a significant indicator of vertebral fractures in the Japanese population and might contribute to identifying patients with vertebral fractures, particularly those with osteopenia who need pharmacologic therapy.

Influence of the glenoid baseplate position on the direction and length of the superior and inferior locking screws.

Introduction : Superior screw insertion in reverse shoulder arthroplasty (RSA) carries the potential risk of suprascapular injury. The purpose of this study was to evaluate how the baseplate position affects the superior screw position and length in RSA. Methods : Three-dimensional (3D) computer simulation models of RSA were established using computed tomography data of baseplates with superior and inferior screws and 3D scapular models from 10 fresh cadavers. Superior screw position, the distance from the superior screw hole to the suprascapular notch, and the screw lengths were measured and compared among various baseplate positions with two inferior tilts (0 and 10 degrees) and three rotational patterns (11-5, 12-6, and 1-7 o'clock in the right shoulder). Results : For the 1-7 o'clock / inferior tilt 0 degrees baseplate, the superior screw located anterior to the SS notch in all shoulders, the distance to the SS notch was the longest (12.8 mm), and the inferior screw length was the shortest (23.1 mm). Conclusion : Although there is a concern of a short inferior screw length, initial fixation using a baseplate with 1-7 o'clock rotation and an inferior tilt of 0 degrees appears preferable for SS nerve injury prevention during superior screw insertion. J. Med. Invest. 69 : 185-190, August, 2022.

Association of spinal anomalies with spondylolysis and spina bifida occulta.

PURPOSE: To investigate the association of spinal anomalies with lumbar spondylolysis and spina bifida occulta (SBO). METHODS: A total of 1190 patients with thoracic, abdominal, and pelvic computed tomography scans available were categorized according to the number of presacral (thoracic and lumbar) mobile vertebrae and the presence or absence of lumbosacral transitional vertebrae (LSTV). The prevalence of spondylolysis and SBO and the association of spinal anomalies with these disorders were evaluated. RESULTS: Normal morphology (17 mobile vertebra with no LSTV) was found in 607 men (86.5%) and 419 women (85.9%) and about 14% of patients had anomalies. Spondylolysis was found in 74 patients (6.2%), comprising 54 men (7.7%) and 20 women (4.1%). SBO involving the lumbar spine was found in 9 men (1.3%) and 2 women (0.4%). Spondylolysis was significantly more common in men with 18 vertebrae without LSTV (21.1%) than in those with 17 vertebrae without LSTV (7.2%) (p = 0.002). The prevalence of spinal anomalies was 55.6% in men and 50.0% in women with SBO that included a lumbar level was significantly higher than in both men (13.5%, p < 0.001) and women (4.8%, p = 0.003) without SBO. CONCLUSION: These findings indicate that there is a relationship between spinal anomalies and both spondylolysis and SBO, which may lead to elucidation of the mechanism of onset of spondylolysis and improve its treatment and prognosis. Awareness that patients with SBO involving the lumbar spine have an increased likelihood of a spinal anomaly may help to prevent level errors during spinal surgery.

Contributions of the ischiofemoral ligament, iliofemoral ligament, and conjoined tendon to hip stability after total hip arthroplasty: A cadaveric study.

An adequate soft tissue balance is important in total hip arthroplasty (THA). This study assessed the contribution of the iliofemoral ligament, ischiofemoral ligament, and conjoined tendon to the range of hip rotation after THA and hip stability in response to axial traction. THA was performed in eight fresh-frozen cadaveric specimens via an anterolateral approach using a navigation system. The ischiofemoral ligament, the medial arm of the iliofemoral ligament, and the conjoined tendon were resected in that order. The ranges of external and internal rotation and the amount of movement of the femoral head in response to axial traction were measured with the hip in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. Resection of the medial arm of the iliofemoral ligament significantly increased the range of external rotation in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. The conjoined tendon was the most important inhibitor of internal rotation from 10° of extension to 30° of flexion. Although each single element had a minor role in stabilizing the hip when axial traction was applied, resection of two or more elements significantly affected joint stability. The iliofemoral ligament and conjoined tendon are the main inhibitors of external rotation and internal rotation, respectively, when THA is performed using an anterior or anterolateral approach. Resection of two or more elements could greatly affect hip stability when axial traction is applied.

Clinical and radiological outcomes of total hip arthroplasty using a highly porous titanium cup or a conventional hydroxyapatite-coated titanium cup: A retrospective study in Japanese patients.

BACKGROUND: A highly porous titanium cup has a unique structure that mimics human trabecular bone and is expected to achieve better outcomes due to rigid fixation and extensive bone ingrowth. Several manufacturers have developed a highly porous titanium cup; however, some have shown a high incidence of radiolucent lines (RLLs) on early postoperative radiographs. In this study, we compared the clinical and radiological outcomes of total hip arthroplasty (THA) using a highly porous titanium cup (OsseoTi, Zimmer Biomet) with those after THA using a conventional hydroxyapatite-coated titanium cup (Trident HA, Stryker). METHODS: A total of 201 hips that underwent THA using an OsseoTi cup (n = 101) or Trident cup (n = 100) were enrolled in the study. Patient characteristics, cup alignment, clinical outcome (determined by the Japanese Orthopedic Association [JOA] score), and incidence of RLLs around the cup were evaluated at 3, 6, 12, and 24 months postoperatively. RESULTS: The clinical outcome was excellent in both groups. The incidence of RLLs was 12.9% at 3 months, 20.8% at 6 months, 23.8% at 12 months, and 22.8% at 24 months after surgery in the OsseoTi group; there were no cases of RLL at any time after surgery in the Trident group. The RLLs were mainly distributed in zone 2. Despite the high rate of RLL in the OsseoTi group, the RLL were narrow and only 5% had a width of >1 mm at 24 months postoperatively. There were no cases with RLLs in all three zones. CONCLUSIONS: Despite excellent clinical outcomes in both study groups, the incidence of RLLs was higher in the OsseoTi group than in the Trident group. Although none of our cases with RLL have required revision surgery for aseptic loosening so far, these patients require careful follow-up.

Optimal baseplate position in reverse shoulder arthroplasty in small-stature Japanese women†:†a cadaveric study.

The purpose of this study was to determine the optimal position of the baseplate on the small glenoid of female Japanese. Two sets of 3D scapular models were made according to the CT data of 7 female cadavers. We set two scenarios of the baseplate placement : A and B. In scenario A, the baseplate was placed on the glenoid face centrally in the anteroposterior direction. In scenario B, the baseplate was implanted at the point where the baseplate post was contained within the glenoid vault. Whether or not the baseplate post perforated the scapular neck was recorded. In scenario A, the central post penetrated the scapular neck posteriorly in 5 scapulae. In scenario B, the average distances from the guide pin position to the anterior glenoid rim was 9.7 ±â€…1.7 mm and the optimal position of the guide pin was 1.9 ±â€…1.7 mm anterior from the glenoid center. The central post was contained within the scapula without breakage of the cortex. This study demonstrated that shifting the center of the baseplate slightly anterior to the anatomic center is necessary to avoid perforation of the scapular neck in small female Japanese. J. Med. Invest. 68 : 175-180, February, 2021.

Insufficient lateral joint laxity after bicruciate-retaining total knee arthroplasty potentially influences kinematics during flexion: A biomechanical cadaveric study.

BACKGROUND: Soft tissue balancing in bicruciate-retaining (BCR) total knee arthroplasty (TKA) is a challenge that must be overcome to achieve excellent clinical outcomes. However, the optimal degree of joint laxity has yet to be clarified. This cadaveric study sought to examine joint laxity after BCR TKA using a navigation system. METHODS: Knee joint laxity was quantified using an image-free navigation system in 8 intact fresh frozen cadavers under three conditions: the native knee, BCR TKA knee, and BCR TKA knee after anterior cruciate ligament resection. Rotational kinematics in the BCR TKA knee during flexion were compared according to whether joint laxity was increased or decreased. RESULTS: Knee joint laxity after BCR TKA under varus-valgus movement, anterior translation, and internal-external rotation loadings was similar to that of the native knee. However, lateral joint laxity was decreased during flexion in some cases. BCR TKA-treated knees with decreased lateral joint laxity at 90° of flexion demonstrated more limited tibial internal rotation in deep flexion than the native knee (p < 0.05). The loss of internal rotation in deep flexion was partly recovered by using a lateral insert with a posterior slope of +3°. CONCLUSIONS: Restoring optimal joint laxity was not always straightforward in BCR TKA if the 4 ligaments were preserved. Lateral joint laxity was potentially decreased in BCR TKA and may result in kinematic conflict during flexion. Surgeons should be aware of the need to achieve sufficient lateral joint laxity in this type of BCR TKA.

Postoperative radiographic evaluation and simulation study for optimal cup placement in high-hip centre total hip arthroplasty.

BACKGROUND: Achieving favourable outcomes in high-hip centre reconstruction in hip dysplasia requires the optimal cup height and size, which can provide sufficient bone coverage for stable cup fixation that fits the anteroposterior acetabular rim without increasing the cup height more than necessary. METHODS: We retrospectively reviewed 214 patients who underwent primary total hip arthroplasty (THA) and identified 30 hips with Crowe II (n = 15) or III (n = 15) developmental dysplasia of the hip (DDH). We measured the cup-centre-edge angle (cup-CE) and the vertical and horizontal distances from the teardrop. In a simulation study, we examined the cup-CE and optimal cup size by changing the cup height in 5-mm increments over a distance of 15-40 mm above the inter-teardrop line using a 3-dimensional template system. RESULTS: Postoperative radiographic evaluation revealed a mean cup-CE of 19.9° in Crowe II hips and 15.2° in Crowe III hips; the respective mean vertical distances were 26.6 mm and 27.6 mm (p = 0.511). There was no evidence of cup loosening or lateralisation at a minimum of 7 years (7-11 years) follow-up. Simulation showed that the hip centre needed to be elevated to 20 mm to acquire a cup-CE of more than 0°. More than 10° of cup-CE could be expected by elevating the hip centre to 25 mm in both Crowe II and III. CONCLUSIONS: Even in severe DDH, a high-hip centre positioned approximately 25 mm superior to the inter-teardrop line was sufficient to achieve optimal bone coverage, which could lead to more secure cup fixation.

Anatomic evaluation of the insertional footprints of the iliofemoral and ischiofemoral ligaments: a cadaveric study.

BACKGROUND: An understanding of the insertional footprints of the capsular ligaments of the hip is important for preserving hip function and stability given the increasing number of minimally invasive hip surgeries being performed under a limited surgical view. However, it is difficult to detect these ligaments intraoperatively and many surgeons may not fully appreciate their complex anatomy. The aims of this study were to quantify the proximal and distal footprints of the iliofemoral ligament (ILFL) and ischiofemoral ligament (ISFL) and to estimate the location of the corresponding osseous landmarks on the proximal femur, which can be detected easily during surgery. METHODS: Twelve hip joints from Japanese fresh frozen cadavers were used. All muscle, fascia, nerve tissue, and vessels were removed to expose the intact capsular ligaments of the hip. The length and width of the proximal and distal footprints of the ILFL and ISFL were measured and their relationship to osseous structures was evaluated, including the intertrochanteric line, femoral neck, and lesser trochanter. RESULTS: The mean length of the distal medial arm of the ILFL footprint was 17.9 mm and the mean width was 9.0 mm. The mean length of the distal lateral arm of the ILFL footprint was 23.0 mm and the mean width was 9.7 mm. For the footprint of the medial arm, the insertion was in the distal third of the intertrochanteric line and that of the lateral arm was in the proximal 42% of this line. The mean distance from the lesser trochanter to the footprint of the medial arm was 24.6 mm. The mean length of the distal ISFL footprint was 11.3 mm and the mean width was 6.9 mm. The footprint of the distal ISFL was located forward of the femoral neck axis in all specimens. CONCLUSIONS: Understanding the size and location of each capsular ligament footprint in relation to an osseous landmark may help surgeons to manage the hip capsule intraoperatively even under a narrow surgical view. The findings of this study underscore the importance of recognizing that the distal ISFL footprint is located relatively forward and very close to the distal lateral arm footprint.

Intra- and inter-rater reliability of a three-dimensional classification system for intertrochanteric fracture using computed tomography.

INTRODUCTION: Intertrochanteric fractures are common fragility fractures in elderly patients. The importance of a reliable classification system for these fractures has been increasingly recognized. The aim of this study was to test the hypothesis that three-dimensional classification by CT has better intra- and inter-observer reliability than conventional two-dimensional classification. MATERIAL AND METHODS: Two hundred and three consecutive patients (39 male, 164 female; mean age 84.5 years) with intertrochanteric fracture were included in the study. In each case, the fracture was classified using the two-dimensional Evans-Jensen and AO/OTA systems that rely on plain radiographs and using a three-dimensional fragment-based CT system. The second evaluation was performed 1 month after the first evaluation by the same examiner to determine intra-observer reliability. Another blinded examiner also classified each case to assess inter-observer reliability. The kappa coefficient was used for determination of intra- and inter-observer reliability. RESULTS: The kappa values for the two-dimensional Evans-Jensen and AO/OTA classification systems showed moderate intra-observer reliability (κ=0.65 and κ=0.61, respectively) and slight inter-observer reliability (κ=0.20 and κ=0.19). The intra-observer kappa value for the three-dimensional classification system was 0.88, indicating almost perfect reliability; the inter-observer kappa value was 0.70, indicating substantial reliability. CONCLUSION: The findings of this study confirm that the fragment-based classification system has high reliability. Surgeons should be aware that the three-dimensional fragment-based CT system for classification of intertrochanteric fractures has better intra-observer and inter-observer reliability than the conventional two-dimensional systems.