A Six-Year Prospective Comparative Study of Wide and Standard Diameter Implants in the Maxillary and Mandibular Posterior Area.

Background and Objectives: The aim of our study was to test whether wide diameter (6 mm) implants perform differently from standard diameter (4 mm) implants in terms of marginal bone level and survival rate. Materials and Methods: Our sample comprised 72 patients who underwent surgery; a total of 80 implants were placed in the maxillary or mandibular molar region. Patients were divided into two groups according to the diameter of the implant, and were followed up for six years after the final setting of the prosthetics. In the test group, 40 implants with 6-mm diameter were inserted; in the control group, 40 standard diameter implants were inserted. Using panoramic radiographs, we investigated mesial and distal marginal bone levels around the implant fixtures. Results: After the first implant surgery, three implants, including one wide diameter and two standard diameter implants, failed due to lack of osseointegration. We did not note any fixture fracture during the six-year follow-up. After loading, we observed a six-year survival rate of 97.29% with no statistically significant difference from standard diameter implants, with a survival rate of 94.87%. Conclusions: This study shows that 6-mm diameter implants may be considered in the presence of adequate alveolar ridge width in the posterior maxillary and mandibular regions.

Micro-CT and Histomorphometric Study of Bone Regeneration Effect with Autogenous Tooth Biomaterial Enriched with Platelet-Rich Fibrin in an Animal Model.

The aim of this study was to evaluate the potential of tooth biomaterials as bone graft biomaterials for bone healing in rabbits. We prepared tooth biomaterial and platelet-rich fibrin (PRF) to fill the round-shaped defect in the skull of New Zealand white rabbits. These cranial defects were treated with different conditions as follows: group 1, a mixture of tooth biomaterials and platelet-rich fibrin (PRF); group 2, only tooth biomaterials; group 3, only PRF; and group 4, the unfilled control group. Specimens of the filled sites were harvested for analysis with microscopic computerized tomography (micro-CT) and histomorphology at 4 and 8 weeks. As a result of micro-CT, at 4 weeks, the bone volume percentages in groups 1 and 2 were 50.33 ± 6.35 and 57.74 ± 3.13, respectively, and that in the unfilled control group was 42.20 ± 10.53 (p = 0.001). At 8 weeks, the bone volume percentages in groups 1 and 2 were 53.73 ± 9.60 and 54.56 ± 8.44, respectively, and that in the unfilled control group was 37.86 ± 7.66 (p = 0.002). The difference between the experimental group 3 and the unfilled control group was not statistically significant. Histomorphologically, the total new bone was statistically different.

Microcomputed Tomography and Histological Study of Bone Regeneration Using Tooth Biomaterial with BMP-2 in Rabbit Calvarial Defects.

Our study was aimed to analyze the osteoinductive effect of powdered and block type autogenous bone graft along with bone morphogenetic protein (BMP-2) as compared to synthetic bone graft. Three circular bicortical defects were made in the calvaria of each rabbit and randomly divided into three groups as follows: powdered tooth biomaterial+BMP-2, block tooth biomaterial+BMP-2, and control group: synthetic bone+BMP-2. The samples taken from these defects after 4 and 8 weeks were analyzed histologically along with micro CT analysis. In our study, both powered and block type tooth autogenous bone graft successfully stimulated mesenchymal cells leading to endochondral ossification and bone regeneration. We observed that the powered bone graft material which is acid insoluble especially is preferable as a carrier for BMP-2.

Histomorphometric Evaluation of Socket Preservation Using Autogenous Tooth Biomaterial and BM-MSC in Dogs.

This study is aimed at assessing the dimensional alterations occurring in the alveolar bone after premolar extraction in dogs with histomorphometric and histological analysis. After atraumatic premolar extraction, tooth-derived bone graft material was grafted in the extraction socket of the premolar region in the lower jaws of six dogs in two experimental groups. In the second experimental group, BM-MSCs were added together with the graft. The control was left untreated on the opposite side. After twelve weeks, all six animals were sacrificed. Differences in alveolar bone height crests lingually and buccally, and alveolar bone width at 1, 3, and 5 mm infracrestally, were examined. Histologic study revealed osteoconductive properties of tooth biomaterial. A statistically significant difference was detected between the test and control groups. In the test groups, a reduced loss of vertical and horizontal alveolar bone dimensions compared with the control group was observed. Tooth bone graft material may be considered useful for alveolar ridge preservation after tooth extraction, as it could limit the natural bone resorption process.

Clinical differences of hand and rotary instrumentations during biomechanical preparation in primary teeth-A systematic review and meta-analysis.

BACKGROUND: The hand and rotary instruments are used for cleaning and shaping of root canals during biomechanical preparation in primary teeth. AIM: To determine clinical differences of hand versus rotary root canal instrumentation in primary teeth. DESIGN: Comprehensive searches were made in four electronic databases [MEDLINE (via PubMed), EMBASE, Google Scholar, and The Cochrane Central Register of Controlled Trials] till March 2020, and prospective studies that met the inclusion criteria were included. The primary outcome was instrumentation time, whereas the secondary outcomes were quality of obturation, obturation time, and clinical and radiographic success. From 604 screened studies, eleven studies qualified for meta-analysis. The random-effect model and generic inverse variance approach were used for meta-analysis. RESULTS: There was significant decrease in instrumentation time [MD-5.00 minutes (95% CI: 3.05-6.94), P < .00001, moderate evidence quality] and obturation time [MD-0.43 minutes (95% CI: 0.15-0.71), P = .003, low evidence quality] with rotary instrumentation. Optimal quality of obturation was achieved in significantly more number of teeth [risk ratio (RR) = 0.71(95% CI: 0.53-0.95),P = .02, moderate to high evidence quality] with rotary instrumentation. Similar clinical and radiographic success was observed in hand and rotary instrumentation techniques. CONCLUSION: Significant reduction in instrumentation time of five minutes was observed using rotary instrumentation with moderate quality evidence.

Lipase mediated functionalization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with ascorbic acid into an antioxidant active biomaterial.

Naturally produced polyhydroxyalkanoates (PHAs) biopolymers have limited medical applications due to their brittle and hydrophobic nature. In this study poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) copolymer was produced using engineered Escherichia coli YJ101, and further functionalized with ascorbic acid using Candida antarctica lipase B mediated esterification. Copolymer P(3HB-co-3HV)-ascorbic acid showed lower degree of crystallinity (9.96%), higher thermal degradation temperature (294.97 °C) and hydrophilicity (68°) as compared to P(3HB-co-3HV). Further, P(3HB-co-3HV)-ascorbic acid biomaterial showed 14% scavenging effect on 1,1-diphenyl-2-picryl-hydrazyl (DPPH), and 1.6 fold increase in biodegradability as compared to P(3HB-co-3HV). Improvement of PHAs polymer properties by adding functional groups could be a good approach to increase their biodegradability, economic value and important applications in the medical field.

Dental Age Difference in Children with ADHD.

OBJECTIVE: The purpose of this study was to determine if changes in dental development are associated with Attention Deficit Hyperactivity Disorder (ADHD) or ADHD medications. STUDY DESIGN: This retrospective chart review evaluated the dental age of 128 patients between 6 and 16 years of age using the Demirjian method from the following two groups a) children with ADHD b) unaffected children. The ADHD group was further stratified into four groups according to the medication type. The impact of ADHD on dental age difference (the difference between dental age and chronologic age) was analyzed using T-test and the association between medication type and dental age difference was analyzed through one way ANOVA. RESULTS: The mean difference between estimated dental age and chronologic age (dental age difference) for all subjects was 0.80 years. There was no significant dental age difference in subjects with ADHD and the control group (0.78±1.28vs. 0.84 ±1.09 years respectively; P=0.75) and there was no significant difference in dental age difference and type of medication (P=0.84). CONCLUSION: No significant difference was found between children with ADHD and unaffected children with respect to dental age difference. No significant differences were found in dental age difference in the four medication groups.

Autogenous tooth transplantation as a treatment option.

Autogenous tooth transplantation is the surgical movement of a tooth from one location in the mouth to another in the same individual. Though done for years but it has achieved variable success rates. Although the indications for autotransplantation are narrow, careful patient selection coupled with an appropriate technique can lead to exceptional esthetic and functional results. This article discusses the reviews of previous works done and highlights the criteria and factors influencing the success of autotransplant along with reports of two cases of transplantation of impacted and malposed canine. How to cite this article: Chugh A, Aggarwal R, Chugh VK, Wadhwa P, Kohli M. Autogenous Tooth Transplantation as a Treatment Option. Int J Clin Pediatr Dent 2012;5(1):87-92.

Vector-G: multi-modular SVM-based heterotrimeric G protein prediction.

Heterotrimeric G proteins interact with G protein-coupled receptors in response to stimulation by hormones, neurotransmitters, chemokines, and sensory signals to intracellular signaling cascades. Recently reported studies indicate that G protein subunits play a significant role in different eukaryotic diseases including inflammation, neurological diseases, cardiovascular diseases, endocrine disorders as well as plant pathogen response, infectious hyphae growth, differentiation and virulence of pathogenic fungi. Thus a study of their functions, signaling pathways, and protein interactions may lead to the development of various preventive approaches. The diversity of alpha, beta and gamma subunits of G proteins necessitates a prediction algorithm that helps in the identification of new proteins such as Gbeta where WD-40 repeats are not well characterized. The currently available techniques for finding G proteins are homology based search analyses and wet lab experiments, which are not very effective in finding new classes of proteins. We present here a robust computational method for finding new G proteins and their homologs using a SVM based pattern recognition algorithm. Several physicochemical and compositional properties including dipeptide, tripeptide and hydrophobicity composition are used for generating the SVM classifiers. This method has 96.17%, 95.38%, 97.6% sensitivity and 99.45%, 100%, 100% specificity on test sets for G protein alpha, beta, and gamma subunits, respectively. This algorithm correctly predicts the known alpha, beta and gamma subunits reported in literature. One important contribution of this algorithm is that it helps in improving genome annotation of several proteins as G proteins and serves as a useful tool for comparative genomic analysis of G proteins. Using this method, novel G protein subunits are predicted in 31 genomes covering plant, fungi and animal kingdom. The software is available at the website http://biomine.cs.uah.edu/bioinformatics/svm_prog/scripts/GProteins/vectorg.html. Supplementary files: The supplementary files are available on http://www.bioinfo.de/isb/2008/08/0013/supplementary_ material/.