Effectiveness of traditional band and loop space maintainer vs 3D-printed space maintainer following the loss of primary teeth: a randomized clinical trial.

This study evaluates the efficacy of 3D-printed band and loop space maintainers (3D-BLSMs) to mitigate concerns caused by early primary tooth loss in children when compared to their conventional equivalents. Over 9 months, 62 participants aged 6 to 12 years participated in a randomized clinical study. This study evaluated their failure rates (de-cementation, debonding, solder breakage, loop breakage, band breakage, and abutment tooth fracture), gingival health, and patient overall satisfaction. Random assignments were made to place the participants in two groups: traditional band and loop space maintainers or the 3D-BLSMs. The findings show that at 9 months, 3D-BLSMs provided significantly higher survival rates (77.4%) than conventional maintainers (51.6%, p < 0.01). Gum inflammation was mild in both groups, highlighting the need for good oral hygiene. In both groups, patient satisfaction exceeded 90%. Although there was some pain at first with 3D-BLSMs, this eventually subsided and aesthetic preferences disappeared. There were no negative consequences noted, and both groups needed ongoing dental treatment. In conclusion, with excellent patient satisfaction in both groups, 3D-printed space maintainers offer greater long-term durability in reducing dental concerns following early primary tooth loss.

Perceptions and challenges of online teaching and learning amidst the COVID-19 pandemic in India: a cross-sectional study with dental students and teachers.

BACKGROUND: Online education has emerged as a crucial tool for imparting knowledge and skills to students in the twenty-first century, especially in developing nations like India, which previously relied heavily on traditional teaching methods. METHODS: This study delved into the perceptions and challenges experienced by students and teachers in the context of online education during the COVID-19 pandemic. Data were collected from a sample of 491 dental students and 132 teachers utilizing a cross-sectional research design and an online-validated survey questionnaire. RESULTS: The study's findings revealed significant insights. Internet accessibility emerged as a major impediment for students, with online instruction proving more effective for theoretical subjects compared to practical ones. Although most teachers expressed comfort with online teaching, they highlighted the absence of classroom interaction as a significant challenge. CONCLUSION: This study comprehensively examines the perspectives of both students and teachers regarding online education during the pandemic. The results carry substantial implications for the academic community, underscoring the need to address internet access issues and explore ways to enhance engagement and interaction in online learning environments.

Repair versus Replacement of Defective Direct Dental Restorations: A Multinational Cross-sectional Study with Meta-Analysis.

OBJECTIVES: When dental practitioners encounter a defective restoration, they are faced with a crucial decision whether to repair or replace it. This study aims to explore international preferences for repair procedures and the clinical steps taken during the repair process. METHOD: An 11-question survey was distributed to dentists across 21 countries via different platforms. The survey comprised two sections: the first included five questions aimed at gathering demographic information, while the second consisted of six questions focusing on participants' practices related to the repair of composite or amalgam restorations A meta-analysis was employed to ascertain the pooled odds ratio of repairing versus replacement. The statistical analysis was carried out using the RevMan 5.3 program and forest plots were generated using the same program to visualize the results. RESULTS: The survey was completed by 3680 dental practitioners. The results indicated a strong tendency to repair defective composite restorations (OR: 14.23; 95% CI: 7.40, 27.35, p<0.001). In terms of amalgam, there was a significant tendency to replace the restorations (OR: 0.19; 95% CI: 0.12, 0.30, p<0.001). When repairing restorations, the most common protocols were etching with orthophosphoric acid and creating an enamel bevel, regardless of the restorative material used. CONCLUSION: The findings of this study indicate that there exists a knowledge gap among dental practitioners regarding restoration repair. It is imperative that dental practitioners receive proper education and training on restoration repair, to ensure the usage of adequate protocols and restoration survival.

Evaluation of pre-heated composite resins with soft-start polymerization and conventional composite restorations in class-I carious lesions - A randomized clinical trial.

Background: By increasing fluidity and conversion, pre-heated composites enhance adaptability and strength, while soft-start polymerization decreases internal stresses. Aim: Over a period of a year, this split-mouth design, randomized controlled clinical trial (RCT) compared pre-heated composites with soft-start polymerization to conventional composites in class-I lesions, with the goal of improving restoration outcomes. Methods: and Findings: Immediately following ethical approval and registration with CTRI, 37 patients with in-formed permission who met specified inclusion and exclusion criteria for class-I lesions were chosen for enrollment. Using a 1:1 ratio, teeth were randomly assigned to Group-A (pre-heated composite with soft-start polymerization) or Group-B (traditional composite restoration). At three-time intervals, the evaluation was blinded and calibrated using Modified United States Public Health Service (USPHS) criteria: baseline, six-month, and one-year marks. Statistical analysis was performed using SPSS 21.0 and the Mann-Whitney U test for inter-group comparisons and the Friedman test for intra-group comparisons. Interpretation: Pre-heated composites with soft-start polymerization performed better in terms of marginal adaptation with a statistically significant difference (p = 0.019) and in terms of color match they performed better clinically (p = 0.062) at 12 months. Other variables like marginal discolouration, sec-ondary caries, anatomic form, post-operative sensitivity, surface texture and retention showed no statistically significant difference (p < 0.05). Pre-heated composites with soft-start mode performed marginally better than nanofilled composites. However, both techniques can be used to successfully restore simple class-I carious lesions.

Sexual dimorphism of maxillary sinuses in adult population using cone-beam computed tomography. A pilot study.

Objective: This study aims to evaluate the sexual dimorphism of maxillary sinuses (MS) using cone-beam computed tomography (CBCT). Method: A total of 80 CBCT scans were taken from Peruvian patients aged between 20 and 70 years-old. The dimensions (length, width, and height) of the MS were measured and evaluated. The data were analyzed using the Mann-Whitney U test with a significance level of p < 0.05. Results: The left MS was wider than the right MS. Meanwhile, the right MS was longer than the left MS. In addition, the height of the right and left MS was significantly different in males and females, with p-value of 0.003 and 0.044 respectively. Bigger dimension of height of the MS was found in patients aged between 30 and 39 as well as patients aged between 40 and 49, whereas smaller dimension of height of the MS was found in patients aged between 60 and 70. Furthermore, the height of the right MS was significantly different in dentate and edentulous patients, with p-value of 0.033 and 0.043 respectively. The height of the right MS was predicted at 65 % in males and 70 % in females (p = 0.002). Conclusion: The morphometry of the maxillary sinuses can be used for predicting sexual dimorphism.

Retrospective evaluation of the morphometric properties of intact maxillary sinus using cone-beam computed tomography for sex estimation in an Indian population.

Background: Sex estimation is crucial to forensic examinations. In order to estimate sex, intact bones are used if the majority of bones are severely deformed and recovered in fragments. This study aims to analyze sexual dimorphism in intact maxillary sinuses using CBCT scanning to evaluate morphometric properties for sex identification. Methods: A total of 318 subjects, consisting of 159 males and 159 females, aged between 20 and 60 years without sinus pathology were included in this diagnostic, retrospective cross-sectional study. Bilateral measurements of the volume, height, width, and length of the maxillary sinuses were obtained and compared to evaluate the differences between sexes. Subsequently, a descriptive analysis using mean and standard deviation was performed, followed by a comparison between sexes with a p-value being less than 0.05 and Student's t-test. Finally, a discriminant analysis was performed separately for the right and left maxillary sinuses. Results: Males and females showed statistically significant variations in the length, width, and volume of the maxillary sinuses. Specifically, on the right side, males had longer maxillary sinuses than females (t = 5.6203, p < 0.0001). Meanwhile, on the left side, females had wider maxillary sinuses than males (t = 8.621, plt0.0001). In addition, males had greater volumes of maxillary sinuses on the right (t = 6.373, p < 0.0001) and left (t = 3.091, p < 0.0001) sides than females. The results of the discriminant analysis showed that the left width parameter had the highest accuracy of sex estimation (74.21%), followed by the Right Length (70.07%) and left volume (66.66%) parameters. The left height parameter had the lowest accuracy of sex estimation (49.37%). Conclusion: In forensic odontology, the volume of maxillary sinus can serve as a valid radiographic indicator of sex estimation.

Distolingual root prevalence in mandibular first molar and complex root canal morphology in incisors: a CBCT analysis in Indian population.

Cone-beam computed tomography was used to understand the possible correlation between the prevalence of distolingual root (DLR) in permanent mandibular first molars (MFMs) and the associated complicated mandibular incisor's root canal morphology (MIs) in an Indian population. A total of 400 scans were evaluated for MFMs and MIs. The prevalence of DLRs and root canal anatomy of MIs were assessed based on Vertucci's classification, and then the sample were grouped according to age, sex and side. Statistical analysis was used to evaluate the possible correlation between the presence of DLRs in the first molar and root canal morphology of incisors. Chi square test was used to evaluate the correlation between the root canal configurations of MIs with the existence of DLRs in MFMs. There was no statistically significant difference between sexes or ages for the prevalence of DLRs in the first molars (p > 0.05), which was 6.62%, with the right side having a greater frequency of DLRs (7.8%) than the left (5.5%). Vertucci Type I canal configuration was most common for the mandibular central (66.75%) and lateral incisors (58.62%). Vertucci Type III was the most common complicated canal morphology, followed by Types V, II, and IV for MIs, with no statistically significant difference in the studied sample's age and sex. (p < 0.05). No association was observed between the presence of DLRs in first molars and complicated root canal configurations in MIs. Taken together, the possibility of complicated root canal configuration in MIs was lesser in the presence of DLRs in MFMs among the Indian population.

LPS-Induced Neuron Cell Apoptosis through TNF-α and Cytochrome c Expression in Dental Pulp.

OBJECTIVES: Inflammation of the dental pulp tissue caused by bacteria, creating an immunology response of death of the dental pulp, is called apoptosis. The Porphyromonas gingivalis that cause apoptosis is lipopolysaccharide (LPS) through toll-like receptor (TLR) via two different mechanisms, intracellular and extracellular pathways. This study analyzed the role of LPS exposure of neuron cells, tumor necrosis factor-α (TNF-α), and cytochrome c (cyt-c) expression in the dental pulp to predict the possible mechanism of apoptosis. MATERIALS AND METHODS: The lower tooth of Sprague Dawley rats was opened and exposed to LPS for 48 hours. Then the neuron cell analyzed histopathology using hematoxylin-eosin, whereas the TNF-α and cyt-c expression with indirect immunohistochemistry using a light microscope. The relationship between neuron cells with TNF-α and cyt-c was analyzed using stepwise regression linear analysis. RESULT: The LPS exposure showed a lower number of neuron cells and had a relationship with TNF-α expression but not with cyt-c, while compared with control, both TNF-α and cyt-c expression were higher in neuron cells. CONCLUSION: LPS exposure in dental pulp is possible to stimulate the apoptosis process through extracellular pathways marked by higher TNF-α expression.

Computed tomography-based assessment of sphenoid sinus and sella turcica pneumatization analysis: a retrospective study.

Background: A preoperative three-dimensional examination of the sphenoid sinus anatomy, its pneumatization pattern, and its relevance to neighboring neurovascular constructions is crucial to preventing possible complications. In this study, the aim was to evaluate the relationship between sphenoid sinus pneumatization types and the sella turcica using computed tomography (CT). Methods: CT data from 420 patients referred to the Department of Dentomaxillofacial Radiology were evaluated retrospectively. Sella pneumatization types were classified as conchal, presellar, incomplete sellar, and complete sellar, and they were evaluated. Obtained data were evaluated using the IBM SPSS 25.0 (Armonk, New York, USA) package program. Results: CT images of 420 individuals, including 174 women and 246 men with a mean age of 43.87 ± 17.58 years, were included in the study. When the sella turcica morphologies were evaluated, the most widespread morphological type was irregularity in the posterior part of the dorsum sella, in 51.2% of cases. In addition, a statistically significant correlation was found between the pneumatization of the sphenoid sinus and the morphological types of sella (p < 0.05). Conclusion: In this research endeavor, the predominant observation comprised the complete sellar sphenoid sinus pneumatization type, exhibiting irregularity in the posterior aspect of the dorsum sella, representing one of the sellar types. Notwithstanding, it is imperative to conduct additional investigations to establish the generalizability of the present study's findings.

Bibliometric Analysis of Context, Trends, and Contents of Digital Health Technology Used in Dental Health.

Digital tools and apps are revolutionizing healthcare and provide creative answers to urgent problems. Through teamwork and the incorporation of digital technologies, dentistry has experienced a remarkable revolution. A large body of scholarly research backs up this trend. The context, trends, and content of digital health technology in oral and dental health are examined in our bibliometric analysis. Using targeted keywords and synonyms, an organized searching technique was used in the Scopus database, yielding 1942 articles that were extracted into a CSV file. To acquire insights into the content, trends, and context, visualization using VOSviewer 1.6.18 and a variety of analyses-including coauthorship, citation, cooccurrence of author keywords, bibliographic coupling, and cocitation-were executed. The analysis revealed that the USA and the UK contributed to a significant quantity of the literature, with newer contributions coming from nations like India. Cone Beam Computed Tomography, Dental Caries, and Artificial Intelligence were prominent keywords. It is important to note that BMC Oral Health was associated with a sizable number of the papers. This bibliometric analysis provides insightful information about the context, content, and trends of digital health in the field of oral and dental health. By implementing the right technology, policymakers can use this information to increase oral health, encourage dental literacy, and improve access to dental treatment. It is vital to take into account the wide variety of technologies and their classifications based on dental services and contextual variables.

Adaptive instrumentation of root canals in primary teeth using XP-endo shaper: a case series.

Dental caries is indeed the biggest cause of tooth loss, particularly in the primary dentition. In primary teeth with carious pulp involvements, endodontic intervention in the form of pulpotomy (removal of only the coronal pulp) or pulpectomy (removal of coronal and radicular pulp) is advocated. Pulpectomy can be laborious and time-consuming, especially when using traditional hand endodontic files to shape root canals. In paediatric dentistry, motorised nickel-titanium (Ni-Ti) rotary instrumentation has proved significant in enhancing the quality of pulpectomy. In primary dentition, however, these files may leave more than half of the root canals unaltered by instrumentation, just as they do in permanent dentition. The XP-endo® Shaper is a revolutionary heat-dependent endodontic file that uses an asymmetrical rotating motion to address the maximum area of the root canal space, resulting in anatomic root canal instrumentation. The case series describes the use of this novel XP-endo® Shaper file for anatomic root canal instrumentation in primary molars with irreversible pulpitis. The purpose is to demonstrate the efficacy and advantages of this cutting-edge endodontic treatment method. This case series can be an informative resource for other endodontic specialists by providing a practical illustration of how adaptable instrumentation can be utilised to successfully treat a patient. In conclusion, The use of the XP-endo Shaper® for pulpectomy demonstrated faster and instrumentation that was confined with the original shape of the canals, although further research is required to fully utilise these findings.

Deep convolutional neural network algorithm for the automatic segmentation of oral potentially malignant disorders and oral cancers.

This study aimed to develop an algorithm to automatically segment the oral potentially malignant diseases (OPMDs) and oral cancers (OCs) of all oral subsites with various deep convolutional neural network applications. A total of 510 intraoral images of OPMDs and OCs were collected over 3 years (2006-2009). All images were confirmed both with patient records and histopathological reports. Following the labeling of the lesions the dataset was arbitrarily split, using random sampling in Python as the study dataset, validation dataset, and test dataset. Pixels were classified as the OPMDs and OCs with the OPMD/OC label and the rest as the background. U-Net architecture was used and the model with the best validation loss was chosen for the testing among the trained 500 epochs. Dice similarity coefficient (DSC) score was noted. The intra-observer ICC was found to be 0.994 while the inter-observer reliability was 0.989. The calculated DSC and validation accuracy across all clinical images were 0.697 and 0.805, respectively. Our algorithm did not maintain an excellent DSC due to multiple reasons for the detection of both OC and OPMDs in oral cavity sites. A better standardization for both 2D and 3D imaging (such as patient positioning) and a bigger dataset are required to improve the quality of such studies. This is the first study which aimed to segment OPMDs and OCs in all subsites of oral cavity which is crucial not only for the early diagnosis but also for higher survival rates.

Comparison of Postoperative Pain After the Utilization of Different File Systems in Single Visit Endodontics.

Purpose: This prospective single-blind, parallel-group, randomized clinical trial was aimed to compare the effect of three different rotary instrumentation systems ProTaper Next (PTN), Self-Adjusting File (SAF) and XP-endo Shaper (XPS) on postoperative pain and analgesic intakes. Patients and Methods: A total of 159 molars diagnosed with symptomatic irreversible pulpitis were randomly divided into three study groups according to the instrumentation techniques: PTN (n = 54), SAF (n = 52), and XPS (n = 53). The preoperative pain scores were taken before the onset of treatment in the groups. After a single appointment for root canal treatment, the patients were asked to rate the level of their pain according to the Visual Analog Scale (VAS) of 100 mm at 6, 24, 48, and 72-hour post-treatment intervals. Ibuprofen was prescribed to be taken while experiencing pain; patients were requested to note the number of pills consumed at intervals after treatment. Results: The patients in SAF and XPS groups had lower mean VAS scores than the PTN group at 24-, 48-, and 72-hour intervals (p < 0.05). The most common analgesic intake was optimally seen in the PTN group at a 6-hour interval. All shaping procedures caused postoperative pain, whose intensity decreased with time. Conclusion: The SAF and XPS groups had a lesser intensity of pain as well as minimum analgesic intakes as compared to the PTN group. All instrumentation systems moderately caused pain, and the PTN group experienced the highest pain among others.

Incidence of Post-Operative Pain following a Single-Visit Pulpectomy in Primary Molars Employing Adaptive, Rotary, and Manual Instrumentation: A Randomized Clinical Trial.

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Pushout Bond Strength of Root Fillings after Irrigation of Root Canals Utilizing Sodium Hypochlorite, Chlorhexidine, and Homeopathic Mother Tincture (Arnica Montana).

The pushout bond strength of root fillings at radicular dentin was investigated employing NaOCl, CHX, and homoeopathic mother tincture (Arnica montana) as an irrigant. Sixty human permanent single-rooted extracted teeth were decoronated. The root canals were instrumented using Pro taper universal rotary system (Dentsply Tulsa Dental; Tulsa, Oklahoma) and were prepared up to F3 apical size. The roots were then randomly divided into three groups according to irrigation solution (n = 20) according to the final irrigation regimen: Group I: 3 mL 5.25% NaOCl followed by 3 mL Saline (control); Group II: 3 mL Arnica montana (10%, w/v) followed by 3 mL Saline; Group III: 3 mL CHX followed by 3 mL Saline. The canals were dried using paper points. The canals were coated with AH Plus sealer (Dentsply DeTey, Konstaz, Germany) with the aid of a Lentulo spiral (Dentsply DeTey, Konstaz, Germany) and obturated with #F3 gutta-percha. Each root was then horizontally sliced into three slices, labelled coronal, middle, and apical, each measuring 2 mm thick. Furthermore, at a crosshead speed of 2 mm/min, the test was carried out using the universal testing apparatus. The 5.25% NaOCl significantly decreased the bond strength of AH Plus to dentin. Both CHX and Arnica montana were capable of reversing the compromised pushout of AH Plus to NaOCl-treated dentin. After using NaOCl as an irrigant, the danger of diminished binding capacity of AH Plus to root canal walls arises. Final irrigation with Arnica montana and CHX reduces this risk.

Post-Operative Quality of Life after Single-Visit Root Canal Treatment Employing Three Different Instrumentation Techniques-An Institutional Randomized Clinical Trial.

Root canal treatment (RCT) eliminates damaged pulpal tissue and protects the tooth from recurrent microbial invasion. Post-endodontic pain (PEP) is a frequently encountered complication of root canal therapy. It can have an impact on patients' quality of life (QoL) and their subjective perception of treatment options. Thus, a self-assessment questionnaire was used to evaluate and compare the influence of manual, rotary, and reciprocating file shaping procedures on immediate post-operative quality of life (POQoL) involving single-visit root canal therapy. It was a double-blinded, randomized, controlled clinical trial. A total of 120 participants were randomly assigned sequentially to three groups comprising 40 patients in each group: Group A: Hand K file (positive control); Group B: ProTaper Next file system; and Group C: WaveOne Gold. Post-operative pain was evaluated using a 4-point visual analog scale (VAS) after 12 h, 24 h, 48 h, 72 h, and 1 week. The highest post-operative pain was with manual instrumentation using hand K files, and the lowest was with reciprocating and rotating instrumentations. No significant difference was noted between the parameters of quality of life assessed, suggesting the filing system or technique had a similar effect.

Severity of Post-Operative Pain after Instrumentation of Root Canals by XP-Endo and SAF Full Sequences Compared to Manual Instrumentation: A Randomized Clinical Trial.

This investigation aimed to examine the post-operative pain experienced following single-visit root canal treatment using the XP-endo shaper sequence (XPS), full-sequence self-adjusting file (SAF), and manual K-files (HKF). A randomized equivalence parallel design, double-blinded clinical study was conducted on 120 patients with symptomatic irreversible pulpitis, with or without clinical signs of apical periodontitis. Only teeth with fully formed roots and no periapical lesions were incorporated in the study. Patients were apportioned to one of three groups (n = 40) randomly: Group 1-XPS, Group 2-SAF, and Group 3-HKF. Pre- and post-instrumentation pain was rated utilizing Visual Analog Scale (VAS) with a spectrum of 0-100 mm. The descriptive statistics and one-way ANOVA with 95% confidence intervals were used for statistical analysis. The mean VAS scores before instrumentation were consistent in all three groups. At 6, 24, 48, and 72 h, patients with root canals instrumented by SAF had the lowest post-instrumentation mean VAS score, followed by XPS. For all time intervals, the patients in the HKF group had the highest VAS score. The full-sequence SAF instrumentation resulted in less post-operative pain than the XP-endo plus protocol, while manual instrumentation with K-files resulted in the highest post-operative pain.

Location angle of second mesio-buccal canal in maxillary molars of an Indian population: an in vivo retrospective CBCT evaluation and proposal of a new classification.

Background: The current investigation was designed for predicting the location angle of second mesio-buccal root canal in permanent maxillary (first and second) molars with the aid of proposed measuring points and line using cone beam computed tomography in an Indian population. Methods: Three-hundred and twenty-four scans of permanent maxillary (first (n = 162) and second (n = 162)) molars with mesio-buccal 2 root canals and unassociated to the current evaluation were acquired. The maxillary molars were viewed with CSI imaging software. The images were captured and were further assessed using 3D Slicer. The assessment included of measuring the distance between the main mesio-buccal and mesio-buccal 2 canal and the angle at which the MB2 it is located utilizing proposed lines joining the disto-buccal and palatal canals. The data was tabulated for the incidence of various angles where the MB2 is located and MB-MB2 distance was determined. The angles denoted were either positive; I (0.1° to 1.9°), II (2° to 4°), III (>4°) or negative I (-0.1° to -1.9°), II (-2° to -4°), III (>-4°). On the data tabulated a new Banga Vhorkate and Pawar's (BVP's) angular classification for maxillary molars was proposed. Results: The existence of positive angle III was found in 41.35% of maxillary first molars (36 right and 31 left of 162), whereas positive angle II appeared in 41.98% of maxillary second molars (32 right and 36 left of 162). The MB1-MB2 in maxillary 1st molar is seen to be 3.12-3.31 mm and this distance in maxillary 2nd molar is 2.8-3.1 mm. The disto-buccal to palatal canal orifice mean distance was 5.06-5.22 mm in maxillary first molars and 4.9-5.8 mm in maxillary second molars. Conclusion: Accurate diagnosis of the location of second mesio-buccal canal increases the success rate of endodontic treatment and a better prognosis. The new proposed classification may be considerably helpful in the urge to locate the mesio-buccal 2 canal.

A CBCT based cross sectional study on the prevalence and anatomical feature of C shaped molar among Jordanian.

The prevalence and anatomical features of C-Shaped Mandibular Second Molars (MSMs) are rarely studied in Jordanian sub-population. This study then took a part to evaluate the prevalence of C-shaped in MSMs using cone-beam computed tomography (CBCT) in the Jordanian sub-population. It used a cross-sectional design and three thousand scans collected over eight years between 2011 and 2019. The data were then reviewed for whether they were fully formed of MSMs. A total of 2037 cases that had 2845 MSMs were evaluated to identify C-shaped canals at coronal, middle, and apical sites. An oblique slicing module perpendicular to the long axis of MSMs was used to evaluate the teeth. The type and frequency of C-shaped canals, as well as the correlations between sex and side (right/left) and between sex and groove direction (buccal/lingual) were measured using the chi-square test on SPSS software at the significance level of 95%. A total of 342 teeth of 243 patients were C-shaped molars, which comprised 12% of the patient's teeth and 99 of them as a bilateral C-shaped canal with mean age of 40 years and sex ratio of 2:1 between female and male. With the limitations of this study, the lingual groove and type 3 were the most common properties of MSM. Besides, the Jordanian population mostly had C-shaped canals.

Evaluation of pulpal anesthesia and injection pain using IANB with pre-heated, buffered and conventional 2% lignocaine in teeth with symptomatic irreversible pulpitis-a randomized clinical study.

Background: The efficacy of 2% lignocaine is reduced in a hot tooth. Local aesthetic agents can be preheated and buffered to increase their effectiveness. The present investigation was carried out due to limited information concerning adult patients with symptomatic irreversible pulpitis in mandibular teeth. Methods: A total of 252 individuals were included in the clinical trial in accordance with the selection criteria only after clinical study was registered with the Clinical Trial Registry of India (CTRI/2020/09/027796). Scores on the visual analog scale (VAS) and electric pulp test (EPT) on a 1-10 scale were recorded prior to the commencement of therapy. In this double-blinded study, patients were randomly divided by a co-investigator using computer randomisation (www.randomizer.org) into three groups, group A: inferior alveolar nerve blocks (IANB) with 2% lignocaine preheated at 42 °C (injected at 37 °C) (N = 84), group B: IANB of 2% lignocaine buffered with 0.18 ml of 8.4% sodium bicarbonate (N = 80) and group C: 2% lignocaine (N = 88). Excluding the dropouts of individuals (n = 11), wherein the anaesthesia failed, a total of 241 people were finally assessed 15 minutes after profound anaesthesia, endodontic access, and intraoperative pain were quantified using VAS. Pain on injection for all three groups was recorded immediately after IANB with VAS. The analysis was performed using one way ANOVA with Tukey's post hoc test and Paired T-Test using SPSS version 21. Results: Preheated, Buffered, and conventional 2% lignocaine showed statistically significant reduction in intraoperative pain (P < 0.001) compared to pre-operative but on inter-group comparison preheated and buffered showed highly significant pain reduction compared with conventional 2% lignocaine (P < 0.001). Conclusions: Warm and buffered local anaesthetic (LA) were effective in reducing intraoperative discomfort than conventional LA. Preheated local anesthetics caused the least pain, followed by buffered local anesthetics, while conventional local anesthetics caused the most pain.