Visualization of the photodegradation of a therapeutic drug by chemometric-assisted fluorescence spectroscopy.

The fluorescence spectral fingerprint, also known as the excitation-emission matrix (EEM), is used to assess and visualize therapeutic drug photodegradation in combination with chemometrics. Examination of EEM-parallel factor analysis (PARAFAC) data showed that an individual component was easily separated from a mixture of photogenerated products of a heterocyclic pharmacophore, in this case, phenothiazine drugs (PTZs). Detailed investigations of both structure-EEM relationships and kinetics revealed that the components extracted from EEM-PARAFAC could be quantitatively attributed to such photogenerated products as phenothiazine sulfoxide and carbazole derivatives. EEM in combination with principal component analysis (PCA) could be used as a mapping tool to visualize information of the photodegradation process of PTZs. We also assessed the photostability of various types of PTZs containing side chains by using validated EEM-PARAFAC methodology.

Relationship of the Difficulty of Helicobacter pylori Eradication with Drinking Habits and Allergic Disease.

Eradication of Helicobacter pylori (H. pylori) is crucial to reduce the risk of developing gastric ulcers and gastric cancer. Although immunoglobulin E (IgE) levels and alcohol consumption have been shown to influence the failure of H. pylori eradication, the relationship between these factors and the mechanism of failure has not been clarified. Because high IgE levels are associated with eradication failure, the purpose of this study was to clarify the factors leading to high IgE levels. Completed questionnaires and blood test data were collected from patients who visited a university hospital for H. pylori eradication. Logistic regression analysis was per-formed to examine the relationship between high IgE levels and allergic diseases. We also examined the relationship between alcohol intake and high IgE levels. Linear regression analysis was performed on the relationship between the amount of alcohol consumed and IgE measurements. The results showed that patients with allergic diseases and those with high alcohol intake had significantly higher IgE levels. High IgE levels are a risk factor for failure of H. pylori eradication that is associated with drinking habits and alcohol consumption, and our results suggest that daily alcohol consumption should be avoided even in non-allergic patients.

Influence of technique used to attach the infusion set to peristaltic finger smart-pumps on dispensing time: an experimental study.

BACKGROUND: Infusion sets designed for peristaltic finger smart pumps (PFSPs) are necessary for the pumps' accurate handling. We previously found that medication dispensing is occasionally incomplete following the calculated infusion time when using certain combinations of PFSPs and infusion sets at a Japanese hospital. Thus, in this study, we investigated the cause of this observed delay by determining the effect of infusion set attachment technique on dispensing time using a combination of three kinds of PFSPs and five kinds of polyvinyl chloride (PVC) and polybutadiene (PB) infusion sets. METHODS: PFSPs with their exclusive infusion sets were used. The PVC and PB infusion sets were either not stretched or stretched to 1-3 cm and attached to the PFSP's liquid delivery system. PFSP dispensing rates were set at 25-400 mL/h. The primary outcome was the time required to dispense 100 mL of saline in a volumetric flask. RESULTS: The complete dispensing time correlated with the input time for all equipment combinations when the infusion sets were not stretched before attachment to the PFSP (R2 = 0.9998-1.0000). When stretched, the complete dispensing time was longer than the input time (P < 0.01-0.05, analysis of variance with Tukey-Kramer multiple comparisons). The maximum dispensing time extension ratio for the PVC and PB infusion sets was 141.8% and 113.0%, respectively. CONCLUSION: Certain attachment techniques for infusion sets can adversely prolong drug dispensing time. As such, pharmacists should provide medical staff with information about the devices used to administer drugs, as well as about the drugs themselves.

Factors Influencing the Accurate Administration of Peristaltic Finger Infusion Pumps Attached to Polyvinylchloride Infusion Sets Containing Tris(2-ethylhexyl) trimellitate.

An accurate continuous intravenous injection via a peristaltic finger infusion pump has been utilized at outpatient clinics recently. An infusion element designed for this pump is necessary for the accurate handling of the pump, and for proper use of this equipment, we need accurate information. Our experiments have shown that medication administration has occasionally been incomplete at the calculated input time when a peristaltic finger infusion pump has been used. In this paper, we have investigated the cause of the delay in the administration time and the effect of the attachment procedure using a combination of features from three kinds of such infusion pumps and five kinds of exclusive polyvinyl chloride (PVC) infusion sets, under various conditions. Our results suggest that the time required for complete administration was correlated to the input time when five kinds of PVC tubing without stretching were attached to three kinds of peristaltic finger infusion pumps (R(2)=0.9998-1.0000). However, when the PVC tubing was stretched 1-3 cm and was attached to the pump, the time required for complete administration of the solution was prolonged compared to the recommended listed input time (p<0.01-0.05, ANOVA, Tukey-Kramer multiple comparison). Therefore, we suggest that the procedure technique used by the medical staff and involving the infusion pump adversely prolonged the time required for completion of the administration of medication. In our opinion, pharmacists must provide information concerning not only the drugs, but also the medical devices used to the physicians and nurses.

Effects of outside air temperature on the preparation of antineoplastic drug solutions in biological safety cabinets.

PURPOSE: In Japan, biological safety cabinets are commonly used by medical staff to prepare antineoplastic agents. At the Division of Chemotherapy for Outpatients, Nagoya University Hospital, a class II B2 biological safety cabinet is used. The temperature inside this biological safety cabinet decreases in winter. In this study, we investigated the effect of low outside air temperature on the biological safety cabinet temperature, time required to admix antineoplastic agents, and accuracy of epirubicin weight measurement. METHODS: Studies were conducted from 1 January to 31 March 2008 (winter). The outside air temperature near the biological safety cabinet intake nozzle was compared with the biological safety cabinet temperature. The correlation between the outside air temperature and the biological safety cabinet temperature, time for cyclophosphamide and gemcitabine solubilization, and accuracy of epirubicin weight measurement were investigated at low and high biological safety cabinet temperatures. RESULT: The biological safety cabinet temperature correlated with the outside air temperature of 5-20℃ (p < 0.0001). Compared to cyclophosphamide and gemcitabine solubilization in the biological safety cabinet at 25℃, solubilization at 10℃ was significantly delayed (p < 0.01 and p < 0.0001, respectively). Measurement of epirubicin weight by using a syringe lacked accuracy because of epirubicin's high viscosity at low temperatures (p < 0.01). CONCLUSION: These results suggest that the biological safety cabinet temperature decreases when cool winter air is drawn into the biological safety cabinet, affecting the solubilization of antineoplastic agents. We suggest that a decrease in biological safety cabinet temperature may increase the time required to admix antineoplastic agents, thereby increasing the time for which outpatients must wait for chemotherapy.

Effects of open-air temperature on air temperature inside biological safety cabinet.

OBJECTIVE: In Japan, biological safety cabinets (BSCs) are normally used by medical staff while handling antineoplastic agents. We have also set up a class II B2 BSC at the Division of Chemotherapy for Outpatients. The air temperature inside this BSC, however, decreases in winter. We assumed that this decrease is caused by the intake of open-air. Therefore, we investigated the effects of low open-air temperature on the BSC temperature and the time of admixtures of antineoplastic agents. METHODS: The studies were conducted from January 1 to March 31, 2008. The outdoor air temperature was measured in the shade near the intake nozzle of the BSC and was compared with the BSC temperature. The correlation between the outdoor air temperature and the BSC temperature, the dissolution time of cyclophosphamide (CPA) and gemcitabine (GEM), and accurate weight measurement of epirubicin (EPI) solution were investigated for low and normal BSC temperatures. RESULT: The BSC temperature was correlated with the open-air temperature for open-air temperatures of 5-20°C (p < 0.0001). The dissolution of CPA and GEM at these temperatures was significantly delayed as compared to that at 25°C (p < 0.01 and p < 0.0001, respectively). The weight measurement of EPI solution using a syringe method lacks accuracy because of its high coefficient of viscosity at low temperatures (p < 0.01). CONCLUSION: These results suggest that the BSC temperature decreases below room temperature in winter when air is drawn from outdoors. We showed that the BSC temperature affects the dissolution rate of antineoplastic agents. Further, we suggested that the BSC temperature drop might delay the affair of the admixtures of antineoplastic agents and increase the waiting time of outpatients for chemotherapy.

Variability in teicoplanin protein binding and its prediction using serum albumin concentrations.

The impact of lower serum albumin levels on teicoplanin pharmacokinetics has not been previously determined. The authors assessed the relationship between total and free concentrations of teicoplanin in serum samples obtained from patients receiving teicoplanin therapy for Gram-positive bacterial infections. In addition, the authors determined the contribution of serum albumin concentrations to the unbound fraction of teicoplanin. One hundred ninety-eight serum samples were obtained from 65 patients undergoing routine therapeutic drug monitoring of teicoplanin. Free serum teicoplanin was separated by ultrafiltration, and total and free serum concentrations of teicoplanin were determined by a fluorescence polarization immunoassay. Regression analysis was then performed to build a prediction model for the free serum teicoplanin concentration from the total serum teicoplanin concentration and the serum albumin level using the first 132 samples. The predictive performance of this model was then tested using the next 66 samples. Free serum teicoplanin concentrations (Cf) (mug/mL) were predicted using a simple model constructed using total serum teicoplanin (Ct) (mug/mL) and albumin concentrations (ALB) (g/dL): Cf = Ct/(1 + 1.78 * ALB). This model could estimate free serum teicoplanin concentrations with a small bias and an acceptable error. The measured free level of teicoplanin will lie between 0.63 and 1.38 times the predicted concentration in 95% of cases. Serum albumin level plays a major role in the variability of the fraction unbound of teicoplanin. This model can reliably estimate free serum teicoplanin concentrations more easily than by using direct measurements.