Regulating Photochemical Selectivity with Temperature: Isobutanol on TiO2(110).

Selective photocatalytic transformations of chemicals derived from biomass, such as isobutanol, have been long envisioned for a sustainable chemical production. A strong temperature dependence in the reaction selectivity is found for isobutanol photo-oxidation on rutile TiO2(110). The strong temperature dependence is attributed to competition between thermal desorption of the primary photoproduct and secondary photochemical steps. The aldehyde, isobutanal, is the primary photoproduct of isobutanol. At room temperature, isobutanal is obtained selectively from photo-oxidation because of rapid thermal desorption. In contrast, secondary photo-oxidation of isobutanal to propane dominates at lower temperature (240 K) due to the persistence of isobutanal on the surface after it is formed. The byproduct of isobutanal photo-oxidation is CO, which is evolved at higher temperature as a consequence of thermal decomposition of an intermediate, such as formate. The photo-oxidation to isobutanal proceeds after thermally induced isobutoxy formation. These results have strong implications for controlling the selectivity of photochemical processes more generally, in that, selectivity is governed by competition of desorption vs secondary photoreaction of products. This competition can be exploited to design photocatalytic processes to favor specific chemical transformations of organic molecules.

Dual Lewis site creation for activation of methanol on Fe3O4(111) thin films.

Despite a wide application in heterogeneous catalysis, the surface termination of Fe3O4(111) remains controversial. Herein, a surface with both Lewis acid and base sites is created through formation of an Fe3O4(111) film on α-Fe2O3(0001). The dual functionality is generated from a locally nonuniform surface layer of O adatoms and Fetet1 sites. This reactive layer is reproducibly formed even in oxygen-free environments because of the high mobility of ions in the underlying α-Fe2O3(0001). The atomic structure of the Fe3O4(111) surface was identified by scanning tunneling microscopy (STM) and density functional theory (DFT) using the registry of the overlayers with the surface and the distinct electronic structure of oxygen adatom (Oad) and uncovered lattice Fetet1. The surface is dominated by the interface of Oad and Fetet1, a Lewis acid-base pair, which favors methanol dissociation at room temperature to form methoxy. Methoxy is further oxidized to yield formaldehyde at 700 K in temperature programmed reaction spectra, corresponding to an approximate activation barrier of 179 kJ mol-1. The surface termination of Fe3O4(111) is fully recovered by rapid heating to 720 K in vacuum, demonstrating the high mobility of ions in this material. The work establishes a clear fundamental understanding of a unique magnetite surface and provides insights into the origin of selective oxidation of alcohols on magnetite-terminated catalysts.

Reactions in the Photocatalytic Conversion of Tertiary Alcohols on Rutile TiO2 (110).

According to textbooks, tertiary alcohols are inert towards oxidation. The photocatalysis of tertiary alcohols under highly defined vacuum conditions on a titania single crystal reveals unexpected and new reactions, which can be described as disproportionation into an alkane and the respective ketone. In contrast to primary and secondary alcohols, in tertiary alcohols the absence of an α-H leads to a C-C-bond cleavage instead of the common abstraction of hydrogen. Surprisingly, bonds to methyl groups are not cleaved when the alcohol exhibits longer alkyl chains in the α-position to the hydroxyl group. The presence of platinum loadings not only increases the reaction rate but also opens up a new reaction channel: the formation of molecular hydrogen and a long-chain alkane resulting from recombination of two alkyl moieties. This work demonstrates that new synthetic routes may become possible by introducing photocatalytic reaction steps in which the co-catalysts may also play a decisive role.

Introducing catalysis in photocatalysis: What can be understood from surface science studies of alcohol photoreforming on TiO2.

Mechanisms in heterogeneous photocatalysis have traditionally been interpreted by the band-structure model and analogously to electrochemistry. This has led to the establishment of 'band-engineering' as a leading principle for the discovery of more efficient photocatalysts. In such a picture, mainly thermodynamic aspects are taken into account, while kinetics are often ignored. This holds in particular for chemical kinetics, which are, other than those for charge carrier dynamics, often not at all considered for the interpretation of the catalysts' photocatalytic performance. However, while being usually neglected in photocatalyis, they are a traditional and powerful tool in thermal catalysis and are still applied with great success in this field. While surface science studies made substantial contributes to thermal catalysis, analogous studies in heterogeneous photocatalysis still play only a minor role. In this review, the authors show that the photo-physics of defined materials in well-defined environments can be correlated with photochemical events on a surface, highlighting the importance of well-characterized semiconductors for the interpretation of mechanisms in heterogeneous photochemistry. The work focuses on contributions from surface science, which were obtained for the model system of a titania single crystal and alcohol photo-reforming. It is demonstrated that only surface science studies have so far enabled the elucidation of molecularly precise reaction mechanisms, the determination of reaction intermediates and assignment of reactive sites. As the identification of these properties remain major prerequisites for a breakthrough in photocatalysis research, the work also discusses the implications of the findings for applied systems. In general, the results from surface science demonstrate that photocatalytic systems shall also be approached by a perspective originating from heterogeneous catalysis rather than solely from an electrochemical point of view.

Why co-catalyst-loaded rutile facilitates photocatalytic hydrogen evolution.

As the conduction band edge of rutile is close to the reduction potential of hydrogen, there is a long-lasting discussion on whether molecular hydrogen can be evolved from this semiconductor. Our study on methanol photoreforming in the ultra-high vacuum reveals that photocatalysts comprising a TiO2(110) single crystal decorated with platinum clusters indeed enable the evolution of H2. This is attributed to a new type of mechanism, in which the co-catalyst acts as a recombination center for hydrogen and not as a reduction site of a photoreaction. This mechanism is an alternative pathway to the commonly used mechanism derived from photoelectrochemistry and must particularly be considered for systems, in which reducible semiconductors enable the surface diffusion of hydrogen species.

Photocatalytic selectivity switch to C-C scission: α-methyl ejection of tert-butanol on TiO2(110).

The thermal and photochemical mechanistic pathways for tertiary alcohols on the rutile TiO2(110)-surface are studied with the example of tert-butanol. While the thermal reaction is known to yield isobutene, the photochemical ejection of a methyl radical is observed at 100 K. The C-C scission, which is accompanied by the formation of acetone, is the only photochemical reaction pathway at this temperature and can be attributed to the reaction of photoholes that are created upon UV-light illumination at the surface of the n-type semiconductor. At 293 K the selectivity of the reaction changes, as isobutene is additionally formed photochemically. A comparison of the kinetics of the different reactions reveals further insights. Together with the quantitative evaluation of the reaction products at low temperatures and the comparison of the reaction pathways at different temperatures it is demonstrated how thermal effects can influence the selectivity of the reactions in photocatalysis.

Ethanol surface chemistry on MBE-grown GaN(0001), GaOx/GaN(0001), and Ga2O3(2¯01).

In this work, ethanol is used as a chemical probe to study the passivation of molecular beam epitaxy-grown GaN(0001) by surface oxidation. With a high degree of oxidation, no reaction from ethanol to acetaldehyde in temperature-programmed desorption experiments is observed. The acetaldehyde formation is attributed to a mechanism based on α-H abstraction from the dissociatively bound alcohol molecule. The reactivity is related to negatively charged surface states, which are removed upon oxidation of the GaN(0001) surface. This is compared with the Ga2O3(2¯01) single crystal surface, which is found to be inert for the acetaldehyde production. These results offer a toolbox to explore the surface chemistry of nitrides and oxynitrides on an atomic scale and relate their intrinsic activity to systems under ambient atmosphere.

Isomer-Selective Detection of Aromatic Molecules in Temperature-Programmed Desorption for Model Catalysis.

Based on three different molecules dosed on a Pt(111) single crystal the selectivity and sensitivity of REMPI-TPD in UHV is investigated for a potential application in heterogeneous catalysis. It is shown that the two structural isomers ethylbenzene and p-xylene can be discriminated by REMPI in a standard TPD experiment. The latter is not possible for the ionization with electrons in a Q-MS. It is further demonstrated by benzene TPD studies that the sensitivity of the REMPI-TOF-MS is comparable to commercial EI-Q-MS solutions and enables the detection of less than 0.6% molecules of a monolayer.

Ethanol photocatalysis on rutile TiO2(110): the role of defects and water.

In this work we present a stoichiometric reaction mechanism for the photocatalytic ethanol oxidation on TiO2(110). The reaction products are analyzed either under reaction conditions or after irradiation at lower temperatures. Water is identified as a quantitative by-product, which resides in a defect site. These water molecules cause a blocking of the defect sites which results in poisoning of the catalyst. By different preparation techniques of the TiO2(110) surface, the role of surface defects is further elucidated and the role of molecular oxygen is investigated. Based on the investigation, a complete photochemical reaction mechanism is given, which provides insights into general photon driven oxidation mechanisms on TiO2.

Plasmons in supported size-selected silver nanoclusters.

The plasmonic behavior of size-selected supported silver clusters is studied by surface second harmonic generation spectroscopy for the first time. A blue shift of ∼0.2 eV in the plasmon resonance is observed with decreasing cluster size from Ag55 to Ag9. In addition to the general blue shift, a nonscalable size-dependence is also observed in plasmonic behavior of Ag nanoclusters, which is attributed to varying structural properties of the clusters. The results are in quantitative agreement with a hybrid theoretical model based on Mie theory and the existing DFT calculations.