Safety and efficacy of second-generation all-suture anchors in labral tear arthroscopic repairs: prospective, multicenter, 1-year follow-up study.

Background: This study's primary aim was to assess the safety and performance of second-generation all-soft suture anchors following arthroscopic labral tear repair. Methods: This prospective, multicenter study was conducted by 6 surgeons at 6 sites in Europe and the United States between November 2018 and August 2020. Patients who required shoulder arthroscopic repair, for a range of labral injuries, were treated with a second-generation all-soft suture anchor. The primary outcome was clinical success rate (percentage of patients without signs of failure and/or reintervention) at 6 months. Secondary outcomes included clinical success rate at 12 months, intraoperative anchor deployment success rate, and patient-reported outcomes (PROs) at 6 and 12 months, including visual analog scale (VAS) pain assessment, VAS satisfaction assessment, EQ-5D-5L Index Score, EQ-5D-5L VAS Health Score, Rowe Shoulder Score for Instability, American Shoulder and Elbow Surgeons score, and Constant-Murley Shoulder Score. Serious adverse events and serious adverse device effects were collected throughout the study. Results: Forty-one patients were enrolled (mean age, 28.2 years; 87.8% male, 12.2% female). Clinical success was achieved in 27/28 and 31/32 patients at 6 months and 12 months, respectively. Anchor deployment had a 100% success rate. Significant improvements over baseline were reported for all PROs except Constant-Murley Shoulder (6 months) and VAS Satisfaction Score (12 months). One patient experienced 1 serious adverse event and 1 patient experienced 1 serious adverse device effect. Conclusion: Second-generation all-soft suture anchors used in this study demonstrated a high clinical success rate, a favorable safety profile, and patients exhibited significant improvement in PROs.

The 'Cruciform Test': A diagnostic tool to detect pectoralis major rupture.

Introduction: Pectoralis major (PM) rupture is a severe injury that untreated can lead to a profound functional deficit. Early surgical repair can greatly improve outcomes and give a more predictable timetable for recovery, making this the goal of current treatment. Surgical intervention is also essential to return professional athletes to their previous level of competition. However, there is no single, reliable and easily reproducible test that can be used to establish the diagnosis. We describe 'The Cruciform Test'; a method of identifying PM rupture that can be used for initial diagnosis either in clinic or a pitch-side environment, or to assess restoration of normal anatomy and function post-operatively. Methods: We studied a series of 14 patients who underwent open PM repair in order to evaluate this method of assessment. Results: All patients had a positive test pre-operatively. 5 were formally tested at post-operative follow-up and all had a negative result. Discussion: The Cruciform Test is a simple and reproducible diagnostic tool that has potential as a clinical indicator of both PM rupture and successful repair. It can therefore contribute to earlier diagnosis, prompt surgical intervention and facilitate return to play at the earliest opportunity.

Arthroscopic Tenotomy of the Long Head of the Biceps Tendon and Section of the Anterior Joint Capsule Produce Moderate Osteoarthritic Changes in an Experimental Sheep Model.

Osteoarthritis (OA) of the glenohumeral (GH) joint is a common cause of shoulder pain, resulting in considerable invalidity. Unfortunately, the study of its pathogenesis is challenging. Models of OA are necessary to identify specific targets for therapy and to be able to interfere with the development and evolution of OA. This study aims to assess the effect of an arthroscopic tenotomy of the long head of the biceps tendon (LHBT) and section of the anterior glenohumeral joint capsule on the ovine glenohumeral joint. In addition, the authors aim to validate and evaluate the reliability of a modified semi-quantitative MRI score to assess joint degeneration in a sheep's shoulder. Eight skeletally mature sheep received an arthroscopic tenotomy of the LHBT and section of the anterior joint capsule and were euthanized four months after surgery. All animals tolerated the surgery well, and no complication was recorded for six weeks. Moderate degenerative changes to the ovine shoulder joint were found on MRI and histological evaluation. The arthroscopic tenotomy of the LHBT and the anterior glenohumeral joint capsule section caused moderate degenerative changes to the ovine shoulder joint.

Faithful but unfortunate: Churchill and his shoulder.

The centenary of the end of the First World War allows an opportunity to reflect on the lessons learned from dissent, not only in political life but also in shoulder surgery. It is not commonly known that the young Winston Churchill had an unstable shoulder that was to affect him from his younger days into his later career. Although he chose to treat his shoulder problem conservatively, one of his contemporaries, ASB Bankart proposed a surgical approach that has come to be the 'gold standard' of management of the unstable shoulder. This paper reviews the historical record of Churchill's shoulder instability and the lessons he learned from his experience.

Arthroscopic Bankart repair with remplissage for non-engaging Hill-Sachs lesion in professional collision athletes.

BACKGROUND: The present study aimed to determine whether arthroscopic remplissage with Bankart repair is an effective treatment for improving outcomes for collision athletes with Bankart and non-engaging Hill-Sachs lesions. METHODS: Twenty collision athletes underwent arthroscopic Bankart repair with posterior capsulotenodesis (B&R group) and were evaluated retrospectively, using pre- and postoperative WOSI (Western Ontario Shoulder Instability), EQ-5D (EuroQOL five dimensions), EQ-VAS (EuroQol-visual analogue scale) scores and Subjective Shoulder Value (SSV). The recurrence and re-operation rates were compared to a matched group with isolated arthroscopic Bankart repair (B group). RESULTS: The mean age was 25 years with an mean follow-up of 26 months. All mean scores improved with SSV of 90%. There was a mean deficit in external rotation at the side of 10°. One patient was treated with hydrodilatation for frozen shoulder. One patient had residual posterior discomfort but no apprehension in the B&R group compared to 5% persistent apprehension in the B group. In comparison, the recurrence and re-operation rates were 5% and 30% (p = 0.015), 5% and 35% (p = 0.005) in the B&R and B groups, respectively. CONCLUSIONS: This combined technique demonstrated good outcomes, with lower recurrence rates in high-risk collision athletes. The slight restriction in external rotation does not significantly affect any clinical outcomes and return to play.

The "flying swan" technique: a novel method for anterior labral repair using a tensioned suture bridge.

Arthroscopic labral repair is an effective technique for most cases of traumatic shoulder instability. However, patients with anterior labroligamentous periosteal sleeve avulsion lesions frequently have multiple episodes of subluxation or dislocation and a high recurrence rate after surgery, even with modern methods of labral repair. One reason may be failure of biological healing of the labrum due to an inadequate "footprint" of contact between the capsulolabral tissue and the glenoid bone. We have developed a technique that facilitates a tensioned suture bridge between suture anchors that may improve the results of labral repair in patients with anterior labroligamentous periosteal sleeve avulsion lesions.

The effect of humeral avulsion of the glenohumeral ligaments and humeral repair site on joint laxity: a biomechanical study.

PURPOSE: The aims of this cadaveric study were to assess the effect of different sizes of humeral avulsion of the glenohumeral ligament (HAGL) lesions on joint laxity and to investigate any difference between repairs with anchors placed in a juxtachondral position and repairs with anchors placed in the humeral neck. METHODS: Glenohumeral specimens were tested on a shoulder laxity testing system with translations applied anteriorly up to 30 N, with the joint in 60° of glenohumeral abduction. Testing was conducted in neutral rotation and under 1-Nm external rotation for 5 specimen states: intact, medium HAGL lesion (4:30 to 5:30 clock-face position), large HAGL lesion (3:30 to 6:30 clock-face position), repair with juxtachondral suture anchors, and repair with humeral neck suture anchors. RESULTS: Significant increases in translation were observed between the intact and large HAGL lesion states for neutral rotation (1.46 mm [SD, 2.33 mm] at 30 N; P = .049) and external rotation (0.81 mm [SD, 0.72 mm] at 30 N; P = .005). Significant reductions in translation were also observed between the large HAGL lesion and humeral neck repair states for neutral rotation (-1.78 mm [SD, 2.23 mm] at 30 N; P = .022) and external rotation (-0.33 mm [SD, 0.37 mm] at 30 N; P = .015). CONCLUSIONS: Large HAGL lesions can increase the passive motion of the glenohumeral joint in both neutral and external rotation, although these differences are small and may be difficult to measure clinically. A repair using anchors placed in the humeral neck is more likely to restore the normal restraint to anterior translation than a juxtachondral repair. CLINICAL RELEVANCE: Medium HAGL lesions are unlikely to show significant increases in joint translation, and repair of large HAGL lesions should be achieved with anchors placed in the humeral neck if possible.

The role of negative intraarticular pressure and the long head of biceps tendon on passive stability of the glenohumeral joint.

BACKGROUND: The purpose of this study was to determine the effect of intraarticular pressure and the long head of biceps (LHB) tendon on passive translations of the glenohumeral (GH) joint. Tenotomy or tenodesis of the LHB are common procedures but the consequences on shoulder stability are unclear. METHODS: A novel shoulder laxity testing rig permitting six degrees of freedom of motion was used to test passive translations in anterior, posterior, superior, and inferior directions in 10 cadaveric shoulders. Specimens were tested in neutral rotation with 0°, 30°, 60°, or 90° of GH abduction in the scapular plane. Translation loads up to 30N were applied, and displacements measured in an intact joint, vented joint and with the biceps tendon loaded (20N). RESULTS: The GH joint was most lax at 30° GH abduction. Venting of the joint increased translations in all positions and directions (mean ± standard error of the mean), the greatest difference was 12.5 (3.9) mm in the anterior-posterior direction and 7.5 (3.9) mm in the SI direction. Loading the LHB tendon with 20N decreased translations in all directions. The largest difference was observed in the anterior direction, 13.9 (2.8) mm (P < .0005) and inferior direction, 12.0 (2.8) mm (P < .0005). CONCLUSION: Negative intraarticular pressure and the LHB contribute significantly to overall passive stability of the GH joint. Surgical division or transfer of the LHB tendon may impact on joint stability and function.

Biological resurfacing for early osteoarthritis of the shoulder.

Young patients with degenerative shoulder disease are a therapeutic challenge. To try to delay a shoulder arthroplasty, biological interpositional arthroplasty has been proposed to provide a biologically active bearing surface that could eventually results in the formation of fibrocartilage, fibrous tissue, or hyaline cartilage. Anterior capsule, autogenous fascia lata, Achilles tendon allograft, lateral meniscus allograft, human dermis, and porcine small intestine submucosa have been used as interposition material, either alone or in combination with a hemiarthroplasty or humeral resurfacing procedure. Some investigators have reported favorable long-term results, although others have found this procedure unreliable. Several variables are unknown at present, such as the best biological resurfacing device, healing potential, possible antigenic responses, optimal fixation technique or position, aftercare restrictions. Further prospective studies with long follow-up are necessary to provide data that will help to define the role of biological glenoid resurfacing in young patients with glenohumeral arthritis.

The compressive behavior of the human glenoid labrum may explain the common patterns of SLAP lesions.

PURPOSE: The aim of the study was to define the normalized compressive stiffness (modulus) of the glenoid labrum around its circumference and to characterize the difference in modulus between different areas. METHODS: Sixteen fresh-frozen cadaveric shoulders were harvested and dissected down to the glenoid labrum. Any specimens with significant degenerative changes were discarded, leaving 8 labra for testing. The labrum was divided into 8 segments, to allow comparison around its circumference. A uniform testing specimen was produced from each area by use of a microtome. Each specimen measured 3 x 1 mm in cross section and was 6 mm in length. Indentation testing was conducted in a controlled environment of 100% humidity at 37 degrees C +/- 1 degrees C. RESULTS: We obtained 52 test samples from 8 labra. The mean modulus of the glenoid labrum was 69.7 megapascal (standard deviation, 36.2 megapascal). The anterosuperior portion of the labrum had a higher modulus than the posteroinferior portion (P = .0075). CONCLUSIONS: This study has shown that the human glenoid labrum's compressive behavior varies around its circumference. The greater modulus of the anterosuperior portion of the labrum supports the theory that this area is anatomically different from the rest of the labrum and resists compressive loads. CLINICAL RELEVANCE: These results may explain why the common type of SLAP lesions seen show failure at the interface between the labrum and the glenoid rather than within the substance of the labrum itself.

Glenoid rim fracture in contact athletes with absorbable suture anchor reconstruction.

Absorbable suture anchors are widely used in arthroscopic shoulder reconstruction procedures and provide a good solution for stabilization in athletes. In our practice we identified a group of 3 patients who had participated in contact sports and in whom traumatic instability developed. Subluxation of the shoulder followed repair by use of absorbable suture anchors. Each patient had a new injury characterized by a glenoid rim fracture that was not amenable to further arthroscopic reconstruction and was revised by use of a modified Latarjet procedure. All patients successfully returned to contact sports. We conclude that resorption defects resulting from the use of absorbable anchors contribute to an increased risk of rim fracture.

The range of axial rotation of the glenohumeral joint.

There is a paucity of data in the literature on the restraining effects of the glenohumeral (GH) ligaments; cadaveric testing is one of the best methods for determining the function of these types of tissues. The aim of this work was to commission a custom-made six degrees of freedom (dof) joint loading apparatus and to establish a protocol for laxity testing of cadaveric shoulder specimens. Nine cadaveric shoulder specimens were used in this study and each specimen had all muscle resected leaving the scapula, humerus (transected at mid-shaft) and GH capsule. Specimens were mounted on the testing apparatus with the joint in the neutral position and at 30 degrees, 60 degrees and 90 degrees GH abduction in the coronal, scapula and 30 degrees forward flexion planes. For each orientation, 0-1 N m in 0.1 N m increments was applied in internal/external rotation and the angular displacement recorded. The toe-region of the moment-displacement curves ended at approximately +/-0.5 N m. The highest rotational range of motion for the joint was 140 degrees for +/-1.0 N m at 30 degrees GH abduction in the scapula plane. The range of motion shifted towards external rotation with increasing levels of abduction. The results provide the optimum loading regime to pre-condition shoulder specimens and minimise viscoelastic effects in the ligaments prior to laxity testing (>0.5 N m at 30 degrees GH abduction in any of the three planes). Knowledge of the mechanical properties of the GH capsuloligamentous complex has implications for modelling of the shoulder as well surgical planning and intervention.

A scapular coordinate frame for clinical and kinematic analyses.

The aim of this study was to define a body-fixed coordinate frame for the scapula that minimises axes variability and is closely related to the clinical frame of reference. Medical images of 21 scapulae were used to quantify 14 different axes from identifiable landmarks. The plane of the blade of the scapula was defined. The orientations of the quantified axes were calculated. The angular relationships between axes were quantified and applied to grade the sensitivity of each axis to inter-scapular variations in the others. The volume of data required to define an axis was noted for its dependency on pathology and the three criteria were weighted according to relative importance. The two axes with the highest weighting were applied to define a body-fixed Cartesian coordinate frame for the scapula. A least square medio-lateral line through the centre of the spine root was the most optimal axis. The plane formed by the spine root line and a least square line through the centre of the lateral border ridge was the most optimal scapular plane. This body-fixed Cartesian coordinate frame is closely aligned to the cardinal planes in the anatomical position and thus is a clinically applicable, specimen invariant coordinate frame that can be used in patient-specific kinematics modelling.

An optimised method for quantifying glenoid orientation.

A robust quantification method is essential for inter-subject glenoid comparison and planning of total shoulder arthroplasty. This study compared various scapular and glenoid axes with each other in order to optimally define the most appropriate method of quantifying glenoid version and inclination.Six glenoid and eight scapular axes were defined and quantified from identifiable landmarks of twenty-one scapular image scans. Pathology independency and insensitivity of each axis to inter-subject morphological variation within its region was tested. Glenoid version and inclination were calculated using the best axes from the two regions.The best glenoid axis was the normal to a least-square plane fit on the glenoid rim, directed approximately medio-laterally. The best scapular axis was the normal to a plane formed by the spine root and lateral border ridge. Glenoid inclination was 15.7 degrees +/- 5.1 degrees superiorly and version was 4.9 degrees +/- 6.1 degrees , retroversion.The choice of axes in the present technique makes it insensitive to pathology and scapular morphological variabilities. Its application would effectively improve inter-subject glenoid version comparison, surgical planning and design of prostheses for shoulder arthroplasty.

An optimised method for quantifying glenoid orientation

A robust quantification method is essential for inter-subject glenoid comparison and planning of total shoulder arthroplasty. This study compared various scapular and glenoid axes with each other in order to optimally define the most appropriate method of quantifying glenoid version and inclination. Six glenoid and eight scapular axes were defined and quantified from identifiable landmarks of twenty-one scapular image scans. Pathology independency and insensitivity of each axis to inter-subject morphological variation within its region was tested. Glenoid version and inclination were calculated using the best axes from the two regions. The best glenoid axis was the normal to a least-square plane fit on the glenoid rim, directed approximately medio-laterally. The best scapular axis was the normal to a plane formed by the spine root and lateral border ridge. Glenoid inclination was 15.7° ± 5.1° superiorly and version was 4.9° ± 6.1°, retroversion. The choice of axes in the present technique makes it insensitive to pathology and scapular morphological variabilities. Its application would effectively improve inter-subject glenoid version comparison, surgical planning and design of prostheses for shoulder arthroplasty

Arthroscopic rotator cuff repair with double-row fixation.

BACKGROUND: The treatment of rotator cuff tears has evolved from open surgical repairs to complete arthroscopic repairs over the past two decades. In this study, we reviewed the results of arthroscopic rotator cuff repairs with the so-called double-row, or footprint, reconstruction technique. METHODS: Between 1998 and 2002, 264 patients underwent an arthroscopic rotator cuff repair with double-row fixation. The average age at the time of the operation was fifty-nine years. Two hundred and thirty-eight patients (242 shoulders) were available for follow-up; 210 were evaluated with a full clinical examination and thirty-two, with a questionnaire only. Preoperative and postoperative examinations consisted of determination of a Constant score and a visual analogue score for pain as well as a full physical examination of the shoulder. Ultrasonography was done at a minimum of twelve months postoperatively to assess the integrity of the cuff. RESULTS: The average score for pain improved from 7.4 points (range, 3 to 10 points) preoperatively to 0.7 point (range, 0 to 3 points) postoperatively. The subjective outcome was excellent or good in 220 (90.9%) of the 242 shoulders. The average increase in the Constant score after the operation was 25.4 points (range, 0 to 57 points). Ultrasonography demonstrated an intact rotator cuff in 83% (174) of the shoulders overall, 47% (fifteen) of the thirty-two with a repair of a massive tear, 78% (thirty-two) of the forty-one with a repair of a large tear, 93% (113) of the 121 with a repair of a medium tear, and 88% (fourteen) of the sixteen with a repair of a small tear. Strength and active elevation increased significantly more in the group with an intact repair at the time of follow-up than in the group with a failed repair; however, there was no difference in the pain scores. CONCLUSIONS: Arthroscopic rotator cuff repair with double-row fixation can achieve a high percentage of excellent subjective and objective results. Integrity of the repair can be expected in the majority of shoulders treated for a large, medium, or small tear, and the strength and range of motion provided by an intact repair are significantly better than those following a failed repair. LEVEL OF EVIDENCE: Therapeutic Level IV.

Tendons and ligaments are anatomically distinct but overlap in molecular and morphological features--a comparative study in an ovine model.

Tendons and ligaments are similar in composition but differ in function. Simple anatomical definitions do not reflect the fact individual tendons and ligaments have unique properties due to their adaptation to a specific role. The patellar tendon is a structure of particular clinical interest. A null hypothesis was declared stating that the patellar tendon is not significantly different in terms of matrix composition and collagen fibril diameter to other tendons. The lateral and medial collateral ligaments (LCL, MCL), anterior and posterior cruciate ligaments (ACL, PCL), together with the long digital extensor, superficial digital extensor, and patellar tendons (LDET, SDFT, PT) were harvested from three cadaveric ovine hindlimbs. The extracellular matrix was assessed in terms of water, collagen, and total sulphated glycosaminoglycan (GAG) content. The organization of the collagen component was determined by an ultrastructural analysis of collagen fibril diameter distributions, together with values for the collagen fibril index (CFI) and mass-average diameter (MAD). There were significant differences between ligaments and tendons. The PT had a bimodal collagen fibril diameter distribution with CFI 72.9%, MAD 202 nm, water content 53.1%, GAG content 2.3 microg/mg, and collagen content 73.7%, which was not significantly different from the other tendons. The results of this study support the null hypothesis suggesting that the patellar tendon is similar to other tendons and demonstrate that tendons have different characteristics to ligaments.

Treatment of ligament laxity by electrothermal shrinkage or surgical plication: a morphologic and mechanical comparison.

Capsular plication or thermal shrinkage can be used to enhance surgical joint stabilization. We compared mechanical or morphologic properties of the medial collateral ligament of the rabbit knee treated by either bipolar radiofrequency electrothermal shrinkage or surgical plication. After 12 weeks, the medial collateral ligaments were procured from treated and contralateral knees to undergo viscoelastic (creep) testing, quantitative transmission electron microscopy, and immunohistochemistry. Creep strain in thermal (1.85% +/- 0.32%) and plicated (1.92% +/- 0.36%) ligaments was almost twice that of the control group (1.04% +/- 0.15%), although there was no difference between treatment modalities. The morphologic parameters of all 3 groups were significantly different (P < .001). The thermal ligaments demonstrated predominantly small fibrils, whereas the plicated group displayed an intermediate distribution of heterogeneous fibrils, suggesting a different pattern of remodeling. Viscoelastic properties are similar after thermal shrinkage or plication, though inferior to those of intact ligaments.

A biomechanical comparison of single and double-row fixation in arthroscopic rotator cuff repair.

BACKGROUND: The optimal method for arthroscopic rotator cuff repair is not yet known. The hypothesis of the present study was that a double-row repair would demonstrate superior static and cyclic mechanical behavior when compared with a single-row repair. The specific aims were to measure gap formation at the bone-tendon interface under static creep loading and the ultimate strength and mode of failure of both methods of repair under cyclic loading. METHODS: A standardized tear of the supraspinatus tendon was created in sixteen fresh cadaveric shoulders. Arthroscopic rotator cuff repairs were performed with use of either a double-row technique (eight specimens) or a single-row technique (eight specimens) with nonabsorbable sutures that were double-loaded on a titanium suture anchor. The repairs were loaded statically for one hour, and the gap formation was measured. Cyclic loading to failure was then performed. RESULTS: Gap formation during static loading was significantly greater in the single-row group than in the double-row group (mean and standard deviation, 5.0 +/- 1.2 mm compared with 3.8 +/- 1.4 mm; p < 0.05). Under cyclic loading, the double-row repairs failed at a mean of 320 +/- 96.9 N whereas the single-row repairs failed at a mean of 224 +/- 147.9 N (p = 0.058). Three single-row repairs and three double-row repairs failed as a result of suture cut-through. Four single-row repairs and one double-row repair failed as a result of anchor or suture failure. The remaining five repairs did not fail, and a midsubstance tear of the tendon occurred. CONCLUSIONS: Although more technically demanding, the double-row technique demonstrates superior resistance to gap formation under static loading as compared with the single-row technique. CLINICAL RELEVANCE: A double-row reconstruction of the supraspinatus tendon insertion may provide a more reliable construct than a single-row repair and could be used as an alternative to open reconstruction for the treatment of isolated tears.

A novel technique to measure active tendon forces: application to the subscapularis tendon.

This paper describes the design and use of a novel system for quantification of active tendon forces. An arthroscopically implantable force probe (AIFP) was inserted arthroscopically into the subscapularis tendon of the shoulder in vivo. The output response of this device was calibrated in situ with known forces applied to the tendon using an arthroscopic technique. On recovery of motor control following interscalene regional anaesthesia, the force within the tendon during active muscle contraction was measured. The AIFP was then retrieved through an arthroscopic portal. The technique showed that the subscapularis may produce forces of 250 N during maximum internal rotation of the shoulder.