Development of an Aptamer-Based Lateral Flow Assay for the Detection of C-Reactive Protein Using Microarray Technology as a Prescreening Platform.

For improved cost-effectiveness and temperature-stability, a ready to use lateral flow assay (LFA) is developed in this work for detecting inflammation/infection biomarker C-reactive protein (CRP) in human patient samples on the basis of aptamers. In prescreening investigations, an aptamer with CRP affinity was immobilized on microarray chips in forward and sandwich formats to optimize assay conditions. We suggest these microarray techniques as a resource-sparing and fast-screening instrument for evaluation of various conditions. The capability of the aptamer to detect CRP was shown. Optimized assay conditions were consequently transferred to the LFA-platform. Here we could demonstrate for the first time an aptamer-based LFA for the detection of CRP in human patient samples in pathologically relevant concentrations. The cutoff for CRP detection is set at 10 mg/L, providing a distinctive "yes" (≥10 mg/L CRP) or "no" (<10 mg/L CRP) answer for the patient. The resulting aptamer-based LFA is promising with regard to its application as point-of-care testing (POCT) for efficient monitoring, especially of patients affected by frequent infections or inflammations.

Cancer cell-selective, clathrin-mediated endocytosis of aptamer decorated nanoparticles.

Lung cancer is the leading cause of cancer mortality worldwide, resulting in 88% deaths of all diagnosed patients. Hence, novel therapeutic modalities are urgently needed. Single-stranded oligonucleotide-based aptamers (APTs) are excellent ligands for tumor cell targeting. However, the molecular mechanisms underlying their internalization into living cells have been poorly studied. Towards the application of APTs for active drug targeting to cancer cells, we herein studied the mechanism underlying S15-APT internalization into human non-small cell lung cancer A549 cells. We thus delineated the mode of entry of a model nanomedical system based on quantum dots (QDs) decorated with S15-APTs as a selective targeting moiety for uptake by A549 cells. These APT-decorated QDs displayed selective binding to, and internalization by target A549 cells, but not by normal human bronchial epithelial BEAS2B, cervical carcinoma (HeLa) and colon adenocarcinoma CaCo-2 cells, hence demonstrating high specificity. Flow cytometric analysis revealed a remarkably low dissociation constant of S15-APTs-decorated QDs to A549 cells (Kd = 13.1 ± 1.6 nM). Through the systematic application of a series of established inhibitors of known mechanisms of endocytosis, we show that the uptake of S15-APTs proceeds via a classical clathrin-dependent receptor-mediated endocytosis. This cancer cell-selective mode of entry could possibly be used in the future to evade plasma membrane-localized multidrug resistance efflux pumps, thereby overcoming an important mechanism of cancer multidrug resistance.

Biofunctional quantum dots as fluorescence probe for cell-specific targeting.

We describe here the synthesis, characterization, bioconjugation, and application of water-soluble thioglycolic acid TGA-capped CdTe/CdS quantum dots (TGA-QDs) for targeted cellular imaging. Anti-human epidermal growth factor receptor 2 (HER2) antibodies were conjugated to TGA-QDs to target HER2-overexpressing cancer cells. TGA-QDs and TGA-QDs/anti-HER2 bioconjugates were characterized by fluorescence and UV-Vis spectroscopy, X-ray diffraction (XRD), hydrodynamic sizing, electron microscopy, and gel electrophoresis. TGA-QDs and TGA-QDs/anti-HER2 were incubated with cells to examine cytotoxicity, targeting efficiency, and cellular localization. The cytotoxicity of particles was measured using an MTT assay and the no observable adverse effect concentration (NOAEC), 50% inhibitory concentration (IC50), and total lethal concentration (TLC) were calculated. To evaluate localization and targeting efficiency of TGA-QDs with or without antibodies, fluorescence microscopy and flow cytometry were performed. Our results indicate that antibody-conjugated TGA-QDs are well-suited for targeted cellular imaging studies.

Folic acid-modified clay: targeted surface design for cell culture applications.

Here we report the preparation, characterization and application of folic acid modified Montmorillonite clay (FA-Mont) as a cell culture material. Clays exhibit unique properties such as good mechanical and chemical stabilities, high surface area, low toxicity and easy combination with functional organic groups. FA was used as a modifier to facilitate adhesion of folate positive cells on the clay surface. FA-Mont was characterized using FT-IR, XRD, zeta potential measurements as well as thermogravimetric analyses. Finally, the usage potential of FA-Mont as a receptor mediated cell adhesion material was successfully proved by using folate receptor (FR) rich HeLa and FR poor A-549 cells. The cell adhesion studies were monitored and imaged by fluorescence and scanning electron microscopy techniques.

Macroporous methacrylate-based monoliths as platforms for DNA microarrays.

Macroporous monoliths with different surface functionalization (reactive groups) were utilized as platforms for DNA analysis in microarray format. The slides based on a copolymer glycidyl methacrylate-co-ethylene dimethacrylate (GMA-EDMA) have been chosen as well known and thoroughly studied standard. In particular, this material has been used at optimization of DNA microanalytical procedure. The concentration and pH of spotting solution, immobilization temperature and time, blocking agent and coupling reaction duration were selected as varied parameters. The efficiency of analysis performed on 3-D monolithic platforms was compared to that established for commercially available glass slides. As a practical example, a diagnostic test for detection of CFTR gene mutation was carried out. Additionally, the part of presented work was devoted to preparation of aptamer-based test-system that allowed successful and highly sensitive detection both of DNA and protein.

Laser ablation-based one-step generation and bio-functionalization of gold nanoparticles conjugated with aptamers.

BACKGROUND: Bio-conjugated nanoparticles are important analytical tools with emerging biological and medical applications. In this context, in situ conjugation of nanoparticles with biomolecules via laser ablation in an aqueous media is a highly promising one-step method for the production of functional nanoparticles resulting in highly efficient conjugation. Increased yields are required, particularly considering the conjugation of cost-intensive biomolecules like RNA aptamers. RESULTS: Using a DNA aptamer directed against streptavidin, in situ conjugation results in nanoparticles with diameters of approximately 9 nm exhibiting a high aptamer surface density (98 aptamers per nanoparticle) and a maximal conjugation efficiency of 40.3%. We have demonstrated the functionality of the aptamer-conjugated nanoparticles using three independent analytical methods, including an agglomeration-based colorimetric assay, and solid-phase assays proving high aptamer activity. To demonstrate the general applicability of the in situ conjugation of gold nanoparticles with aptamers, we have transferred the method to an RNA aptamer directed against prostate-specific membrane antigen (PSMA). Successful detection of PSMA in human prostate cancer tissue was achieved utilizing tissue microarrays. CONCLUSIONS: In comparison to the conventional generation of bio-conjugated gold nanoparticles using chemical synthesis and subsequent bio-functionalization, the laser-ablation-based in situ conjugation is a rapid, one-step production method. Due to high conjugation efficiency and productivity, in situ conjugation can be easily used for high throughput generation of gold nanoparticles conjugated with valuable biomolecules like aptamers.