RESUMO
The apparent transfer coefficient, which gives the magnitude of the potential dependence of the electrochemical reaction rates, is the key quantity for the elucidation of electrochemical reaction mechanisms. We introduce the application of an ac method to determine the apparent transfer coefficient alpha' for the oxidation of pre-adsorbed CO at polycrystalline and single-crystalline Pt electrodes in sulfuric acid. The method allows to record alpha' quasi continuously as a function of potential (and time) in cyclic voltammetry or at a fixed potential, with the reaction rate varying with time. At all surfaces (Pt(poly), Pt(111), Pt(665), and Pt(332)) we clearly observed a transition of the apparent transfer coefficient from values around 1.5 at low potentials to values around 0.5 at higher potentials. Changes of the apparent transfer coefficients for the CO oxidation with potential were observed previously, but only from around 0.7 to values as low as 0.2. In contrast, our experimental findings completely agree with the simulation by Koper et al., J. Chem. Phys., 1998, 109, 6051-6062. They can be understood in the framework of a Langmuir-Hinshelwood mechanism. The transition occurs when the sum of the rate constants for the forward reaction (first step: potential dependent OH adsorption, second step: potential dependent oxidation of CO(ad) with OH(ad)) exceeds the rate constant for the back-reaction of the first step. We expect that the ac method for the determination of the apparent transfer coefficient, which we used here, will be of great help also in many other cases, especially under steady conditions, where the major limitations of the method are avoided.
RESUMO
We have extended the study of anomalous IR properties, which were initially discovered on nanostructured films of platinum group metals and alloys, to nanostructured films of nickel, a member of the iron group triad, and broadened the fundamental knowledge on this subject. Nanostructured thin films of nickel supported on glassy carbon [nm-Ni/GC(n)] were prepared by electrochemical deposition under cyclic voltammetric conditions, and the thickness of films was altered systematically by varying the number (n) of potential cycling within a defined potential range for electrodeposition. Electrochemical in situ scanning tunneling microscopy (STM) was employed to monitor the electrochemical growth of nanostructured Ni films. These in situ STM images illustrated that, along the increase of the film thickness, Ni films have undergone a transformation from layer structure to island structure and finally to lumpish arris structure. Investigations by in situ FTIR spectroscopy employing adsorbed CO as the probe revealed that these nanostructures of Ni films yield abnormal IR features, Fano-like IR features, and normal IR features, respectively. The IR bands of CO adsorbed on Ni thin films of a layer structure were inverted in their direction and enhanced in their intensity up to 15.5 times on an nm-Ni/GC(4) electrode. The Fano-like IR features, which are defined as a bipolar band with its negative-going peak on the low wavenumber side and its positive-going peak on the high wavenumber side, are observed for the first time on Ni thin films of an island nanostructure, i.e., at the nm-Ni/GC(16) electrode. IR features changed to normal absorption in CO adsorbed on the nm-Ni/GC(25) electrode, i.e., that with lumpish arris nanostructured Ni film of a larger thickness.
