RESUMO
Most of the studies focused on V2O5 have been devoted to obtaining specific morphology and microstructure for its intended applications. Two dimensional (2D) V2O5 has the most valuable structure because of its unique planar configuration that can offer more active sites. In this study, a bottom-up and low-cost method that is hydrothermal combined with spin-coating and subsequent annealing was developed to prepare 2D V2O5 nanosheets film on quartz substrate. First, VOOH nanosheets were prepared by the hydrothermal method using V2O5 powders and EG as raw materials. Further, V2O5 nanosheets with an average lateral size over 500 nm and thickness less than 10 nm can be prepared from the parent VOOH nanosheets by annealing at 350 °C for 15 min in air. The prepared V2O5 nanosheets film was assembled of multiple nanosheets. The structural, morphological, microstructural and optical properties of the films were respective investigated by XRD, SEM, TEM and UV-Vis. The photodetector based on V2O5 nanosheets film shows good photoresponse with a response time of 2.4 s and a recovery time of 4.7 s.
RESUMO
Amorphous indium zinc tin oxide (a-IZTO) is a kind of transparent conductive oxide (TCO), which can be used in transparent electrodes, transistors, and flexible devices. At present, a key limitation of a-IZTO is the costly vacuum manufacturing technology, and its commercial production is also restricted by the complex raw material preparation process. In this article, we report a liquid metal-based van der Waals (vdW) exfoliation technique by which a-IZTO films with several nanometres thickness are fabricated. The a-IZTO films fabricated in ambient air have a size on the centimeter scale and an optical transmittance of 99.64%; they are also large-area flexible oxide films. In order to illustrate the capabilities of this technology, we fabricated thin film transistors (TFTs) and photodetectors based on a-IZTO films. An a-IZTO thin film transistor (TFT) has an on/off ratio of 106. When the Vds is 5 V, the responsivity, detectivity and external quantum efficiency of an a-IZTO photodetector are 7.57 × 104 A W-1, 4.00 × 1015 Jones and 3.68 × 105%, respectively, exhibiting one of the top performances in this field.
RESUMO
Recent advances in two-dimensional (2D) materials play an essential role in boosting modern electronics and optoelectronics. Thus far, transition metal dichalcogenides (TMDs) as emerging members of 2D materials, and the van der Waals heterostructures (vdWHs) based on TMDs have been extensively investigated owing to their prominent capabilities and unique crystal structures. In this work, an original vdWH composed of molybdenum disulfide (MoS2) and platinum disulfide (PtS2) was comprehensively studied as a field-effect transistor (FET) and photodetector. A gate-tunable rectifying behavior was obtained, stemming from the band design of PtS2/MoS2 vdWH. Upon 685 nm laser illumination, it also exhibited a superior photodetection performance with a distinctly high photoresponsivity of 403 A W-1, a comparable detectivity of 1.07 × 1011 Jones, and an excellent external quantum efficiency of 7.32 × 104%. More importantly, fast rise (24 ms) and decay (21 ms) times were obtained under 685 nm light illumination attributed to the unilateral depletion region structure. Further, the photovoltaic effect and photocurrent of the heterojunction could be modulated by a back gate voltage. All these results indicated that such 2D-TMD-based vdWHs provide a new idea for realizing high-performance electronic and optoelectronic devices.
RESUMO
van der Waals (vdW) heterodiodes composed of two-dimensional (2D) layered materials led to a new prospect in photoelectron diodes and photovoltaic devices. Existing studies have shown that Type-I heterostructures have great potential to be used as photodetectors; however, the tunneling phenomena in Type-I heterostructures have not been fully revealed. Herein, a highly efficient nn+ WS2/PtS2 Type-I vdW heterostructure photodiode is constructed. The device shows an ultrahigh reverse rectification ratio of 105 owing to the transmission barrier-induced low reverse current. A unilateral depletion region is formed on WS2, which inhibits the recombination of carriers at the interface and makes the external quantum efficiency (EQE) of the device reach 67%. Due to the tunneling mechanism of the device, which allows the co-existence of a large photocurrent and a low dark current, this device achieves a light on/off ratio of over 105. In addition, this band design allows the device to maintain a high detectivity of 4.53 × 1010 Jones. Our work provides some new ideas for exploring new high-efficiency photodiodes.
