RESUMO
Inserting an insulating layer between the charge transport layer (CTL) and quantum dot emitting layer (QDL) is widely used in improving the performance of quantum dot light-emitting diodes (QLEDs). However, the additional layer inevitably leads to energy loss and joule heat. Herein, a monolayer silane coupling agent is used to modify the said interfaces via the self-limiting adsorption effect. Because the ultrathin layers induce negligible series resistance to the device, they can partially passivate the interfacial defects on the electron transport side and help confine the electrons within the QDL on the hole transport side. These interfacial modifications can not only suppress the nonradiative recombination but also slow down the aging of the hole transport layer. The findings here underline a low-temperature adsorption-based strategy for effective interfacial modification which can be used in any layer-by-layer device structures.
RESUMO
The development of efficient perovskite light-emitting diodes (PeLEDs) relies strongly on the fabrication of perovskite films with rationally designed structures (grain size, composition, surface, etc.). Therefore, an understanding of structure-performance relationships is of vital importance for developing high-performance perovskite devices, particularly for devices with in-situ fabricated perovskite nanocrystal films. In this study, we reveal the vertical structure of an in-situ fabricated quasi-two-dimensional perovskite film. By combining time-of-flight secondary ion mass spectrometry, energy dispersive spectroscopy, grazing incidence wide-angle X-ray scattering (GIWAXS), and low-temperature photoluminescence spectra, we illustrate that the resulting in-situ fabricated DPPA2Csn-1Pbn(Br0.3I0.7)3n+1 (DPPA+: 3,3-diphenylpropylammonium) film has a gradient structure with a very thin layer of ligands on the surface, predominantly small-n domains at the top, and predominantly large-n domains at the bottom owing to the solubility difference of the precursors. In addition, GIWAXS measurements show that the domain of n = 2 on the top layer has an ordered in-plane alignment. Based on the understanding of the film structure, we developed an in-situ fabrication process with ligand exchange to achieve efficient pure red PeLEDs at 638 nm with an average external quantum efficiency (EQE) of 7.4%. The optimized device had a maximum luminance of 623 cd/m2 with a peak EQE of 9.7%.
RESUMO
The rapid evolution of the Internet of Things has engendered increased requirements for low-cost, self-powered UV photodetectors. Herein, high-performance self-driven UV photodetectors are fabricated by designing asymmetric metal-semiconductor-metal structures on the high-quality large-area CsCu2I3 microwire arrays. The asymmetrical depletion region doubles the photocurrent and response speed compared to the symmetric structure device, leading to a high responsivity of 233 mA/W to 355 nm radiation. Notably, at 0 V bias, the asymmetric device produces an open-circuit voltage of 356 mV and drives to a short-circuit current of 372 pA; meanwhile, the switch ratio (Iph/Idark) reaches up to 103, indicating its excellent potential for detecting weak light. Furthermore, the device maintains stable responses throughout 10000 UV-light switch cycles, with negligible degradation even after 90-day storage in air. Our work establishes that CsCu2I3 is a good candidate for self-powered UV detection and thoroughly demonstrates its potential as a passive device.
RESUMO
Monitoring non-contact high-frequency vibrations requires improving the sensitivity and linear response of iontronic pressure sensors (IPSs). In this study, we incorporate composite electrodes comprising silver nanowires (Ag NWs) and MXene into IPSs to enhance electronic conduction and pseudocapacitance. Moreover, we utilize a novel surface-pillar microstructure, along with an internally randomized multi-bubble structure within the dielectric layer, to significantly expand the linear response range of the sensor. The resulting IPS device demonstrates exceptional linear sensitivity, measuring approximately 153.83 kPa-1, across a broad pressure range of up to 260 kPa. Additionally, it exhibits long-term stability, rapid response and recovery characteristics, and remains functional underwater. Notably, these devices exhibit remarkable capabilities in monitoring ultrasonic vibrations and accurately identifying sound wave vibrations. The integration of composite electrodes, microstructure designs, and their compatibility with underwater applications positions these IPSs as highly promising tools for precise measurements and advancements in flexible electronics technology.
RESUMO
Polarization-sensitive detectors have significant applications in modern communication and information processing. In this study. We present a polarization-sensitive detector based on a MoTe2/WTe2 heterojunction, where WTe2 forms a favorable bandgap structure with MoTe2 after forming the heterojunction. This enhances the carrier separation efficiency and photoelectric response. We successfully achieved wide spectral detection ranging from visible to near-infrared light. Specifically, under zero bias, our photodetector exhibits a responsivity (R) of 0.6 A/W and a detectivity (D*) of 3.6 × 1013 Jones for 635 nm laser illumination. Moreover, the photoswitching ratio can approach approximately 6.3 × 105. Importantly, the polarization sensitivity can reach 3.5 (5.2) at 635 (1310) nm polarized light at zero bias. This study both unveils potential for utilizing MoTe2/WTe2 heterojunctions as polarization-sensitive detectors and provides novel insights for developing high-performance optoelectronic devices.
RESUMO
Highly efficient multi-dimensional data storage and extraction are two primary ends for the design and fabrication of emerging optical materials. Although metasurfaces show great potential in information storage due to their modulation for different degrees of freedom of light, a compact and efficient detector for relevant multi-dimensional data retrieval is still a challenge, especially in complex environments. Here, we demonstrate a multi-dimensional image storage and retrieval process by using a dual-color metasurface and a double-layer integrated perovskite single-pixel detector (DIP-SPD). Benefitting from the photoelectric response characteristics of the FAPbBr2.4I0.6 and FAPbI3 films and their stacked structure, our filter-free DIP-SPD can accurately reconstruct different colorful images stored in a metasurface within a single-round measurement, even in complex environments with scattering media or strong background noise. Our work not only provides a compact, filter-free, and noise-robust detector for colorful image extraction in a metasurface, but also paves the way for color imaging application of perovskite-like bandgap tunable materials.
RESUMO
Recently, a new layered material, Mn3Si2Te6, was identified to be a semiconductor with nodal-line topological property and ferrimagnetic ground state. In this work, we propose a series of structures, M3Si2Te6(M = alkaline earth and transition metals), and systematically investigate their mechanical, magnetic and electronic properties, and the strain effect to enrich the family of the layered materials for practical applications. We find 13 stable M3Si2Te6, including 5 semiconductors (M = Ca, Sr, Fe, Ru and Os) and 8 metals (M = Sc, Ti, Nb, Ta, Cr, Mo, W and Tc). Two structures (M = Ti and Cr) are antiferromagnetic (AFM), while other structures are non-magnetic (NM). Similar to Mn3Si2Te6, the AFM structures exhibit magnetic anisotropy energies (MAEs) and semiconductors have anisotropic electron effective masses. We further show that compressions along thez-axis can effectively tune the electronic and magnetic properties, such as the semiconductor-metal and NM-AFM transition in Fe3Si2Te6, the two-fold degeneracy of the valence band maximums in Sr3Si2Te6, as well as the reduced MAE for all magnetic structures. These results demonstrate the diverse properties of the layered M3Si2Te6family and provide promising theoretical predictions for the future design of new layered materials.
RESUMO
The increased popularity of wearable electronic devices has led to a greater need for advanced sensors. However, fabricating pressure sensors that are flexible, highly sensitive, robust, and compatible with large-scale fabrication technology is challenging. This work investigates a piezoresistive sensor constructed from an MXene/MoS2 hierarchical nanostructure, which is obtained through an easy and inexpensive fabrication process. The sensor exhibits a high sensitivity of 0.42 kPa-1 (0-1.5 kPa), rapid response (â¼36 ms), and remarkable mechanical durability (â¼10,000 cycles at 13 kPa). The sensor has been demonstrated to be successful in detecting human motion, speech recognition, and physiological signals, particularly in analyzing human pulse. These data can be used to alert and identify irregularities in human health. Additionally, the sensing units are able to construct sensor arrays of various sizes and configurations, enabling pressure distribution imaging in a variety of application scenarios. This research proposes a cost-effective and scalable approach to fabricating piezoresistive sensors and sensor arrays, which can be utilized for monitoring human health and for use in human-machine interfaces.
Assuntos
Molibdênio , Nanoestruturas , Humanos , Frequência Cardíaca , Movimento (Física)RESUMO
Lead halide perovskite quantum dots (QDs) have attracted great interest for application in light-emitting diodes (LEDs) due to their high photoluminescence quantum yield (PLQY), solution processability, and high color purity, showing great potential for next-generation full-color display and lighting technologies. Conventional long-chain insulating oleic acid (OA)/oleamine (OAm) ligands exhibit dynamic binding to the surface of QDs, resulting in a plethora of extra surface defects and inferior optoelectronic properties. Herein, a sole multifunctional ligand with optimized carbon chain length, that is, 2-thiophenepropylamine bromide (ThPABr), was creatively designed and introduced into CsPbBr3 QDs, which not only replaces OAm and provides a bromine source but also coordinates with the uncoordinated surface Pb2+ of QDs through the thiophene, passivating surface defects and increasing the PLQY of the film to 83%. More importantly, the interaction between the electron donor-thiophene ring and QDs can enhance electron injection and improve carrier balance. The resulting green LED exhibited significant performance improvement, showing ultrahigh spectral stability under high operating voltage, achieving a maximum external quantum efficiency of 10.5%, and extending the operating lifetime to 5-fold that of the reference. Designing a single multifunctional ligand presents a promising and convenient strategy for selecting surface ligands that can enhance the performance of LEDs or other optoelectronic devices.
RESUMO
Electrochemical water splitting is the primary method to produce green hydrogen, which is considered an efficient alternative to fossil fuels for achieving carbon neutrality. For meeting the increasing market demand for green hydrogen, high-efficiency, low-cost, and large-scale electrocatalysts are crucial. In this study, we report a simple spontaneous corrosion and cyclic voltammetry (CV) activation method to fabricate Zn-incorporated NiFe layered double hydroxide (LDH) on commercial NiFe foam, which shows excellent oxygen evolution reaction (OER) performance. The electrocatalyst achieves an overpotential of 565 mV and outstanding stability of up to 112 h at 400 mA cm-2. The active layer for OER is shown to be ß-NiFeOOH according to the results of in-situ Raman. Our findings suggest that the NiFe foam treated by simple spontaneous corrosion has promising industrial applications as a highly efficient OER catalyst.
RESUMO
The operational stability is a current bottleneck facing the quantum dot light-emitting diodes (QLEDs). In particular, the device working around turn-on voltage suffers from unbalanced charge injection and heavy power loss. Here, we investigate the operational stability of red emissive CdSe QLEDs operated at different applied voltages. Compared to the rising luminance at higher voltages, the device luminance quickly decreases when loaded around the turn-on voltage, but recovers after unloading or slight heat treatment, which is termed fatigue effects of operational QLED. The electroluminescence and photoluminescence spectra before and after a period of operation at low voltages show that the abrupt decrease in device luminance derives from the reduction of quantum yield in quantum dots. Combined with transient photoluminescence and electroluminescence measurements, as well as equivalent circuit model analysis, the electron accumulation in quantum dots mainly accounts for the observed fatigue effects of a QLED during the operation around turn-on voltage. The underlying mechanisms at the low-voltage working regime will be very helpful for the industrialization of QLED.
RESUMO
Stacked 2D perovskites provide more possibilities for next generation photodetector with more new features. Compared with its excellent optoelectronic properties, the good dielectric performance of metal halide perovskite rarely comes into notice. Here, a bifunctional perovskite based photovoltaic detector capable of two wavelength demultiplexing is demonstrated. In the Black Phosphorus/Perovskite/MoS2 structured photodetector, the comprehensive utilization of the photosensitive and dielectric properties of 2D perovskite allows the device to work in different modes. The device shows normal continuous photoresponse under 405 nm, while it shows a transient spike response to visible light with longer wavelengths. The linear dynamic range, rise/decay time, and self-powered responsivity under 405 nm can reach 100, 38 µs/50 µs, and 17.7 mA W-1 , respectively. It is demonstrated that the transient spike photocurrent with long wavelength exposure is related to the illumination intensity and can coexist with normal photoresponse. Two waveband-dependent signals can be identified and used to reflect more information simultaneously. This work provides a new strategy for multispectral detection and demultiplexing, which can be used to improve data transfer rates and encrypted communications. This work mode can inspire more multispectral photodetectors with different stacked 2D materials, especially to the optoelectronic application of the wide bandgap, high dielectric photosensitive materials.
RESUMO
High-efficiency electromagnetic (EM) functional materials are the core building block of high-performance EM absorbers and devices, and they are indispensable in various fields ranging from industrial manufacture to daily life, or even from national defense security to space exploration. Searching for high-efficiency EM functional materials and realizing high-performance EM devices remain great challenges. Herein, a simple solution-process is developed to rapidly grow gram-scale organic-inorganic (MAPbX3 , X = Cl, Br, I) perovskite microcrystals. They exhibit excellent EM response in multi bands covering microwaves, visible light, and X-rays. Among them, outstanding microwave absorption performance with multiple absorption bands can be achieved, and their intrinsic EM properties can be tuned by adjusting polar group. An ultra-wideband bandpass filter with high suppression level of -71.8 dB in the stopband in the GHz band, self-powered photodetectors with tunable broadband or narrowband photoresponse in the visible-light band, and a self-powered X-ray detector with high sensitivity of 3560 µC Gyair -1 cm-2 in the X-ray band are designed and realized by precisely regulating the physical features of perovskite and designing a novel planar device structure. These findings open a door toward developing high-efficiency EM functional materials for realizing high-performance EM absorbers and devices.
RESUMO
In this work, we report the quantitative determination of charge accumulation and recombination in an operated QLED using time-resolved electroluminescence (TREL) spectroscopy. As a supplement technique, time-resolved current (TRC) measurement was introduced and simulated using equivalent circuit model with a series resistance, a parallel resistance, and a capacitance. By modeling the key processes in a typical TREL spectra, the stages of delay, rising, and decay can be correlated to the charge accumulations, charge injection and recombination, and charge release and recombination, respectively. In particular, the rising stage can be described using a modified Langevin recombination model. The electroluminescence recombination rate can be derived by fitting the rising stage curves in the TREL spectra, providing an intrinsic parameter of the emissive materials. In all, this work provides a methodology to quantitatively determine the charge accumulation and recombination of an operational QLED device.
RESUMO
Carbon neutrality has drawn increasing attention for realizing the carbon cyclization and reducing the greenhouse effect. Although the C1 products, such as CO, can be achieved with a high Faraday efficiency, the targeted production of C2 fuels as well as the mechanism have not been systematically investigated. In this work, we carry out a first-principles study to screen dual-atom catalysts (DACs) for producing C2 fuels through the electrocatalytic carbon monoxide reduction reaction (e-CORR). We find that methanol, ethanol and ethylene can be produced on both DAC-Co and DAC-Cu, while acetate can be achieved on DAC-Cu only. Importantly, methanol and ethylene are preferred on DAC-Co, while acetate and ethylene on DAC-Cu. Furthermore, we show that the explicit solvent can enhance the adsorption and influence the protonation steps, which subsequently affects the protonation and dimerization behavior as well as the performance and selectivity of e-CORR on DACs. We further demonstrate that the C-C coupling is easy to be formed and stabilized if the Integrated Crystal Orbital Hamilton Population (ICOHP) is low because of the low energy barrier. Our findings provide not only guidance on the design of novel catalysts for e-CORR, but an insightful understanding on the reduction mechanism.
RESUMO
Copper-based halide perovskites have shown great potential in lighting and photodetection due to their excellent photoelectric properties, good stability and lead-free nature. However, as an important piece of copper-based perovskites, the synthesis and application of RbCu2I3have never been reported. Here, we demonstrate the synthesis of high-quality RbCu2I3microwires (MWs) by a fast-cooling hot saturated solution method. The prepared MWs exhibit an orthorhombic structure with a smooth surface. Optical measurements show the RbCu2I3MWs have a sharp ultraviolet absorption edge with 3.63 eV optical band gap and ultra-large stokes shift (300 nm) in photoluminescence. The subsequent photodetector based on a single RbCu2I3MW shows excellent ultraviolet detection performance. Under the 340 nm illumination, the device shows a specific detectivity of 5.0 × 109Jones and a responsivity of 380 mA·W-1. The synthesis method and physical properties of RbCu2I3could be a guide to the future optoelectronic application of the new material.
RESUMO
When considered as orthogonal bases in distinct vector spaces, the unit vectors of polarization directions and the Laguerre-Gaussian modes of polarization amplitude are inseparable, constituting a so-called classical entangled light beam. Equating this classical entanglement to quantum entanglement necessary for computing purpose, we show that the parallelism featured in Shor's factoring algorithm is equivalent to the concurrent light-path propagation of an entangled beam or pulse train. A gedanken experiment is proposed for executing the key algorithmic steps of modular exponentiation and Fourier transform on a target integer N using only classical manipulations on the amplitudes and polarization directions. The multiplicative order associated with the sought-after integer factors is identified through a four-hole diffraction interference from sources obtained from the entangled beam profile. The unique mapping from the fringe patterns to the computed order is demonstrated through simulations for the case [Formula: see text].
RESUMO
Lead-free perovskite has attracted great attention in realizing high-performance optoelectronic devices due to their excellent atmospheric stability and nontoxic characteristics. Although a pronounced ion migration effect has been observed in this new class of materials, its potential in enhancing the overall device performance is yet to be fully explored. In this work, we studied the effect of ion migrations on the carrier transport behavior and found that the recoverable migration process can contribute to enhancing the on/off ratio in a lead-free CsCu2I3 single-crystal microrod-based photodetector. In detail, we synthesized CsCu2I3 single-crystal microrods via an in-plane self-assembly supersaturated crystallization approach. These microrods with well-defined morphologies were then used to construct ultraviolet (UV)-band photodetectors, which outperform most reported lead-free perovskite photodetectors based on individual single crystals. Simultaneously, ion migration can result in asymmetric band bending in the two-terminal device, as confirmed by surface potential profiling with Kelvin probe force microscopy (KPFM). Such an effect can be harnessed to increase the on/off ratio by almost an order of magnitude. Furthermore, the lead-free CsCu2I3 single crystal exhibits excellent thermal and air stabilities. These findings demonstrate that the CsCu2I3 single-crystal microrods can be used in stable and efficient photodetection, and the ion migration effect can potentially be utilized for improving the optoelectronic performance of lead-free devices.
RESUMO
Aqueous electrochromic battery (ECB) is a multifunctional technology that shows great potential in various applications including energy-saving buildings and wearable batteries with visible energy levels. However, owing to the mismatch between traditional electrochromic materials and the electrolyte, aqueous ECBs generally exhibit poor cycling stability which bottlenecks their practical commercialization. Herein, we present an ultrastable electrochromic system composed of lithium titanate (Li4Ti5O12, LTO) electrode and Al3+/Zn2+ hybrid electrolyte. The fully compatible system exhibits excellent redox reaction reversibility, thus leading to extremely high cycling stabilities in optical contrast (12â¯500 cycles with unnoticeable degradation) and energy storage (4000 cycles with 82.6% retention of capacity), superior electrochromic performances including high optical contrast (â¼74.73%) and fast responses (4.35 s/7.65 s for bleaching/coloring), as well as excellent discharge areal capacity of 151.94 mAh m-2. The extraordinary cycling stability can be attributed to the robust [TiO6] octahedral frameworks which remain chemically active even upon the gradual substitution of Li+ with Al3+ in LTO over multiple operation cycles. The high-performance electrochromic system demonstrated here not only makes the commercialization of low-cost, high-safety aqueous-based electrochromic devices possible but also provides potential design guidance for LTO-related materials used in aqueous-based energy storage devices.
RESUMO
Excitons in van der Waals (vdW) stacking interfaces can be trapped in ordered moiré potential arrays giving rise to the attractive phenomena of quantum optics and bosonic many-body effects. Compared to the prevalent transition metal dichalcogenides (TMDs) systems, due to the wide bandgap and low dielectric constant, excitons in twist-stacked hexagonal boron nitride (hBN) are anticipated trapped in deeper moiré potential, which enhances the strength of interactions. However, constrained by the common low detectivity of weak light-emitting in the deep-ultraviolet (DUV) bands, the moiré excitons in twist-hBN remain elusive. Here, we report that a remarkable DUV emitting band (peak located at â¼260 nm) only emerges at the twisted stacking area of hBN, which is performed by a high collection efficiency and spatially-resolved cathodoluminescence (CL) at room temperature. Significant peak red shifting contrast to defect-bound excitons of bulk hBN indicates the giant trapping effects of moiré potential for excitons. The observation of deeply trapped excitons motivates further studies of bosonic strongly correlation physics based on the twist-hBN system.