Vertical Cross-Alignments of 2D Semiconductors with Steered Internal Electric Field for Urea Electrooxidation via Balancing Intermediates Adsorption.

Single-component electrocatalysts generally lead to unbalanced adsorption of OH- and urea during urea oxidation reaction (UOR), thus obtaining low activity and selectivity especially when oxygen evolution reaction (OER) competes at high potentials (>1.5 V). Herein, a cross-alignment strategy of in situ vertically growing Ni(OH)2 nanosheets on 2D semiconductor g-C3N4 is reported to form a hetero-structured electrocatalyst. Various spectroscopy measurements including in situ experiments indicate the existence of enhanced internal electric field at the interfaces of vertical Ni(OH)2 and g-C3N4 nanosheets, favorable for balancing adsorption of reaction intermediates. This heterojunction electrocatalyst shows high-selectivity UOR compared to pure Ni(OH)2, even at high potentials (>1.5 V) and large current density. The computational results show the vertical heterojunction could steer the internal electric field to increase the adsorption of urea, thus efficiently avoiding poisoning of strongly adsorbed OH- on active sites. A membrane electrode assembly (MEA)-based electrolyzer with the heterojunction anode could operate at an industrial-level current density of 200 mA cm-2. This work paves an avenue for designing high-performance electrocatalysts by vertical cross-alignments of active components.

Synergistic Lewis and Brønsted Acid Sites Promote OH* Formation and Enhance Formate Selectivity: Towards High-efficiency Glycerol Valorization.

As a sustainable valorization route, electrochemical glycerol oxidation reaction (GOR) involves in formation of key OH* and selective adsorption/cleavage of C-C(O) intermediates with multi-step electron transfer, thus suffering from high potential and poor formate selectivity for most non-noble-metal-based electrocatalysts. So, it remains challenging to understand the structure-property relationship as well as construct synergistic sites to realize high-activity and high-selectivity GOR. Herein, we successfully achieve dual-high performance with low potentials and superior formate selectivity for GOR by forming synergistic Lewis and Brønsted acid sites in Ni-alloyed Co-based spinel. The optimized NiCo oxide solid-acid electrocatalyst exhibits low reaction potential (1.219 V@10 mA/cm2) and high formate selectivity (94.0 %) toward GOR. In situ electrochemical impedance spectroscopy and pH-dependence measurements show that the Lewis acid centers could accelerate OH* production, while the Brønsted acid centers are proved to facilitate high-selectivity formation of formate. Theoretical calculations reveal that NiCo alloyed oxide shows appropriate d-band center, thus balancing adsorption/desorption of C-O intermediates. This study provides new insights into rationally designing solid-acid electrocatalysts for biomass electro-upcycling.

Vertical 3D Nanostructures Boost Efficient Hydrogen Production Coupled with Glycerol Oxidation Under Alkaline Conditions.

Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality. However, it is limited by the high overpotential of oxygen evolution reaction (OER) at the anode. To reduce the operating voltage of electrolyzer, herein thermodynamically favorable glycerol oxidation reaction (GOR) is proposed to replace the OER. Moreover, vertical NiO flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution, respectively. Meanwhile, excluding the explosion risk of mixed H2/O2, a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer. Impressively, the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV, and exhibits good long-term stability. This work provides a new paradigm of hydrogen production with low cost and good feasibility.

Suppressing Local Dendrite Hotspots via Current Density Redistribution Using a Superlithiophilic Membrane for Stable Lithium Metal Anode.

Li metal anode is considered as one of the most desirable candidates for next-generation battery due to its lowest electrochemical potential and high theoretical capacity. However, undesirable dendrite growth severely exacerbates the interfacial stability, thus damaging battery performance and bringing safety concerns. Here, an efficient strategy is proposed to stabilize Li metal anode by digesting dendrites sprout using a 3D flexible superlithiophilic membrane consisting of poly(vinylidene fluoride) (PVDF) and ZnCl2 composite nanofibers (PZEM) as a protective layer. Both the experimental studies and theoretical calculations show the origin of superlithiophilicity ascribed to a strong interaction between ZnCl2 and PVDF to form the ZnF bonds. The multifield physics calculation implies effective removal of local dendrite hotspots by PZEM via a more homogeneous Li+ flux. The PZEM-covered Li anode (PZEM@Li) exhibits superior Li deposition/stripping performance in a symmetric cell over 1100 cycles at a high current density of 5 mA cm-2 . When paired with LiFePO4 (LFP), PZEM@Li|LFP full cell remains stable over 1000 cycles at 2 C with a degradation rate of 0.0083% per cycle. This work offers a new route for efficient protection of Li metal anode for practical applications.

Coordination environment tuning of nickel sites by oxyanions to optimize methanol electro-oxidation activity.

To achieve zero-carbon economy, advanced anode catalysts are desirable for hydrogen production and biomass upgrading powered by renewable energy. Ni-based non-precious electrocatalysts are considered as potential candidates because of intrinsic redox attributes, but in-depth understanding and rational design of Ni site coordination still remain challenging. Here, we perform anodic electrochemical oxidation of Ni-metalloids (NiPx, NiSx, and NiSex) to in-situ construct different oxyanion-coordinated amorphous nickel oxyhydroxides (NiOOH-TOx), among which NiOOH-POx shows optimal local coordination environment and boosts electrocatalytic activity of Ni sites towards selective oxidation of methanol to formate. Experiments and theoretical results demonstrate that NiOOH-POx possesses improved adsorption of OH* and methanol, and favors the formation of CH3O* intermediates. The coordinated phosphate oxyanions effectively tailor the d band center of Ni sites and increases Ni-O covalency, promoting the catalytic activity. This study provides additional insights into modulation of active-center coordination environment via oxyanions for organic molecules transformation.

Surface Engineering of Cr-Doped Cobalt Molybdate toward High-Performance Hydrogen Evolution.

Replacing commercial noble metal catalysts with earth-abundant metal catalysts for hydrogen production is an important research direction for electrolytic water. Improving the catalytic performance of non-noble metals while maintaining stability is a key challenge for alkaline hydrogen evolution. Herein, we combined alkali etching and surface phosphating to regulate the properties of Cr-doped CoMoO4 material, forming a surface structure in which amorphous cobalt phosphate and Cr-doped Co(Mo)Ox coexist. As expected, the as-prepared catalytic material exhibits remarkable hydrogen evolution activity in 1.0 M KOH, only requiring a low overpotential of 52.7 mV to achieve a current density of 10 mA cm-2, and can maintain this current density for 24 h. The characterization and analysis of the catalyst before and after the stability test reveal that the Cr doping and surface engineering (i.e., alkali etching and phosphating) synergistically increase the adsorption and dissociation of water, optimize the desorption of H, and ultimately accelerate hydrogen evolution. This work provides a new strategy for tailoring nonprecious metal materials to improve the hydrogen production from water electrolysis.

Hollow MoS2/Co nanopillars with boosted Li-ion diffusion rate and long-term cycling stability.

Hollow MoS2/Co-0.1 nanopillars were successfully synthesized by sulfurizing CoMoO4 and subsequent acid etching, which were used as the anode material for lithium ion batteries. The introduction of suitable metal Co into MoS2 nanopillars effectively accelerates electron/ion transport kinetics, leading to high specific capacity and superior rate capability and cycling stability.