Failure Analysis for Overall Overturning of Concrete Single-Column Pier Bridges Induced by Temperature and Overloaded Vehicles.

Several overloaded-induced overturning incidents of girder bridges with single-column piers have occurred in recent years, resulting in significant casualties and economic losses. Temperature, in addition to overloading, may also play a role in exacerbating bridge overturning. To investigate the association between temperature and bridge overturning, an explicit finite element model (EFEM) of a three-span concrete curved continuous bridge considering nonlinearities was developed to simulate overall collapse. The effects of uniform and gradient temperatures on the overall overturning stability of curved and straight bridges were evaluated based on the EFEMs. Furthermore, the temperature-bridge coupling model and temperature-vehicle-bridge coupling model were utilized to examine how gradient temperature influences bridge overturning. The results show that the overall overturning collapse of a bridge follows four stages: stabilization, transition, risk and overturning. Variations in uniform temperature from -30 °C to 60 °C had a negligible effect on the ultimate vehicle weight for bridge overturning, with a variation of less than 1%. As the gradient temperature ranged from -30 °C to 60 °C, curved bridges show less than a 2% variation in ultimate vehicle weights, compared to a range of -6.1% to 11.7% for straight bridges. The torsion caused by positive gradient temperature in curved bridges can exacerbate bridge overturning, while negative gradient temperature in straight bridges can lead the girder to 'upward warping', facilitating girder separation from bearings. Monitoring the girder rotation angle and vertical reaction force of bearings can serve as important indicators for comparing the stability of bridges.

Comparison of Dynamic Amplification Factor of Deflection and Bending Moment of Highway Continuous Box-Girder Bridges by Mode Superposition.

There are differences between the dynamic deflection and bending moment (strain) in the same section of continuous girder bridges. However, the selection of the response for calculating dynamic amplification factors (DAFs), which are essential for bridge health monitoring and safety assessment, remains controversial. Modes may play a role in the relationship between the deflection DAF and the bending moment DAF in both numerical analysis and field tests. To investigate the distinctions between the DAFs of the deflection and bending moment in a continuous girder bridge, functional expressions of the DAFs were derived, taking into account multi-factor coupling under concentrated forces. The interaction effects of the mode and road surface condition (RSC), vehicle speed, bridge span length, and span number on the deflection DAF, the bending moment DAF, and the ratio of the deflection DAF to the bending moment DAF (RDM) of precast continuous box-girder bridges were analyzed using vehicle-bridge interaction. To ensure the accuracy of the DAF in numerical computations and experimental tests, two types of accuracy indexes and the corresponding cut-off modes were provided. Validation was conducted by performing dynamic load tests on two field bridges. The results indicate that different modes have a significant effect on the RDM of the mid-span section of a bridge. When considering multiple factors, the deflection DAF and bending moment DAF of the mid-span section increased rapidly with the considered modes and then stabilized. Statistically, the RDM of all nine bridges ranged from 1.00 to 1.12, indicating that the deflection DAF was greater than the bending moment DAF. The suggested cut-off modes can be utilized for efficient and accurate calculation of the DAF and response signal fidelity.