Clinical pharmacology considerations for first-in-human clinical trials for enzyme replacement therapy.

Inborn errors of metabolism (IEM) such as lysosomal storage disorders (LSDs) are conditions caused by deficiency of one or more key enzymes, cofactors, or transporters involved in a specific metabolic pathway. Enzyme replacement therapy (ERT) provides an exogenous source of the affected enzyme and is one of the most effective treatment options for IEMs. In this paper, we review the first-in-human (FIH) protocols for ERT drug development programs supporting 20 Biologic License Applications (BLA) approved by the Center for Drug Evaluation and Research (CDER) at the US Food and Drug Administration (FDA) in the period of May 1994 to September 2023. We surveyed study design elements across these FIH protocols including study population, dosage form, dose selection, treatment duration, immunogenicity, biomarkers, and study follow-up. A total of 18 FIH trials from 20 BLAs were identified and of those, 72% (13/18) used single ascending dose (SAD) and/or multiple ascending dose (MAD) study design, 83% (15/18) had a primary objective of assessing the safety and tolerability, 72% (13/18) included clinical endpoint assessments, and 94% (17/18) included biomarker assessments as secondary or exploratory endpoints. Notably, the majority of ERT products tested the approved route of administration and the approved dose was tested in 83% (15/18) of FIH trials. At last, we offer considerations for the design of FIH studies.

Pharmacokinetics-Bridging Between Autoinjectors and Prefilled Syringes for Subcutaneous Injection: Case Examples Revealing a Knowledge Gap.

Comparative pharmacokinetics (PK) studies have efficiently served as the bridge between autoinjectors and prefilled syringes given the underlying principles that comparable exposure could translate to comparable efficacy and safety. This article discusses approaches used to address uncertainties associated with the observation of noncomparable PK leading to the successful introduction of new autoinjector devices for monoclonal antibody and Fc-fusion protein products. Information from seven case examples suggests a knowledge gap that warrants attention in autoinjector development.

Clinical Pharmacology Approaches to Support Approval of New Routes of Administration for Therapeutic Proteins.

Intravenous or subcutaneous routes of administration (ROAs) are common dosing routes for therapeutic proteins. Eleven therapeutic proteins with approval for one ROA have subsequently received approval for a second ROA. The clinical programs supporting the second ROA consistently leveraged data from the first ROA and included studies that characterized the pharmacokinetics (PKs) of the drug administered by the new ROA to identify an appropriate dosage regimen. The selected dosing regimen was then further evaluated in clinical trials designed with various primary end points. All programs implemented model-informed drug development approaches to ensure that the selected regimens would achieve comparable systemic exposures (PK-based bridging) or pharmacodynamic (PD) responses (PD-based bridging) as the reference ROA. To support the approval of a second ROA, these programs either demonstrated noninferiority in PK, PD, and/or clinical end points for the second ROA, or established efficacy and safety through a comparison to a placebo treatment. The accumulative examples showed that clinical trials which provided the primary evidence to support approvals of the second ROA generally demonstrated noninferiority in the systemic exposures regardless of being specified as an end point or not in the study protocols. The experience to date supports the use of PK- and PD-based bridging approaches not only in the selection of dosing regimens for a second ROA to be tested in clinical studies, but also for providing evidence of effectiveness to support approval, when appropriate.

A survey of FDA Approved Monoclonal Antibodies and Fc-fusion Proteins for Manufacturing Changes and Comparability Assessment.

OBJECTIVE: Manufacturing changes occur commonly throughout stages of biologics development and may result in product quality attribute changes. As changes in critical quality attributes have the potential to affect clinical safety and efficacy of products, it is imperative to ensure the quality and clinical performance before introducing the after-change products. Thus, we embarked on this project to understand what data have supported the manufacturing changes for licensed products with pre- and post-approval changes. METHODS: We surveyed the manufacturing changes of 85 monoclonal antibodies and 10 Fc fusion proteins approved by the Food and Drug Administration as of December 25, 2021. After collecting the type and timing of changes for these products, we investigated the approaches that provided supporting data for the changes. The source documents included reports submitted by applicants and FDA's regulatory reviews. RESULTS: Analytical comparability was assessed to support all identified manufacturing changes. Supporting clinical data were available in 92% of these manufacturing changes; including data from pharmacokinetic comparability studies alone (3%), other studies on efficacy or safety (70%) and a combination of both (19%). Clinical pharmacokinetic comparability data contributed to supporting substantial changes, such as host cell type or master cell bank changes, concentration or formulation changes, and changes from pre-filled syringes to autoinjectors, especially when introduced after completing pivotal studies. CONCLUSION: Our comprehensive retrospective analysis provides an understanding of the regulatory experience and industry practice, which could facilitate developing appropriate comparability approaches to support manufacturing changes in the future.

Dose selection for biological enzyme replacement therapy indicated for inborn errors of metabolism.

This paper summarizes key features of the dose-finding strategies used in the development of 11 approved new molecular entities that are first-in-class enzyme replacement therapy (ERT), with a goal to gain insight into the dose exploration approaches to inform efficient dose-finding in future development of biological products for Inborn Errors of Metabolism (IEM). Dose exploration should preferably begin in in vitro studies, followed by testing multiple doses in an appropriate animal disease model, when available, which can provide important information for dose assessment in humans. Performing adequate dose-finding in early phase clinical studies in a well-defined study population, including pediatric subjects, is generally critical to inform dose selection for pivotal trials; alternatively, additional dose exploration can be incorporated as part of a pivotal trial. Two important considerations for successful dose selection include (1) identifying appropriate disease-specific endpoints, including pharmacodynamic (PD) end points and intermediate clinical end points or clinical end points, and (2) designing a study with adequate treatment durations for evaluating these end points. Appropriately selected PD biomarkers is useful for dose selection, and early development of these biomarkers can facilitate the overall clinical development program. Optimization of ERT doses, as well as evaluations of patient intrinsic factors and/or immune tolerance strategies may be necessary to overcome antibody responses or increase efficacy in IEM.

Impact of Organ Impairment on the Pharmacokinetics of Therapeutic Peptides and Proteins.

The kidneys and liver are major organs involved in eliminating small-molecule drugs from the body. Characterization of the effects of renal impairment (RI) and hepatic impairment (HI) on pharmacokinetics (PK) have informed dosing in patients with these organ impairments. However, the knowledge about the impact of organ impairment on therapeutic peptides and proteins is still evolving. In this study, we reviewed how often therapeutic peptides and proteins were assessed for the effect of RI and HI on PK, the findings, and the resulting labeling recommendations. RI effects were reported in labeling for 30 (57%) peptides and 98 (39%) proteins and HI effects for 20 (38%) peptides and 55 (22%) proteins. Dose adjustments were recommended for RI in 11 of the 30 (37%) peptides and 10 of the 98 (10%) proteins and for HI in 7 of the 20 (35%) peptides and 3 of the 55 (5%) proteins. Additional actionable labeling includes risk mitigation strategies; for example, some product labels have recommended avoid use or monitor toxicities in patients with HI. Over time, there is an increasing structural diversity of therapeutic peptides and proteins, including the use of non-natural amino acids and conjugation technologies, which suggests a potential need for reassessing the need to evaluate the effect of RI and HI. Herein, we discuss scientific considerations for weighing the risk of PK alteration due to RI or HI for peptide and protein products. We briefly discuss other organs that may affect the PK of peptides and proteins administered via other delivery routes.

Model-Based Approach to Selecting Pegfilgrastim Dose for Pharmacokinetic and Pharmacodynamic Similarity Studies in Biosimilar Development.

This study applied modeling and simulation (M&S) approaches to evaluate the sensitivity of pegfilgrastim pharmacokinetics (PKs) and pharmacodynamics (PDs) to changes in dose amount, and linear or nonlinear clearance (CL) over pegfilgrastim subcutaneous dose of 2-6 mg. A previously published model was adapted to better describe pegfilgrastim PK and PD data in healthy subjects and used in simulation. Nonlinear CL accounts for 98% and 77%, respectively, of the total CL of pegfilgrastim at 2 and 6 mg. The sensitivity analyses showed: (i) PK of 2 and 6 mg doses are similarly sensitive to detect differences for a 5% change in dose; (ii) PK of 2 mg dose is more sensitive to changes in receptor binding affinity, a model parameter for nonlinear CL, and a product quality attribute characterized with orthogonal methods as part of demonstrating analytical similarity between products; (iii) PK of approved 6 mg dose is more sensitive to changes in linear CL, which has not been associated with any specific product quality attributes, and (iv) the PDs are not sensitive to changes in linear or nonlinear CL. Taken together, our analyses support that the approved pegfilgrastim dose of 6 mg is appropriate for detecting differences between a biosimilar and the reference products in pegfilgrastim PK and PD similarity studies. The described M&S approaches can be adopted to support dose selection for biosimilars with nonlinear PK and complex PK-PD interplay.

Leveraging Clinical Pharmacology Data to Assess Biosimilarity and Interchangeability of Insulin Products.

There is over a hundred years of clinical experience with insulin for the treatment of diabetes. The US Food and Drug Administration (FDA) approved the first insulin biosimilar interchangeable product in 2021 for improving glycemic control in adults and pediatric patients with type 1 diabetes mellitus and in adults with type 2 diabetes mellitus. Several recombinant insulin products are available in the United States, including the recently approved biosimilar insulins. The approval of the biosimilar insulin products was based on comparative analytical characterizations and comparative pharmacokinetic (PK) and pharmacodynamic (PD) data. The primary objective of this review is to discuss the scientific considerations in the demonstration of biosimilarity of a proposed insulin biosimilar to a reference product and the role of clinical pharmacology studies in the determination of biosimilarity and interchangeability. Euglycemic clamp studies are considered a "gold standard" for insulin PK and PD characterization and have been widely used to determine the time-action profiles of rapid-acting, intermediate-acting, and long-acting insulin products. Clinical pharmacology aspects of study design, including selection of appropriate dose, study population, PK, and PD end points, are presented. Finally, the role of clinical pharmacology studies in the interchangeability assessment of insulin and the regulatory pathways used for insulin and the experience with follow-on insulins and the two recently approved biosimilar insulin products is discussed.

A survey of pharmacokinetic bioanalytical methods in biosimilar biological license applications for the assessment of target and antidrug antibody effects.

The presence of circulating targets and antidrug antibodies can influence the ability of a bioanalytical method to measure therapeutic protein (TP) concentration relevant to exposure-response evaluations. This project surveyed biosimilar submissions for their bioanalytical methods. Survey results revealed that 97% of pharmacokinetic methods designed to measure theoretically free or partial-free TPs with respect to target indeed measured free or partial-free TPs when considering experimental testing results for target effects. Antidrug antibody effect is less often evaluated. The observed trend of measuring biologically active forms of TP is consistent with the scientific understanding that pharmacokinetics of biologically active forms is more likely to be relevant to the clinical responses and evaluation of clinically meaningful differences to contribute to biosimilarity assessments.

Systematic Review of Device Parameters and Design of Studies Bridging Biologic-Device Combination Products Using Prefilled Syringes and Autoinjectors.

Biologic-device combination products using prefilled syringes (PFSs) and autoinjectors (AIs) are popular for biological products administered subcutaneously. Pharmacokinetic (PK) comparability studies commonly provide the scientific data to support introduction of AI presentations via bridging with PFS. A survey of biological products approved by FDA's Center for Drug Evaluation and Research identified 17 biologics license applications (BLAs) with both PFS and AI presentations for subcutaneous (SC) administration, including 16 approved on February 1, 2018, and one with AI presentation under review. A systematic review on the device parameters and the PK comparability studies bridging the two presentations was conducted. Subsequently, whether device parameters or the PK study design may have influenced the PK comparability study results was evaluated. The reported device parameters for AI and PFS are generally consistent across BLAs, whereas the approach to assess PK comparability varied, including the study design. Most PK comparability studies met bioequivalence (BE) criteria. Upon inspection of the studies that did not meet BE criteria, injection depth of AI and the injection site for either AI or PFS were identified as potential influencing factors to the outcome of PK comparability study. This study represents an initial attempt to identify the potential influencing factors on device bridging, including the characteristics of the device and the clinical pharmacology study. These findings may inform the combination product development strategy, specifically design considerations for device and PK comparability studies.

Role of Modeling and Simulation in the Development of Novel and Biosimilar Therapeutic Proteins.

Modeling and simulation (M&S) is an important enabler of knowledge integration in novel biological product development programs. Given the volume of data generated from clinical trials and the complexity of pharmacokinetic (PK) and pharmacodynamic (PD) properties for reference products, extending the use of M&S to biosimilar development is logical. Assessing PK and PD similarity is normally a critical part of demonstrating biosimilarity to a reference product. Thoughtful considerations are necessary in study design to minimize the PK and PD variability, thereby increasing the sensitivity for detecting potential differences between products. In addition, the sensitivity of PD biomarkers depends partly on their relevance to the mechanism(s) of action and the dynamic range of PD response(s), including the impact of certain structural differences on PD in the relevant population. As such, opportunities exist for leveraging the available M&S knowledgebase to maximize the efficiency in the design and interpretation of PK and PD similarity studies. This article describes M&S applications which have contributed to and can continue to enhance biosimilar development programs.

Individualized Dosing of Therapeutic Monoclonal Antibodies-a Changing Treatment Paradigm?

The introduction of monoclonal antibodies (mAbs) to the treatment of inflammatory bowel disease (IBD) was an important medical milestone. MAbs have been demonstrated as safe and efficacious treatments of IBD. However, a large percentage of patients either fail to respond initially or lose response to therapy after a period of treatment. Although there are factors associated with poor treatment outcomes in IBD, one cause for treatment failure may be low mAb exposure. Consequently, gastroenterologists have begun using therapeutic drug monitoring (TDM) to guide dose adjustment. However, while beneficial, TDM does not provide sufficient information to effectively adjust doses. The pharmacokinetics (PK) and pharmacodynamics (PD) of mAbs are complex, with numerous factors impacting on mAb PK and PD. The concept of dashboard-guided dosing based on Bayesian PK models allows physicians to combine TDM with factors influencing mAb PK to individualize therapy more effectively. One issue with TDM has been the slow turnaround of assay results, either necessitating an additional clinic visit for a sample or reacting to TDM results at a subsequent, rather than the current, dose. New point-of-care (POC) assays for mAbs are being developed that would potentially allow physicians to determine drug concentration quickly. However, work remains to understand how to determine what target exposure is needed for an individual patient, and whether the combination of POC assays and dashboards presents a safe approach with substantial outcome benefit over the current standard of care.

Evaluating and Reporting the Immunogenicity Impacts for Biological Products--a Clinical Pharmacology Perspective.

Immunogenicity assessment is important for biological products due to potential impacts of immunogenicity on safety and efficacy. We reviewed the prescribing information and the FDA's clinical pharmacology review of 121 approved biological products for evaluating and reporting of immunogenicity data. Of the 121 products, 89% (n = 108) reported the incidence of immunogenicity and 49% (n = 59) reported immunogenicity impact on efficacy. However, only 26% (n = 31) reported whether the immunogenicity affected pharmacokinetics. A subset of 16 products reported effects of anti-drug antibodies (ADA) on both systemic clearance and efficacy; 8 of 16 products had increased systemic clearance coinciding with reduced efficacy, and 6 of 16 products had no changes in either clearance or efficacy. Factors contributing to infrequent reporting of the ADA effect on exposure and methods for determining the effect of ADA on exposure are summarized. Measuring ADA and drug concentrations concurrently over time enables the evaluation of ADA impact on pharmacokinetics. Within-subject comparison of concentration data (before vs. after ADA formation) is a useful alternative to between-subject (ADA+ vs. ADA-) comparison when sample size is limited or when the majority of subjects developed ADA. The biological complexity of immune responses presents challenges to quantifying the ADA impact on pharmacokinetics using model-based methods. Our findings support that pharmacokinetic exposure is more sensitive than efficacy endpoints for evaluating ADA effects. A decrease in drug concentration due to formation of ADA during treatment can serve as an early indicator for potential reduced efficacy occurring at a later time.

Population pharmacokinetic-pharmacodynamic modeling of omecamtiv mecarbil, a cardiac myosin activator, in healthy volunteers and patients with stable heart failure.

Data from 3 clinical trials of omecamtiv mecarbil in healthy volunteers and patients with stable heart failure (HF) were analyzed using a nonlinear mixed-effects model to investigate omecamtiv mecarbil's pharmacokinetics and relationship between plasma concentration and systolic ejection time (SET) and Doppler-derived left ventricular outflow tract stroke volume (LVOTSV). Omecamtiv mecarbil pharmacokinetics were described by a linear 2-compartment model with a zero-order input rate for intravenous administration and first-order absorption for oral administration. Oral absorption half-life was 0.62 hours, and absolute bioavailability was estimated as 90%; elimination half-life was approximately 18.5 hours. Variability in pharmacokinetic parameters was not explained by patient baseline characteristics. Omecamtiv mecarbil plasma concentration was directly correlated with increases in SET and LVOTSV between healthy volunteers and patients with HF. The maximum increase from baseline in SET (delta SET) estimated by an Emax model was 137 milliseconds. LVOTSV increased linearly from baseline by 1.6 mL per 100 ng/mL of omecamtiv mecarbil. Model-based simulations for several immediate-release oral dose regimens (37.5, 50, and 62.5 mg dosed every 8, 12, and 24 hours) showed that a pharmacodynamic effect (delta SET ≥20 milliseconds) could be maintained in the absence of excessive omecamtiv mecarbil plasma concentrations.

Biological products for the treatment of psoriasis: therapeutic targets, pharmacodynamics and disease-drug-drug interaction implications.

Psoriasis is a chronic inflammatory skin disease condition that involves altered expression of a broad spectrum of proinflammatory cytokines which are associated with activation of T cells and proliferation of keratinocytes. Currently approved biological products for psoriasis treatment fall into two main classes: cytokine modulators and biologics targeting T cells. In psoriatic patients, elevated levels of proinflammatory cytokines are observed. Elevated proinflammatory cytokines can suppress some cytochrome P450 (CYP) enzymes, and the treatment of psoriasis with biological products can reduce proinflammatory cytokine levels. Therefore, the exposure of CYP substrate drugs is anticipated to be affected by the psoriasis disease resulting in a higher exposure than in healthy state (named disease-drug interaction) as well as by the biological treatments due to disease improvements resulting in a decrease in exposure (named disease-drug-drug interaction, disease-DDI). However, the quantitative impact on CYP substrate exposure due to disease or due to treatment with biological products remains to be evaluated. The objective of the current review is to provide an overview of the therapeutic targets and cytokine-related pharmacodynamic effects of biological products in psoriasis treatment with a particular focus on their implications for disease-DDI. The clinical study design considerations for psoriasis disease-DDI evaluation are also discussed.

Bioanalytical method validation: concepts, expectations and challenges in small molecule and macromolecule--a report of PITTCON 2013 symposium.

The concepts, importance, and implications of bioanalytical method validation has been discussed and debated for a long time. The recent high profile issues related to bioanalytical method validation at both Cetero Houston and former MDS Canada has brought this topic back in the limelight. Hence, a symposium on bioanalytical method validation with the aim of revisiting the building blocks as well as discussing the challenges and implications on the bioanalysis of both small molecules and macromolecules was featured at the PITTCON 2013 Conference and Expo. This symposium was cosponsored by the American Chemical Society (ACS)-Division of Analytical Chemistry and Analysis and Pharmaceutical Quality (APQ) Section of the American Association of Pharmaceutical Scientists (AAPS) and featured leading speakers from the Food & Drug Administration (FDA), academia, and industry. In this symposium, the speakers shared several unique examples, and this session also provided a platform to discuss the need for continuous vigilance of the bioanalytical methods during drug discovery and development. The purpose of this article is to provide a concise report on the materials that were presented.