Wide-Band Unambiguous Quantum Sensing via Geodesic Evolution.

We present a quantum sensing technique that utilizes a sequence of π pulses to cyclically drive the qubit dynamics along a geodesic path of adiabatic evolution. This approach effectively suppresses the effects of both decoherence noise and control errors while simultaneously removing unwanted resonance terms, such as higher harmonics and spurious responses commonly encountered in dynamical decoupling control. As a result, our technique offers robust, wide-band, unambiguous, and high-resolution quantum sensing capabilities for signal detection and individual addressing of quantum systems, including spins. To demonstrate its versatility, we showcase successful applications of our method in both low-frequency and high-frequency sensing scenarios. The significance of this quantum sensing technique extends to the detection of complex signals and the control of intricate quantum environments. By enhancing detection accuracy and enabling precise manipulation of quantum systems, our method holds considerable promise for a variety of practical applications.

Green Synthesis of Polyurethane Sponge-Grafted Calcium Alginate with Carbon Ink Aerogel with High Water Vapor Harvesting Capacity for Solar-Driven All-Weather Atmospheric Water Harvesting.

Atmospheric water harvesting (AWH) technology is a new strategy for alleviating freshwater scarcity. Adsorbent materials with high hygroscopicity and high photothermal conversion efficiency are the key to AWH technology. Hence, in this study, a simple and large-scale preparation for a hygroscopic compound of polyurethane (PU) sponge-grafted calcium alginate (CA) with carbon ink (SCAC) was developed. The PU sponge in the SCAC aerogel acts as a substrate, CA as a moisture adsorber, and carbon ink as a light adsorber. The SCAC aerogel exhibits excellent water absorption of 0.555-1.40 g·g-1 within a wide range of relative humidity (40-80%) at 25 °C. The SCAC aerogel could release adsorbed water driven by solar energy, and more than 92.17% of the adsorbed water could be rapidly released over a wide solar intensity range of 1.0-2.0 sun. In an outdoor experiment, 57.517 g of SCAC was able to collect 32.8 g of clean water in 6 h, and the water quality meets the drinking water standards set by the World Health Organization. This study suggests a new approach to design promising AWH materials and infers the potential practical application of SCAC aerogel-based adsorbents.

Distribution and spread of tigecycline resistance gene tet(X4) in Escherichia coli from different sources.

Tigecycline serves as a last-resort antimicrobial agent against severe infections caused by multidrug-resistant bacteria. Tet(X) and its numerous variants encoding flavin-dependent monooxygenase can confer resistance to tigecycline, with tet(X4) being the most prevalent variant. This study aims to investigate the prevalence and characterize tigecycline resistance gene tet(X) in E. coli isolates from various origins in Yangzhou, China, to provide insights into tet(X) dissemination in this region. In 2022, we tested the presence of tet(X) in 618 E. coli isolates collected from diverse sources, including patients, pig-related samples, chicken-related samples, and vegetables in Yangzhou, China. The antimicrobial susceptibility of tet(X)-positive E. coli isolates was conducted using the agar dilution method or the broth microdilution method. Whole genome sequencing was performed on tet(X)-positive strains using Illumina and Oxford Nanopore platforms. Four isolates from pig or pork samples carried tet(X4) and exhibited resistance to multiple antimicrobial agents, including tigecycline. They were classified as ST542, ST10, ST761, and ST48, respectively. The tet(X4) gene was located on IncFIA8-IncHI1/ST17 (n=2), IncFIA18-IncFIB(K)-IncX1 (n=1), and IncX1 (n=1) plasmids, respectively. These tet(X4)-carrying plasmids exhibited high similarity to other tet(X4)-bearing plasmids with the same incompatible types found in diverse sources in China. They shared related genetic environments of tet(X4) associated with ISCR2, as observed in the first identified tet(X4)-bearing plasmid p47EC. In conclusion, although a low prevalence (0.65%) of tet(X) in E. coli strains was observed in this study, the horizontal transfer of tet(X4) among E. coli isolates mediated by pandemic plasmids and the mobile element ISCR2 raises great concerns. Thus, heightened surveillance and immediate action are imperative to curb this clinically significant resistance gene and preserve the efficacy of tigecycline.

Two new aromatic tenvermectins from mutant Streptomyces avermitilis HU02-06.

Two new aromatic tenvermectins (TVMs), 13-oleandrosyl-oleandrosyloxy ST906 (1) and aromatic TVM B (2), were isolated from the fermentation broth of Streptomyces avermitilis HU02-06. Their structures were established by extensive spectroscopic analysis, including 1D and 2D NMR and HRESIMS data. Bioassay test showed that these two new tenvermectins exhibited weak nematocidal activity against Bursaphelenchus xylophilus and moderate cytotoxic activity against tumor cell lines HepG2 and HCT116.

PSEUDO-RESPONSE REGULATOR 3b and transcription factor ABF3 modulate abscisic acid-dependent drought stress response in soybean.

The circadian system plays a pivotal role in facilitating the ability of crop plants to respond and adapt to fluctuations in their immediate environment effectively. Despite the increasing comprehension of PSEUDO-RESPONSE REGULATORs (PRRs) and their involvement in the regulation of diverse biological processes, including circadian rhythms, photoperiodic control of flowering, and responses to abiotic stress, the transcriptional networks associated with these factors in soybean (Glycine max (L.) Merr.) remain incompletely characterized. In this study, we provide empirical evidence highlighting the significance of GmPRR3b as a crucial mediator in regulating the circadian clock, drought stress response, and abscisic acid (ABA) signaling pathway in soybeans. A comprehensive analysis of DNA affinity purification sequencing and transcriptome data identified 795 putative target genes directly regulated by GmPRR3b. Among them, a total of 570 exhibited a significant correlation with the response to drought, and eight genes were involved in both the biosynthesis and signaling pathways of ABA. Notably, GmPRR3b played a pivotal role in the negative regulation of the drought response in soybeans by suppressing the expression of abscisic acid responsive element-binding factor 3 (GmABF3). Additionally, the overexpression of GmABF3 exhibited an increased ability to tolerate drought conditions, and it also restored the hypersensitive phenotype of the GmPRR3b overexpressor. Consistently, studies on the manipulation of GmPRR3b gene expression and genome editing in plants revealed contrasting reactions to drought stress. The findings of our study collectively provide compelling evidence that emphasizes the significant contribution of the GmPRR3b-GmABF3 module in enhancing drought tolerance in soybean plants. Moreover, the transcriptional network of GmPRR3b provides valuable insights into the intricate interactions between this gene and the fundamental biological processes associated with plant adaptation to diverse environmental conditions.

Both arthroscopic one-step Broström-Gould and Lasso-loop stitch techniques achieved favourable clinical outcomes for chronic lateral ankle instability.

PURPOSE: Both the arthroscopic Broström-Gould and Lasso-loop stitch techniques are commonly used to treat chronic lateral ankle instability (CLAI). The purpose of this study is to introduce an arthroscopic one-step outside-in Broström-Gould (AOBG) technique and compare the mid-term outcomes of the AOBG technique and Lasso-loop stitch technique. METHODS: All CLAI patients who underwent arthroscopic lateral ankle stabilization surgery in our department from 2018 to 2019 were retrospectively enrolled. The patients were divided into two groups according to the surgical methods employed: the AOBG technique (Group A) and the Lasso-loop technique (Group B). The visual analogue scale pain score, American Orthopaedic Foot and Ankle Society ankle hindfoot score, Tegner activity score and Karlsson-Peterson score were evaluated preoperatively and during the follow-up from June to December 2022. The surgical duration, return to sports, sprain recurrence and surgical complications were also recorded and compared. RESULTS: A total of 74 patients (Group A, n = 42; Group B, n = 32) were included in this study with a mean follow-up of 39 months. No statistically significant differences were observed in demographic parameters or follow-up time between the two groups. Postoperative clinical scores indicated a significant improvement (all with p < 0.001) with no significant difference between the two groups (not significant [n.s.]). There was no significant difference in the surgical duration (46.1 vs. 49.7 min, n.s.), return to sports (92.9% vs. 93.8%, n.s.), or sprain recurrence (4.8% vs. 6.3%, n.s.). Only two cases in Group A reported knot irritation (4.8% vs. 0, n.s.), and one case in Group A experienced local skin numbness (0 vs. 3.1%, n.s.), with no significant difference. CONCLUSION: Both the AOBG and Lasso-loop stitch techniques yielded comparable favourable mid-term outcomes and return to sports with a low rate of surgical complications. Both procedures could be feasible strategies for CLAI patients. LEVEL OF EVIDENCE: Level III.

Persistent Colonization of Ciprofloxacin-Resistant and Extended-Spectrum ß-Lactamase (ESBL)-Producing Salmonella enterica Serovar Kentucky ST198 in a Patient with Inflammatory Bowel Disease.

Objective: Salmonella enterica serovar Kentucky ST198 has emerged as a global threat to humans. In this study, we aimed to characterize the prolonged carriage of ciprofloxacin-resistant and extended-spectrum ß-lactamase (ESBL)-producing S. Kentucky ST198 in a single patient with inflammatory bowel disease (IBD). Methods: Three S. Kentucky strains were collected from a single patient with IBD on 11th January, 23rd January, and 8th February, 2022, respectively. Antimicrobial susceptibility testing, whole-genome sequencing, and phylogenetic analysis with 38 previously described Chinese S. Kentucky ST198 strains from patients and food were performed. Results: All three S. Kentucky isolates belonged to ST198. They carried identical 16 resistance genes, such as blaCTX-M-55, tet(A), and qnrS1, and had identical mutations within gyrA (S83F and D87N) and parC (S80I). Therefore, they exhibited identical multidrug-resistant profiles, including the clinically important antibiotics cephalosporins (ceftazidime and cefepime), fluoroquinolones (ciprofloxacin and levofloxacin), and third-generation tetracycline (tigecycline). Our three S. Kentucky strains were classified into the subclade ST198.2-2, and were genetically identical (2-6 SNPs) to each other. They exhibited a close genetic similarity (15-20 SNPs) to the isolate NT-h3189 from a patient and AH19MCS1 from chicken meat in China, indicating a possible epidemiological link between these S. Kentucky ST198 isolates from the patients and chicken meat. Conclusion: Long-term colonization of ciprofloxacin-resistant and ESBL-producing S. Kentucky ST198 in a single patient is a matter of concern. Due to the potential transfer of S. Kentucky ST198 from food sources to humans, ongoing surveillance of this particular clone in animals, animal-derived food products, and humans should be strengthened.

RNA splicing modulates the postharvest physiological deterioration of cassava storage root.

Rapid postharvest physiological deterioration (PPD) of cassava (Manihot esculenta Crantz) storage roots is a major constraint that limits the potential of this plant as a food and industrial crop. Extensive studies have been performed to explore the regulatory mechanisms underlying the PPD processes in cassava to understand their molecular and physiological responses. However, the exceptional functional versatility of alternative splicing (AS) remains to be explored during the PPD process in cassava. Here, we identified several aberrantly spliced genes during the early PPD stage. An in-depth analysis of AS revealed that the abscisic acid (ABA) biosynthesis pathway might serve as an additional molecular layer in attenuating the onset of PPD. Exogenous ABA application alleviated PPD symptoms through maintaining ROS generation and scavenging. Interestingly, the intron retention transcript of MeABA1 (ABA DEFICIENT 1) was highly correlated with PPD symptoms in cassava storage roots. RNA yeast three-hybrid and RNA immunoprecipitation assays showed that the serine/arginine-rich protein MeSCL33 (SC35-like splicing factor 33) binds to the precursor mRNA of MeABA1. Importantly, overexpressing MeSCL33 in cassava conferred improved PPD resistance by manipulating the AS and expression levels of MeABA1 and then modulating the endogenous ABA levels in cassava storage roots. Our results uncovered the pivotal role of the ABA biosynthesis pathway and RNA splicing in regulating cassava PPD resistance and proposed the essential roles of MeSCL33 for conferring PPD resistance, broadening our understanding of SR proteins in cassava development and stress responses.

Effects of stand ages on soil enzyme activities in Chinese fir plantations and natural secondary forests.

Forest type and stand age are important biological factors affecting soil enzyme activities. However, the changes in soil enzyme activities across stand ages and underlying mechanisms under the two forest restoration strate-gies of plantations and natural secondary forests remain elusive. In this study, we investigated the variations of four soil enzyme activities including cello-biohydrolase (CBH), ß-1,4-glucosidase (ßG), acid phosphatase (AP) and ß-1,4-N-acetylglucosaminidase (NAG), which were closely associated with soil carbon, nitrogen, and phosphorus cycling, across Cunninghamia lanceolata plantations and natural secondary forests (5, 8, 21, 27 and 40 years old). The results showed that soil enzyme activities showed different patterns across different forest types. The acti-vities of AP, ßG and CBH in the C. lanceolata plantations were significantly higher than those in the natural secon-dary forests, and there was no significant difference in the NAG activity. In the plantations, AP activity showed a decreasing tendency with the increasing stand ages, with the AP activity in the 5-year-old plantations significantly higher than other stand ages by more than 62.3%. The activities of NAG and CBH decreased first and then increased, and ßG enzyme activity fluctuated with the increasing stand age. In the natural secondary forests, NAG enzyme activity fluctuated with the increasing stand age, with that in the 8-year-old and 27-year-old stand ages being significantly higher than the other stand ages by more than 14.9%. ßG and CBH enzyme activities increased first and then decreased, and no significant difference was observed in the AP activity. Results of the stepwise regression analyses showed that soil predictors explained more than 34% of the variation in the best-fitting models predicting soil enzyme activities in the C. lanceolata plantations and natural secondary forests. In conclusion, there would be a risk of soil fertility degradation C. lanceolata plantations with the increasing stand age, while natural secondary forests were more conducive to maintaining soil fertility.

Palladium-Catalyzed Directed Carbon-Carbon Bond Activation of Aryl Nitriles for Cyano Transfer.

Herein, we report the C-H cyanation of indoles via a palladium-catalyzed directed C-CN activation reaction using aryl nitrile as a cyano source. The employment of the phenoxy-oriented group is the key to the cleavage of the C-CN bond. This protocol features a broad substrate scope, good efficiency, and high regioselectivity. Furthermore, the practical application of this protocol was showcased in the late-stage functionalization and synthesis of indole derivatives, which were derived from drugs and natural products, through the process of cyanation.

Influence of intraoral scanning coverage on the accuracy of digital implant impressions - An in vitro study.

OBJECTIVES: To evaluate the influence of intraoral scanning coverage (IOSC) on digital implant impression accuracy in various partially edentulous situations and predict the optimal IOSC. METHODS: Five types of resin models were fabricated, each simulating single or multiple tooth loss scenarios with inserted implants and scan bodies. IOSC was subgrouped to cover two, four, six, eight, ten, and twelve teeth, as well as full arch. Each group underwent ten scans. A desktop scanner served as the reference. Accuracy was evaluated by measuring the Root mean square error (RMSE) values of scan bodies. A convolutional neural network (CNN) was trained to predict the optimal IOSC with different edentulous situations. Statistical analysis was performed using one-way ANOVA and Tukey's test. RESULTS: For single-tooth-missing situations, in anterior sites, significantly better accuracy was observed in groups with IOSC ranging from four teeth to full arch (p < 0.05). In premolar sites, IOSC spanning four to six teeth were more accurate (p < 0.05), while in molar sites, groups with IOSC encompassing two to eight teeth exhibited better accuracy (p < 0.05). For multiple-teeth-missing situations, IOSC covering four, six, and eight teeth, as well as full arch showed better accuracy in anterior gaps (p < 0.05). In posterior gaps, IOSC of two, four, six or eight teeth were more accurate (p < 0.05). The CNN predicted distinct optimal IOSC for different edentulous scenarios. CONCLUSIONS: Implant impression accuracy can be significantly impacted by IOSC in different partially edentulous situations. The selection of IOSC should be customized to the specific dentition defect condition. CLINICAL SIGNIFICANCE: The number of teeth scanned can significantly affect digital implant impression accuracy. For missing single or four anterior teeth, scan at least four or six neighboring teeth is acceptable. In lateral cases, two neighboring teeth may suffice, but extending over ten teeth, including contralateral side, might deteriorate the scan.

Identification of the domestication gene GmCYP82C4 underlying the major quantitative trait locus for the seed weight in soybean.

KEY MESSAGE: A major quantitative trait locus (QTL) for the hundred-seed weight (HSW) was identified and confirmed in the two distinct soybean populations, and the target gene GmCYP82C4 underlying this locus was identified that significantly associated with soybean seed weight, and it was selected during the soybean domestication and improvement process. Soybean is a major oil crop for human beings and the seed weight is a crucial goal of soybean breeding. However, only a limited number of target genes underlying the quantitative trait loci (QTLs) controlling seed weight in soybean are known so far. In the present study, six loci associated with hundred-seed weight (HSW) were detected in the first population of 573 soybean breeding lines by genome-wide association study (GWAS), and 64 gene models were predicted in these candidate QTL regions. The QTL qHSW_1 exhibits continuous association signals on chromosome four and was also validated by region association study (RAS) in the second soybean population (409 accessions) with wild, landrace, and cultivar soybean accessions. There were seven genes in qHSW_1 candidate region by linkage disequilibrium (LD) block analysis, and only Glyma.04G035500 (GmCYP82C4) showed specifically higher expression in flowers, pods, and seeds, indicating its crucial role in the soybean seed development. Significant differences in HSW trait were detected when the association panels are genotyped by single-nucleotide polymorphisms (SNPs) in putative GmCYP82C4 promoter region. Eight haplotypes were generated by six SNPs in GmCYP82C4 in the second soybean population, and two superior haplotypes (Hap2 and Hap4) of GmCYP82C4 were detected with average HSW of 18.27 g and 18.38 g, respectively. The genetic diversity of GmCYP82C4 was analyzed in the second soybean population, and GmCYP82C4 was most likely selected during the soybean domestication and improvement process, leading to the highest proportion of Hap2 of GmCYP82C4 both in landrace and cultivar subpopulations. The QTLs and GmCYP82C4 identified in this study provide novel genetic resources for soybean seed weight trait, and the GmCYP82C4 could be used for soybean molecular breeding to develop desirable seed weight in the future.

Identification of GmPT proteins and investigation of their expressions in response to abiotic stress in soybean.

MAIN CONCLUSION: Investigation the expression patterns of GmPT genes in response to various abiotic stresses and overexpression of GmPT11 in soybean hairy roots and Arabidopsis exhibited hypersensitivity to salt stress. Soybean is considered to be one of the significant oil crops globally, as it offers a diverse range of essential nutrients that contribute to human health. Salt stress seriously affects the yield of soybean through negative impacts on the growth, nodulation, reproduction, and other agronomy traits. The phosphate transporters 1(PHT1) subfamily, which is a part of the PHTs family in plants, is primarily found in the cell membrane and responsible for the uptake and transport of phosphorus. However, the role of GmPT (GmPT1-GmPT14) genes in response to salt stress has not been comprehensively studied. Here, we conducted a systematic analysis to ascertain the distribution and genomic duplications of GmPT genes, as well as their expression patterns in response to various abiotic stresses. Promoter analysis of GmPT genes revealed that six stress-related cis-elements were enriched in these genes. The overexpression of GmPT11 in soybean hairy roots and Arabidopsis exhibited hypersensitivity to salt stress, while no significant change was observed under low phosphate treatment, suggesting a crucial role in the response to salt stress. These findings provide novel insights into enhancing plant tolerance to salt stress.

Palladium-Catalyzed Deuteration of Arylketone Oxime Ethers.

We report herein the development of palladium-catalyzed deacylative deuteration of arylketone oxime ethers. This protocol features excellent functional group tolerance, heterocyclic compatibility, and high deuterium incorporation levels. Regioselective deuteration of some biologically important drugs and natural products are showcased via Friedel-Crafts acylation and subsequent deacylative deuteration. Vicinal meta-C-H bond functionalization (including fluorination, arylation, and alkylation) and para-C-H bond deuteration of electro-rich arenes are realized by using the ketone as both directing group and leaving group, which is distinct from aryl halide in conventional dehalogenative deuteration.

LncRNA DANA1 promotes drought tolerance and histone deacetylation of drought responsive genes in Arabidopsis.

Although many long noncoding RNAs have been discovered in plants, little is known about their biological function and mode of action. Here we show that the drought-induced long intergenic noncoding RNA DANA1 interacts with the L1p/L10e family member protein DANA1-INTERACTING PROTEIN 1 (DIP1) in the cell nucleus of Arabidopsis, and both DANA1 and DIP1 promote plant drought resistance. DANA1 and DIP1 increase histone deacetylase HDA9 binding to the CYP707A1 and CYP707A2 loci. DIP1 further interacts with PWWP3, a member of the PEAT complex that associates with HDA9 and has histone deacetylase activity. Mutation of DANA1 enhances CYP707A1 and CYP707A2 acetylation and expression resulting in impaired drought tolerance, in agreement with dip1 and pwwp3 mutant phenotypes. Our results demonstrate that DANA1 is a positive regulator of drought response and that DANA1 works jointly with the novel chromatin-related factor DIP1 on epigenetic reprogramming of the plant transcriptome during the response to drought.

Enhancing Sodium-Ion Transport by Hollow Nanotube Structure Design of a V5S8@C Anode for Sodium-Ion Batteries.

V5S8 has received extensive attention in the field of sodium-ion batteries (SIBs) due to its two-dimensional (2D) layered structure, and weak van der Waals forces between V-S accelerate the transport of sodium ions. However, the long-term cycling of V5S8 still suffers from volume expansion and low conductivity. Herein, a hollow nanotube V5S8@C (H-V5S8@C) with improved conductivity was synthesized by a solvothermal method to alleviate cracking caused by volume expansion. Benefiting from the large specific surface area of the hollow nanotube structure and uniform carbon coating, H-V5S8@C exhibits a more active site and enhanced conductivity. Meanwhile, the heterojunction formed by a few residual MoS2 and the outer layer of V5S8 stabilizes the structure and reduces the ion migration barrier with fast Na+ transport. Specifically, the H-V5S8@C anode provides an enhanced rate performance of 270.1 mAh g-1 at 15 A g-1 and high cycling stability of 291.7 mAh g-1 with a retention rate of 90.98% after 300 cycles at 5 A g-1. This work provides a feasible approach for the structural design of 2D layered materials, which can promote the practical application of fast-charging sodium-ion batteries.

Low prevalence of mcr-1 in Escherichia coli from food-producing animals and food products in China.

BACKGROUND: mcr-1-positive Escherichia coli has emerged as a significant threat to human health, veterinary health, and food safety in recent years. After the prohibition of colistin as a feed additive in animal husbandry in China, a noticeable reduction in both colistin resistance and the prevalence of mcr-1 was observed in E. coli from animals and humans. OBJECTIVES: To assess the prevalence of the colistin resistance gene mcr-1 and characterize its genetic context in E. coli strains derived from fecal and meat samples from food-producing animals in China. METHODS: A total of 1,353 fecal samples and 836 food samples were collected between 2019 and 2020 in China. E. coli isolates were identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and their susceptibility to colistin were determined using the broth microdilution method. The colistin-resistant E. coli isolates were screened for the presence of mcr by PCR analysis and sequencing. The minimal inhibitory concentrations (MICs) of 15 antimicrobial agents against the mcr-1-positive strains were further tested using the agar dilution method, conjugation assays were performed, and whole genome sequencing was performed using Illumina HiSeq. RESULTS: In total, 1,403 E. coli strains were isolated. Thirteen isolates from chicken meat (n = 7), chickens (n = 3), and pigs (n = 3) were resistant to colistin with MIC values of 4 to 16 mg/L, and carried mcr-1. All mcr-1-positive strains, except for isolate AH20PE105, contained multiple resistance genes and exhibited multidrug-resistant phenotypes. They belonged to 10 sequence types (STs), including a novel ST (ST14521). mcr-1 was located on IncI2 (n = 9), IncX4 (n = 2), and IncHI2 (n = 2) plasmids, which were highly similar to other mcr-1-carrying plasmids sharing the same incompatibility type. Seven mcr-1-carrying plasmids could be successfully conjugally transferred to E. coli C600. CONCLUSIONS: While the low prevalence of mcr-1 (0.93%) identified in this study may not immediately seem alarming, the very emergence of this gene merits attention given its implications for colistin resistance and public health. Hence, ongoing surveillance of mcr-1 in E. coli remains crucial.

A novel natural variation in the promoter of GmCHX1 regulates conditional gene expression to improve salt tolerance in soybean.

Identification and characterization of soybean germplasm and gene(s)/allele(s) for salt tolerance is an effective way to develop improved varieties for saline soils. Previous studies identified GmCHX1 (Glyma03g32900) as a major salt tolerance gene in soybean, and two main functional variations were found in the promoter region (148/150 bp insertion) and the third exon with a retrotransposon insertion (3.78 kb). In the current study, we identified four salt-tolerant soybean lines, including PI 483460B (Glycine soja), carrying the previously identified salt-sensitive variations at GmCHX1, suggesting new gene(s) or new functional allele(s) of GmCHX1 in these soybean lines. Subsequently, we conducted quantitative trait locus (QTL) mapping in a recombinant-inbred line population (Williams 82 (salt-sensitive) × PI 483460B) to identify the new salt tolerance loci/alleles. A new locus, qSalt_Gm18, was mapped on chromosome 18 associated with leaf scorch score. Another major QTL, qSalt_Gm03, was identified to be associated with chlorophyll content ratio and leaf scorch score in the same chromosomal region of GmCHX1 on chromosome 3. Novel variations in a STRE (stress response element) cis-element in the promoter region of GmCHX1 were found to regulate the salt-inducible expression of the gene in these four newly identified salt-tolerant lines including PI 483460B. This new allele of GmCHX1 with salt-inducible expression pattern provides an energy cost efficient (conditional gene expression) strategy to protect soybean yield in saline soils without yield penalty under non-stress conditions. Our results suggest that there might be no other major salt tolerance locus similar to GmCHX1 in soybean germplasm, and further improvement of salt tolerance in soybean may rely on gene-editing techniques instead of looking for natural variations.

Comparison of different internal fixation models in ankle arthrodesis using 3D finite-element analysis.

BACKGROUND: The purpose of this study is to use three-dimensional finite-element analysis to better understand the biomechanical features of various internal fixators for ankle arthrodesis. METHODS: We used finite-element analysis to compare four different types of internal fixations in ankle arthrodesis: Group A had three crossed screws (Ø6.5 mm); Group B had two crossed screws (Ø6.5 mm) and an anterior plate (Ø2.7 mm); Group C only had an anterior anatomical plate (Ø3.5 mm); Group D had one anterior anatomical plate (Ø3.5 mm) and one posterior-lateral screw (Ø6.5 mm). We adopted Ansys 21.0 software to analyze and compare the four types in terms of the displacement of the arthrodesis surface and the stress peak and stress distribution of these models under intorsion, extorsion, dorsiflexion torque, and neutral vertical load. RESULTS: ① Displacement of the arthrodesis surface: In Group A, the maximum displacement was larger than Group D under neutral vertical load and dorsiflexion torque but less than it under intorsion and extorsion torque. In Group B, the maximum displacement against dorsiflexion, neutral vertical load, intorsion, and extorsion was less than that in the other three fixation models. In Group C, the maximum displacement against the above four loading patterns were significantly higher than that in another three fixation models. ② Stress peak and stress distribution: based on the stress distribution of the four models, the peak von Mises stress was concentrated in the central sections of the compression screws, plate joints, and bending parts of the plates. CONCLUSIONS: The fixation model consisting of two crossed screws and an anterior outperformed the other three fixation models in terms of biomedical advantages; thus, this model can be deemed a safe and reliable internal fixation approach for ankle arthrodesis.