Enzyme-Assisted Amplification and Copper Nanocluster Fluorescence Signal-Based Method for miRNA-122 Detection.

At present, a large number of studies have demonstrated that miRNAs can be used as biological indicators for the diagnosis and treatment of diseases such as tumours and cancer, so it is important to develop a new miRNA detection platform. In this work, miRNA-122 is used as the basis for targeting detection agents. We have designed an unlabelled DNA1 that undergoes partial hybridisation and has a 20 T base long strand. The fluorescent signal in this experiment is derived from copper nanoclusters (CuNCs) generated on the circular T-long strand of DNA1. At the same time, DNA1 is able to react with miRNA-122 and achieve hydrolysis of the part bound to miRNA-122 via the action of nucleic acid exonuclease III (Exo III), leaving a part of the DNA, called DNA3, while releasing miRNA-122 to participate in the next reaction, thus achieving circular amplification. DNA3 is able to react with DNA2, which is bound to streptavidin magnetic beads (SIBs) and separated from the reaction solution via the application of a magnetic field. Overall, this is a fluorescence signal reduction experiment, and the strength of the fluorescence signal from the copper nanoclusters can determine whether the target miRNA-122 is present or not. The degree of fluorescence reduction indicates how much DNA1, and thus the amount of target miRNA-122, has been hydrolysed. By evaluating the variations in the fluorescence signal under optimised conditions, we discovered that this method has good sensitivity, with a detection limit as low as 0.46 nM, better than many other previous works on fluorescence signal-based biosensors for miRNA detection. This technique offers high discrimination and selectivity and can serve as a persuasive reference for early diagnosis.

Gold Nanoparticle-Based Enzyme-Assisted Cyclic Amplification for the Highly-Sensitive Detection of miRNA-21.

Because microRNAs (miRNAs) are biological indicators for the diagnosis, treatment, and monitoring of tumors, cancers, and other diseases, it is significant to develop a rapid, sensitive, and reliable miRNA detection platform. In this study, based on miRNA-21 detection, DNA-a with a 3' end overhang and Texas Red fluorophore-labeled 5' end was designed, which reacts with miRNA-21 and hybridizes with exonuclease III (Exo III), where the part connected to miRNA-21 is hydrolyzed, leaving a-DNA. At the same time, miRNA-21 is released to participate in the following reaction, to achieve cyclic amplification. a-DNA reacts with DNA-b conjugated to gold nanoparticles to achieve fluorescence quenching, with the quenching value denoted as F; additionally, after adding DNA-d and linked streptavidin immunomagnetic beads (SIBs), fluorescence recovery was achieved using DNA-c, with the recovered fluorescence recorded as F0. By comparing the difference in the fluorescence (F0 - F) between the two experiments, the amount of DNA-a hydrolyzed to produce a-DNA was established to determine the target miRNA-21 content. Under optimized conditions, by comparing the changes in the fluorescence signal, the developed strategy shows good sensitivity and repeatability, with a detection limit of 18 pM, good discriminative ability and selectivity, and promise for the early diagnosis of breast and intestinal cancers.

APTES-Modified Remote Self-Assembled DNA-Based Electrochemical Biosensor for Human Papillomavirus DNA Detection.

High-risk human papillomavirus (HPV) infection is an important cause of cervical cancer formation; therefore, being able to detect high-risk HPV (e.g., HPV-16) is important for the early treatment and prevention of cervical cancer. In this study, a combination of a 3-aminopropyltriethoxysilane (APTES) modified gold electrode and a super sandwich structure was creatively developed, resulting in the development of a biosensor that is both sensitive and stable for the detection of HPV-16. The electrochemical biosensor possesses a lower detection limit compared with previous studies with an LOD of 5.475 × 10-16 mol/L and it possesses a wide linear range from 1.0 × 10-13 mol/L to 1.0 × 10-6 mol/L (R2 = 0.9923) for the target DNA. The experimental data show that the sensor has good stability, and there is no significant decrease in the current response value after 7 days in the low-temperature environment. In addition, the sensor proved to be a powerful clinical tool for disease diagnosis because it showed good interference resistance in complex human serum samples.

Self-synthesized TiO2 nanoparticles-pH-mediated dispersive solid phase extraction coupled with high performance liquid chromatography for the determination of quinolones in biological matrices.

A simple and efficient pH-mediated dispersive solid phase extraction (dSPE) based on terbium doped titanium dioxide nanoparticles (TiO2-Tb NPs) combined with high performance liquid chromatography (HPLC) has been firstly developed for the determination of quinolones (QNs) in various biological samples. The adsorption kinetics and isotherms were investigated to indicate that the kinetic and equilibrium adsorption were well-described by pseudo-second order kinetic and Henry, Langmuir isotherm model, respectively. The parameters influencing the extraction performance were systematically investigated. The QNs are transferred into TiO2-Tb NPs in the first step at pH = 6.0 and eluted into acidic aqueous phase at pH = 2.5 in the second step. Under the optimum extraction and determination conditions, a linearity range with the coefficient of determination (R2) from 0.9977 to 0.9991 were obtained in a range of 10-10,000 ng mL-1. The limits of detection (LODs) based on a signal-to-noise ratio of 3 were 3.3 ng mL-1. The recoveries of the three QNs in human urine, rabbit plasma and serum samples ranged from 69.3% to 117.6%, with standard deviations ranging from 2.4% to 9.9%. Therefore, this pH-mediated dSPE-HPLC method exhibited the advantages of remarkable sensitivity, ease of operation, rapidity, low cost and environmental friendliness.

Chaperone Copolymer Assisted G-Quadruplex-Based Signal Amplification Assay for Highly Sensitive Detection of VEGF.

Vascular endothelial growth factor (VEGF) is a critical biomarker in the angiogenesis of several cancers. Nowadays, novel approaches to rapid, sensitive, and reliable VEGF detection are urgently required for early cancer diagnosis. Cationic comb-type copolymer, poly(L-lysine)-graft-dextran (PLL-g-Dex) accelerates DNA hybridization and chain exchange reaction while stabilizing the DNA assembly structure. In this work, we examined the chaperone activity of PLL-g-Dex to assist G-quadruplex-based fluorescent DNA biosensors for sensitive detection of VEGF. This convenient and effective strategy is based on chitosan hydrogel, c-myc, Thioflavin T (ThT), VEGF aptamer, and its partially complementary strand. The results show that chaperone copolymer PLL-g-Dex significantly promotes the accumulation of G-quadruplex and assembles into G-wires, allowing an effective signal amplification. Using this method, the detection limit of VEGF was as low as 23 pM, better than many previous works on aptamer-based VEGF detection. This chaperone copolymer-assisted signal amplification strategy has potential applications in the highly sensitive detection of target proteins, even including viruses.

Signal-On Fluorescence Biosensor for Highly Sensitive Detection of miRNA-21 Based on DNAzyme Assisted Double-Hairpin Molecular Beacon.

Although miRNAs exist in small quantities in the human body, they are closely related to the abnormal expression of genes in diseases such as tumors. Therefore, sensitive detection of miRNAs is very important for the prevention and treatment of various tumors and major diseases. The purpose of this study is to develop a label-free sensing strategy based on the co-action of double-hairpin molecular beacons and deoxyribozymes (DNAzymes) for highly sensitive detection of miRNA-21. The target miRNA-21 promotes the assembly of DNAzyme with a complete catalytic core region. At the presence of Mg2+, DNAzyme cuts a substrate into short chains, which open the double hairpin molecular beacon, and then form G-quadruplexs at both ends, specifically binding more ThT to generate a amplified fluorescent signal. The cut substrate will be replaced by the uncut ones in the next stage, increasing the concentration of reactants, and thus further improving the fluorescence intensity. This DNAzyme assisted double hairpin molecular beacon has a certain degree of discrimination for substances with single base mismatches, and the detection limit of miRNA-21 is 0.13 pM, lower than that of the many other analysis. Further, this detection has good selectivity and sensitivity in serum. Therefore, this strategy provides a simple, fast and low-cost platform for the sensitive detection of miRNA-21, having potential applications in early cancer diagnosis.

Preparation and photocatalytic application of terbium and sulfur co-doped titanium nanomaterials.

Titanium-based nanomaterials co-doped with terbium (Tb) and sulfur (S) were synthesized by sol-gel method via a facile step. Physicochemical properties of the resulting composites were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), X-ray photo-electron spectroscopy (XPS) and UV-Vis diffused reflectance spectroscopy (DRS). Methylene blue (MB) was used as a degradation target for evaluating the photocatalytic performance. The factors which influence the photocatalytic activity were investigated, including calcined temperatures and S doping amount. Tb, S (2 wt%) co-doped TiO2 composite calcined at 500 °C exhibited the highest photocatalytic activity with a degradation rate of 72.4% in 3 h. The reaction constant was 0.11529, 0.26025, 0.35038 and 0.41462 h-1 for undoped TiO2, Tb-doped TiO2, S-doped TiO2 and Tb, S co-doped TiO2, respectively. Importantly, the synergistic effect of terbium and sulfur dopants was profoundly discussed. Furthermore, recycling tests and acute toxicity experiments were carried out to confirm the reusability and biosafety of Tb, S co-doped TiO2.

Surface-Induced Desolvation of Hydronium Ion Enables Anatase TiO2 as an Efficient Anode for Proton Batteries.

Hydrogen ion is an attractive charge carrier for energy storage due to its smallest radius. However, hydrogen ions usually exist in the form of hydronium ion (H3O+) because of its high dehydration energy; the choice of electrode materials is thus greatly limited to open frameworks and layered structures with large ionic channels. Here, the desolvation of H3O+ is achieved by using anatase TiO2 as anodes, enabling the H+ intercalation with a strain-free characteristic. Density functional theory calculations show that the desolvation effects are dependent on the facets of anatase TiO2. Anatase TiO2 (001) surface, a highly reactive surface, impels the desolvation of H3O+ into H+. When coupled with a MnO2 cathode, the proton battery delivers a high specific energy of 143.2 Wh/kg at an ultrahigh specific power of 47.9 kW/kg. The modulation of the interactions between ions and electrodes opens new perspectives for battery optimizations.

Rapid preparation of terbium-doped titanium dioxide nanoparticles and their enhanced photocatalytic performance.

Further applications of photocatalysis were limited by the high recombination probability of photo-induced electron-hole pairs in traditional titanium dioxide nanoparticles (TiO2 NPs). Herein, we modified them with rare earth metal via a facile sol-gel method, using tetrabutyl titanate as a precursor and terbium (III) nitrate hexahydrate as terbium (Tb) source. The resulting samples with different Tb doping amounts (from 0 to 2%) have been characterized by X-ray diffraction, UV-visible diffuse reflectance spectroscopy, X-ray photo-electron spectroscopy and a scanning electron microscope. The photocatalytic performance of Tb-doped TiO2 was evaluated by the degradation of methylene blue. The effects of Tb doping amount and initial pH value of solution were investigated in detail. The composite with Tb doping amount of 1.0 wt% showed the highest photocatalytic performance. It exhibited approximately three times enhancement in photocatalytic activity with a reaction rate constant of 0.2314 h-1 when compared with that of commercial P25 (0.0827 h-1). In addition, it presented low toxicity on zebrafishes with 96 h-LC50 of 23.2 mg l-1, and has been proved to be reusable for at least four cycles without significant loss of photocatalytic activity. A probable photocatalytic mechanism of Tb-doped TiO2 was proposed according to the active species trapping experiments. The high photocatalytic performance, excellent reusability and low toxicity of Tb-doped TiO2 indicated that it is a promising candidate material in the future treatment of dye wastewater.