Synthesis of flower-like ZnO nanoparticles for label-free point of care detection of carcinoembryonic antigen.

In this work, flower-like ZnO nanoparticles (ZnONPs) were synthesized using zinc nitrate (Zn(NO3)2 6H2O) as a precursor with KOH. The morphology of the ZnONPs was controlled by varying the synthesis temperature at 50, 75 and 95 °C. The morphology and structure of ZnONPs were characterized using Scanning Electron Microscopy, and X-Ray Diffraction and Brunauer-Emmett Teller analysis. ZnONPs were successfully synthesized by a simple chemical precipitation method. A synthesis temperature of 75 °C produced the most suitable flower-like ZnONPs, which were combined with graphene nanoplatelets to develop a label-free electrochemical immunosensor for the detection of the colon cancer biomarker carcinoembryonic antigen in human serum. Under optimum conditions, the developed immunosensor showed a linear range of 0.5-10.0 ng mL-1 with a limit of detection of 0.44 ng mL-1. The label-free electrochemical immunosensor exhibited good selectivity, reproducibility, and repeatability, and recoveries were excellent. The immunosensor is used with a Near-Field Communication potentiostat connected to a smartphone to facilitate point-of-care cancer detection in low-resource locations.

A portable electrochemical immunosensor for ovarian cancer uses hierarchical microporous carbon material from waste coffee grounds.

A simple label-free electrochemical immunosensor for ovarian cancer (OC) detection was developed using a hierarchical microporous carbon material fabricated from waste coffee grounds (WCG). The analysis method exploited near-field communication (NFC) and a smartphone-based potentiostat. Waste coffee grounds were pyrolyzed with potassium hydroxide and used to modify a screen-printed electrode. The modified screen-printed electrode was decorated with gold nanoparticles (AuNPs) to capture a specific antibody. The modification and immobilization processes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The sensor had an effective dynamic range of 0.5 to 50.0 U mL-1 of cancer antigen 125 (CA125) tumor marker with a correlation coefficient of 0.9995. The limit of detection (LOD) was 0.4 U mL-1. A comparison of the results obtained from human serum analysis with the proposed immunosensor and the results obtained from the clinical method confirmed the accuracy and precision of the proposed immunosensor.

Electrochemical sensor based on molecularly imprinted polymer cryogel and multiwalled carbon nanotubes for direct insulin detection.

Insulin is the polypeptide hormone that regulates blood glucose levels. It is used as an indicator of both types of diabetes. An electrochemical insulin sensor was developed using a gold electrode modified with carboxylated multiwalled carbon nanotubes (f-MWCNTs) and molecularly imprinted polymer (MIP) cryogel. The MIP provided specific recognition sites for insulin, while the macropores of the cryogel promoted the mass transfer of insulin to the recognition sites. The f-MWCNTs increased the effective surface area and conductivity of the sensor and also reduced the potential required to oxidize insulin. Insulin oxidation was directly measured in a flow system using square wave voltammetry. This MIP cryogel/f-MWCNTs sensor provided a linear range of 0.050-1.40 pM with a very low limit of detection (LOD) of 33 fM. The sensor exhibited high selectivity and long-term stability over 10 weeks of dry storage at room temperature. The results of insulin determination in human serum using the sensor compared well with the results of the Elecsys insulin assay. The developed MIP sensor offers a promising alternative for the diagnosis and treatment of diabetes.

Electrochemical Impedimetric Study of Non-Watson-Crick Base Pairs of DNA.

Electrochemical impedance spectroscopy (EIS) was used to detect non-Watson-Crick base pairs of DNA. Thiol-modified DNA as a probe and mercaptohexanol (MCH) were co-immobilized to form a DNA/MCH mixed self-assembled monolayer on a gold electrode surface and then hybridized with complementary DNAs. The DNA layers were measured by the EIS method and interpreted by equivalent circuits. Every terminal base mismatch of the DNA duplex brought about an increase in the charge-transfer resistance (Rct), unlike the case with a fully matched DNA duplex. The value of Rct was highly sensitive to the number of base mismatches for both unpaired and overhang DNA at the terminal. For internal base mismatches, however, no significant increase in Rct was observed. These experimental results proved that the charge transfer of redox molecules to the electrode surface is largely hindered by an end fraying motion due to base unpairing and dangling overhang. EIS was able to detect these steric properties of DNA strands. Furthermore, an electrode modified with G-quadruplex (G4) DNA demonstrated the influences of bulkiness and loop structure on the accessibility of the redox probe to the electrode.

Magnetic microsphere sorbent on CaCO3 templates: Simple synthesis and efficient extraction of trace carbamate pesticides in fresh produce.

Polypyrrole magnetic microspheres were synthesized and used to extract carbaryl, carbofuran, and methomyl before analysis by a high-performance liquid chromatography with diode array detection. Under optimal conditions, four times the preconcentration was achieved with the use of only 1.2 mL of sample. Good linearity with ranges of 3.0-7.5 × 103, 6.0-4.5 × 103, and 15-3.0 × 103 ng kg-1 and limits of detection of 1.37 ± 0.10, 4.7 ± 1.2, and 10.1 ± 5.7 ng kg-1 were obtained, respectively. Good reproducibility (RSDs < 5%) was achieved over 24 cycles of extraction and regeneration. Good accuracy (recoveries 81.6 ± 1.5%-108.3 ± 2.2%) and good precision (RSDs 0.11%-4.5%) were obtained. Carbaryl was detected in apple (2.75 ± 0.23 ng kg-1), carbofuran in tomato (11.34 ± 0.61 ng kg-1), and methomyl in watermelon (34.7 ± 1.7 ng kg-1). The relative expanded uncertainty of the measurement method was less than 14% for all three pesticides.

Printable Heterostructured Bioelectronic Interfaces with Enhanced Electrode Reaction Kinetics by Intermicroparticle Network.

Printable organic bioelectronics provide a fast and cost-effective approach for the fabrication of novel biodevices, while the general challenge is to achieve optimized reaction kinetics at multiphase boundaries between biomolecules and electrodes. Here, we present an entirely new concept based on a modular approach for the construction of heterostructured bioelectronic interfaces by using tailored functional "biological microparticles" combined with "transducer microparticles" as modular building blocks. This approach offers high versatility for the design and fabrication of bioelectrodes with a variety of forms of interparticle spatial organization, from layered-structures to more advance bulk heterostructured architectures. The heterostructured biocatalytic electrodes delivered twice the reaction rate and a six-fold increase in the effective diffusion kinetics in response to a catalytic model using glucose as the substrate, together with the advantage of shortened diffusion paths for reactants between multiple interparticle junctions and large active particle surface. The consequent benefits of this improved performance combined with the simple means of mass production are of major significance for the emerging printed electronics industry.

Polypyrrole-coated alginate/magnetite nanoparticles composite sorbent for the extraction of endocrine-disrupting compounds.

Magnetite nanoparticles incorporated into alginate beads and coated with a polypyrrole adsorbent were prepared (polypyrrole/Fe3 O4 /alginate bead) and used as an effective magnetic solid-phase extraction sorbent for the extraction and enrichment of endocrine-disrupting compounds (estriol, ß-estradiol and bisphenol A) in water samples. The determination of the extracted endocrine-disrupting compounds was performed using high-performance liquid chromatography with a fluorescence detector. The effect of various parameters on the extraction efficiency of endocrine disrupting compounds were investigated and optimized including the type and amount of sorbent, sample pH, extraction time, stirring speed, and desorption conditions. Under optimum conditions, the calibration curves were linear in the concentration range of 0.5-100.0 µg/L, and the limit of detection was 0.5 µg/L. The developed method showed a high extraction efficiency, the recoveries were in the range of 90.5 ± 4.1 to 98.2 ± 5.5%. The developed sorbent was easy to prepare, was cost-effective, robust, and provided a good reproducibility (RSDs < 5%), and could be reused 16 times. The developed method was successfully applied for the determination of endocrine-disrupting compounds in water samples.

Pure Nanoscale Morphology Effect Enhancing the Energy Storage Characteristics of Processable Hierarchical Polypyrrole.

We report a new synthesis approach for the precise control of wall morphologies of colloidal polypyrrole microparticles (PPyMPs) based on a time-dependent template-assisted polymerization technique. The resulting PPyMPs are water processable, allowing the simple and direct fabrication of multilevel hierarchical PPyMPs films for energy storage via a self-assembly process, whereas convention methods creating hierarchical conducting films based on electrochemical polymerization are complicated and tedious. This approach allows the rational design and fabrication of PPyMPs with well-defined size and tunable wall morphology, while the chemical composition, zeta potential, and microdiameter of the PPyMPs are well characterized. By precisely controlling the wall morphology of the PPyMPs, we observed a pure nanoscale morphological effect of the materials on the energy storage performance. We demonstrated by controlling purely the wall morphology of PPyMPs to around 100 nm (i.e., thin-walled PPyMPs) that the thin-walled PPyMPs exhibit typical supercapacitor characteristics with a significant enhancement of charge storage performance of up to 290% compared to that of thick-walled PPyMPs confirmed by cyclic voltametry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. We envision that the present design concept could be extended to different conducting polymers as well as other functional organic and inorganic dopants, which provides an innovative model for future study and understanding of the complex physicochemical phenomena of energy-related materials.

Polypyrrole/silica/magnetite nanoparticles as a sorbent for the extraction of sulfonamides from water samples.

A magnetic solid-phase extraction sorbent of polypyrrole/silica/magnetite nanoparticles was successfully synthesized and applied for the extraction and preconcentration of sulfonamides in water samples. The magnetite nanoparticles provided a simple and fast separation method for the analytes in water samples. The silica coating increased the surface area that helped to increase the polypyrrole layer. The polypyrrole-coated silica provided a high extraction efficiency due to the π-π and hydrophobic interactions between the polypyrrole and sulfonamides. Several parameters that affected the extraction efficiencies, i.e. the amount of sorbent, pH of the sample, extraction time, extraction temperature, ionic strength, and desorption conditions were investigated. Under the optimal conditions, the method was linear over the range of 0.30-200 µg/L for sulfadiazine and sulfamerazine, and 1.0-200 µg/L for sulfamethazine and sulfamonomethoxine. The limit of detection was 0.30 µg/L for sulfadiazine and sulfamerazine and 1.0 µg/L for sulfamethazine and sulfamonomethoxine. This simple and rapid method was successfully applied to efficiently extract sulfonamides from water samples. It showed a high extraction efficiency for all tested sulfonamides, and the recoveries were in the range of 86.7-99.7% with relative standard deviations of < 6%.

Affinity sensor using 3-aminophenylboronic acid for bacteria detection.

Boronic acid that can reversibly bind to diols was used to detect bacteria through its affinity binding reaction with diol-groups on bacterial cell walls. 3-aminophenylboronic acid (3-APBA) was immobilized on a gold electrode via a self-assembled monolayer. The change in capacitance of the sensing surface caused by the binding between 3-APBA and bacteria in a flow system was detected by a potentiostatic step method. Under optimal conditions the linear range of 1.5×10(2)-1.5×10(6) CFU ml(-1) and the detection limit of 1.0×10(2) CFU ml(-1) was obtained. The sensing surface can be regenerated and reused up to 58 times. The method was used for the analysis of bacteria in several types of water, i.e., bottled, well, tap, reservoir and wastewater. Compared with the standard plate count method, the results were within one standard deviation of each other. The proposed method can save both time and cost of analysis. The electrode modified with 3-APBA would also be applicable to the detection of other cis-diol-containing analytes. The concept could be extended to other chemoselective ligands, offering less expensive and more robust affinity sensors for a wide range of compounds.