The Effects of Seawater Treatment on Selected Coniferous Wood Types.

The mechanical strength of wood from Scots pine (Pinus sylvestris), European larch (Larix decidua), and Norway spruce (Picea abies) was studied using static compression tests. The material was exposed under constant soaking in water with salinity of 7‱. The liquid mix was prepared according to a value roughly equivalent to the average salinity along the entire length of the Baltic Sea. The mechanical strength and quality of the raw material were determined using a sea salt saturation test, which determined the adhesion of the raw material to the extrusion process (permissible stress). An investigation was conducted to determine the physicochemical parameters of the material that was tested. It was investigated how much mineral compounds were absorbed over four cycles lasting a total of six weeks during the test. According to the statistical analysis, the chemical composition of wood and the presence of salts and mineral compounds correlated with its mechanical strength. An important part of the study focused on examining the factors affecting the construction of coniferous wood structures. The preparation of the raw material correctly can provide information on how the material can be protected during exposure to specific environmental conditions for longer.

Emission of harmful gases from animal production in Poland.

The aim of the study was to present the scale of greenhouse gas emissions from animal production, and to provide test results from different housing systems. In three free stall buildings, two with slurry in deep channels and one with cattle in cubicles staying on shallow litter concentration of ammonia and carbon dioxide were measured in summer season by using dedicated equipment from Industrial Scientific Research. Air exchange was calculated on the base of balance carbon dioxide method. This method was used in order to estimate the air flow rate. Concentrations of ammonia and CO2 were measured as the base for air exchange and ammonia emission rates. Ammonia emissions were product of ammonia concentration and air exchange rate. Temperature and relative humidity were measured to establish microclimate conditions in buildings tested to show the overall microclimatic situation in buildings. Differences between ammonia emission rates were observed in both housing systems. The highest ammonia emission rate was equal to 2.75 g·h-1·LU-1 in well-ventilated cattle barn with the largest herd size.