Fluorescence of zirconium-naphthalene complexes: effect of ortho-naphthalene substitution.

The effect of the position of substituents on the formation of metal-naphthalene complexes has been investigated. Two positional isomers, 1-hydroxy-2-naphthoic acid (1H2NA) and 3-hydroxy-2-naphthoic acid (3H2NA), have been chosen. A comparative study of the luminescence behaviour of the two isomers in the presence of Zr(IV) has been performed. Interesting results were obtained. While 1-hydroxy-2-naphthoic acid is quenched in the presence of Zr(IV), 3-hydroxy-2-naphthoic acid produced high-fluorescence enhancement. Several pH studies were performed between pH 2.5 and 5.0 and the stoichiometries of the complexes were also established at the different pH values tested, by use of the Benesi-Hildebrand method. In addition, the formation constants have been calculated. Finally, quenching and lifetime studies were performed in an attempt to establish the type of quenching (static or dynamic) that is produced when a complex is formed between 1-hydroxy-2-naphthoic acid and zirconium metal ion.

Fluorescence of metal-ligand complexes of mono- and di-substituted naphthalene derivatives.

In this work, metal ion complexes for several naphthalene derivatives have been investigated. Different working pH values were chosen: 2.5 for complexes with Zr(IV), 4.0 for complexes with Fe(III), 5.0 for complexes with Al(III), and 7.5 for complexes with Cu(II). A stoichiometry of 1:1 for all complexes except two has been established by use of the Benesi-Hildebrand method and the stability constants have been calculated. All complexes between naphthalene derivatives and Cu(II) and Fe(III) show fluorescence quenching. In the case of Al(III), all complexes provided enhanced fluorescence. For Zr(IV), only the complex with 3-hydroxy-2-naphthoic acid provided enhanced fluorescence. The value of the stability constants as a function of the substituents of naphthalene derivatives has been analyzed. One can conclude that Cu(II) showed the largest binding affinity for the mono-substituted derivatives. However, Al(III) and Zr(IV) produced greater selectivity for the di-substituted derivatives. Iron(III) showed no specific binding with any of the naphthalene derivatives.

Elemental analysis of soft plaque and calcified plaque deposits from human coronary arteries and aorta.

Twenty-five samples of soft plaque and calcified plaque deposits from human hearts or aorta were analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The determined elements were Ca, P, Na, K, Mg, Zn, Cu, Ba, Pb, Fe, Al, Si, and S. Results showed that the concentration of all elements in the soft plaque was at the micromolar level. In the calcified deposits, the concentrations of Ca and P were at least an order of magnitude higher than the soft plaque, but the other elements were at the same order of magnitude. In the calcified plaque the molar ratios of Ca/P suggested that a significant portion existed as hydroxyapatite Ca10(PO4)6(OH)3. However, their absolute concentrations indicated that this compound was not a major component of the plaque although it may play a major role in determining the crystal structure of the deposit. In some samples the Ca/P ratio was too high to conform to hydroxyapatite. In others it was too low. This indicated that both the calcium and phosphorus existed in other chemical forms which varied from sample to sample. In the soft tissue the P level was high indicating it existed primarily in chemical forms other than hydroxyapatite. The presence of homocysteine is often associated with heart disease. However, the low levels of sulfur indicate that although it may be present, it is not a major component of the plaque, but may nevertheless play an important role in its formation.

Elution behavior of unsaponifiable lipids with various capillary electrochromatographic stationary phases.

Capillary electrochromatographic (CEC) separations of unsaponifiable lipids, tocopherols (T), tocotrienols (T3), and plant sterols were studied under various conditions. Investigated stationary phases include pentafluorophenylsilica (PFPS), triacontylsilica (TCS), and octadecylsilica (ODS) phases. A baseline separation of four sterols (ergosterol, lanosterol, sitosterol and stigmasterol) on ODS was achieved and their elution order was found to be dictated by side-chain structures. CEC of the tocol-derived compounds on PFPS in aqueous methanol yielded the most satisfactory results with complete resolution of all components eluting in the order deltaT3>beta3>gammaT3>epsilonP>alphaT3>deltaT>zeta2T>betaT>gammaT>alphaT, while a reversal in elution of the epsilonT-alphaT3 pair was observed in aqueous acetonitrile. CEC with a TCS phase in non-aqueous methanol led to a different elution pattern deltaT3>gammaT3>betaT3>alphaT3epsilonT>deltaT>(zeta2+gamma)T>betaT>alphaT, despite favorable resolution of the (gamma-zeta2)T pair along with the observation of inseparable(beta-gamma)T and (beta-gamma)T3 pairs in non-aqueous dimethylformamide. Non-aqueous acetonitrile mobile phases provided unique selectivity for the (gamma-zeta2)T pair and isomer separations on TCS. Variations in separation and retention factors of relevant antioxidant species with CEC variables were evaluated. Examples of CEC quantification of unsaponifiable fractions of rice bran oils and soybean oils are presented.

Comparison of monomeric and polymeric amino acid based surfactants for chiral separations.

To better understand chiral recognition with polymeric amino acid based surfactants, the chromatographic performance of 18 monomeric and polymeric surfactants were compared for chiral analytes with various charge states and hydrophobicities. In this study, four amino acids (glycine, L-alanine, L-valine, and L-leucine) were chosen, and all possible combinations of the chiral single amino acid and dipeptide surfactants were synthesized. The results indicate that polymeric surfactants usually provide better chiral resolution for enantiomers of lorazepam, temazepam, 1,1'-bi-2-naphthol, and propranolol as compared to monomeric surfactants. In contrast, monomers perform better for chiral recognition of the 1,1'-bi-2-naphthyl-2,2'-diyl hydrogenphosphate enantiomers.

Separation of monomethyl-benz[a]anthracene isomers using cyclodextrin-modified electrokinetic chromatography.

Cyclodextrin-modified electrokinetic chromatography (CD-EKC) was investigated for the separation of 12 monomethylbenz[a]anthracene (MBA) isomers. Combined use of a polymeric surfactant, poly(sodium 10-undecenyl sulfate) (poly-SUS), with various types of neutral cyclodextrins (CDs) [beta-CD, gamma-CD, dimethyl-beta-CD (DM-beta-CD), trimethyl-beta-CD (TM-beta-CD) and hydroxypropyl-beta-CD (HP-beta-CD)] were successful in CD-EKC separation of the MBA isomers. Baseline resolution of 10 of the 12 isomers, except for 9-MBA and 2-MBA, was achieved with gamma-CD at pH 9.75. The beta-CD, gamma-CD, and beta-CD derivatives (DM-beta-CD, TM-beta-CD, HP-beta-CD) were found to have different resolution and selectivity. Additionally, the tR/t0 values of isomers were found to be dependent on the type and concentration of the CD additives. In general, tR/t0 values of MBA isomers decrease with an increase in the concentration of beta-CD derivatives, whereas the reversed was true when the concentrations of native beta-CD and gamma-CD were varied. The combination of 5 mM gamma-CD, 0.5% (w/v) poly-SUS, 35% (v/v) acetonitrile at a pH of 9.75 provided the best selectivity and resolution of the MBA isomers with a separation time of 110 min. However, the use of 30 mM DM-beta-CD under similar EKC conditions resulted in much faster separation (ca. 16 min) of 10 MBA isomers.

Separation of the insecticidal pyrethrin esters by capillary electrochromatography.

A simple, rapid technique for the direct separation and quantification of the six insecticidally active pyrethrin esters in typical extracts and commercial formulations by capillary electrochromatography (CEC) has been described. The separation of the pyrethrin esters was achieved by optimizing several parameters including the length of stationary phase, the mobile phase composition and column temperature. The mobile phase composition had the most pronounced effect toward resolving these structurally similar compounds. A ternary mobile phase composed of acetonitrile-aqueous buffer-tetrahydrofuran (55:35:10) provided the elutropic solvent strength needed to resolve the six esters from an extract mixture in under 16 min. A 25 cm packed bed of Hypersil 3 microm C18 stationary phase was used with the ternary mobile phase at 25 degrees C and 30 kV voltage. These conditions also yielded excellent separation of the pyrethrin esters in two different commercially available insecticidal formulations. In addition, the developed CEC method was shown to be a fast and easy way of quantifying the amount of these esters in typical pyrethrin formulations.

Separation of tocopherol isomers using capillary electrochromatography: comparison of monomeric and polymeric C30 stationary phases.

The comparison of tocopherol isomer separation achieved using different stationary-phase alkyl chain lengths (i.e., C18 vs C30) and modes of alkyl phase attachment to the silica-based supports (i.e., polymeric vs monomeric synthesis) using capillary electrochromatography (CEC) has been demonstrated. The smaller alkyl chain does not exhibit the shape selectivity needed to resolve all of the tocopherol isomers. Conversely, both polymeric and monomeric C30 phases show increased tocopherol isomer selectivity. Changing the elutropic strength of the mobile phase had dramatic effects on the selectivity, with small additions of water to a methanol mobile phase yielding the best selectivity. The complete baseline separation of the tocopherol isomers was achieved using the monomerically bound C30 stationary phase and a methanol/ water mobile phase. The differences in stationary-phase selectivity were examined using a NIST standard reference material for determining column selectivity in LC. The results indicated that the monomeric C30 actually had "intermediate" phase characteristics (i.e., high phase loading, end capping, etc). This new CEC-based separation was also used to separate the tocopherols in a vitamin E supplement sample.

GR 24 enantiomers: synthesis, NMR spectroscopy, X-ray crystallography, and separation by chiral electrokinetic capillary chromatography.

Chiral discrimination of enantiomers of 2-methyl-4-(2-oxo-2,3,3a,8b-tetrahydro-4H-indeno[1,2b]furan-3-yl-iden emethoxy)but-2-en-4-olide (commonly referred to as GR 24) by three polymeric chiral surfactants (PCS) is studied by use of chiral polymeric surfactant capillary electrophoresis (CPSCE). The CPSCE results indicate that the optical configurations of valine residues on the PCS backbone affect chiral resolution and elution order of GR24 stereoisomers. The L- and D-forms of poly(sodium N-undecanoyl valinate) provide baseline separation of all four enantiomers while the DL-form separates diastereomers of GR 24 (1). A model is presented rationalizing the migration behavior and chiral resolution of 1 in CPSCE. The actual configuration of the stereogenic centers of GR 24 and 3-[(2,5-dihydro-3-methyl-2-oxo-5-furanyl)oxo]-methylene-3,3a,6,6a-tetrah ydro-2H-cyclopenta[b]furan-2-one (GR 7) is established by a concerted application of high-resolution nuclear magnetic resonance spectroscopy and X-ray crystallography.

Capillary electrophoretic separation of binaphthyl enantiomers with two polymeric chiral surfactants: 1H-nuclear magnetic resonance and fluorescence spectroscopy study.

The use of the water-soluble polymeric chiral surfactants (PCS), sodium N-undecanoyl-L-valinate (poly-L-SUV) and sodium undecanoyl-L-isoleucinate (poly-L-SUI) as buffer additives in electrokinetic chromatography (EKC) afforded the separation of racemic mixtures of 2,2'-dihydroxy-1,1'-binaphthyl (BOH) and 1,1'-binaphthyl-2,2'-diyl hydrogen phosphate (BNP). The apparent binding constants of the PCS to the enantiomers of BNP and BOH were obtained through 1H-nuclear magnetic resonance (1H-NMR) titrations and fluorescence spectroscopy, respectively. The 1H-NMR titration studies show that the BNP enantiomers are localized in the hydrophobic micellar pockets of PCS and form complexes of a 1:1 stoichiometry. The binding constants of PCS of BOH were determined from a Benesi-Hildebrand treatment of the fluorescence data. The EKC data corroborate those of the binding constants, supporting the formation of inclusion complexes. A model rationalizing the chiral discrimination of the enantiomers of BNP is proposed based on the intermolecular interactions observed in 1H-NMR data.

Chiral separation with dipeptide-terminated polymeric surfactants: the effect of an extra heteroatom on the polar head group.

Chiral recognition of two binaphthyl derivatives and three benzodiazepines were studied by use of polymeric surfactants in electrokinetic chromatography. Four specific dipeptide terminated (multichiral) micelle polymers were synthesized for this study. These include poly (sodium-N-undecanoyl-L-alanyl-leucinate)-(poly L-SUAL), poly (sodium-N-undecanoyl-L-valyl-leucinate) (poly L-SUVL), poly (sodium-N-undecanoyl-Lseryl-leucinate) (poly L-SUSL), and poly(sodium-N-undecanoyl-L-threonyl-leucinate) (poly L-SUTL). In addition to the chiral separation study, the physicochemical properties (critical micelle concentration and specific rotation) of each polymer were investigated. The molecular weights of the various dipeptide-terminated micelle polymers were determined using analytical ultracentrifugation. These dipeptide-terminated micelle polymers were designed to study the effect of the extra heteroatom at the polar head group of the micelle polymer (i.e., poly L-SUSL compared to poly L-SUAL and poly L-SUTL compared to poly L-SUVL) on the enantiomeric separation of the binaphthyl derivatives and benzodiazepines. The synergistic effect of three chiral centers (poly L-SUTL) provided improved resolution over that of two chiral centered dipeptide-terminated micelle polymer in the case of (+/-)-temazepam, (+/-)-oxazepam, (+/-)-binaphthol, and (+/-)-binaphthol phosphate. The chiral recognition mechanisms in these cases were additionally controlled by the presence of the extra heteroatom located on the polar head group of the micelle polymers.

Capillary electrochromatography of cholesterol and its ester derivatives.

Separation of cholesterol and its ester derivatives using micellar electrokinetic chromatography is a challenge due to the extreme hydrophobicity of these compounds. In this work, an isocratic capillary electrochromatography (CEC) method has been developed to separate a complex mixture of cholesterol and its 12-ester derivatives. The proportions of mobile phase (tetrahydrofuran, acetonitrile, water), as well as the effects of acid modifiers, buffer concentrations, voltage, and temperature on the separation of cholesterol derivatives were investigated. Addition of a polymeric surfactant, poly(sodium N-undecanoyl-L-glycinate), to the mobile phase reduced migration time and improved resolution of the analytes. The CEC method developed allows baseline separation of a complex mixture of cholesterol and 12 ester derivatives in less than 40 min. Finally, the method is applied to the characterization of cholesterol, cholesterol linoleate, and cholesterol oleate extracted from atherosclerotic plaque deposits in the arterial walls of a human aorta.

Enantiomeric separations by use of polymeric surfactant electrokinetic chromatography.

This review surveys the enantiomeric separation of drugs by electrokinetic chromatography using polymeric chiral surfactant pseudostationary phases. These phases have recently been shown to provide better mass transfer and increased rigidity and stability than regular micelles in micellar capillary electrophoresis. Characterization of the polymeric chiral surfactants is presented. Solution interactions of the pseudostationary phases via thermodynamics and fluorescence probe studies are evaluated. Also, case studies of enantiomeric separation of drugs using a single amino acid surfactant and the synergistic effect of the addition of gamma-cyclodextrin to the buffer is discussed. The use of dipeptide surfactants for chiral drug separations is described as well.

Examination of structural changes of polymeric amino acid-based surfactants on enantioselectivity: effect of amino acid order, steric factors, and number and position of chiral centers.

In this study, a large number of polymeric chiral surfactants were examined and their performances in terms of enantiomeric resolution compared for a variety of chiral analytes. The surfactants investigated in this study include all possible dipeptide combinations of the L-form of alanine, valine, leucine, and the achiral amino acid glycine (except glycine-glycine). Also included in this study were the single amino acid surfactants of alanine, valine, and leucine as well as the single chiral center dipeptide surfactant poly(sodium undecyl-L-leucine-beta-alanine) (poly L-SULbetaA). Several different aspects of polymeric dipeptide surfactants, as they pertain to chiral separations, are examined. Some of the factors investigated in this report include the effect of position and number of chiral centers, amino acid order, and steric effects.

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography.

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Haën, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.

NMR and molecular mechanics study of pyrethrins I and II.

Bioassay-directed fractionation of the organic extract of the Kenyan pyrethrum flowers (Chrysanthemum cinerariaefolium Vissiani) resulted in the isolation of two natural pyrethrin esters, pyrethrin I (PI) and pyrethrin II (PII) as the major constituents. These esters elicited inhibition of the multiple drug resistant (MDR) Mycobacterium tuberculosis. The high-field (1)H and (13)C nuclear magnetic resonance (NMR) chemical shifts of PI and PII were unequivocally assigned using modern two-dimensional (2D) proton-detected heteronuclear multiple-quantum coherence (HMQC) and heteronuclear multiple-bond correlation (HMBC) experiments. The conformations of both esters were deduced from (1)H-(1)H vicinal coupling constants and confirmed by 2D nuclear Overhauser effect spectroscopy (NOESY). Computer molecular modeling (MM) studies revealed that PI and PII molecules adopt a "love-seat" conformation in chloroform (CDCl(3)) solution.