Kinetics of dehydrogenation of n-heptane over GaPt supported catalytically active liquid metal solutions (SCALMS).

The concept of Supported Catalytically Active Liquid Metal Solutions (SCALMS) was explored for the catalytic dehydrogenation of n-heptane. For this purpose, a GaPt on alumina (Ga84Pt/Al2O3) was compared with a Pt on alumina catalyst at different reaction temperatures and feed compositions. While the observed activation energies with both catalysts for the overall n-heptane depletion rate were similar with both catalysts, the SCALMS systems provides a lower activation energy for the desired dehydrogenation path and significantly higher activation energies for the undesired aromatization and cracking reaction. Thus, the SCALMS catalyst under investigation shows technically interesting features, in particular at high temperature operation. The partial pressure variation revealed an effective reaction order of around 0.7 for n-heptane for both catalysts, while the effective order for hydrogen was 0.35 for Pt/Al2O3 and almost zero for SCALMS.

Toward High-Energy-Density Fuels for Direct Liquid Organic Hydrogen Carrier Fuel Cells: Electrooxidation of 1-Cyclohexylethanol.

Electrochemically active liquid organic hydrogen carriers (EC-LOHCs) can be used directly in fuel cells; so far, however, they have rather low hydrogen storage capacities. In this work, we study the electrooxidation of a potential EC-LOHC with increased energy density, 1-cyclohexylethanol, which consists of two storage functionalities (a secondary alcohol and a cyclohexyl group). We investigated the product spectrum on low-index Pt single-crystal surfaces in an acidic environment by combining cyclic voltammetry, chronoamperometry, and in situ infrared spectroscopy, supported by density functional theory. We show that the electrooxidation of 1-cyclohexylethanol is a highly structure-sensitive reaction with activities Pt(111) ≫ Pt(100) > Pt(110). Most importantly, we demonstrate that 1-cyclohexylethanol can be directly converted to acetophenone, which desorbs from the electrode surface. However, decomposition products are formed, which lead to poisoning. If the latter side reactions could be suppressed, the electrooxidation of 1-cyclohexylethanol would enable the development of EC-LOHCs with greatly increased hydrogen storage capacities.

Ga-Pt supported catalytically active liquid metal solutions (SCALMS) prepared by ultrasonication - influence of synthesis conditions on n-heptane dehydrogenation performance.

Supported catalytically active liquid metal solution (SCALMS) materials represent a recently developed class of heterogeneous catalysts, where the catalytic reaction takes place at the highly dynamic interface of supported liquid alloys. Ga nuggets were dispersed into nano-droplets in propan-2-ol using ultrasonication followed by the addition of Pt in a galvanic displacement reaction - either directly into the Ga/propan-2-ol dispersion (in situ) or consecutively onto the supported Ga droplets (ex situ). The in situ galvanic displacement reaction between Ga and Pt was studied in three different reaction media, namely propan-2-ol, water, and 20 vol% water containing propan-2-ol. TEM investigations reveal that the Ga-Pt reaction in propan-2-ol resulted in the formation of Pt aggregates on top of Ga nano-droplets. In the water/propan-2-ol mixture, the desired incorporation of Pt into the Ga matrix was achieved. The ex situ prepared Ga-Pt SCALMS were tested in n-heptane dehydrogenation. Ga-Pt SCALMS synthesized in pure alcoholic solution showed equal dehydrogenation and cracking activity. Ga-Pt SCALMS prepared in pure water, in contrast, showed mainly cracking activity due to oxidation of Ga droplets. The Ga-Pt SCALMS material prepared in water/propan-2-ol resulted in high activity, n-heptene selectivity of 63%, and only low cracking tendency. This can be attributed to the supported liquid Ga-Pt alloy where Pt atoms are present in the liquid Ga matrix at the highly dynamic catalytic interface.

Dry reforming of methane over gallium-based supported catalytically active liquid metal solutions.

Gallium-rich supported catalytically active liquid metal solutions (SCALMS) were recently introduced as a new way towards heterogeneous single atom catalysis. SCALMS were demonstrated to exhibit a certain resistance against coking during the dehydrogenation of alkanes using Ga-rich alloys of noble metals. Here, the conceptual catalytic application of SCALMS in dry reforming of methane (DRM) is tested with non-noble metal (Co, Cu, Fe, Ni) atoms in the gallium-rich liquid alloy. This study introduces SCALMS to high-temperature applications and an oxidative reaction environment. Most catalysts were shown to undergo severe oxidation during DRM, while Ga-Ni SCALMS retained a certain level of activity. This observation is explained by a kinetically controlled redox process, namely oxidation to gallium oxide species and re-reduction via H2 activation over Ni. Consequentially, this redox process can be shifted to the metallic side when using increasing concentrations of Ni in Ga, which strongly suppresses coke formation. Density-functional theory (DFT) based ab initio molecular dynamics (AIMD) simulations were performed to confirm the increased availability of Ni at the liquid alloy-gas interface. However, leaching of gallium via the formation of volatile oxidic species during the hypothesised redox cycles was identified indicating a critical instability of Ga-Ni SCALMS for prolonged test durations.

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study.

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C4 C1 Im][PF6 ] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %mol down to 1 %mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %mol . It also displays a strong temperature dependence, which was not observed for 5 %mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.

Supraparticles on beads for supported catalytically active liquid metal solutions - the SCALMS suprabead concept.

A novel GaPt-based supported catalytically active liquid metal solution (SCALMS) material is developed by exploiting the suprabead concept: Supraparticles, i.e. micrometer-sized particles composed of nanoparticles assembled by spray-drying, are bonded to millimeter-sized beads. The suprabeads combine macroscale size with catalytic properties of nanoscale GaPt particles entrapped in their silica framework.

Structure Formation in an Ionic Liquid Wetting Layer: A Combined STM, IRAS, DFT and MD Study of [C2 C1 Im][OTf] on Au(111).

In a solid catalyst with ionic liquid layer (SCILL), ionic liquid (IL) coatings are used to improve the selectivity of noble metal catalysts. To understand the origins of this selectivity control, we performed model studies by surface science methods in ultrahigh vacuum (UHV). We investigated the growth and thermal stability of ultrathin IL films by infrared reflection absorption spectroscopy (IRAS). We combined these experiments with scanning tunneling microscopy (STM) to obtain information on the orientation of the ions, the interactions with the surface, the intermolecular interactions, and the structure formation. Additionally, we performed DFT calculations and molecular dynamics (MD) simulations to interpret the experimental data. We studied the IL 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2 C1 Im][OTf] on Au(111) surfaces. We observe a weakly bound multilayer of [C2 C1 Im][OTf], which is stable up to 390 K, while the monolayer desorbs at ∼450 K. [C2 C1 Im][OTf] preferentially adsorbs at the step edges and elbows of the herringbone reconstruction of Au(111). The anion adsorbs via the SO3 group with the molecular axis perpendicular to the surface. At low coverage, the [C2 C1 Im][OTf] crystallizes in a glass-like 2D phase with short-range order. At higher coverage, we observe a phase transition to a 6-membered ring structure with long-range order.

Thermodynamic Analysis of Chemical Hydrogen Storage: Energetics of Liquid Organic Hydrogen Carrier Systems Based on Methyl-Substituted Indoles.

Liquid organic hydrogen carriers can store hydrogen in a safe and dense form through covalent bonds. Hydrogen uptake and release are realized by catalytic hydrogenation and dehydrogenation, respectively. Indoles have been demonstrated to be interesting candidates for this task. The enthalpy of reaction is a crucial parameter in this regard as it determines not only the heat demand for hydrogen release, but also the reaction equilibrium at given conditions. In this work, a combination of experimental measurements, quantum chemical methods and a group-additivity approach has been applied to obtain a consistent dataset on the enthalpies of formation of different methylated indole derivatives and their hydrogenated counterparts. The results show a namable influence of the number and position of methyl groups on the enthalpy of reaction. The enthalpy of reaction of the overall hydrogenation reaction varies in the range of up to 18.2 kJ·mol-1 (corresponding to 4.6 kJ·mol(H2)-1). The widest range of enthalpy of reaction data for different methyl indoles has been observed for the last step (hydrogenation for the last double bond in the five-membered ring). Here a difference of up to 7.3 kJ·mol(H2)-1 between the highest and the lowest value was found.

Isolated Rh atoms in dehydrogenation catalysis.

Isolated active sites have great potential to be highly efficient and stable in heterogeneous catalysis, while enabling low costs due to the low transition metal content. Herein, we present results on the synthesis, first catalytic trials, and characterization of the Ga9Rh2 phase and the hitherto not-studied Ga3Rh phase. We used XRD and TEM for structural characterization, and with XPS, EDX we accessed the chemical composition and electronic structure of the intermetallic compounds. In combination with catalytic tests of these phases in the challenging propane dehydrogenation and by DFT calculations, we obtain a comprehensive picture of these novel catalyst materials. Their specific crystallographic structure leads to isolated Rhodium sites, which is proposed to be the decisive factor for the catalytic properties of the systems.

Preparation of geometrically highly controlled Ga particle arrays on quasi-planar nanostructured surfaces as a SCALMS model system.

This study establishes a preparative route towards a model system for supported catalytically active liquid metal solutions (SCALMS) on nanostructured substrates. This model is characterized by a uniquely precise geometrical control of the gallium particle size distribution. In a SCALMS system, the Ga serves as a matrix material which can be decorated with a catalytically active material subsequently. The corresponding Ga containing precursor is spin-coated on aluminum based substrates, previously nanostructured by electrochemical anodization. The highly ordered substrates are functionalized with distinct oxide coatings by atomic layer deposition (ALD) independently from the morphology. After preparation of the metal particles on the oxide interface, the characterization of our model system in terms of its geometry parameters (droplet diameter, size distribution and population density) points to SiO2 as the best suited surface for a highly controlled geometry. This flexible model system can be functionalized with a dissolved noble metal catalyst for the application chosen.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

The front cover artwork is provided by the groups of Prof. Hans-Peter Steinrück and Prof. Peter Wasserscheid at the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg. The image shows substitution of volatile acetonitrile ligands by a nitrile-functionalized imidazolium cation. The formed cationic complex and the counter ions exhibit a specific preferential orientation at the ionic liquid/gas interface, which can be studied by angle-resolved XPS. Read the full text of the Research Article at 10.1002/cphc.202200391.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design.

Invited for the cover of this issue are the groups of Hans-Peter Steinrück and Peter Wasserscheid at the Friedrich-Alexander-Universität Erlangen-Nürnberg. The image depicts two Pt catalysts dissolved in an ionic liquid. For one of them, fluorinated side chains in the ligand system act as buoys leading to pronounced enrichment of the complex at the gas/IL interface, as is evidenced by strongly enhanced Pt signals in angle-resolved photoelectron spectroscopy. For the complex without fluorinated side chains, no such effect is observed. Read the full text of the article at 10.1002/chem.202203325.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design.

The targeted enrichment of a Pt complex with an ionic liquid (IL)-derived ligand system in IL solution is demonstrated by using angle-resolved X-ray photoelectron spectroscopy. When the ligand system is complemented with fluorinated side chains, the complex accumulates strongly at the IL/gas interface, while in an equivalent solution of a complex without these substituents no such effect could be observed. This buoy-like behavior induces strong population of the complex at the outermost molecular layer close to surface saturation, which was studied over a range from 5 to 30 %mol . The surface enrichment was found to be most efficient at the lowest concentration, which is particularly favorable for catalytic applications such as supported ionic-liquid-phase (SILP) catalysis.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C3 CNC1 Im][Tf2 N] and [C1 CNC1 Pip][Tf2 N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

Nucleation as a rate-determining step in catalytic gas generation reactions from liquid phase systems.

The observable reaction rate of heterogeneously catalyzed reactions is known to be limited either by the intrinsic kinetics of the catalytic transformation or by the rate of pore and/or film diffusion. Here, we show that in gas generation reactions from liquid reactants, the nucleation of gas bubbles in the catalyst pore structure represents an additional important rate-limiting step. This is highlighted for the example of catalytic hydrogen release from the liquid organic hydrogen carrier compound perhydro-dibenzyltoluene. A nucleation-inhibited catalytic system produces only dissolved hydrogen with fast saturation of the fluid phase around the active site, while bubble formation enhances mass transfer by more than a factor of 50 in an oscillating reaction regime. Nucleation can be efficiently triggered not only by temperature changes and catalyst surface modification but also by a mechanical stimulus. Our work sheds new light on performance-limiting factors in reactions that are of highest relevance for the future green hydrogen economy.

Electrochemically Triggered Energy Release from an Azothiophene-Based Molecular Solar Thermal System.

Molecular solar thermal (MOST) systems combine solar energy conversion, storage, and release in simple one-photon one-molecule processes. Here, we address the electrochemically triggered energy release from an azothiophene-based MOST system by photoelectrochemical infrared reflection absorption spectroscopy (PEC-IRRAS) and density functional theory (DFT). Specifically, the electrochemically triggered back-reaction from the energy rich (Z)-3-cyanophenylazothiophene to its energy lean (E)-isomer using highly oriented pyrolytic graphite (HOPG) as the working electrode was studied. Theory predicts that two reaction channels are accessible, an oxidative one (hole-catalyzed) and a reductive one (electron-catalyzed). Experimentally it was found that the photo-isomer decomposes during hole-catalyzed energy release. Electrochemically triggered back-conversion was possible, however, through the electron-catalyzed reaction channel. The reaction rate could be tuned by the electrode potential within two orders of magnitude. It was shown that the MOST system withstands 100 conversion cycles without detectable decomposition of the photoswitch. After 100 cycles, the photochemical conversion was still quantitative and the electrochemically triggered back-reaction reached 94 % of the original conversion level.

Modifying the Electrocatalytic Selectivity of Oxidation Reactions with Ionic Liquids.

The "solid catalyst with ionic liquid layer" (SCILL) is an extremely successful new concept in heterogeneous catalysis. The idea is to boost the selectivity of a catalyst by its modification with an ionic liquid (IL). Here, we show that it is possible to use the same concept in electrocatalysis for the selective transformation of organic compounds. We scrutinize the electrooxidation of 2,3-butanediol, a reaction which yields two products, singly oxidized acetoin and doubly oxidized diacetyl. When adding the IL (1-ethyl-3-methyl-imidazolium trifluormethanesulfonate, [C2 C1 Im][OTf]), the selectivity for acetoin increases drastically. By in situ spectroscopy, we analyze the underlying mechanism: Specific adsorption of the IL anions suppresses the activation of water for the second oxidation step and, thus, enhances the selectivity for acetoin. Our study demonstrates the great potential of this approach for selective transformation of organic compounds.

A New Class of Task-Specific Imidazolium Salts and Ionic Liquids and Their Corresponding Transition-Metal Complexes for Immobilization on Electrochemically Active Surfaces.

Adding to the versatile class of ionic liquids, we report the detailed structure and property analysis of a new class of asymmetrically substituted imidazolium salts, offering interesting thermal characteristics, such as liquid crystalline behavior, polymorphism or glass transitions. A scalable general synthetic procedure for N-polyaryl-N'-alkyl-functionalized imidazolium salts with para-substituted linker (L) moieties at the aryl chain, namely [LPhm ImH R]+ (L=Br, CN, SMe, CO2 Et, OH; m=2, 3; R=C12 , PEGn ; n=2, 3, 4), was developed. These imidazolium salts were studied by single-crystal X-ray diffraction (SC-XRD), NMR spectroscopy and thermochemical methods (DSC, TGA). Furthermore, these imidazolium salts were used as N-heterocyclic carbene (NHC) ligand precursors for mononuclear, first-row transition metal complexes (MnII , FeII , CoII , NiII , ZnII , CuI , AgI , AuI ) and for the dinuclear Ti-supported Fe-NHC complex [(OPy)2 Ti(OPh2 ImC12 )2 (FeI2 )] (OPy=pyridin-2-ylmethanolate). The complexes were studied concerning their structural and magnetic behavior via multi-nuclear NMR spectroscopy, SC-XRD analyses, variable temperature and field-dependent (VT-VF) SQUID magnetization methods, X-band EPR spectroscopy and, where appropriate, zero-field 57 Fe Mössbauer spectroscopy.

Ga-Ni supported catalytically active liquid metal solutions (SCALMS) for selective ethylene oligomerization.

Non-precious metal supported catalytically active liquid metal solutions exhibit attractive performance in ethylene oligomerization. It is found for the Ga-Ni system on silica that the performance depends strongly on the applied Ga/Ni ratio. Ga-rich systems forming liquid alloys exhibit a far higher Ni-based catalytic activity than solid intermetallic compounds or Ni nanoparticles.