Developing an outcome-based assessment for family therapy training: the Rochester Objective Structured Clinical Evaluation (ROSCE).

This paper addresses a growing need for cost-effective, outcome-based assessment in family therapy training. We describe the ROSCE, a structured, evidence-informed, learner-centered approach to the assessment of clinical skills developed at the University of Rochester Medical Center. The ROSCE emphasizes direct observation of trainees demonstrating clinical competencies. The format integrates both formative and summative assessment methods. It can readily be adapted to a wide variety of educational and training settings.

Ligand substitution behavior of Ru(6)(mu(6)-C)(CO)(17) with unsaturated diphosphines: facile capping of a polyhedral face and photochemically promoted P-C bond cleavage in the cluster Ru(6)(mu(6)-C)(CO)(14)(mu(3)-bpcd).

The ligand substitution chemistry of the hexaruthenium cluster Ru(6)(mu(6)-C)(CO)(17) () with several unsaturated diphosphine ligands has been investigated. Thermolysis of with (Z)-Ph(2)PCH[double bond, length as m-dash]CHPPh(2) (dppen) furnishes the new cluster compounds Ru(5)(mu(5)-C)(CO)(12)(mu(3)-dppen) (), Ru(6)(mu(6)-C)(CO)(14)(mu(3)-dppen) (), and Ru(6)(mu(6)-C)(CO)(12)(mu(3)-dppen)(mu-dppen) (). Clusters and are also obtained when a mixture of and dppen is treated with the oxidative-decarbonylation reagent Me(3)NO. Thermolysis or Me(3)NO activation of in the presence of 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) yields Ru(6)(mu(6)-C)(CO)(14)(mu(3)-bpcd) () as the sole observable product. Near-UV irradiation of leads to P-C bond cleavage and the formation of phosphido-bridged cluster Ru(6)(mu(6)-C)(CO)(13)[mu(3)-C[double bond, length as m-dash]C(PPh(2))C(O)CH(2)C(O)](mu-PPh(2)) () in essentially quantitative yield. The reaction between and the ligand 3,4-bis(diphenylphosphino)-5-methoxy-2(5H)-furanone (bmf) leads to the formation of Ru(6)(mu(6)-C)(CO)(14)(mu(3)-bmf) (), which exists as a single diastereomer in solution as shown by (1)H and (31)P NMR spectroscopy. The molecular structures and the binding mode of the ancillary diphosphine ligand(s) in have all been established by X-ray diffraction analyses. The solid-state structure of reveals that the chiral bmf ligand caps one of the metallic faces stereospecifically with the 5-methoxy moiety oriented distal or trans relative to the Ru(6) polyhedral core. The new substitution products are discussed relative to the products obtained from and the related diphosphine ligands dppm, dppe, dppf, and dppbz.

Bismuth aryloxides.

The synthesis and full characterization (mp, NMR, UV/vis, FTIR, and elemental analysis) of 13 bismuth aryloxides are reported. We have prepared bismuth aryloxides with alkyl, aryl, and allylic substituents on the aryl rings. Eleven of these bismuth aryloxides have been characterized with single crystal X-ray diffraction methods. Bismuth-donor interactions (donor = aryl, methoxy) are observed in several cases. Three unexpected bismuth oxo aryloxides (6c, 9c, 11c) were also isolated. Complex C(77)H(102)Bi(4)Br(6)O(8) (6c) results from apparent C-H activation and Bi-C bond formation as a sideproduct in the synthesis of Bi(O-2,6-(i)Pr(2)-4-BrC(6)H(2))(3) (6). Cluster 9c has a Bi(32)O(56) core, and cluster C(90)H(90)Bi(4)Li(2)O(12) (11c) is the second lithium bismuth oxo cluster reported to date.

Unusual manganese(III)-mediated oxidative free radical additions of 1,3-dicarbonyl compounds to benzonorbornadiene and 7-heterobenzonorbornadienes: mechanistic studies.

Benzonorbornadiene and heterobenzonorbornadiene were reacted with dimedone/acetylacetone and Mn(OAc)3 in the presence and absence of Cu(OAc)2. The reaction of benzonorbornadiene with dimedone gave mainly the dihydrofuran addition product, whereas the reaction with acetylacetone produced a rearranged product in addition to the dihydrofuran derivative. On the other hand, oxanorbornadiene gave unusual products such as the cycloproponated compound and a product arising from the incorporation of 2 mol of dimedone. The reaction of azanorbornadiene with 1,3-dicarbonyl compounds and Mn(OAc)3 always produced rearranged products. The mechanism of formation of the products is discussed. We generally observe that the cyclization reaction takes place after the oxidation of the initially formed radical.

Structure elucidation of an unexpected product from dehydration of a beta-hydroxyketone.

The structure of an unexpected compound from the dehydration of an aldol addition product has been determined using 1-D and 2-D NMR techniques. This reaction is the last step in a new synthetic approach to the galanthan ring system. Complete 1H and 13C NMR assignments for two synthetic precursors are also reported.

Molybdocalixarene structure control via rim deprotonation. synthesis, characterization, and crystal structures of calix[4]arene Mo(VI) monooxo complexes and calix[4]arene alkali metal/Mo(VI) dioxo complexes.

We report a series of calix[4]arene Mo(VI) dioxo complexes M2RC4MoO2 (M = alkali metal, R = H or Bu(t)) that were fully characterized by NMR, X-ray, IR, UV/vis, and elemental analysis. Molybdocalix[4]arene structures can be controlled via lower rim deprotonation, groups at para positions of calix[4]arene, and alkali metal counterions. Mono deprotonation at the lower rim leads to calix[4]arene Mo(VI) monooxo complexes RC4MoO (R = H, Bu(t), or allyl), and full deprotonation gives rise to calix[4]arene Mo(VI) dioxo complexes. Structural studies indicate that HC4 Mo(VI) dioxo complexes easily form polymeric structures via cation-pi interaction and coordination between different calixarene units. However, Bu(t)C4 Mo(VI) dioxo complexes tend to form dimers or tetramers due to steric hindrance of the tert-butyl groups at para positions in calixarene. The structures of the reduced side products A and C were determined by X-ray diffraction studies. The mechanism of RC4MoO formation from the reaction of calixarene monoanions with MoO2Cl2 appears to include the addition of a calixarene -OH group across a Mo=O bond.

Synthesis and structure of cyclopropano-annelated homosesquinorbornene derivatives containing pyramidalized double bonds: evidence for the sterical effect of a cyclopropyl group on the degree of C=C double-bond pyramidalization.

[reaction: see text] endo- and exo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl esters have been synthesized, and their Diels-Alder cycloaddition reactions with maleic anhydride, dimethyl acetylenedicarboxylate and singlet oxygen have been investigated. The X-ray analysis of four adducts indicated the pyramidalization of the central double bond. Density functional theory calculations on the isolated products and model compounds showed excellent agreement between the experimental and theoretical determined butterfly angles. Furthermore, it has been shown that a cyclopropyl group fused to [2.2.2] system decreases significantly the degree of the pyramidalization which is attributed to the steric interactions between the cyclopropyl group and ethano bridge of the norbornene systems. Due to the instability of the bicyclic endoperoxides, their X-ray analysis could not be carried out. DFT calculations on model compounds showed increased bending in the case of the product obtained by the addition of singlet oxygen to endo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl ester.

Facile formation of molybdenum(VI) monooxo aryloxides MoO(OAr)4-nCln from molybdenum dioxo dichloride.

Molybdenum monooxo compoundsMoO(OAr)4-nCln (n=0-2, Ar=2,6-Me2C6H3 or 2,6-i-Pr2C6H3) have been synthesized starting from the dioxo precursor MoO2Cl2. The complexes are characterized spectroscopically and by X-ray diffraction. The formation mechanism likely involves phenol precoordination followed by addition across the Mo=O bond.

Steric control of coordination number: A series of Mo(VI) dioxo diaryloxide complexes bearing 4-, 5-, and 6-coordinate environments.

The design, synthesis, and structure determination of a series of Mo(VI) dioxo diaryloxide complexes have been reported. By varying the steric bulk of the aryloxide ligand, control of the coordination number around the Mo(VI) center was achieved. All the complexes are characterized by analytical and spectroscopic techniques. Preliminary reactivity tests indicate that the 4-coordinate compound is the most stable and the 6-coordinate compound is the least stable.

Synthesis, structures, and conformational characteristics of calixarene monoanions and dianions.

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.

Chuvash-type congenital polycythemia in 4 families of Asian and Western European ancestry.

The Chuvash form of polycythemia is an autosomal recessive disorder common to a large number of families in central Russia. Affected individuals have been reported to be homozygous for an Arg200Trp mutation in the von Hippel-Lindau (VHL) gene. We have screened 78 patients with erythrocytosis and found 8 of Bangladeshi and Pakistani origin to be homozygous for the Arg200Trp mutation and another of English descent to be heterozygous. Of these patients, 5 have elevated serum erythropoietin (Epo) levels, while the other 4 have Epo values in the normal range. The heterozygous patient does not fulfill the Chuvash criterion for homozygosity of the Arg200Trp mutation and consequently may harbor a further, as yet uncharacterized, mutation. This mutation has a wider geographic distribution than originally presumed and haplotype analysis suggests a common origin of the Arg200Trp mutation in the 4 families, but it still remains to be established if it has arisen independently of the Chuvash population.

Synthesis, structure, and reactivity of some sterically hindered (Silylamino)phosphines.

A series of new (silylamino)phosphines that contain sterically bulky silyl groups on nitrogen were prepared by deprotonation/substitution reactions of the hindered disilylamines t-BuR(2)Si(Me(3)Si)NH (1, R = Me; 2, R = Ph) and (Et(3)Si)(2)NH (3). Sequential treatment of the N-lithio derivatives of 1-3 with PCl(3) or PhPCl(2) and MeLi gave the corresponding (silylamino)phosphines t-BuR(2)Si(Me(3)Si)NP(R')Me (5, R = Me, R' = Ph; 6, R = Ph, R' = Me) and (Et(3)Si)(2)NP(R)Me (11, R = Me; 12, R = Ph) in high yields. Two of the P-chloro intermediates t-BuR(2)Si(Me(3)Si)NP(Ph)Cl (7, R = Ph; 9, R = Me) were also isolated and fully characterized. Hydrolysis of 7 afforded the crystalline PH-substituted aminophosphine oxide t-BuPh(2)SiN(H)P(Ph)(=O)H (10). Thermal decomposition of 7 occurred with elimination of Me(3)SiCl and formation of a novel P(2)N(2) four-membered ring system (36) that contains both P(III) and P(V) centers. Reactions of the N-lithio derivatives of amines 1 and 2 with phosphorus trihalides afforded the thermally stable -PF(2) derivatives t-BuR(2)Si(Me(3)Si)NPF(2) (13, R = Me; 14, R = Ph) and the unstable -PCl(2) analogue 17 (R = Ph). Reduction (using LiAlH(4)) of the SiPh-substituted dihalophosphines 14 and 17 gave the unstable parent phosphine t-BuPh(2)Si(Me(3)Si)NPH(2) (15). The P-organo-substituted (silylamino)phosphines underwent oxidative bromination to afford high yields of the corresponding N-silyl-P-bromophosphoranimines t-BuR(2)SiN=P(R')(Me)Br (18, R = R' = Me; 19, R = Me, R' = Ph; 20, R = Ph, R' = Me) and Et(3)SiN=P(R)(Me)Br (23, R = Me; 24, R = Ph). Subsequent treatment of these reactive PBr compounds with lithium trifluoroethoxide or phenoxide produced the corresponding PO derivatives t-BuR(2)SiN=P(R')(Me)OR' ' (25 and 26, R' ' = CH(2)CF(3); 28-30, R' ' = Ph) and Et(3)SiN=P(R)(Me)OR' (31 and 33, R' = CH(2)CF(3); 32 and 34, R = Ph), respectively. Many of the new compounds containing the bulky tert-butyldiphenylsilyl group, t-BuPh(2)Si, were solids that gave crystals suitable for X-ray diffraction studies. Consequently, the crystal structures of three (silylamino)phosphines (6, 7, and 14), one (silylamino)phosphine oxide (10), one N-silylphosphoranimine (30), and the cyclic compound 36 were determined. Among the (silylamino)phosphines, the P-N bond distances [6, N-PMe(2), 1.725(3) A; 7, N-P(Ph)Cl, 1.68(1) A, 14, N-PF(2), 1.652(4) A] decreased significantly as the electron-withdrawing nature of the phosphorus substituents increased. The N-silylphosphoranimine t-BuPh(2)SiN=PMe(2)OPh (30), which is a model system for poly(phosphazene) precursors, had a much shorter P=N distance of 1.512(6) A and a wide Si-N-P bond angle of 166.4(3) degrees. A similar P=N bond distance [1.514(7) A] and Si-N-P angle [169.9(6) degrees ] were observed for the exocyclic P=N-Si linkage in the ring compound 36, while the phosphine oxide 10 had P-N and P=O distances of 1.637(4) and 1.496(3) A, respectively, and a Si-N-P angle of 134.3(2) degrees.

Synthesis, structure, and reactivity of some N-phosphorylphosphoranimines.

A large series of new N-phosphorylphosphoranimines that bear potentially reactive functional groups on both phosphorus centers were prepared by silicon-nitrogen bond cleavage reactions of N-silylphosphoranimines. Thus, treatment of the N-silylphosphoranimines, Me(3)SiN=P(Me)(R)X (R = Me, Ph; X = OCH(2)CF(3) and R = Me, X = OPh), with phosphoryl chlorides, RP(=O)Cl(2) (R' = Cl, Me, Ph), readily afforded the corresponding N-phosphoryl derivatives, R'P(=O)(Cl)-N=P(Me)(R)X, in high yields. Subsequent reaction with 1 or 2 equiv of the silylamine, Me(3)SiNMe(2), resulted in ligand exchange at the phosphoryl (P=O) group to give the P-dimethylamino analogues, R'P(=O)(NMe(2))N=P(Me)(R)X (R' = Cl, NMe(2), Me, Ph; R = Me, Ph; X = OCH(2)CF(3), OPh). These new N-phosphorylphosphoranimines (and one thiophosphoryl analogue) were obtained as thermally stable, distillable liquids and were characterized by NMR ((1)H, (13)C, and (31)P) spectroscopy and elemental analysis. One member of the series, Cl(2)P(=O)N=P(Me)(Ph)OCH(2)CF(3) (4), was also studied by single-crystal X-ray diffraction which revealed that the formal P(O)-N single bond [1.55(1) A] is shorter than the formal N=PR(2)X double bond [1.60(1) A]. Such structural features are compared to those of similar compounds and discussed in relationship to the unexpected thermolysis pathways observed for these N-phosphorylphosphoranimines, none of which produced poly(phosphazenes).

Reactions of N-silylphosphoranimines with alcohols: synthesis and structure of cyclotriphosphazenes with nongeminal methyl and phenyl substituents.

The reactions of Me(3)SiN=P(OR")RR'(R" = Ph, CH(2)CF(3); R, R' = Me, Ph) with alcohols were investigated. With nonequivalent amounts of CF(3)CH(2)OH, the reactions produced high yields of the cyclic phosphazene (Me(2)PN)(3) and both the cis and trans isomers of nongeminally substituted [(Ph)(Me)PN](3). The isomers of this new cyclic phosphazene were separated by column chromatography and characterized by NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Crystals of the cis isomer 6a have a monoclinic crystal system, while the trans isomer 6b has a triclinic crystal system with two different molecules in an asymmetric unit. The bond lengths and bond angles are very similar to those of the simpler cyclic trimers (Me(2)PN)(3) and (Ph(2)PN)(3.) A likely pathway for the formation of these compounds is discussed.

Enantiospecific Formation of Trans 1,3-Disubstituted Tetrahydro-beta-carbolines by the Pictet-Spengler Reaction and Conversion of Cis Diastereomers into Their Trans Counterparts by Scission of the C-1/N-2 Bond.

The factors which effect the stereoselective formation of trans-1-alkyl-2-benzyl-3-(alkoxycarbonyl)-1,2,3,4-tetrahydro-beta-carbolines and trans-3-(alkoxycarbonyl)-1-alkyl-2-(diphenylmethyl)-1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler cyclization were examined by heating tryptophan derivatives with aldehydes of varied steric bulk under aprotic and acidic conditions, followed by determination of the ratio of cis to trans diastereomers so formed. The presence of a benzyl group at the N(b)-nitrogen atom alters the diastereochemical outcome of this condensation to provide 100% trans stereoselectivity when the cyclization is carried out with cyclohexanecarboxaldehyde. Furthermore, when N(b)-(diphenylmethyl)tryptophan isopropyl ester was condensed with aldehydes of any size, trans diastereomers are formed with 100% stereoselectively. The trans N(b)-substituted diastereomers are thermodynamically more stable than their cis congeners as shown by equilibration experiments in TFA. Conversion of the cis diastereomers into the more stable trans diastereomers is believed to occur under acidic conditions by cleavage of the carbon (C-1)-nitrogen (N-2) bond with complete retention of configuration at the C-3 stereocenter. Evidence from deuterium exchange experiments as well as optical rotations support this model for epimerization. In addition, when cis diastereomer 66a was allowed to stir in CF(3)COOD, the trans isomer 66b was isolated in 90% yield, while treatment of cis 66a with CF(3)COOH/NaBH(4) provided a mixture of the ring cleaved [scission across C(1)-N(2) bond] product 67 and the trans isomer 66b. Treatment of 66b (control experiment) with NaBH(4)/CF(3)COOH under the same conditions returned only starting trans 66b in excellent yield. The Pictet-Spengler reaction of substrates with sufficiently large substituents, followed by treatment with acid, permits the 100% enantiospecific formation of trans-1,3-disubstituted-1,2,3,4-tetrahydro-beta-carbolines for alkaloid total synthesis.