RESUMO
Injection moulding (IM) tools with embedded sensors can significantly improve the process efficiency and quality of the fabricated parts through real-time monitoring and control of key process parameters such as temperature, pressure and injection speed. However, traditional mould tool fabrication technologies do not enable the fabrication of complex internal geometries. Complex internal geometries are necessary for technical applications such as sensor embedding and conformal cooling which yield benefits for process control and improved cycle times. With traditional fabrication techniques, only simple bore-based sensor embedding or external sensor attachment is possible. Externally attached sensors may compromise the functionality of the injection mould tool, with limitations such as the acquired data not reflecting the processes inside the part. The design freedom of additive manufacturing (AM) enables the fabrication of complex internal geometries, making it an excellent candidate for fabricating injection mould tools with such internal geometries. Therefore, embedding sensors in a desired location for targeted monitoring of critical mould tool regions is easier to achieve with AM. This research paper focuses on embedding a wireless surface acoustic wave (SAW) temperature sensor into an injection mould tool that was additively manufactured from stainless steel 316L. The laser powder bed fusion (L-PBF) "stop-and-go" approach was applied to embed the wireless SAW sensor. After embedding, the sensor demonstrated full functionality by recording real-time temperature data, which can further enhance process control. In addition, the concept of novel print-in-place venting design, applying the same L-PBF stop-and-go approach, for vent embedding was successfully implemented, enabling the IM of defectless parts at faster injection rates, whereas cavities designed and tested without venting resulted in parts with burn marks.
RESUMO
Injection moulding (IM) is an important industrial process, known to be the most used plastic formation technique. Demand for faster cycle times and higher product customisation is driving interest in additive manufacturing (AM) as a new method for mould tool manufacturing. The use of AM offers advantages such as greater design flexibility and conformal cooling of components to reduce cycle times and increase product precision. However, shortcomings of metal additive manufacturing, such as porosity and residual stresses, introduce uncertainties about the reliability and longevity of AM tooling. The injection moulding process relies on high volumes of produced parts and a minimal amount of tool failures. This paper reviews the demands for tool condition monitoring systems for AM-manufactured mould tools; although tool failures in conventionally manufactured tooling are rare, they do occur, usually due to cracking, deflection, and channel blockages. However, due to the limitations of the AM process, metal 3D-printed mould tools are susceptible to failures due to cracking, delamination and deformation. Due to their success in other fields, acoustic emission, accelerometers and ultrasound sensors offer the greatest potential in mould tool condition monitoring. Due to the noisy machine environment, sophisticated signal processing and decision-making algorithms are required to prevent false alarms or the missing of warning signals. This review outlines the state of the art in signal decomposition and both data- and model-based approaches to determination of the current state of the tool, and how these can be employed for IM tool condition monitoring. The development of such a system would help to ensure greater industrial uptake of additive manufacturing of injection mould tooling, by increasing confidence in the technology, further improving the efficiency and productivity of the sector.
