Interleukin-6 as a critical inflammatory marker for early diagnosis of surgical site infection after spine surgery.

PURPOSE: Early diagnosis of surgical site infections (SSIs) could prevent surgical revision. Inflammatory markers (IMs), such as procalcitonin (PCT), interleukin-6 (IL-6), and tumor necrosis factor α (TNF-α), seem more accurate in diagnosing SSI than C-reactive protein (CRP) and white blood cell (WBC) count. The aim was to compare the predictive values of CRP, WBC count, PCT, IL-6, and TNF-α in SSI detection. METHODS: A total of 130 patients undergoing dorsal spondylodesis from 2019 to 2024 were enrolled in a prospective diagnostic study at a maximum care spine center. IMs were measured preoperatively and on the postoperative days (PODs) 1, 2, 3, 5, and 7. Patients with high suspicion of SSI underwent revision surgery. SSI was diagnosed when the microbiological evidence was positive. Patients were divided a posteriori into the non-infection and infection groups. RESULTS: IMs of 118 patients (66.9 ± 13.0 years, 61.0% females) were measured. Fifteen of the 118 patients (12.7%) developed an SSI. The groups differed with respect to existing hypertension, number of instrumented segments, region of surgery, CRPPOD1,7, PCTPOD7, and IL-6POD3,5,7. Binary logistic regression for SSI detection including these parameters showed an area under the curve (AUC) of 0.88 (95% CI 0.79-0.98; P < 0.001). The main effect for SSI detection was maintained by IL-6POD7 (odds ratio = 1.13; 95% CI 1.05-1.23; P = 0.001), which itself showed an AUC of 0.86 (95% CI 0.75-0.97). CONCLUSION: Compared to CRP, WBC count, PCT, and TNF-α, IL-6 seems to be the critical IM for the early detection of an SSI. TRIAL REGISTRATION: drks.de: DRKS00033773, date of registration: 29.02.2024, retrospectively registered; Postoperative Markers of Inflammation in Spine Surgery (POMIS) Trial.

The influence of pelvic tilt on sacral insufficiency fracture occurrence: Insights into the prevalence of high pelvic tilt among patients affected.

INTRODUCTION: Fragility fractures without significant trauma of the pelvic ring in older patients have an increasing incidence due to demographic change. Influencing factors other than osteoporotic bone quality that lead to an insufficiency fracture are not yet known. However, it is suspected that the pelvic tilt (PT) has an effect on the development of such an insufficiency fracture. This study explores the influence of the PTs in patients with insufficiency fractures of the posterior pelvic ring. MATERIALS AND METHODS: A total of 49 geriatric patients with fragility fractures of the pelvic ring were treated at a university hospital level-1 trauma center during a period between February and December 2023, and their fractures were classified according to the FFP classification of Rommens and Hofmann. Complete sets of computer tomography (CT) and radiological images were available to determine the PT angle of the patients. RESULTS: 34 FFP type 2 and 15 FFP type 3 classified patients were included in the study. Significant difference was seen in the pelvic tilt (PT) angle between the patient group with insufficiency fractures (n= 49; mean age: 78.02 ± 11.80) and the control group with lumbago patients (n= 53; mean age: 69.23 ± 11.23). The PT was significantly higher in the patients with insufficiency fractures (25.74° ± 4.76; p⁎⁎⁎⁎ ≤ 0.0001). CONCLUSIONS: The study demonstrates a significant extension of the PT angle of individuals with insufficiency fractures when compared to those with lumbago. The result suggests a potential association between pelvic tilt and fracture susceptibility. TRIAL REGISTRATION: A retrospective study about the influence of sagittal balance of the spine on insufficiency fractures of the posterior pelvic ring measured by the "pelvic tilt angle", DRKS00032120. Registered 20th June 2023 - Prospectively registered. Trial registration number DRKS00032120.

Effects of Iliosacral Joint Immobilization on Walking after Iliosacral Screw Fixation in Humans.

BACKGROUND: Pelvis fractures are commonly stabilized by surgical implants to facilitate their healing. However, such implants immobilize the iliosacral joint for up to a year until removal. We report how iliosacral joint immobilization affects the walking of patients. METHODS: The gaits of patients with immobilized sacroiliac joints after unstable pelvic fracture (n = 8; mean age: 45.63 ± 23.19; five females and three males) and sex- and age-matched healthy control individuals (n = 8; mean age: 46.50 ± 22.91; five females and three males) were recorded and analyzed using a motion capture system. The forces between the tread and feet were also recorded. Standard gait parameters as well as dynamic patterns of joint angles and moments of the lower extremities were analyzed using the simulation software OpenSim. RESULTS: With the exception of hip extensor strength, the monitored joint parameters of the patients showed task-dependent deviations during walking, i.e., plantarflexor force was increased when stepping on an elevated surface, as were hip flexion and extensor moments, knee flexion and extensor moments, as well as ankle dorsiflexion and the associated negative plantarflexor force during stance on the elevated surface. CONCLUSIONS: Iliosacral joint fixation causes reduced forward and upward propulsion and requires an extended range of hip motion in the sagittal plane. Patients show significant mobility limitation after iliosacral screw fixation.

Cervical Disc Arthroplasties Fail to Maintain Physiological Kinematics Under Lateral Eccentric Loads.

STUDY DESIGN: In vitro human cadaveric biomechanical analysis. OBJECTIVES: Optimization of prostheses for cervical disc arthroplasties (CDA) reduces the risk of complications. The instantaneous helical axis (IHA) is a superior parameter for examining the kinematics of functional spinal units. There is no comprehensive study about the IHA after CDA considering all 3 motion dimensions. METHODS: Ten human functional spinal units C4-5 (83.2 ± 7.9 yrs.) were examined with an established measuring apparatus in intact conditions (IC), and after CDA, with 2 different types of prostheses during axial rotation, lateral bending, and flexion/extension. Eccentric preloads simulated strains. The IHA orientation and its position at the point of rest (IHA0-position) were analyzed. RESULTS: The results confirmed the existing data for IHA in IC. Lateral preloads showed structural alterations of kinematics after CDA: During axial rotation and lateral bending, the shift of the IHA0-position was corresponding with the lateral preloads' applied site in IC, while after CDAs, it was vice versa. During lateral bending, the lateral IHA orientation was inclined, corresponding with the lateral preloads' applied site in the IC and oppositely after the CDAs. During flexion/extension, the lateral IHA orientation was nearly vertical in the IC, while after CDA, it inclined, corresponding with the lateral preloads' applied site. The axial IHA orientation rotated to the lateral preloads' corresponding site in the IC; after CDA, it was vice versa. CONCLUSION: Both CDAs failed to maintain physiological IHA characteristics under lateral preloads, revealing a new aspect for improving prostheses' design and optimizing their kinematics.

[Surgical management of acute traumatic spinal cord injury : Stability vs. functionality]. / Chirurgische Therapie der akuten traumatischen Querschnittsverletzung : Stabilität vs. Funktionalität.

BACKGROUND: Traumatic spinal cord injuries represent a devastating condition in the lives of those affected, with physical, emotional, and economic burdens for the patients themselves, their social environment, and society as a whole. OBJECTIVE: Surgical approach and techniques in traumatic spinal cord injuries. RESULTS: Traumatic spinal cord injuries should be surgically treated as soon as possible, but at least within 24 h of injury. If accompanying dural injuries occur, suturing or applying a patch is the primary method of choice. Early surgical decompression is essential, particularly in cervical spinal cord injuries. Stabilization in terms of instrumentation or fusion is inevitable and should be carried out over short segments to maintain the functionality of the cervical spine. Long-distance dorsal instrumentation with prior reduction in thoracolumbar spinal cord injuries provides high stability and preserved functionality in patients. Injuries to the thoracolumbar junction often require a two-stage anterior treatment. CONCLUSION: Early surgical decompression, reduction, and stabilization of traumatic spinal cord injuries within 24 h are recommended. While short-segment stabilization is recommended in the cervical spine in addition to decompression, instrumentation should be over long segments in the thoracolumbar spine to provide the necessary stability while maintaining functionality.

Effect of a Contrast Agent on Bone Mineral Density Measurement in the Spine and Hip Using QCT-Conversion Factor Recommendation.

BACKGROUND: Osteoporosis causes an increased fracture risk. Clinically, osteoporosis is diagnosed late, usually after the first fracture occurs. This emphasizes the need for an early diagnosis of osteoporosis. However, computed tomography (CT) as routinely used for polytrauma scans cannot be used in the form of quantitative computed tomography (QCT) diagnosis because QCT can only be applied natively, i.e., without any contrast agent application. Here, we tested whether and how contrast agent application could be used for bone densitometry measurements. METHODS: Bone mineral density (BMD) was determined by QCT in the spine region of patients with and without the contrast agent Imeron 350. Corresponding scans were performed in the hip region to evaluate possible location-specific differences. RESULTS: Measurements with and without contrast agent administration between spine and hip bones indicate that the corresponding BMD values were reproducibly different between spine and hips, indicating that Imeron 350 application has a location-specific effect. We determined location-specific conversion factors that allow us then to determine the BMD values relevant for osteoporosis diagnosis. CONCLUSIONS: Results show that contrast administration cannot be used directly for CT diagnostics because the agent significantly alters BMD values. However, location-specific conversion factors can be established, which are likely to depend on additional parameters such as the weight and corresponding BMI of the patient.

Combination of vertebral bone quality scores from different magnetic resonance imaging sequences improves prognostic value for the estimation of osteoporosis.

BACKGROUND CONTEXT: Recent findings revealed a correlation between vertebral bone quality based on T1-weighted (VBQT1) magnetic resonance imaging (MRI) and volumetric bone mass density (vBMD) measured using quantitative computerized tomography. The coherence of VBQ for other MRI sequences, such as T2 or short tau inversion recovery (STIR), has not been examined. The combination of different VBQs has not been studied. PURPOSE: The aims of the study were to confirm the correlation between VBQT1 and vBMD and to examine VBQs from other MRI sequences and their combination with vBMD. STUDY DESIGN/SETTING: This was a retrospective cross-sectional study. PATIENT SAMPLE: The sample consisted of patients older than 18 years, who received treatment at a level-one university spine center of the German Spine Society for degenerative or traumatic reasons in 2017-2021. OUTCOME MEASURES: The outcome measures were the correlation of VBQs from different MRI sequences with vBMD and the association of VBQs with osteopenia/osteoporosis. METHODS: Patients' VBQ was calculated based on the signal intensities of the vertebral bodies L1-4 in T1-, T2-, and STIR-weighted MRI. The VBQ was standardized according to the signal intensity of the cerebrospinal fluid. The vBMD was determined using data from a calibrated scanner (SOMATOM Definition AS+) and processed with CliniQCT (Mindways Software, Inc., USA). Groups were divided according to vBMD into the following groups: (I) osteoporosis/osteopenia (< 120 mg/m3) and (II) healthy (≥120 mg/m3). An analysis of the correlation between various VBQs and vBMD as well as receiver operating characteristic (ROC) and binary regression analyses were performed for the prediction of osteoporosis/osteopenia. RESULTS: We included 136 patients (women: 56.6%) in the study (69.7 ± 15.0 years). According to vBMD, 108 patients (79.4%) had osteoporosis/osteopenia. Women were affected significantly more often than men (p = .045) and had significantly higher VBQT1 and VBQT2 values than men (VBQT1: p = .048; VBQT2: p = .013). VBQT1 and VBQT2 values were significantly higher in patients with osteoporosis/osteopenia than in healthy persons (VBQT1: p<.001; VBQT2: p = .025). VBQT1 and VBQT2 were significantly negatively correlated with vBMD with a moderate effect size (p<.001), while VBQSTIR was not significantly correlated with vBMD, although it showed a positive coherence. The combination of different VBQs in terms of VBQT1 × VBQT2 / VBQSTIR distinctly increased the effect size of the negative correlation with vBMD compared to VBQ alone. A cutoff value for VBQT1 × VBQT2 / VBQSTIR of 2.9179 achieved a sensitivity of 80.0%, a specificity of 75.0%, and an area under the curve (AUC) of 0.775 for the determination of osteoporosis. The mathematical model derived from the binary logistic regression showed an excellent AUC of 0.846. CONCLUSIONS: This study confirms a significant correlation between VBQT1 and vBMD. The combination of VBQs from different MRI sequences enhances the prognostic value of VBQ for the determination of osteoporosis. While safe clinical application of VBQ for the determination of osteoporosis requires further validation, VBQ might offer opportunistic estimation for further diagnostics.

Psychostimulants Modafinil, Atomoxetine and Guanfacine Impair Bone Cell Differentiation and MSC Migration.

Attention deficit hyperactivity disorder (ADHD) is one of the most common worldwide mental disorders in children, young and adults. If left untreated, the disorder can continue into adulthood. The abuse of ADHD-related drugs to improve mental performance for studying, working and everyday life is also rising. The potentially high number of subjects with controlled or uncontrolled use of such substances increases the impact of possible side effects. It has been shown before that the early ADHD drug methylphenidate influences bone metabolism negatively. This study focused on the influence of three more recent cognitive enhancers, modafinil, atomoxetine and guanfacine, on the differentiation of mesenchymal stem cells to osteoblasts and on their cell functions, including migration. Human mesenchymal stem cells (hMSCs) were incubated with a therapeutic plasma dosage of modafinil, atomoxetine and guanfacine. Gene expression analyses revealed a high beta-2 adrenoreceptor expression in hMSC, suggesting it as a possible pathway to stimulate action. In bone formation assays, all three cognitive enhancers caused a significant decrease in the mineralized matrix and an early slight reduction of cell viability without triggering apoptosis or necrosis. While there was no effect of the three substances on early differentiation, they showed differing effects on the expression of osterix (OSX), receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG) in the later stages of osteoblast development, suggesting alternative modes of action. All three substances significantly inhibited hMSC migration. This effect could be rescued by a selective beta-blocker (Imperial Chemical Industries ICI-118,551) in modafinil and atomoxetine, suggesting mediation via beta-2 receptor stimulation. In conclusion, modafinil, atomoxetine and guanfacine negatively influence hMSC differentiation to bone-forming osteoblasts and cell migration through different intracellular pathways.

Can You Feel it? - Correlation Between Intraoperatively Perceived Bone Quality and Objectively Measured Bone Mineral Density.

STUDY DESIGN: clinical study. OBJECTIVES: Loosening of pedicle screws is a frequent complication in patients with osteoporosis. The indication for additional stabilization, such as cement augmentation, is more often based on the subjective intraoperative feeling of the surgeon than on a preoperative bone mineral density (BMD) measurement. Aim was to evaluate the correlation of the intraoperative perceived bone quality in comparison to the objectively measured BMD. METHODS: A total of 62 patients undergoing dorsal stabilization using pedicle screws at a level-1 trauma center were analyzed. The preoperative CT scan measured each instrumented vertebra's pedicle size and BMD. During the surgery, the perceived screw stability was graded by the respective surgeon for each screw. RESULTS: 204 vertebral bodies were evaluated. Looking at all implanted screws a significant correlation between the measured BMD and the perceived screw stability was found (Resident r = .450; R2 = .202; P < .001/Attending r = .364; R2 = .133; P < .001), but there was no significant correlation in the osteoporotic patients (Resident P = .148 / Attending P = .907). The evaluation of the screws implanted in osteoporotic vertebrae showed that the surgeons considered a total of 31% of these screws to be sufficiently stable. CONCLUSIONS: There was no significant correlation between the measured BMD and the perceived pedicle screw stability in the group with osteopenic / osteoporotic bone (<100 mg/cm³). The results indicate that it is not possible to reliably determine the bone quality and the resulting screw stability in patients with reduced BMD. The preoperative measurement of the BMD should become a crucial part of preoperative planning.

[Does navigation still have a value in trauma surgery?] / Hat die Navigation in der Traumatologie noch einen Stellenwert?

BACKGROUND: Navigation systems are supposed to increase precision and support surgeons while they perform certain interventions. 2D, or nowadays 3D, systems are used in image-based approaches. Image-free navigation uses 3D printing. INDICATIONS: There are several studies on navigation procedures in trauma surgery. In contrast to limb surgery, the use of 3D navigation in pelvic and spine surgery is already well established. Navigation is especially regularly used to treat fractures of the posterior pelvic ring and for posterior stabilization of the cervical spine. REQUIREMENTS: To be able to utilize navigation systems optimally, the learning curve should be completed, and the technique should be used regularly. In addition, the surgeon should know the surgical technique without navigation in order to recognize potential errors of the navigation. ADVANTAGES AND DISADVANTAGES: Advantages include increased patient safety, reduction in radiation exposure and less invasive surgical procedures. However, among other disadvantages, initial costs are high.

Outcome after Posterior Vertebral Column Resection in Patients with Severe Osteoporotic Fractures-A Retrospective Analysis from Two Centers.

Background and Objectives: In osteoporotic fractures of the spine with resulting kyphosis and threatening compression of neural structures, therapeutic decisions are difficult. The posterior vertebral column resection (pVCR) has been described by different authors as a surgical treatment in a single-stage posterior procedure. The aim of this study is to evaluate midterm outcomes of patients treated by pVCR due to severe osteoporotic fractures. Materials and Methods: Retrospective data analysis of all the patients treated for osteoporotic fractures by pVCR from 2012-2020 at two centers was performed. Demographic data, visual analog scale (VAS), Frankel scale (FS), Karnofsky performance status (KPS), radiological result and spinal fusion rates were evaluated. Results: A total of 17 patients were included. The mean age was 70 ± 10.2 y. The mean VAS decreased significantly from 7.7 ± 2.8 preoperatively to 3.0 ± 1.6 at last follow-up (p < 0.001) and the segmental kyphosis decreased from 29.4 ± 14.1° to 7.9 ± 8.0° (p < 0.001). The neurologic function on the FS did not worsen in any and improved in four of the patients. The median KPS remained stable over the whole observation period (70% vs. 70%). Spinal fusion was observed in nine out of nine patients who received CT follow-up >120 days after index surgery. Conclusions: This study showed that pVCR is a safe surgical technique with few surgical complications and no neurological deterioration considering the cohort. The patients' segmental kyphosis and VAS improved significantly, while the KPS remained stable.

Long-term Quality of Life after Fusion of the Ventral Thoracic and Lumbar Spine.

BACKGROUND: Cage implantations and autologous pelvic bone grafts are common surgical procedures to fuse the spine in cases of spinal disorders such as traumatic fractures or degenerative diseases. These surgical methods are designed to stably readjust the spine and to prevent late detrimental effects such as pain or increasing kyphosis. Benefits of these surgical interventions have been evaluated, but the long-term well-being of patients after the respective treatments has not yet been examined. This study was designed to evaluate the clinical outcome for patients who received iliac crest or cage implantations. MATERIAL AND METHODS: Forty-six patients with traumatic fractures after they obtained an anterior fusion in the thoracic or lumbar spine (12 cages; mean age: 54.08 years; 34 pelvic bone grafts; mean age: 42.18 years) were asked to participate in the survey using a precast questionnaire according the Visual Analog Scale (VAS) Spine Score. Twenty-nine of them provided the data requested. RESULTS: Evaluation of the VAS scores of the patients, reporting at least 1 year after the surgery, revealed that cage implantations led to significantly better results with respect to all aspects of their daily life such as pain sensing, capability to undertake physical activities and exercise as compared with patients with autologous pelvic bone graft. Patients with autologous pelvic bone graft treatment reported a particularly poor overall satisfaction level concerning their long-term well-being. CONCLUSIONS: Patients with cage implantation reported a higher degree of long-term well-being. The data provide evidence for a positive impact on the postsurgery quality of life after cage implantation.

Influence of Hyponatremia on Spinal Bone Quality and Fractures Due to Low-Energy Trauma.

Background and Objectives: Hyponatremia is the most common electrolyte disorder in elderly and associated with increased risk of falls. Clinical studies as well as small animal experiments suggested an association between chronic hyponatremia and osteoporosis. Furthermore, it has been assumed that subtle hyponatremia may be an independent fracture risk in the elderly. Therefore, this study was designed to evaluate the possible influence of chronic hyponatremia on osteoporosis and low-energy fractures of the spine. Materials and Methods: 144 patients with a vertebral body fracture (mean age: 69.15 ± 16.08; 73 females and 71 males) due to low-energy trauma were treated in a level one trauma center within one year and were included in the study. Chronic hyponatremia was defined as serum sodium < 135 mmol/L at admission. Bone mineral density (BMD) of the spine was measured using quantitative computed tomography in each patient. Results: Overall, 19.44% (n = 28) of patients in the low-energy trauma group had hyponatremia. In the group with fractures caused by low-energy trauma, the proportion of hyponatremia of patients older than 65 years was significantly increased as compared to younger patients (p** = 0.0016). Furthermore, there was no significant gender difference in the hyponatremia group. Of 28 patients with chronic hyponatremia, all patients had decreased bone quality. Four patients showed osteopenia and the other 24 patients even showed osteoporosis. In the low-energy trauma group, the BMD correlated significantly with serum sodium (r = 0.396; p*** < 0.001). Conclusions: The results suggest that chronic hyponatremia affects bone quality. Patients with chronic hyponatremia have an increased prevalence of fractures after low-energy trauma due to a decreased bone quality. Therefore, physicians from different specialties should focus on the treatment of chronic hyponatremia to reduce the fracture rate after low-energy trauma, particularly with elderly patients.

The impact of bilateral facetectomy on the instantaneous helical axis of the functional thoracic spinal unit T4-5 during axial rotation.

The location of the instantaneous helical axis (IHA) and the impact of the facet joints (FJ) on the kinematics in the thoracic spine remain inconclusive. This study aimed to examine the IHA in the functional spinal unit (FSU) T4-5 during axial rotation in intact conditions and after bilateral facetectomy. Four human T4-5 FSUs were examined with an established 6D measuring apparatus in intact conditions and after bilateral facetectomy. The IHA's parameters migration, location, and direction in the horizontal plane were calculated. Defined preloads in different positions were applied. Under the intact conditions, the IHA migrated about 4 mm and from one to the contralateral side according to the applied preload. The location of the IHA was observed in the anterior part of the spinal canal. After bilateral facetectomy, the location of the IHA shifted ventrally about 10 mm compared to the intact conditions. Under intact conditions, the direction of the IHA was minimally dorsally reclined. After bilateral facetectomy, the IHA was significantly more ventrally inclined. The study determined the location of the IHA under intact conditions at the anterior part of the spinal canal. The IHA of the FSU T4-5 is substantially influenced by the guidance of the FJs.

Cage or Pelvic Graft-Study on Bony Fusion of the Ventral Thoracic and Lumbar Spine in Traumatic Vertebral Fractures.

Background and Objectives: Stabilization of the spine by cage implantation or autologous pelvic bone graft are surgical methods for the treatment of traumatic spine fractures. These methods serve to stably re-adjust the spine and to prevent late detrimental effects such as pain or increasing kyphosis. They both involve ventral interventions using interbody fusion to replace the intervertebral disc space between the vertebral bodies either by cages or autologous pelvic bone grafts. We examined which of these methods serves the patients better in terms of bone fusion and the long-term clinical outcome. Materials and Methods: Forty-six patients with traumatic fractures (12 cages; mean age: 54.08/34 pelvic bone grafts; mean age: 42.18) who received an anterior fusion in the thoracic or lumbar spine were included in the study. Postoperative X-ray images were evaluated, and fusion of the stabilized segment was inspected by two experienced spine surgeons. The time to discharge from hospital and gender differences were evaluated. Results: There was a significant difference of the bone fusion rate of patients with autologous pelvic bone grafts in favor of cage implantation (p = 0.0216). Also, the stationary phase of patients who received cage implantations was clearly shorter (17.50 days vs. 23.85 days; p = 0.0089). In addition, we observed a significant gender difference with respect to the bony fusion rate in favor of females treated with cage implantations (p < 0.0001). Conclusions: Cage implantations after spinal fractures result in better bony fusion rates as compared to autologous pelvic bone grafts and a shorter stay of the patients in the hospital. Thus, we conclude that cage implantations rather than autologous pelvic bone grafts should be the preferred surgical treatment for stabilizing the spine after fracture.

Impact of Screw Diameter on Pedicle Screw Fatigue Strength-A Biomechanical Evaluation.

OBJECTIVE: Loosening of pedicle screws is a frequently observed complication in spinal surgery. Because additional stabilization procedures such as cement augmentation or lengthening of the instrumentation involve relevant risks, optimal stability of the primarily implanted pedicle screw is of essential importance. The aim of the present study was to investigate the effect of increasing the screw diameter on pedicle screw stability. METHODS: A total of 10 human cadaveric vertebral bodies (L4) were included in the present study. The bone mineral density was evaluated using quantitative computed tomography and the pedicle diameter using computed tomography. The vertebrae underwent instrumentation using 6.0-mm × 45-mm pedicle screws on 1 side and screws with the largest possible diameter (8-10-mm × 45-mm) on the other side. Fatigue testing was performed by applying a cyclic loading (craniocaudal sinusoidal 0.5 Hz) with increasing peak force (100 N + 0.1 N/cycle) until screw head displacement of 5.4 mm was reached. RESULTS: The mean fatigue load was 334 N for the 6-mm diameter screws and was increased significantly to 454 N (+36%) for the largest possible diameter screws (P < 0.001). With an increase in the fatigue load by 52%, this effect was even more pronounced in vertebrae with reduced bone density (bone mineral density <120 mg/cm3; n = 7; P < 0.001). The stiffness of the construct was significantly greater in the largest diameter screw group compared with the standard screw group during the entire testing period (start, P < 0.001; middle, P < 0.001; end, P = 0.009). CONCLUSIONS: Increasing the pedicle screw diameter from a standard 6-mm screw to the largest possible diameter (8-10 mm) led to a significantly greater fatigue load.

Biomechanical Effects of a Cross Connector in Sacral Fractures - A Finite Element Analysis.

Background: Spinopelvic fractures and approaches of operative stabilization have been a source of controversial discussion. Biomechanical data support the benefit of a spinopelvic stabilization and minimally invasive procedures help to reduce the dissatisfying complication rate. The role of a cross connector within spinopelvic devices remains inconclusive. We aimed to analyze the effect of a cross connector in a finite element model (FE model). Study Design: A FE model of the L1-L5 spine segment with pelvis and a spinopelvic stabilization was reconstructed from patient-specific CT images. The biomechanical relevance of a cross connector in a Denis zone I (AO: 61-B2) sacrum fracture was assessed in the FE model by applying bending and twisting forces with and without a cross connector. Biomechanical outcomes from the numerical model were investigated also considering uncertainties in material properties and levels of osseointegration. Results: The designed FE model showed comparable values in range-of-motion (ROM) and stresses with reference to the literature. The superiority of the spinopelvic stabilization (L5/Os ilium) ± cross connector compared to a non-operative procedure was confirmed in all analyzed loading conditions by reduced ROM and principal stresses in the disk L5/S1, vertebral body L5 and the fracture area. By considering the combination of all loading cases, the presence of a cross connector reduced the maximum stresses in the fracture area of around 10%. This difference has been statistically validated (p < 0.0001). Conclusion: The implementation of a spinopelvic stabilization (L5/Os ilium) in sacrum fractures sustained the fracture and led to enhanced biomechanical properties compared to a non-reductive procedure. While the additional cross connector did not alter the resulting ROM in L4/L5 or L5/sacrum, the reduction of the maximum stresses in the fracture area was significant.

Biomechanical analysis of anterior pelvic ring fractures with intact peripelvic soft tissues: a cadaveric study.

PURPOSE: Biomechanical studies of the pelvis are usually performed using dissected pelvic specimens or synthetic bones. Thereby the stabilising effect of the surrounding soft tissues is analysed insufficiently. Biomechanical data for isolated anterior pelvic ring fractures are currently missing. Therefore, the purpose of this study was to develop a novel testing device for biomechanical analyses of the pelvis and to investigate two different anterior pelvic ring fractures in a cadaveric model with intact peripelvic soft tissues. METHODS: A new biomechanical table construction which enables the fixation and testing of complete cadaveric specimens was developed. It was used to investigate the relative motion and stiffness changes due to unilateral osteotomy of the superior and inferior pubic ramus. Five cadavers with a mean age of 55.6 years (± 15.53 years) were included and loaded with a sinusoidal, cyclic (1 Hz), compressive force of up to 365 N over ten cycles for each condition. RESULTS: Biomechanical testing of the pelvis with complete appended soft tissues was feasible. Native stiffness without a pelvic fracture was 64.31 N/mm (± 8.33 N/mm). A standardised unilateral osteotomy of the superior pubic ramus reduced the stiffness under isolated axial load by 2% (63.05 N/mm ± 7.45 N/mm, p = 0.690). Additional osteotomy of the inferior pubic ramus caused a further, statistically not significant, decrease by 5% (59.57 N/mm ± 6.84 N/mm, p = 0.310). CONCLUSIONS: The developed test device was successfully used for biomechanical analyses of the pelvis with intact peripelvic soft tissues. In a first study, isolated unilateral fractures of the anterior pelvic ring showed no relevant biomechanical variation compared to the intact situation under isolated axial load. Only 7% of the measured stiffness was created by both unilateral pubic rami. Therefore, the clinical practice to treat unilateral anterior pelvic ring fractures conservatively is supported by the results of this study.

Cortical threaded pedicle screw improves fatigue strength in decreased bone quality.

PURPOSE: Inadequate anchoring of pedicle screws in vertebrae with poor bone quality is a major problem in spine surgery. The aim was to evaluate whether a modified thread in the area of the pedicle could significantly improve the pedicle screw fatigue strength. METHODS: Fourteen human cadaveric vertebral bodies (L2 and L3) were used for in vitro testing. Bone density (BMD) was determined by quantitative computed tomography. Vertebral bodies were instrumented by standard pedicle screws with a constant double thread on the right pedicle and a partial doubling of the threads-quad thread-(cortical thread) in the area of the pedicle on the left pedicle. Pulsating sinusoidal, cyclic load (0.5 Hz) with increasing peak force (100 N + 0.1 N/cycles) was applied orthogonal to the screw axis. The baseline force remained constant (50 N). Fatigue test was terminated after exceeding 5.4-mm head displacement (~ 20° screw tilting). RESULTS: The mean fatigue load at failure was 264.9 N (1682 cycles) for the standard screws and was increased significantly to 324.7 N (2285 cycles) by the use of cortical threaded screws (p = 0.014). This effect is particularly evident in reduced BMD (standard thread 241.2 N vs. cortical thread 328.4 N; p = 0.016), whereas in the group of vertebrae with normal BMD no significant difference could be detected (standard thread 296.5 N vs. cortical thread 319.8 N; p = 0.463). CONCLUSIONS: Compared to a conventional pedicle screw, the use of a cortical threaded pedicle screw promises superior fatigue load in vertebrae with reduced bone quality.