The multidirectional roles of the anterior oblique ligament and dorsoradial ligament of the thumb carpometacarpal joint.

The multidirectional biomechanics of the thumb carpometacarpal (CMC) joint underlie the remarkable power and precision of the thumb. Because of the unconfined nature of thumb CMC articulation, these biomechanics are largely dictated by ligaments, notably the anterior oblique ligament (AOL) and the dorsoradial ligament (DRL). However, the rotational and translational stabilizing roles of these ligaments remain unclear, as evidenced by the variety of interventions employed to treat altered pathological CMC biomechanics. The purpose of this study was to determine the effects of sectioning the AOL (n = 8) or DRL (n = 8) on thumb CMC joint biomechanics (rotational range-of-motion [ROM] and stiffness, translational ROM) in 26 rotational directions, including internal and external rotation, and in eight translational directions. Using a robotic musculoskeletal simulation system, the first metacarpal of each specimen (n = 16) was rotated and translated with respect to the trapezium to determine biomechanics before and after ligament sectioning. We observed the greatest increase in rotational ROM and decrease in rotational stiffness in flexion directions and internal rotation following DRL transection and in extension directions following AOL transection. The greatest increase in translational ROM was in dorsal and radial directions following DRL transection and in volar directions following AOL transection. These data suggest the AOL and DRL play complementary stabilizing roles, primarily restraining translations in the direction of and rotations away from the ligament insertion sites. These findings may inform future interventions or implant designs for pathological CMC joints.

A review of wear debris in thumb base joint implants.

AIM: Polymers and metals, such as polyethylene (PE) and cobalt chrome (CoCr), are common materials used in thumb-based joint implants, also known as CMC (Carpometacarpal) arthroplasty. The purpose of this review was to investigate the reported failure modes related to wear debris from these type of materials in CMC implants. The impact of wear debris on clinical outcomes of CMC implants was also examined. Potential adverse wear conditions and inflammatory particle characteristics were also considered. METHOD: A literature search was performed using PRISMA guidelines and 55 studies were reviewed including 49 cohort studies and 6 case studies. Of the 55 studies, 38/55 (69%) focused on metal-on-polyethylene devices, followed by metal-on-metal (35%), and metal-on-bone (4%). RESULTS: The summarized data was used to determine the frequency of failure modes potentially related to wear debris from metals and/or polymers. The most commonly reported incidents potentially relating to debris were implant loosening (7.1%), osteolysis (1.2%) and metallosis (0.6%). Interestingly the reported mechanisms behind osteolysis and loosening greatly varied. Inflammatory reactions, while rare, were generally attributed to metallic debris from metal-on-metal devices. Mechanisms of adverse wear conditions included implant malpositioning, over-tensioning, high loading for active patients, third-body debris, and polyethylene wear-through. No specific examination of debris particle characterization was found, pointing to a gap in the literature. CONCLUSION: This review underscores the types of failure modes associated with wear debris in CMC implants. It was found that failure rates and adverse wear conditions of CMC implants of any design are low and the exact relationship between wear debris and implant incidences, such as osteolysis and loosening remains uncertain. The authors note that further research and specific characterization is required to understand the relationship between debris and implant failure.

Proximal Interphalangeal Joint Arthroplasty for Fracture.

Proximal interphalangeal joint arthroplasties can be performed in the setting of acute comminuted fracture, chronic fracture presentations, and posttraumatic arthritis. These surgeries provide excellent pain relief and patient satisfaction but patients should be cautioned not to expect an improvement in motion postoperatively. Despite high rates of minor complications and radiographic loosening, these implants have good rates of long-term survival with most revisions occurring in the early postoperative period. They provide viable alternatives to arthrodesis, osteotomy and amputation in the appropriate patient.

Dorsal Subluxation of the First Metacarpal During Thumb Flexion is an Indicator of Carpometacarpal Osteoarthritis Progression.

BACKGROUND: Measurable changes in patients with progression of thumb carpometacarpal (CMC) osteoarthritis (OA) include joint space narrowing, osteophyte formation, subluxation, and adjacent-tissue changes. Subluxation, an indication of mechanical instability, is postulated as an early biomechanical indicator of progressing CMC OA. Various radiographic views and hand postures have been proposed to best assess CMC subluxation, but 3D measurements derived from CT images serve as the optimal metric. However, we do not know which thumb pose yields subluxation that most indicates OA progression. QUESTIONS/PURPOSES: Using osteophyte volume as a quantitative measure of OA progression, we asked: (1) Does dorsal subluxation vary by thumb pose, time, and disease severity in patients with thumb CMC OA? (2) In which thumb pose(s) does dorsal subluxation most differentiate patients with stable CMC OA from those with progressing CMC OA? (3) In those poses, what values of dorsal subluxation indicate a high likelihood of CMC OA progression? METHODS: Between 2011 and 2014, 743 patients were seen at our institutions for trapeziometacarpal pain. We considered individuals who were between the ages of 45 and 75 years, had tenderness to palpation or a positive grind test result, and had modified Eaton Stage 0 or 1 radiographic thumb CMC OA as potentially eligible for enrollment. Based on these criteria, 109 patients were eligible. Of the eligible patients, 19 were excluded because of a lack of interest in study participation, and another four were lost before the minimum study follow-up or had incomplete datasets, leaving 86 (43 female patients with a mean age of 53 ± 6 years and 43 male patients with a mean age of 60 ± 7 years) patients for analysis. Twenty-five asymptomatic participants (controls) aged 45 to 75 years were also prospectively recruited to participate in this study. Inclusion criteria for controls included an absence of thumb pain and no evidence of CMC OA during clinical examination. Of the 25 recruited controls, three were lost to follow-up, leaving 22 for analysis (13 female patients with a mean age of 55 ± 7 years and nine male patients with a mean age of 58 ± 9 years). Over the 6-year study period, CT images were acquired of patients and controls in 11 thumb poses: neutral, adduction, abduction, flexion, extension, grasp, jar, pinch, grasp loaded, jar loaded, and pinch loaded. CT images were acquired at enrollment (Year 0) and Years 1.5, 3, 4.5, and 6 for patients and at Years 0 and 6 for controls. From the CT images, bone models of the first metacarpal (MC1) and trapezium were segmented, and coordinate systems were calculated from their CMC articular surfaces. The volar-dorsal location of the MC1 relative to the trapezium was computed and normalized for bone size. Patients were categorized into stable OA and progressing OA subgroups based on trapezial osteophyte volume. MC1 volar-dorsal location was analyzed by thumb pose, time, and disease severity using linear mixed-effects models. Data are reported as the mean and 95% confidence interval. Differences in volar-dorsal location at enrollment and rate of migration during the study were analyzed for each thumb pose by group (control, stable OA, and progressing OA). A receiver operating characteristic curve analysis of MC1 location was used to identify thumb poses that differentiated patients whose OA was stable from those whose OA was progressing. The Youden J statistic was used to determine optimized cutoff values of subluxation from those poses to be tested as indicators of OA progression. Sensitivity, specificity, negative predictive values, and positive predictive values were calculated to assess the performance of pose-specific cutoff values of MC1 locations as indicators of progressing OA. RESULTS: In flexion, the MC1 locations were volar to the joint center in patients with stable OA (mean -6.2% [95% CI -8.8% to -3.6%]) and controls (mean -6.1% [95% CI -8.9% to -3.2%]), while patients with progressing OA exhibited dorsal subluxation (mean 5.0% [95% CI 1.3% to 8.6%]; p < 0.001). The pose associated with the most rapid MC1 dorsal subluxation in the progressing OA group was thumb flexion (mean 3.2% [95% CI 2.5% to 3.9%] increase per year). In contrast, the MC1 migrated dorsally much slower in the stable OA group (p < 0.001), at only a mean of 0.1% (95% CI -0.4% to 0.6%) per year. A cutoff value of 1.5% for the volar MC1 position during flexion at enrollment (C-statistic: 0.70) was a moderate indicator of OA progression, with a high positive predictive value (0.80) but low negative predictive value (0.54). Positive and negative predictive values of subluxation rate in flexion (2.1% per year) were high (0.81 and 0.81, respectively). The metric that most indicated a high likelihood of OA progression (sensitivity 0.96, negative predictive value 0.89) was a dual cutoff that combined the subluxation rate in flexion (2.1% per year) with that of loaded pinch (1.2% per year). CONCLUSION: In the thumb flexion pose, only the progressing OA group exhibited MC1 dorsal subluxation. The MC1 location cutoff value for progression in flexion was 1.5% volar to the trapezium , which suggests that dorsal subluxation of any amount in this pose indicates a high likelihood of thumb CMC OA progression. However, volar MC1 location in flexion alone was not sufficient to rule out progression. The availability of longitudinal data improved our ability to identify patients whose disease will likely remain stable. In patients whose MC1 location during flexion changed < 2.1% per year and whose MC1 location during pinch loading changed < 1.2% per year, the confidence that their disease would remain stable throughout the 6-year study period was very high. These cutoff rates were a lower limit, and any patients whose dorsal subluxation advanced faster than 2% to 1% per year in their respective hand poses, were highly likely to experience progressive disease. CLINICAL RELEVANCE: Our findings suggest that in patients with early signs of CMC OA, nonoperative interventions aimed to reduce further dorsal subluxation or operative treatments that spare the trapezium and limit subluxation may be effective. It remains to be determined whether our subluxation metrics can be rigorously computed from more widely available technologies, such as plain radiography or ultrasound.

Bone morphological changes of the trapezium and first metacarpal with early thumb osteoarthritis progression.

BACKGROUND: Thumb carpometacarpal osteoarthritis is characterized by osteophyte growth and changes in the curvature of the articular surfaces of the trapezium and first metacarpal. The aim of this longitudinal study was to quantify in-vivo bone morphology changes with osteoarthritis progression. METHODS: The study analyzed an observational dataset of 86 subjects with early thumb osteoarthritis and 22 age-matched asymptomatic controls. CT scans of subjects' affected hands were acquired at enrollment (year 0), and at 1.5, 3, 4.5, and 6-year follow-up visits. Osteoarthritic subjects were classified into stable and progressive groups, as defined by osteophyte volume and the rate of osteophyte growth. Trapezium height, width, and volar facet recession, along with first metacarpal volar beak recession and recession angle, were quantified. FINDINGS: Mean trapezium width increased 12% over six years in the progressive osteoarthritis group. Trapezium volar recession of the progressive osteoarthritis group was significantly greater than stable at enrollment (P < 0.0001) and year 6 (P < 0.0001). The first metacarpal volar beak of the progressive osteoarthritis group recessed significantly faster than stable (P = 0.0004) and control (P = 0.0003). In year 6, volar beak surfaces in subjects with progressive osteoarthritis were flatter with reduced curvature, measuring -8.7 ± 4.0 degrees, compared to the stable osteoarthritis (P < 0.0001) and control groups (P = 0.0003), which maintained nominal curvatures, measuring 0.7 ± 2.5 and 0.2 ± 3.2 degrees, respectively. INTERPRETATION: Our results demonstrate significant recession and reduction in the angle of the first metacarpal volar beak in progressive osteoarthritis. Flattening of the first metacarpal volar beak may have important associations with carpometacarpal joint contact and loading migrations, further propagating osteophyte formation and bony remodeling. This work highlights the volar beak of the first metacarpal as a region of morphology change with disease.

Evaluation of the PROMIS Upper Extremity Against Validated Patient-Reported Outcomes in Patients With Early Carpometacarpal Osteoarthritis.

PURPOSE: Internal consistency, construct, and criterion validity of the Patient-Reported Outcomes Measurement Information System (PROMIS) upper extremity (UE) v1.2 were evaluated in patients with early-stage carpometacarpal (CMC) osteoarthritis (OA). We hypothesized that in patients with early CMC OA, PROMIS UE scores would: (1) be lower than those in asymptomatic controls; (2) correlate with established patient-reported outcomes; (3) correlate with pinch and grip strengths; and (4) not correlate with radiographic disease progression. METHODS: Patients with early CMC OA (modified Eaton stage 0 or 1) and matched asymptomatic control patients completed the PROMIS UE, Australian and Canadian Osteoarthritis Hand Index, and Patient-Rated Wrist-Hand Evaluation at 2 time points. The PROMIS UE's internal consistency was evaluated by Cronbach's alpha, construct validity by Spearman correlation coefficients among the patient-reported outcome measures, and criterion validity using measures of strength. A floor or ceiling effect was indicated if more than 15% of patients achieved the lowest or highest possible score. RESULTS: The PROMIS UE had high internal consistency. Patients with early CMC OA had a lower score than healthy controls (average, 42 vs 54, respectively). We observed moderate to high correlations between the PROMIS UEv1.2, Australian and Canadian Osteoarthritis Hand Index, and Patient-Rated Wrist-Hand Evaluation and good criterion validity when compared to key pinch and grip strengths. The PROMIS UE did not correlate to radiographic disease severity. CONCLUSIONS: The PROMIS UE had a high correlation with Australian and Canadian Osteoarthritis Hand Index and a moderate correlation with Patient-Rated Wrist-Hand Evaluation. The PROMIS UE had high internal consistency and good criterion validity. CLINICAL RELEVANCE: The PROMIS UE is a valid assessment for disability in patients with early CMC OA and can serve as a clinical adjunct to an outcome assessment.

Radiocarpal Fusion: Indications, Technique, and Modifications.

Degenerative disorders of the wrist may affect isolated joints and inhibit normal functions of the wrist secondary to pain and stiffness. These processes that affect only the radiocarpal joint may be secondary to posttraumatic osteoarthritis, primary osteoarthritis, or rheumatoid arthritis. Radiocarpal wrist arthrodesis may help preserve some of the native wrist kinematics while alleviating pain and improving the range of motion. However, the surgeon must ensure that the patient's pathologic process primarily affects the radiocarpal articulations while relatively sparing the midcarpal articulations. Depending on the location of the pathology, isolated radiolunate or radioscapholunate arthrodesis have been described to preserve some motion in the midcarpal joint. To maximize motion in the midcarpal joint after radiocarpal arthrodesis, techniques for distal scaphoid and triquetrum excision have been described. We report patient outcomes for various techniques and describe our preferred technique for radioscapholunate arthrodesis using distal scaphoid excision.

Implant Charge Differences Between Distal Radius Fixation Constructs (CPT 25607, 25608, and 25609).

BACKGROUND: Implants are a significant contributor to health care costs. We hypothesized that extra-articular fracture patterns would have a lower implant charge than intra-articular fractures and aimed to determine risk factors for increased cost. METHODS: In total, 163 patients undergoing outpatient distal radius fracture fixation at 2 hospitals were retrospectively reviewed stratified by Current Procedural Terminology codes. Implants and associated charges were noted, as were sex, age, insurance status, surgeon specialty, and location. Bivariate and multivariable regression were used to determine associations. RESULTS: Total implant charges were significantly lower for 25607 (extraarticular, $3,348) than 25608 (2-part intraarticular, $3,859) and 25609 (3+ part intraarticular, $3,991). In addition, intra-articular fractures had higher charges for distal screws/pegs and bone graft. Charge was lower when surgery was performed at a trauma center. There was no charge difference associated with insurance status, age, sex, hand surgery specialty, or fellow status. Substantial intersurgeon variation existed in all fracture types. CONCLUSION: Distal radius fractures may represent a good model for examining implant costs. Extra-articular fractures had lower implant charges than intra-articular fractures. These data may be used to help construct pricing for distal radius fracture bundles and potential cost savings.

The Association of AUSCAN and PRWHE Patient-reported Outcome Measures With Radiographic Progression of Early Thumb Carpometacarpal Arthritis at 36-Month Follow-up Is Limited to Subtle Changes in the Pain Subscale.

BACKGROUND: There is a paucity of literature that examines how patient-reported outcomes correspond to early radiographic progression of thumb carpometacarpal (CMC) osteoarthritis (OA). This study examines how Australian/Canadian Osteoarthritis Hand Index (AUSCAN) and Patient-Rated Hand and Wrist Evaluation (PRWHE) scores change over 36 months in subjects with early CMC OA. METHODS: Ninety-one subjects with symptomatic early thumb CMC OA were enrolled. Differences in AUSCAN and PRWHE scores were measured between subjects at baseline and at 18-month follow-up, and between the subjects at baseline and at 36-month follow-up. Radiographic progression was defined as an increase in modified Eaton Stage. Differences in AUSCAN and PRWHE scores were compared between these 2 groups in order to determine if radiographic progression was associated with a greater change in AUSCAN and PRWHE at 18- and 36-month follow-up. RESULTS: At 18- and 36-month follow-up visits, there were no significant differences in AUSCAN or PRWHE compared to baseline. Multivariable logistic regression analysis did not reveal any significant differences between subjects with radiographic progression to subjects without radiographic progression at 18-month follow-up. At 36-month follow-up, this analysis did demonstrate that subjects with evidence of radiographic progression had a significant increase in the PRWHE pain subscale. CONCLUSION: AUSCAN and PRWHE scores were not found to significantly progress at 18-month and 36-month follow-up. However, when comparing the subset of subjects with and without radiographic OA, subjects with early CMC OA who had 1 stage of radiographic progression were found to have a significantly higher intensity of pain on the PRWHE pain subscale at 36-month follow-up.

Rates of and Risk Factors for Trigger Finger after Open Carpal Tunnel Release.

Background We have anecdotally noticed a higher rate of trigger fingers (TFs) developing in patients who have undergone carpal tunnel release (CTR). Questions/Objective Is the rate of TFs after CTR greater compared to the nonoperative hand? Is the thumb more commonly involved postoperatively compared with spontaneous TFs? Do particular associated comorbidities increase this risk? Patients and Methods We queried our institutional database for patients who had undergone open CTR during a 2-year period and recorded the development of an ipsilateral TF after a CTR or a contralateral TF in the nonoperative hand. Patient demographics, comorbidities, concurrent initial procedures, time to diagnosis, and finger involvement were recorded. Results A total of 435 patients underwent 556 CTRs during this period. Furthermore, 46 ipsilateral TFs developed in 38 of 556 cases (6.83%) at an average of 228.1 ± 195.7 days after surgery. The thumb was most commonly involved (37.0%) followed by the ring finger (28.3%). The incidence rate of TF in the nonoperative hand during this period was 2.7%, with the ring finger and middle finger most commonly involved (33.3 and 28.6%, respectively). Only history of prior TF in either hand was found to be a significantly associated on Chi-square analysis and multivariable regression ( p < 0.001). Conclusion In patients with carpal tunnel syndrome, ipsilateral TFs occurred after 6.83% of CTRs, compared with a rate of 2.7% in the nonoperative hand, making it an important possible outcome to discuss with patients. The thumb was more commonly involved in triggering in the surgical hand compared with the nonoperative hand. Patients with a history of prior TFs in either hand were more likely to develop an ipsilateral TF after CTR. Level of Evidence This is a Level III, retrospective study.

Medical Product Development Part 2: Patent and FDA Issues.

In part 2 of this review series on how to engage with the medical device industry as a surgeon, we summarize the patent application process. The federal government must approve any invention you might try to bring to market as safe-to-use for patients before any marketing can be initiated via the Food and Drug Administration submission process detailed herein.

Total Wrist Arthroplasty Alignment and Its Potential Association with Clinical Outcomes.

Purpose There is a lack of quantitative research that describes the alignment and, more importantly, the effects of malalignment on total wrist arthroplasty (TWA). The main goal of this pilot study was to assess the alignment of TWA components in radiographic images and compare them with measures computed by three-dimensional analysis. Using these measures, we then determined if malalignment is associated with range of motion (ROM) or clinical outcomes (PRWHE, PROMIS, QuickDash, and grip strength). Methods Six osteoarthritic patients with a single type of TWA were recruited. Radiographic images, computed tomography images, and clinical outcomes of the wrists were recorded. Using posteroanterior and lateral radiographs, alignment measurements were defined for the radial and carpal components. Radiographic measurements were validated with models reconstructed from computed tomography images using Bland-Altman analysis. Biplanar videoradiography (<1mm and <1 degree accuracy) was used to capture and compute ROM of the TWA components. Linear regression assessed the associations between alignment and outcomes. Results Radiographic measures had a 95% limit-of-agreement (mean difference ± 1.96 × SD) of 3 degrees and 3mm with three-dimensional values, except for the measures of the carpal component in the lateral view. In our small cohort, wrist flexion-extension and radial-ulnar deviation were correlated with volar-dorsal tilt and volar-dorsal offset of the radial component and demonstrated a ROM increase of 3.7 and 1.6 degrees per degree increase in volar tilt, and 10.8 and 4.2 degrees per every millimeter increase in volar offset. The carpal component's higher volar tilt was also associated with improvements in patient-reported pain. Conclusions We determined metrics describing the alignment of TWA, and found the volar tilt and volar offset of the radial component could potentially influence the replaced wrist's ROM. Clinical Relevance TWA component alignment can be measured reliably in radiographs, and may be associated with clinical outcomes. Future studies must evaluate its role in a larger cohort.

Biomechanics of the Distal Radioulnar Joint During In Vivo Forearm Pronosupination.

Background Ulnar variance (UV) and center of rotation (COR) location at the level of the distal radioulnar joint (DRUJ) change with forearm rotation. Nevertheless, these parameters have not been assessed dynamically during active in vivo pronosupination. This assessment could help us to improve our diagnosis and treatment strategies. Questions/purposes We sought to (1) mathematically model the UV change, and (2) determine the dynamic COR's location during active pronosupination. Methods We used biplanar videoradiography to study DRUJ during in vivo pronation and supination in nine healthy subjects. UV was defined as the proximal-distal distance of ulnar fovea with respect to the radial sigmoid notch, and COR was calculated using helical axis of motion parameters. The continuous change of UV was evaluated using a generalized linear regression model. Results A second-degree polynomial with R 2 of 0.85 was able to model the UV changes. Maximum negative UV occurred at 38.0 degrees supination and maximum positive UV occurred at maximum pronation. At maximum pronation, the COR was located 0.5 ± 1.8 mm ulnarly and 0.6 ± 0.8 mm volarly from the center of the ulnar fovea, while at maximum supination, the COR was located 0.2 ± 0.6 mm radially and 2.0 ± 0.5 mm volarly. Conclusion Changes in UV and volar translation of the COR are nonlinear at the DRUJ during pronosupination. Clinical Relevance Understanding the dynamic nature of UV as a function of pronosupination can help guide accurate evaluation and treatment of wrist pathology where the UV is an important consideration. The dynamic behavior of COR might be useful in designing DRUJ replacement implants to match the anatomical motion.

Medical Product Development Part 1: Idea, Partnerships, and Commercialization.

The global orthopedic devices market is expected to reach nearly $72 billion by 2026, representing 12% of the projected global medical devices market. The vantage point of surgeons conveniently places them at the crossroads of surgery, therapy, and inpatient and outpatient dynamics, providing fertile ground for the invention of medical devices. This review article aims to provide an overview for how surgeons should take on launching a product in the medical device industry. In Part 1, we cover idea development, industry partnerships, and commercialization. Part 2 will cover the patent and United States Food and Drug Administration submission processes.

In vivo articular contact pattern of a total wrist arthroplasty design.

Total wrist arthroplasty (TWA) designs suffer from relatively high complication rates when compared to other arthroplasties. Understanding the contact pattern of hip and knee replacement has improved their design and function; however, the in vivo contact pattern of TWA has not yet been examined and is thus the aim of this study. We hypothesized that the center of contact (CoC) is located at the geometric centers of the carpal component and radial component in the neutral posture and that the CoC moves along the principal arcs of curvature throughout primary anatomical motions. Wrist motion and implant kinematics of six patients with the Freedom® total wrist implant were studied during various tasks using biplanar videoradiography. The location of the CoC of the components was investigated by calculating distance fields between the articular surfaces. We found the CoC at the neutral posture was not at the geometric centers but was located 3.5 mm radially on the carpal component and 1.2 mm ulnarly on the radial component. From extension to flexion, the CoC moved 10.8 mm from dorsal to volar side on the carpal component (p < 0.0001) and 7.2 mm from volar to dorsal on the radial component (p = 0.0009). From radial to ulnar deviation, the CoC moved 12.4 mm from radial to ulnar on the carpal component (p < 0.0001), and 5.6 mm from ulnar to radial on the radial component (p = 0.009). The findings of this study may eventually improve TWA success by advancing future designs through a more accurate understating of their kinematic performance in vivo.

The Weekend Warrior: Common Hand and Wrist Injuries in Athletes.

Weekend warriors are individuals who condense their weekly physical activity into extended intervals over one or two days.1 Excessive physical activity can result in a multitude of overuse and traumatic upper extremity injuries. The purpose of this review is to highlight the etiology and management of the more common hand and wrist injuries in athletes.

Characteristics and Publication Rates for Podium Presentations at National Hand Surgery Meetings from 2007 to 2012.

The purpose of this study was to evaluate and compare the research presented at the annual meetings of the American Society for Surgery of the Hand (ASSH) and the American Association for Hand Surgery (AAHS). Podium presentation data were extracted from the abstract books of the annual meetings of the ASSH and AAHS from 2007 to 2012. Corresponding publications were identified using searchable online publication databases and an algorithm linking authorship and content. The majority of research was clinical and the most common topics were trauma, degenerative conditions, and biomechanics. The most common body region of interest was the wrist/forearm. ASSH podium presentations were of a stronger level of evidence and were more likely to be published. The mean times to publication for research presented at the ASSH and AAHS meetings were 16.7 and 16.4 months, respectively. Presentations from each society were subsequently published at higher proportions in their affiliated journals. Furthermore, in comparison to AAHS presentations, a significantly larger proportion of research presented at the ASSH meetings was published in the Journal of Bone and Joint Surgery , while a larger proportion of AAHS presentations were published in Plastic and Reconstructive Surgery and Microsurgery .

Current Concepts in the Management of Trigger Finger in Adults.

Trigger finger (TF) is one of the most common causes of hand disability. Immobilization of TF with a joint-blocking orthosis has been demonstrated to effectively relieve pain and improve function. The efficacy of steroid injections for TF varies based on the number of affected digits and the clinical severity of the condition. Up to three repeat steroid injections are effective in most patients. When conservative interventions are unsuccessful, open surgical release of the A1 pulley effectively alleviates the subjective and objective manifestations of TF and currently remains the benchmark procedure for addressing TF. Although several studies have emerged suggesting that a percutaneous approach may result in improved outcomes, this technique demands a learning curve that may predispose patients to higher risk of procedure-related complications. There is no role for preoperative antibiotics in patients who undergo elective soft-tissue procedures of the hand. WALANT anesthesia has gained popularity because it has been associated with improved patient outcomes and a clear cost savings; however, proper patient selection is critical. Similar to other soft-tissue hand procedures, TF surgery rarely necessitates a postoperative opioid prescription.

Proximal-distal shift of the center of rotation in a total wrist arthroplasty is more than twice of the healthy wrist.

Reproduction of healthy wrist biomechanics should minimize the abnormal joint forces that could potentially result in the failure of a total wrist arthroplasty (TWA). To date, the in vivo kinematics of TWA have not been measured and it is unknown if TWA preserves healthy wrist kinematics. Therefore, the purpose of this in vivo study was to determine the center of rotation (COR) for a current TWA design and to compare its location to the healthy wrist. The wrist COR for six patients with TWA and 10 healthy subjects were calculated using biplane videoradiography as the subjects performed various range-of-motion and functional tasks that included coupled wrist motions. An open-source registration software, Autoscoper, was used for model-based tracking and kinematics analysis. It was demonstrated that the COR was located near the centers of curvatures of the carpal component for the anatomical motions of flexion-extension and radial-ulnar deviation. When compared to healthy wrists, the COR of TWAs was located more distal in both pure radial deviation (P < .0001) and pure ulnar deviation (P = .07), while there was no difference in its location in pure flexion or extension (P = .99). Across all coupled motions, the TWA's COR shifted more than two times that of the healthy wrists in the proximal-distal direction (17.1 vs 7.2 mm). We postulate that the mismatch in the COR location and behavior may be associated with increased loading of the TWA components, leading to an increase in the risk of component and/or interface failure.

The Intersection of Hand Surgery Practice and Industry.

This article focuses on the working relationship between practicing hand surgeons and company representatives. The basic job of reps is to influence surgeon behavior to use their products. Surgeons must make certain that nothing of value is received in a quid pro quo for using industry products. Physicians have an ethical obligation to only use industry devices that are in the best interests of their patients. Hand surgeons may become involved in product development and thereby come into contact with industry. Several key steps are required to protect any intellectual property surgeons develop in their interactions with industry.