Confined microemulsions: pore diameter induced change of the phase behavior.

In the present work, the temperature-dependent phase behavior of a C10E4 based microemulsion is studied in different meso-macroporous glasses, as a function of their pore diameter. The phase behavior in these pores is investigated by small-angle X-ray scattering (SAXS). The crucial parameter we discuss based on the SAXS results is the domain size of the bicontinuous phase. Using a simplified model to fit the scattering data, we can observe the microemulsion inside the pores. These experiments reveal a temperature-dependent change in domain sizes of the bicontinuous microemulsion only for large pores.

Mobility of bound water in PNIPAM microgels.

Polymer-solvent interactions play a crucial role in the stimuli-responsive behaviour of polymer networks. They influence the swelling/deswelling behaviour as well as the dynamics of the polymer chains. Scattering experiments provide insight into the polymer-water interaction of poly(N-isopropylacrylamide) (PNIPAM) microgels cross-linked with N,N'-methylenebisacrylamide (BIS) in dried and humidified state. The water mobility is studied by means of neutron spin-echo spectroscopy and neutron backscattering spectroscopy. The residual water amount has been determined with Karl Fischer titration. For both degrees of humidification, the relaxation time of the water molecules is much larger than that of free water due to the strong interactions with the polymer network and is only weakly depending on temperature and length scale of observation. The possible influence of the water on methyl group rotations is discussed.

Understanding near-surface polymer dynamics by a combination of grazing-incidence neutron scattering and virtual experiments.

Neutron spin-echo spectroscopy is a unique experimental method for the investigation of polymer dynamics. The combination of neutron spin-echo spectroscopy with grazing-incidence geometry (GINSES) opens the possibility to probe the dynamics of soft-matter materials in the vicinity of the solid substrate in the time range up to 100 ns. However, the usage of the GINSES technique has some peculiarities and, due to the novelty of the method and complexity of the scattering geometry, difficulties in further data analysis occur. The current work discusses how virtual experiments within the distorted-wave Born approximation using the BornAgain software can improve GINSES data treatment and aid the understanding of polymer dynamics in the vicinity of the solid surface. With two examples, poly(N-isopropyl acrylamide) brushes and poly(ethylene glycol) microgels on Si surfaces, the simulation as well as the application of the simulation to the GINSES data analysis are presented. The approach allowed a deeper insight to be gained of the background effect and scattering contribution of different layers.

Surfactant Monolayer Bending Elasticity in Lipase Containing Bicontinuous Microemulsions.

Lipase-catalyzed reactions offer many advantages among which a high degree of selectivity combined with the possibility to convert even non-natural substrates are of particular interest. A major drawback in the applicability of lipases in the conversion of synthetically interesting, non-natural substrates is the substantial insolubility of such substrates in water. The conversion of substrates, natural or non-natural, by lipases generally involves the presence of a water-oil interface. In the present paper, we exploit the fact that the presence of lipases, in particular the lipase from Candida antarctica B (CalB), changes the bending elastic properties of a surfactant monolayer in a bicontinuous microemulsion consisting of D2O/NaCl -n-(d)-octane-pentaethylene glycol monodecyl ether (C10E5) in a similar manner as previously observed for amphiphilic block-copolymers. To determine the bending elastic constant, we have used two approaches, small angle neutron scattering (SANS) and neutron spin echo (NSE) spectroscopy. The time-averaged structure from SANS showed a slight decrease in bending elasticity, while on nanosecond time scales as probed with NSE, a stiffening has been observed, which was attributed to adsorption/desorption mechanisms of CalB at the surfactant monolayer. The results allow to derive further information on the influence of CalB on the composition and bending elasticity of the surfactant monolayer itself as well as the underlying adsorption/desorption mechanism.

Inner structure and dynamics of microgels with low and medium crosslinker content prepared via surfactant-free precipitation polymerization and continuous monomer feeding approach.

The preparation of poly(N-isopropylacrylamide) microgels via classical precipitation polymerization (batch method) and a continuous monomer feeding approach (feeding method) leads to different internal crosslinker distributions, i.e., from core-shell-like to a more homogeneous one. The internal structure and dynamics of these microgels with low and medium crosslinker concentrations are studied with dynamic light scattering and small-angle neutron scattering in a wide q-range below and above the volume phase transition temperature. The influence of the preparation method, and crosslinker and initiator concentration on the internal structure of the microgels is investigated. In contrast to the classical conception where polymer microgels possess a core-shell structure with the averaged internal polymer density distribution within the core part, a detailed view of the internal inhomogeneities of the PNIPAM microgels and the presence of internal domains even above the volume phase transition temperature, when polymer microgels are in the deswollen state, are presented. The correlation between initiator concentration and the size of internal domains that appear inside the microgel with temperature increase is demonstrated. Moreover, the influence of internal inhomogeneities on the dynamics of the batch- and feeding-microgels studied with neutron spin-echo spectroscopy is reported.

A comparison of the network structure and inner dynamics of homogeneously and heterogeneously crosslinked PNIPAM microgels with high crosslinker content.

Poly(N-isopropylacrylamide) microgel particles were prepared via a "classical" surfactant-free precipitation polymerization and a continuous monomer feeding approach. It is anticipated that this yields microgel particles with different internal structures, namely a dense core with a fluffy shell for the classical approach and a more even crosslink distribution in the case of the continuous monomer feeding approach. A thorough structural investigation of the resulting microgels with dynamic light scattering, atomic force microscopy and small angle neutron scattering was conducted and related to neutron spin echo spectroscopy data. In this way a link between structural and dynamic features of the internal polymer network was made.

DLS Setup for in Situ Measurements of Photoinduced Size Changes of Microgel-Based Hybrid Particles.

Photoinduced size changes in microgel particles loaded with gold nanoparticles (AuNPs) were investigated with an extended multiangle dynamic light scattering (DLS) setup. The DLS setup was equipped with a conventional laser (λ = 633 nm) to determine the microgel particle size. Additionally, a laser (λ = 532 nm) is installed to study the photoresponsive behavior of the AuNP-microgel hybrids. The wavelength of 532 nm is close to the absorption maximum of the plasmon resonance of the AuNPs used in the present study (i.e. spherical AuNPs with a diameter of 14 nm). The extended DLS setup enables us to follow in situ the change in microgel size during irradiation. The light stimulus is directly correlated with the size changes of the hybrid particles and the photothermal effect depends on the intensity of the excitation laser. The increase in excitation laser intensity results in a size reduction of hybrid particles because of the ability of AuNPs to partially transform the absorbed photon energy into heat which is emitted into the surrounding microgel network.

Sugar Surfactant Based Microemulsions at Solid Surfaces: Influence of the Oil Type and Surface Polarity.

The structure of sugar-surfactant-based bicontinuous microemulsions in the bulk and at hydrophilic and hydrophobic solid planar surfaces was studied by means of neutron scattering techniques (SANS, NR, and GISANS). In particular, the influence of the type of oil (tetradecane and methyl oleate) on the structural properties in the vicinity of surfaces was investigated at different oil-to-water ratios. In the case of hydrophilic surfaces, the analysis of the scattering length density profiles reveals an induced ordering of the oil and water domains perpendicular to the solid-liquid interface in both sets of microemulsions. At hydrophobic surfaces, differences in the near-surface ordering between microemulsions containing polar and nonpolar oils are observed.

Extraction of model contaminants from solid surfaces by environmentally compatible microemulsions.

In the present contribution, we evaluate the efficiency of eco-friendly microemulsions to decontaminate solid surfaces by monitoring the extraction of non-toxic simulants of sulfur mustard out of model surfaces. The extraction process of the non-toxic simulants has been monitored by means of spectroscopic and chromatographic techniques. The kinetics of the removal process was analyzed by different empirical models. Based on the analysis of the kinetics, we can assess the influence of the amounts of oil and water and the microemulsion structure on the extraction process.

Two-Dimensional Aggregation and Semidilute Ordering in Cellulose Nanocrystals.

The structural properties and aggregation behavior of carboxymethylated cellulose nanocrystals (CNC-COOH) were analyzed with small angle neutron scattering (SANS), transmission electron microscopy (TEM), atomic force microscopy (AFM), and dynamic light scattering (DLS) and compared to sulfuric acid hydrolyzed cellulose nanocrystals (CNC-SO3H). The CNC-COOH system, prepared from single carboxymethylated cellulose nanofibrils, was shown to laterally aggregate into 2D-stacks that were stable both in bulk solution and when adsorbed to surfaces. CNC-SO3H also showed a 2D aggregate structure with similar cross sectional dimensions (a width to height ratio of 8) as CNC-COOH, but a factor of 2 shorter length. SANS and DLS revealed a reversible ordering of the 2D aggregates under semidilute conditions, and a structure peak was observed for both systems. This indicates an early stage of liquid crystalline arrangement of the crystal aggregates, at concentrations below those assessed using birefringence or polarized optical microscopy.

Ethylene glycol-based microgels at solid surfaces: swelling behavior and control of particle number density.

The adsorption of ethylene glycol (EG)-based microgel particles at silicon surfaces was investigated. Monodisperse p-MeO2MA-co-OEGMA microgel particles were synthesized by precipitation polymerization. Particle size and the volume phase transition temperature (VPTT) can be tailored by changing the amount of comonomer. The effect of geometrical confinement on the microgel particles was studied at the solid/liquid interface. Therefore, layer formation, particle number density, and swelling/deswelling at the surface were studied in dependence on the spin-coating preparation parameters and characterized by means of AFM against ambient conditions. The deswelling/swelling behavior was investigated by AFM in the water-swollen state.

Inner structure of adsorbed ionic microgel particles.

Microgel particles of cross-linked poly(NIPAM-co-acrylic acid) with different acrylic acid contents are investigated in solution and in the adsorbed state. As a substrate, silicon with a poly(allylamine hydrochloride) (PAH) coating is used. The temperature dependence of the deswelling of the microgel particles was probed with atomic force microscopy (AFM). The inner structure of the adsorbed microgel particles was detected with grazing incidence small angle neutron scattering (GISANS). Small angle neutron scattering (SANS) on corresponding microgel suspensions was performed for comparison. Whereas the correlation length of the polymer network shows a divergence in the bulk samples, in the adsorbed microgel particles it remains unchanged over the entire temperature range. In addition, GISANS indicates changes in the particles along the surface normal. This suggests that the presence of a solid surface suppresses the divergence of internal fluctuations in the adsorbed microgels close to the volume phase transition.

An enzyme containing microemulsion based on skin friendly oil and surfactant as decontamination medium for organo phosphates: phase behavior, structure, and enzyme activity.

The present contribution presents a microemulsion system containing cosmetic oil and sugar surfactant and the enzyme diisopropyl fluorophosphatase (DFPase) as active agent for the decontamination of human skin. The bicontinuous structure and the physical properties of the microemulsion are characterized by dynamic light scattering and small angle neutron scattering. The DFPase from the squid Loligo vulgaris is catalyzing the hydrolysis of highly toxic organophosphates. The effect of the enzyme on the structure of the microemulsion is investigated. Moreover, the enzyme/microemulsion system is also studied with respect to its activity using nuclear magnetic resonance spectroscopy leading to promising results. A fast decomposition of the nerve agent sarin is achieved.

Interaction of gold nanoparticles with thermoresponsive microgels: influence of the cross-linker density on optical properties.

The interaction of spherical gold nanoparticles (Au-NPs) with microgels composed of chemically cross-linked poly-(N-isopropylacrylamide) is reported. Simple mixing of the two components leads to adsorption of the gold particles onto the microgels. Different loading densities can be achieved by varying the ratio of gold particles to microgel particles. The adsorption of gold nanoparticles is analysed by TEM, UV-Vis absorption spectroscopy and SAXS. The influence of the microgel mesh size on the adsorption of gold nanoparticles is investigated by using microgels with three different cross-linker densities. The results suggest a strong relationship between the nanoparticle penetration depth and the cross-linker density. This, in turn, directly influences the optical properties of the colloids due to plasmon resonance coupling. In addition, information about the mesh size distribution of the microgels is obtained. For the first time the change in optical properties by varying cross-linker density and temperature is directly related to the formation of dimers of gold particles, proven by SAXS.

The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions: structure, dynamics, and enzyme activity.

The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure.

Temperature dependence of the surfactant film bending elasticity in a bicontinuous sugar surfactant based microemulsion: a quasielastic scattering study.

Currently, the design of microemulsions is focussed on the formulation of environmentally compatible systems formed by non-harmful amphiphiles and oils. The use of sugar-based surfactants allows the design of microemulsions where, instead of the temperature, the addition of short- or medium-chain alcohols tunes the curvature of the amphiphilic interface. In this work, the resulting temperature stability of a sugar surfactant and rapeseed methyl ester based bicontinuous microemulsion is exploited to study the influence of temperature variations on the bending elastic constant κ. Quasi-elastic scattering of light and neutrons is used to separate long-range collective motions and local thermally excited undulations of the interface. κ in units of kT is found to be independent of temperature over a wide range.

Monitoring the hydrolysis of toxic organophosphonate nerve agents in aqueous buffer and in bicontinuous microemulsions by use of diisopropyl fluorophosphatase (DFPase) with (1)H- (31)P HSQC NMR spectroscopy.

The enzyme diisopropyl fluorophosphatase (DFPase, EC 3.1.8.2) from the squid Loligo vulgaris effectively catalyzes the hydrolysis of diisopropyl fluorophosphate (DFP) and a number of organophosphorus nerve agents, including sarin, soman, cyclosarin, and tabun. Until now, determination of kinetic data has been achieved by use of techniques such as pH-stat titration, ion-selective electrodes, and a recently introduced method based on in situ Fourier-transform infrared (FTIR) spectroscopy. We report the use of 1D (1)H-(31)P HSQC NMR spectroscopy as a new method for real-time quantification of the hydrolysis of toxic organophosphonates by DFPase. The method is demonstrated for the agents sarin (GB), soman (GD), and cyclosarin (GD) but can also be used for V-type nerve agents, for example VX. Besides buffered aqueous solutions the method was used to determine enzymatic activities in a biodiesel-based bicontinuous microemulsion that serves as an example of complex decontamination media, for which other established techniques often fail. The method is non-invasive and requires only limited manual handling of small volumes of liquid (700 microL), which adds to work safety when handling highly toxic organophosphorus compounds. Limits of detection are slightly below 100 micromol L(-1) on a 400 MHz spectrometer with 16 FIDs added for a single time frame. The method is not restricted to DFPase but can be used with other phosphotriesterases, for example paraxonase (PON), and even reactive chemicals, for example oximes and other nucleophiles, as long as the reaction components are compatible with the NMR experiment.

Thermoresponsive core-shell microgels with silica nanoparticle cores: size, structure, and volume phase transition of the polymer shell.

Core-shell microgels made of the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) and silica nanoparticles as inorganic cores were investigated by dynamic light scattering (DLS) and small angle neutron scattering (SANS). In order to study the response of the particles upon changes of temperature, experiments were done in a temperature interval close to the volume phase transition temperature of the PNIPAM shell. While DLS probes the hydrodynamic dimensions of the particles, determining their centre of mass diffusion, SANS provides the correlation length xi of the PNIPAM network. Additionally, the composite particles were characterised by electron microscopy as well as atomic force microscopy to reveal the core-shell structure and at the same time the approximate dimensions and the shape of the microgels.

Temperature, pH, and ionic strength induced changes of the swelling behavior of PNIPAM-poly(allylacetic acid) copolymer microgels.

The volume phase transition of colloidal microgels made of N-isopropylacrylamide (NIPAM) is well-studied and it is known that the transition temperature can be influenced by copolymerization. A series of poly( N-isopropylacrylamide- co-allylacetic acid) copolymers with different contents of allylacetic acid (AAA) was synthesized by means of a simple radical polymerization approach. The thermoresponsive behavior of these particles was studied using dynamic light scattering (DLS). Further characterization was done by employing transmission electron microscopy (TEM) and zeta potential measurements. TEM observations reveal the approximately spherical shape and low polydispersity of the copolymer particles. In addition, the measured zeta potentials provide information about the relative surface charge. Since these copolymers are much more sensitive to external stimuli such as pH and ionic strength than their pure PNIPAM counterparts, the volume phase transition was investigated at two different pH values and various salt concentrations. At pH 10 for the copolymer microgels with the highest AAA content, a significant shift of the volume phase transition temperature toward higher values is found. For higher AAA content, a change in pH from 8 to 10 can induce a change in radius of up to 100 nm making the particles interesting as pH controlled actuators.