Design of Power Amplifiers for BDS-3 Terminal Based on InGaP/GaAs HBT MMIC and LGA Technology.

With the development and popularization of the Beidou-3 navigation satellite system (BDS-3), to ensure its unique short message function, it is necessary to integrate a radio frequency (RF) transmitting circuit with high performance in the BDS-3 terminal. As the key device in an RF transmitting circuit, the RF power amplifier (PA) largely determines the comprehensive performance of the circuit with its transmission power, efficiency, linearity, and integration. Therefore, in this paper, an L-band highly integrated PA chip compatible with 3 W and 5 W output power is designed in InGaP/GaAs heterojunction bipolar transistor (HBT) technology combined with temperature-insensitive adaptive bias technology, class-F harmonic suppression technology, analog pre-distortion technology, temperature-insensitive adaptive power detection technology, and land grid array (LGA) packaging technology. Additionally, three auxiliary platforms are proposed, dedicated to the simulation and optimization of the same type of PA designs. The simulation results show that at the supply voltage of 5 V and 3.5 V, the linear gain of the PA chip reaches 39.4 dB and 38.7 dB, respectively; the output power at 1 dB compression point (P1dB) reaches 37.5 dBm and 35.1 dBm, respectively; the saturated output power (Psat) reaches 38.2 dBm and 36.2 dBm, respectively; the power added efficiency (PAE) reaches 51.7% and 48.2%, respectively; and the higher harmonic suppression ratios are less than -62 dBc and -65 dBc, respectively. The size of the PA chip is only 6 × 4 × 1 mm3. The results also show that the PA chip has high gain, high efficiency, and high linearity under both output power conditions, which has obvious advantages over similar PA chip designs and can meet the short message function of the BDS-3 terminal in various application scenarios.

High-precision angular rate detection based on an optomechanical micro hemispherical shell resonator gyroscope.

Cavity optomechanics with picometer displacement measurement resolution has shown vital applications in high-precision sensing areas. In this paper, an optomechanical micro hemispherical shell resonator gyroscope (MHSRG) is proposed, for the first time. The MHSRG is driven by the strong opto-mechanical coupling effect based on the established whispering gallery mode (WGM). And the angular rate is characterized by measuring the transmission amplitude changing of laser coupled in and out from the optomechanical MHSRG based on the dispersive resonance wavelength shift and/or dissipative losses varying. The detailed operating principle of high-precision angular rate detection is theoretically explored and the fully characteristic parameters are numerically investigated. Simulation results show that the optomechanical MHSRG can achieve scale factor of 414.8 mV/ (°/ s) and angular random walk of 0.0555 °/ h1/2 when the input laser power is 3 mW and resonator mass is just 98 ng. Such proposed optomechanical MHSRG can be widely used for chip-scale inertial navigation, attitude measurement, and stabilization.

Design of a high-Q dark hollow beam cavity based on a one-dimensional topological photonic crystal.

Dark hollow beams (DHBs) possess great potential for material processing, holography, and vortex beams, and thus designing a high-Q DHB cavity is significant for these applications. In this Letter, a method of designing and optimizing a high-Q DHB cavity based on a one-dimensional topological photonic crystal (TPhC) is proposed. Furthermore, how the structural parameters control the performance of the cavity is analyzed with the help of finite-element-method (FEM) simulation. According to the simulation results, the Q factor of the designed cavity can reach the order of 105 with only 19 periods of layers. It is critical to mention that, although increasing the layers can improve the average Q of the cavity, it will cause serious fluctuation of both the Q factor and the divergence angle of the output beam. The design method proposed in this Letter may not only help designers of future DHB lasers but also promote the applications of DHBs in various fields.

High-FOM Temperature Sensing Based on Hg-EIT-Like Liquid Metamaterial Unit.

High-performance temperature sensing is a key technique in modern Internet of Things. However, it is hard to attain a high precision while achieving a compact size for wireless sensing. Recently, metamaterials have been proposed to design a microwave, wireless temperature sensor, but precision is still an unsolved problem. By combining the high-quality factor (Q-factor) feature of a EIT-like metamaterial unit and the large temperature-sensing sensitivity performance of liquid metals, this paper designs and experimentally investigates an Hg-EIT-like metamaterial unit block for high figure-of-merit (FOM) temperature-sensing applications. A measured FOM of about 0.68 is realized, which is larger than most of the reported metamaterial-inspired temperature sensors.

Research on the reflection-type ELC-based optomechanical metamaterial.

In this paper, we propose a new kind of optomechanical metamaterial based on a planar ELC-type absorbing structure fabricated on the low-loss flexible substrate. The nonlinear coupling mechanism and nonlinear response phenomenon of the proposed optomechanical metamaterial driven by electromagnetic induced force are analyzed theoretically. The mechanical deformation/displacement and the mechanical resonance frequency shift of the metamaterial unit deposed on the flexible substrate are also numerically and experimentally demonstrated to reveal the coupling phenomenon of electromagnetic field and mechanical field. These results will help researchers to further understand the multi-physics interactions of optomechanical metamaterials and will promote the developments of new type of metasurface for high-efficiency dynamic electromagnetic wave controlling and formatting.

Thermally tunable high-Q metamaterial and sensing application based on liquid metals.

Achieving a high Q-factor metamaterial unit for a precision sensing application is highly demanded in recent years, and most of the developed high-performance sensors based on the high-Q metamaterial units are due to the dielectric/magnetic property changes of the substrate/superstrate. In this paper, we propose a completely different sensing metamaterial unit configuration, with good sensing sensitivity and precision properties, based on the thermally tunable liquid metals. Specifically, a basic thermally tunable metamaterial unit, the mercury-inspired split ring resonator (SRR), is firstly presented to theoretically show the magnetic resonance and negative permeability frequency band shift properties under different background temperatures. Then, considering the radiation loss mechanism of the conventional SRR metamaterial unit and based on the physically reliable ability of liquid metals, the modified mercury-inspired Fano and toroidal resonators with a large frequency tuning range and high Q-factor are developed and discussed. The numerical demonstrations have shown that the designed Fano and toroidal resonators have much better sensing precision performances compared to the conventional SRR for the temperature sensing application. The experimental demonstrations have also been used to verify the proposed mercury-based toroidal resonators, and good agreements are achieved.

Nonlinear coupling states study of electromagnetic force actuated plasmonic nonlinear metamaterials.

Electromagnetic force actuated plasmonic nonlinear metamaterials have attracted a great deal of interest from the scientific community over the past several years, owing to the abundant interactions between the electromagnetically induced Ampère's force and the stored mechanical force within the meta-atoms. Despite this interest, a comprehensive study of such metamaterials is still lacking, especially for the nonlinear coupling states analysis. Here we fill this gap by extensively studying the physics of electromagnetic force actuated plasmonic nonlinear metamaterials and presenting a number of new significant findings. Our study will help physicists and engineers to better understand this hot topic and stimulate rapid developments of this promising nonlinear metamaterials.

A low-frequency chip-scale optomechanical oscillator with 58 kHz mechanical stiffening and more than 100th-order stable harmonics.

For the sensitive high-resolution force- and field-sensing applications, the large-mass microelectromechanical system (MEMS) and optomechanical cavity have been proposed to realize the sub-aN/Hz1/2 resolution levels. In view of the optomechanical cavity-based force- and field-sensors, the optomechanical coupling is the key parameter for achieving high sensitivity and resolution. Here we demonstrate a chip-scale optomechanical cavity with large mass which operates at ≈77.7 kHz fundamental mode and intrinsically exhibiting large optomechanical coupling of 44 GHz/nm or more, for both optical resonance modes. The mechanical stiffening range of ≈58 kHz and a more than 100th-order harmonics are obtained, with which the free-running frequency instability is lower than 10-6 at 100 ms integration time. Such results can be applied to further improve the sensing performance of the optomechanical inspired chip-scale sensors.

Controllable optomechanical coupling and Drude self-pulsation plasma locking in chip-scale optomechanical cavities.

We demonstrate the controllable optomechanical coupling and Drude self-pulsation plasma locking in chip-scale optomechanical cavities. The optomechanical coupling between the optical and mechanical degrees-of-freedom is dependent on the intracavity energy via the coupled fiber position. With the deterministic optomechanical stiffening, the interaction between optomechanical oscillation and self-pulsation can be controlled. Intracavity locking with 1/6 subharmonics is obtained over a wide optical detuning range of 190.01-192.23 THz. These results bring new insights into implementations of nonlinear dynamics at mesoscopic scale, with potential applications from photonic signal processing to nonlinear dynamic networks.

Numerical and theoretical analysis on the absorption properties of metasurface-based terahertz absorbers with different thicknesses.

In this paper, we numerically and theoretically discuss the novel absorption properties of a conventional metasurface-based terahertz (THz) electromagnetic (EM) absorber with different dielectric thicknesses. Two absorption modes are presented in the considered frequency band due to the increased dielectric thickness, and both modes can achieve near-unity absorptions when the dielectric layers reach additional nλ(d)/2 (n=1, 2) thicknesses, where λ(d) is the operating wavelength at the peak absorption in the dielectric slabs. The surface currents between the metasurface resonators and ground plane are not associated any longer, different from the conventional thin absorbers. Moreover, the EM wave energies are completely absorbed by the metasurface resonators and dielectric layer, and the main function of ground plane is to reflect the incident EM waves back to the resonators. The discussed novel absorption properties are analyzed and explained by classical EM theory and interference theory after numerical demonstrations. These findings can broaden the potential applications of the metasurface-based absorbers in the THz frequency range for different requirements.

An integrated low phase noise radiation-pressure-driven optomechanical oscillator chipset.

High-quality frequency references are the cornerstones in position, navigation and timing applications of both scientific and commercial domains. Optomechanical oscillators, with direct coupling to continuous-wave light and non-material-limited f × Q product, are long regarded as a potential platform for frequency reference in radio-frequency-photonic architectures. However, one major challenge is the compatibility with standard CMOS fabrication processes while maintaining optomechanical high quality performance. Here we demonstrate the monolithic integration of photonic crystal optomechanical oscillators and on-chip high speed Ge detectors based on the silicon CMOS platform. With the generation of both high harmonics (up to 59 th order) and subharmonics (down to 1/4), our chipset provides multiple frequency tones for applications in both frequency multipliers and dividers. The phase noise is measured down to -125 dBc/Hz at 10 kHz offset at ~400 µW dropped-in powers, one of the lowest noise optomechanical oscillators to date and in room-temperature and atmospheric non-vacuum operating conditions. These characteristics enable optomechanical oscillators as a frequency reference platform for radio-frequency-photonic information processing.

Experimental demonstration of a magnetically tunable ferrite based metamaterial absorber.

We synthesize and systematically characterize a novel type of magnetically tunable metamaterial absorber (MA) by integrating ferrite as a substrate or superstrate into a conventional passive MA. The nearly perfect absorption and tunability of this device is studied both numerically and experimentally within X-band (8-12 GHz) in a rectangular waveguide setup. Our measurements clearly show that the resonant frequency of the MA can be shifted across a wide frequency band by continuous adjustment of a magnetic field acting on the ferrite. Moreover, the effects of substrate/superstrate's thickness on the MA's tunability are discussed. The insight gained from the generic analysis enabled us to design an optimized tunable MA with relative frequency tuning range as larger as 11.5% while keeping the absorptivity higher than 98.5%. Our results pave a path towards applications with tunable devices, such as selective thermal emitters, sensors, and bolometers.

Tunable band notch filters by manipulating couplings of split ring resonators.

The couplings between single/dual split ring resonators (SRRs) and their mirror images in a rectangular waveguide are systematically investigated through theoretical analysis and experimental measurements. Such couplings can be manipulated mechanically by rotating the SRRs along a dielectric rod and/or shifting the SRRs up/down along the sidewall of the rectangular waveguide, resulting in shifts of the resonant frequencies and modulations of the resonant magnitudes. These controllable properties of SRRs pave the routers toward designing tunable band notch filters. In particular, it is experimentally demonstrated that the designed filters possess 7.5% tuning range in the X-band.

Configurable metamaterial absorber with pseudo wideband spectrum.

Metamaterials attain their behavior due to resonant interactions among their subwavelength components and thus show specific designer features only in a very narrow frequency band. There is no simple way to dynamically increase the operating bandwidth of a narrowband metamaterial, but it may be possible to change its central frequency, shifting the spectral response to a new frequency range. In this paper, we propose and experimentally demonstrate a metamaterial absorber that can shift its central operating frequency by using mechanical means. The shift is achieved by varying the gap between the metamaterial and an auxiliary dielectric slab parallel to its surface. We also show that it is possible to create multiple absorption peaks by adjusting the size and/or shape of the dielectric slab, and to shift them by moving the slab relative to the metamaterial. Specifically, using numerical simulations we design a microwave metamaterial absorber and experimentally demonstrate that its central frequency can be set anywhere in a 1.6 GHz frequency range. The proposed configuration is simple and easy to make, and may be readily extended to THz frequencies.