Study on dynamic characteristics of salinized silt under cyclic loading.

Under the repeated action of aircraft taxiing load, the subgrade plastic deformation becomes the key factor affecting the service performance of the airfields when salinized silt is used to fill the subgrade. In this study, the dynamic triaxial tests were carried out on a region in the northern part of China to study the effects of different salt contents on the dynamic characteristics of silt under cyclic loading. A prediction model for the salinized silt dynamic strength with a plastic strain of 4% as the failure criterion for the subgrade was thus proposed. It is found that with the increase of dynamic stress amplitude, the salinized silt plastic deformation transforms gradually from plastic deformation to incremental failure. The salt contents significantly influence the plastic strain and critical dynamic stress of silt. The strength of the salinized silt specimen is related to the ion concentration in the soil pores and the arrangement pattern of soil particles, as indicated by the progressive strength increase of the salinized silt at the low salt content of 1% and a further gradual decrease at high salt content.

Interleukin-6 and pulmonary hypertension: from physiopathology to therapy.

Pulmonary hypertension (PH) is a progressive, pulmonary vascular disease with high morbidity and mortality. Unfortunately, the pathogenesis of PH is complex and remains unclear. Existing studies have suggested that inflammatory factors are key factors in PH. Interleukin-6 (IL-6) is a multifunctional cytokine that plays a crucial role in the regulation of the immune system. Current studies reveal that IL-6 is elevated in the serum of patients with PH and it is negatively correlated with lung function in those patients. Since IL-6 is one of the most important mediators in the pathogenesis of inflammation in PH, signaling mechanisms targeting IL-6 may become therapeutic targets for this disease. In this review, we detailed the potential role of IL-6 in accelerating PH process and the specific mechanisms and signaling pathways. We also summarized the current drugs targeting these inflammatory pathways to treat PH. We hope that this study will provide a more theoretical basis for targeted treatment in patients with PH in the future.

[Contamination status and exposure risk of mycotoxins in Coicis Semen].

By investigating the contamination status and predicting the exposure risk of mycotoxin in Coicis Semen, we aim to provide guidance for the safety supervision of Chinese medicinal materials and the formulation(revision) of mycotoxin limit standards. The content of 14 mycotoxins in the 100 Coicis Semen samples collected from five major markets of Chinese medicinal materials in China was determined by UPLC-MS/MS. The probability evaluation model based on Monte Carlo simulation method was established after Chi-square test and One-way ANOVA of the sample contamination data. Health risk assessment was performed on the basis of margin of exposure(MOE) and margin of safety(MOS). The results showed that zearalenone(ZEN), aflatoxin B_1(AFB_1), deoxynivalenol(DON), sterigmatocystin(ST), and aflatoxin B_2(AFB_2) in the Coicis Semen samples had the detection rates of 84%, 75%, 36%, 19%, and 18%, and the mean contamination levels of 117.42, 4.78, 61.16, 6.61, and 2.13 µg·kg~(-1), respectively. According to the limit standards in the Chinese Pharmacopoeia(2020 edition), AFB_1, AFs and ZEN exceeded the standards to certain extents, with the over-standard rates of 12.0%, 9.0%, and 6.0%, respectively. The exposure risks of Coicis Semen to AFB_1, AFB2, ST, DON, and ZEN were low, while 86% of the samples were contaminated with two or more toxins, which needs more attention. It is suggested that the research on the combined toxicity of different mycotoxins should be strengthened to accelerate the cumulative exposure assessment of mixed contaminations and the formulation(revision) of toxin limit standards.

Movement pattern and upper extremity muscle activation during fast and slow continuous steering movement.

Continuous steering movement (CSM) is an essential component of the upper extremity (UE) task during vehicle driving, and could be a suitable candidate for multi-joint rehabilitation programs for patients with UE disabilities. This study aims to evaluate the UE muscle activation during CSM and how the rotating speed and direction affect CSM's kinematic and kinetic performance. Surface electromyography (EMG), hand contact information, and steering torque were measured under fast (180°/s) and slow (60°/s) constant-velocity CSM to reveal the activation of shoulder and elbow muscles, temporal characteristics, and force exertion during the stance and swing phases of a CSM cycle. Data from 24 normal young adults showed that shorter contact duration but higher force exertion occurred in the hand moving in an outward steering direction during only fast CSM in either the clockwise (CW) or counterclockwise (CCW) direction. During a steering cycle (either fast or slow speed), the triceps brachii, sternal part of the pectoralis major (PS), and posterior deltoid play major roles in generating steering torque in the CW direction of the CSM. In contrast, the PS, clavicular part of the pectoralis major (PC), and anterior deltoid (AD) largely contribute to torque generation during the CCW CSM. During the swing phase of CSM, AD, PC, and PS are the major muscles that move the hand for the next grasping of the steering wheel in all four conditions. Using the mean activation profiles of the major contributing muscles, the functional roles of these elbow and shoulder muscles were analyzed and are discussed herein. These findings help us to further understand the activation patterns of UE muscles and the kinematic and kinetic changes during two rotating directions and two speeds of CSM, and suggest important implications for future practice in clinical training.

Metabolites from the plant endophytic fungus Penicillium sp. CPCC 401423 and their cytotoxic activity against MIA PaCa-2 cells.

Twenty-two metabolites were isolated from Penicillium sp. CPCC 401423 cultured on rice. The structures of all compounds were elucidated mainly by MS and NMR analysis as well as the necessary CD experimental evidence, of which penicillidione A (1), penicillidione B (2), (E)-4-[(4-acetoxy-3-methyl-2-butenyl)oxy]phenylacetic acid (3), (S)-2-hydroxy-2-{4-[(3-methyl-2-butenyl)oxy]phenyl} (4), (S)-4-(2,3-dihydroxy-3-methyl-butoxy)phenylacetic acid (5), (E)-4-[(3-carboxy-2-butenyl)oxy]benzoic acid (6), (Z)-4-[(4-hydroxy-3-methyl-2-butenyl)oxy]benzoic acid (7), open-cycled N-demethylmelearoride A (12), and penostatin M (16) were identified as new compounds. The cytotoxic activity against human pancreatic carcinoma cell line MIA PaCa-2a was detected. Among them, compounds 13-15 and 22 displayed significant cytotoxicity against MIA-PaCa-2 cells with IC50 values of 8.9, 36.5, 31.8, and 22.3 µM, respectively (positive control gemcitabine IC50 65.0 µM).

Insights into the enhanced electrochemical performance of MnV2O6 nanoflakes as an anode material for advanced lithium storage.

Binary transition metal oxides (BTMOs) are regarded as potential anode materials for lithium-ion batteries (LIBs) owing to their low cost, high specific capacities, and environmental friendliness. In this work, MnV2O6 nanoflakes are successfully synthesized by a facile hydrothermal method. When evaluated as an anode material for LIBs, benefiting from the activation process, the as-prepared MnV2O6 nanoflake electrode delivers a high reversible specific capacity of 1439 mA h g-1 after 300 cycles at a current density of 200 mA g-1, and especially presents a specific capacity of 1010 mA h g-1 after 700 cycles at a higher current density of 1 A g-1. Furthermore, MnV2O6 shows a pleasurable rate capability; a reversible specific capacity of 867 mA h g-1 can be obtained at a current density of 2000 mA g-1, and when the current density is returned to 200 mA g-1 and continues for another 80 cycles, the specific capacity can still reach 1499 mA h g-1. Meanwhile, the morphology variation and electrochemical kinetic behavior of the MnV2O6 electrode during cycling are scrutinized in detail. After that, the electrochemical reaction mechanism of MnV2O6 during the discharge/charge process is corroborated by in situ X-ray diffraction (XRD), which involves the coexistence of a conversion reaction and solid solution behavior. The practical application of MnV2O6 nanoflakes as an anode material is examined as well. Sure enough, the NCM811//MnV2O6 full-cell exhibits excellent lithium-storage performance.

Association between Fear of Falling and Seven Performance-Based Physical Function Measures in Older Adults: A Cross-Sectional Study.

Fear of falling (FOF), a common phenomenon among older adults, may result in adverse health consequences. The strength of the association between FOF and physical function among older adults has not been well compared in previous studies. Therefore, a cross-sectional study was performed on 105 older adults to determine and compare the strength of the association between FOF and seven common physical function measures. After controlling for age, logistic regression models were fitted for each physical function measure. According to odds ratios, the Berg Balance Scale (BBS), Short Physical Performance Battery, gait speed, and Timed Up & Go Test were associated with the identification of FOF. Based on a c-statistic value of 0.76, the BBS, a common and quick assessment of functional balance tasks, was found to be able to distinguish between fearful and non-fearful older adults. Interventions targeted to improve lower-extremity physical functions, especially functional balance ability, may help prevent or delay the adverse consequences of FOF.

Cubic MnV2O4 fabricated through a facile sol-gel process as an anode material for lithium-ion batteries: morphology and performance evolution.

Metal vanadates have been popularly advocated as promising anode materials for lithium-ion batteries (LIBs) benefiting from their high theoretical specific capacity and abundant resources. Given that manganese and vanadium are reasonably economical elements and enjoy assorted redox reactions, they have extensive application prospects in energy storage systems. Here, we synthesized cubic MnV2O4 as an anode for LIBs by an efficient sol-gel process. As a result, the MnV2O4 electrode delivers distinguished electrochemical performance, including an appealing reversible specific capacity of nearly 1325 mA h g-1 for 500 cycles at 200 mA g-1, excellent cycling stability with a capacity of 399 mA h g-1 up to 500 cycles at 2000 mA g-1 and a favorable rate capability of 516/410 mA h g-1 at 1000/2000 mA g-1 (when the current density recuperates to 200 mA g-1, the specific capacity still boosts as the number of cycles increases). What's more, electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) under various scan rates and scanning electron microscopy (SEM) are executed to ascertain with a greater depth the electrochemical kinetic characteristics and morphology of the MnV2O4 electrode in different states. These results make known that MnV2O4 is a credible anode material for LIBs, and such a facile and economical synthetic route can be extended to the preparation of other metal vanadate materials.

[Methods for synchronous detection of 14 mycotoxins in Pseudostellariae Radix and investigation on its contamination].

This study aimed to establish a method for synchronous detection of 14 mycotoxins in Pseudostellariae Radix and investigate its contamination with mycotoxins, so as to provide technical guidance for monitoring the quality of Chinese medicinal materials and medication safety. The sample was extracted with 80% acetonitrile in an oscillator for 1 h, purified using the modified QuEChERS purifying agent(0.1 g PSA + 0.3 g C_(18) + 0.3 g MgSO_4), and separated on a Waters HSS T3 chromatographic column(2.1 mm×100 mm, 1.8 µm). The gradient elution was carried out with 0.1% formic acid in water and acetonitrile, followed by the scanning in the multi-reaction monitoring(MRM) mode and the analysis of mycotoxin contamination in 26 Pseudostellariae Radix samples. The recovery rates of the established method were within the range of 82.17%-113.6%, with the RSD values less than 7% and the limits of quantification(LOQ) being 0.019-0.976 µg·kg~(-1). The detection rate of 14 mycotoxins in 26 batches of medicinal materials was 53.85%. The detection rate of sterigmatocystin(ST) was the highest, followed by those of zearalenone(ZEN), aflatoxin G_2(AFG_2), fumonisin B_1(FB_1), HT-2 toxin, and nivalenol(NIV). Their respective detection rates were 38.46%, 26.92%, 23.08%, 11.54%, 11.54%, and 7.69%, with the pollution ranges being 1.48-69.65, 0.11-31.05, 0.11-0.66, 0.28-0.83, 20.86-42.56, and 0.46-1.84 µg·kg~(-1), respectively. The established method for the detection of 14 mycotoxins is accurate, fast and reliable. The research results have very important practical significance for guiding the monitoring and prevention and control of exogenous fungal contamination of Chinese medicinal materials.

Preparation and electrochemical performance of nanowire-shaped Na3Mn2-xFex(P2O7)(PO4) for sodium-ion and lithium-ion batteries.

A series of Fe-doped Na3Mn2-xFex(P2O7)(PO4) (x = 0, 0.2, 0.4) (abbreviated as NMFP-0/NMFP-0.2/NMFP-0.4) compounds have been successfully prepared using the sol-gel method. The Rietveld refinement results indicate that single-phase Na3Mn2-xFex(P2O7)(PO4) with an orthorhombic structure can be obtained. Our results reveal that by controlling the raw materials, the molar ratio of the reactants, the stirring rate of the precursor, the annealing temperature rate, and the reaction time, the proportion of nanowires in the morphology increases as the Fe component rises, and the NMFP-0.4 nanowire-shaped compounds show the best electrochemical activity when used as a cathode material for SIBs. Additionally, its specific capacity is enhanced to ∼126 mA h g-1 in the first cycle when operated at 0.1 C and a working potential window of 1.8-4.3 V (vs. Na/Na+). The material can also be applied in lithium-ion batteries as an anode and achieves ∼600 mA h g-1 specific capacity at a current density of 0.1 C (1 C = 1000 mA g-1) in a working potential window of 0.01-3 V (vs. Li/Li+).

Feasibility study on the preparation of novel negative pressure materials for constructing new matrix of full-thickness skin defect wounds in rats / 中华烧伤杂志

Objective: To explore the feasibility on the preparation of novel negative pressure materials for constructing new matrix of full-thickness skin defect wounds in rats. Methods: The experimental research method was applied. The microstructure of polyurethane foam dressing which was commonly used in negative pressure treatment was observed under scanning electron microscope, and its pore diameter was detected (n=5). Polycaprolactone (PCL) and polybutylene succinate (PBS) were used respectively as raw materials for the preparation of PCL and PBS negative pressure materials by melt spinning technology, with the measured pore diameter of polyurethane foam dressing as the spinning spacing at the spinning rates of 15, 25, and 35 mm/s, respectively. The microstructures of the prepared negative pressure materials were observed under scanning electron microscope, and their fiber diameters were measured. The tensile strength and tensile modulus of the prepared negative pressure materials and polyurethane foam dressing were measured by tensile testing machine and composite testing machine, respectively (n=5), to screen the spinning rate for subsequent preparation of negative pressure materials. Human skin fibroblasts (Fbs) in logarithmic growth phase were co-cultured with PCL negative pressure material and PBS negative pressure material prepared at the selected spinning rate, respectively. After 1, 4, and 7 day (s) of co-culture, the cell activity and adhesion in the materials was detected by living/dead cells detection kit, and the cell proliferation level in the materials was detected by cell counting kit 8 method (n=5). A full-thickness skin defect wound was prepared on the back of 18 5-6 weeks old Sprague-Dawley rats (gender unlimited). Immediately after injury, the injured rats were divided into PCL+polyurethane group, PBS+polyurethane group, and polyurethane alone group according to the random number table (with 6 rats in each group). The wounds were covered with materials containing corresponding component and performed with continuous negative pressure suction at the negative pressure of -16.7 kPa. The wound tissue along with materials directly contacted to the wound (hereinafter referred to as wound specimens) were collected from 3 rats in each group after 7 and 14 days of negative pressure treatment (NPT), respectively. The growth of granulation tissue and the attachment of material to wound surface were observed after hematoxylin-eosin staining, the collagen fiber deposition was observed after Masson staining, and CD34 and interleukin-6 (IL-6) positive cells were detected and counted by immunohistochemical staining. Data were statistically analyzed with one-way analysis of variance, analysis of variance for factorial design, least significant difference-t test, Kruskal-Wallis H test, Mann-Whitney U test, and Bonferroni correction. Results: The microstructure of polyurethane foam dressing was loose and porous, with the pore diameter of (815±182) μm. The spinning spacing for the subsequent negative pressure material was set as 800 μm. The microstructures of PBS negative pressure material and PCL negative pressure material were regular, with vertically interconnected layers and continuous fibers in even thickness, but the fibers of PBS negative pressure material were straighter than those of PCL negative pressure material. There was no obvious difference in the microstructure of negative pressure materials prepared from the same raw material at different spinning rates. The fiber diameters of PCL negative pressure materials prepared at three spinning rates were similar (P>0.05). The fiber diameters of PBS negative pressure materials prepared at spinning rates of 25 mm/s and 35 mm/s were significantly smaller than the fiber diameter of PBS negative pressure material prepared at the spinning rate of 15 mm/s (with t values of 4.99 and 6.40, respectively, P<0.01). Both the tensile strength and tensile modulus of PCL negative pressure materials prepared at three spinning rates were similar (P>0.05). The tensile strength of PBS negative pressure materials prepared at spinning rates of 15 mm/s and 25 mm/s was significantly lower than that of PBS negative pressure materials prepared at the spinning rate of 35 mm/s (with t values of 9.20 and 8.92, respectively, P<0.01), and the tensile modulus was significantly lower than that of PBS negative pressure materials prepared at the spinning rate of 35 mm/s (with t values of 2.58 and 2.47, respectively, P<0.05). Subsequently, PCL negative pressure material was prepared at the spinning rate of 35 mm/s, and PBS negative pressure material was prepared at the spinning rate of 15 mm/s. After 1, 4, and 7 day (s) of co-culture, the number of human skin Fbs that adhered to PCL negative pressure material and PBS negative pressure material increased with time, and there was no significant difference between the two materials. After 1 and 7 day (s) of co-culture, the proliferation levels of human skin Fbs between the two negative pressure materials were similar (P>0.05). After being co-cultured for 4 days, the proliferation level of human skin Fbs in PBS negative pressure material was significantly higher than that in PCL negative pressure material (t=6.37, P<0.01). After 7 days of NPT, the materials were clearly identifiable and a small amount of collagen fibers were also observed in the wound specimens of rats in the three groups; a small amount of granulation tissue was observed in the wound specimens of rats in polyurethane alone group. After 14 days of NPT, a large number of granulation tissue and collagen fibers were observed in the wound specimens of rats in the three groups; the materials and wound tissue in the wound specimens of rats in PCL+polyurethane group could not be clearly distinguished. After 7 and 14 days of NPT, the collagen fibers in the wound specimens of rats in polyurethane alone group were denser than those in the other two groups. After 7 days of NPT, the number of CD34 positive cells in the wound specimens of rats in PBS+polyurethane group was 14.8±3.6 per 400 times visual field, which was significantly less than 27.8±9.1 in polyurethane alone group (t=3.06, P<0.05); the number of IL-6 positive cells was 60 (49, 72), which was significantly more than 44 (38, 50) in polyurethane alone group (Z=2.41, P<0.05). After 14 days of NPT, the number of IL-6 positive cells in the wound specimens of rats in PBS+polyurethane group was 19 (12, 28) per 400 times visual field, which was significantly more than 3 (1, 10) in PCL+polyurethane group and 9 (2, 13) in polyurethane alone group (with Z values of 2.61 and 2.40, respectively, P<0.05). Conclusions: The prepared PCL negative pressure material and PBS negative pressure material have good biocompatibility, and can successfully construct the new matrix of full-thickness skin defect wounds in rats. PCL negative pressure material is better than PBS negative pressure material in general.

Effect of Celastrol Based on IRAK4/ERK/p38 Signaling Pathway on Proliferation and Apoptosis of Multiple Myeloma Cells / 中国实验血液学杂志

OBJECTIVE@#To investigate the effect of celastrol on the proliferation and apoptosis of human multiple myeloma (MM) cell lines, reveal the relationship between IRAK4/ERK/p38 signaling pathway and celastrol regulating the proliferation and apoptosis of H929 and ARP-1 cells, and explore whether celastrol combined with bortezomib has synergistic effect. @*METHODS@#CCK-8 method was used to detect the viability of MM cell lines H929 and ARP-1 treated by different concentrations of celastrol, bortezomib, and their combination, and the synergistic effect was determined by Kim's formula. The apoptosis rate of H929 cells and necrosis rate of ARP-1 were detected by Annexin V/PI method. The expression of key proteins and apoptosis proteins in IRAK4/ERK/p38 signaling pathway were detected by Western blot. @*RESULTS@#Celastrol could significantly inhibit the proliferation of H929 and ARP-1 cells (r=0.9018, r=0.9244) and induce apoptosis in a time-dependent manner. Compared with the control group, celastrol could significantly up-regulate the expression of PARP and cleaved caspase-3 while down-regulate the expression of p-IRAK4, p-ERK, and p-p38 in H929 and ARP-1 cells. Celastrol and bortezomib alone inhibited the proliferation of H929 and ARP-1 cells. Compared with celastrol and bortezomib alone, their combination had lower cell survival rate and higher apoptosis rate (P<0.05). @*CONCLUSION@#Celastrol can inhibit the proliferation and promote the apoptosis of H929 and ARP-1 cells, which may be related to inhibiting the phosphorylation of IRAK4 and blocking the activation of IRAK4/ERK/p38 signaling pathway. Celastrol combined with bortezomib has synergistic effect, which can more effectively inhibit the proliferation and induce apoptosis of H929 and ARP-1 cells.

Therapeutic strategies for chronic wound infection / 中华创伤杂志(英文版)

Chronic wounds have always been a tough fight in clinical practice, which can not only make patients suffer from pain physically and mentally but also impose a heavy burden on the society. More than one factor is relevant to each step of the development of chronic wounds. Along with the in-depth research, we have realized that figuring out the pathophysiological mechanism of chronic wounds is the foundation of treatment, while wound infection is the key point concerned. The cause of infection should be identified and prevented promptly once diagnosed. This paper mainly describes the mechanism, diagnosis and therapeutic strategies of chronic wound infection, and will put an emphasis on the principle of debridement.

Facile synthesis of one-dimensional vanadyl acetate nanobelts toward a novel anode for lithium storage.

Transition metal oxides (TMOs) are prospective anode materials for lithium-ion batteries (LIBs), owing to their high theoretical specific capacity. However, the inherently low conductivity of TMOs restricts their application. The coupling of lithium-ion conducting polymer ligands with TMO structures is favorable for the dynamics of electrochemical processes. Herein, vanadyl acetate (VA) nanobelts, an organic-inorganic hybrid material, are synthesized for the first time as an anode material for LIBs. As a result, the VA nanobelt electrode displays an outstanding electrochemical performance, including a highly stable reversible specific capacity (around 1065 mA h g-1 at 200 mA g-1), superior long-term cyclability (with a capacity of approximately 477 mA h g-1 at 2 A g-1 over 500 cycles) and attractive rate capability (1012 mA h g-1 when the current density recovers to 200 mA g-1). In addition, scanning electron microscopy (SEM), cyclic voltammetry (CV) curves at different scanning rates and electrochemical impedance spectroscopy (EIS) are used to investigate the variation of the specific capacity and the electrochemical kinetic characteristics of the VA electrode during cycling in detail, respectively. Also, the structural variations of the VA electrode in the initial two cycles are also investigated by in situ XRD testing. The periodic evolution of the in situ XRD patterns demonstrates that the VA nanobelt electrode shows excellent reversibility for Li+ ion insertion/extraction. This work offers an enlightening insight into the future research into organo-vanadyl hybrids as advanced anode materials.

In situ hydrothermal synthesis of double-carbon enhanced novel cobalt germanium hydroxide composites as promising anode material for sodium ion batteries.

Germanium (Ge)-based materials are considered to be one of the most promising anode materials for sodium-ion batteries (SIBs). Nevertheless, the practical electrochemical performance is severely hampered by poor cyclability due to volumetric expansion of Ge upon cycling. Herein, double-carbon confined cobalt germanium hydroxide (CGH@C/rGO) composites has been facilely synthesized with the supportion of l-ascorbic acid and graphene oxide (GO) as anode materials for sodium-ion storage. As a result, the CGH@C/rGO anode delivers a high cyclic stability with a reversible capacity of 416 mA h g-1 after 100 cycles at 100 mA g-1 and an excellent rate capability of 206 mA h g-1 at 2000 mA g-1 compared with CGH, CGH@C and CGH/rGO composites. Besides, the reversible capacity of 266 mA h g-1 still remained even after 500 cycles at current density of 1 A g-1. Such outstanding electrochemical performance could be accredited to a strong interaction between CGH, carbon, and graphene, which increases the electronic conductivity, relieves the volume expansion aroused by sodiation/desodiation, shortens the pathway of electron/ion transportation that further improving the reaction kinetics and endowing the material with remarkable cycling capability. Obviously, this in situ hydrothermal synthesis of double carbon coating strategy can be extended to designing other candidates of anode materials for SIBs.

Epigenetic Histone Modifications in the Pathogenesis of Diabetic Kidney Disease.

Diabetic kidney disease (DKD), as the main complication of diabetes mellitus, is the primary cause of the end-stage renal disease (ESRD) and the most common chronic kidney disease. Overall, 30-40% of patients with type 1 and type 2 diabetes eventually develop DKD. Although some diabetes patients have intensified glycemic control, they still develop diabetic kidney disease. Current treatment methods can alleviate but do not markedly halt disease development, resulting in renal failure and severe complications, even contributing to elevated morbidity and mortality rates. DKD is a disease with interactions of genes and the environment. Emerging evidence indicates that DKD-associated key genes are also regulated by the epigenetic mechanism. Recently, increasing researches involving cells and experimental animals demonstrated that histone post-translational modifications can mediate gene expression, which correlated with diabetic kidney disease. Novel therapeutic strategies for epigenetic events could be beneficial for the early detection and treatment of DKD to prevent it from developing into end-stage renal disease (ESRD). In this review, we discuss prior findings in the field of histone modifications in DKD, especially histone acetylation and histone methylation. We then focus on recent developments in histone acetylation and methylation involved in the pathogenesis of DKD.

Analysis of Serum Metabonomics in Patients with Multiple Myeloma Based on Liquid Chromatography-Mass Spectrometry / 中国实验血液学杂志

OBJECTIVE@#To observe the changes of serum metabolites in patients with multiple myeloma (MM) by metabonomics, and explore the potential biomarkers for diagnosis, prognosis, and progression of MM.@*METHODS@#Serum samples were collected from 26 patients with MM and 50 healthy controls. The data detected by liquid chromatography-mass spectrometry (LC-MS) was input into SIMCA-14.0 software for multivariate statistical analysis. Principal component analysis (PCA), partial least squares discriminant analysis (PLS-DA), and orthogonal partial least squares discriminant analysis (OPLS-DA) were used to analyze the changes of metabolites.@*RESULTS@#The metabolic change of uric acid and trans-vaccenic acid in serum samples of MM patients was 9.39 times and 2.77 times of these in healthy people, respectively, which were significantly higher than those of healthy people, and the difference was statistically significant(P<0.01).@*CONCLUSION@#Uric acid and trans-vaccenic acid are expected to be important metabolic indicators for the diagnosis, prognosis, and efficacy evaluation of MM, thus providing some clues for the pathogenesis of MM.

Effect of Resin Coating on Surface Roughness and Microhardness of High Viscous Glass Ionomer Cements

ABSTRACT@#High viscous glass ionomer cement (HVGIC) was recently developed for atraumatic restorative treatment (ART). However, its moisture sensitivity remains a limitation thus protective coating application is recommended. This study investigated the effect of resin coating on the surface roughness and microhardness of two HVGICs (Riva Self Cure HVGIC [RV] and Equia® Forte Fil [EQ]) conditioned in food-simulating liquids (FSLs). Fifty standard disc-shaped samples were fabricated using customised stainless-steel mould (10 × 2 mm). Coating was applied on top surface of all samples and subsequently divided into five groups: air (control), distilled water, 0.02 N citric acid, heptane and 50% ethanol-water solution. The samples were conditioned in FSLs at 37°C for seven days. Subsequently, the surface roughness and microhardness of samples were measured using optical profilometry and microhardness tester, respectively. SEM analysis was done for qualitative observation of surface morphological changes. Data were analysed using one-way ANOVA, two-way ANOVA and posthoc Tukey’s test (α = 0.05). Interestingly, the results revealed that surface roughness was significantly influenced by FSLs immersion, presence of coating and the materials itself (p < 0.001). The lowest surface roughness was found on control coated samples: RV (50.98±4.25) nm and EQ (62.77±3.92) nm, while the highest values seen on uncoated surfaces in citric acid: RV (505.26±31.10) nm and EQ (350.33±15.36) nm. RV samples had the lowest microhardness of 54.97±2.48 Vickers hardness number (VHN) post-immersion in citric acid. In conclusion, with the exception of RV conditioned in heptane and ethanol, the uncoated HVGICs generally had higher surface roughness than the coated HVGICs. HVGICs conditioned in citric acid showed the most significant increase in surface roughness and reduction in microhardness.

Electrochemically Induced Structural and Morphological Evolutions in Nickel Vanadium Oxide Hydrate Nanobelts Enabling Fast Transport Kinetics for High-Performance Zinc Storage.

Suitable intercalation cathodes and fundamental insights into the Zn-ion storage mechanism are the crucial factors for the booming development of aqueous zinc-ion batteries. Herein, a novel nickel vanadium oxide hydrate (Ni0.25V2O5·0.88H2O) is synthesized and investigated as a high-performance electrode material, which delivers a reversible capacity of 418 mA h g-1 with 155 mA h g-1 retained at 20 A g-1 and a high capacity of 293 mA h g-1 in long-term cycling at 10 A g-1 with 77% retention after 10,000 cycles. More importantly, multistep phase transition and chemical-state change during intercalation/deintercalation of hydrated Zn2+ are illustrated in detail via in situ/ex situ analytical techniques to unveil the Zn2+ storage mechanism of the hydrated and layered vanadium oxide bronze. Furthermore, morphological development from nanobelts to hierarchical structures during rapid ion insertion and extraction is demonstrated and a self-hierarchical process is correspondingly proposed. The unique evolutions of structure and morphology, together with consequent fast Zn2+ transport kinetics, are of significance to the outstanding zinc storage capacity, which would enlighten the mechanism exploration of the aqueous rechargeable batteries and push development of vanadium-based cathode materials.