Critical velocity, anaerobic distance capacity, maximal instantaneous velocity and aerobic inertia in sprint and endurance young swimmers.

Critical velocity (CV), anaerobic distance capacity (ADC), maximal instantaneous velocity (V (max)), and aerobic inertia (tau) were calculated from two (CV(2par) and ADC(2par)), three (CV(3par), ADC(3par), and V (max 3par)), and four-parameter model data (CV(4par), ADC(4par), V (max 4par), and tau), which were obtained from six different times and distances (50, 100, 200, 400, 800, and 1,500 m) swum in front crawl stroke under maximal intensity. Fourteen swimmers (14-15-year-old; sprint and endurance groups, each group n = 7) volunteered in this study. CV values were not influenced by the groups. The model effects showed that CV(2par) was higher than CV(3par) and CV(4par) regardless of the group used. In addition, CV(3par) and CV(4par) were similar. ADC seems to be better estimated using both three- and four-parameter models. V (max) was higher in the sprint group regardless of the model used. The models effects showed that the V (max 4par) was higher than the V (max 3par) regardless of the group. Sprint and endurance groups showed similar tau values. The analysis of the models (F test, coefficient of determination R (2), and adjusted coefficient of determination R (adjusted) (2) ) showed that the three-parameter model was more appropriate among the applied models. Although the four-parameter model showed better correlation for the endurance group, the inclusion of tau (fourth parameter) did not significantly improve the quality of adjustment. However, it is important to emphasize the availability of another parameter for the study of bioenergetics in swimming and other sports.

Formation of PCDD and PCDF in the thermal treatment of footwear leather wastes.

The leather waste generated by the footwear industry is considered dangerous due to the presence of trivalent chromium, derived from the salt utilized to tan hides. In Brazil, the majority of this waste is disposed on landfills and only about 3% are recycled. The thermal treatment is an alternative method for purification of such residues. By using this technique it is possible to generate energy and recover the chromium present in the ash for the production of basic chromium sulfate (tanning industry), high carbon ferrochromium or carbon-free ferrochromium (steel industry). In the last 10 years, the gasification and combustion of footwear leather waste have been intensively studied at the Federal University of Rio Grande do Sul. The research experiment for characterization of the emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) were carried out in a semi-pilot unit (350 kW(th)). From new investments the thermal capacity of the unit will increase to 600 kW(th). The unit will produce power from the heat generated in the combustion. The experimental results indicated that during the thermal treatment of footwear leather wastes, the formation mechanism of PCDD/F is the de novo synthesis. Most of PCDD/F were found in the particulate phase (>95%). A kinetic model was used for discussion of the achieved experimental results. The model is based in the carbon gasification, PCDD/F formation, desorption and degradation. From the conclusions obtained in this work will be possible minimize the PCDD/F formation in process of combustion of footwear leather wastes.