Titanium Oxycarbide as Platinum-Free Electrocatalyst for Ethanol Oxidation.

The compound material titanium oxycarbide (TiOC) is found to be an effective electrocatalyst for the electrochemical oxidation of ethanol to CO2. The complete course of this reaction is one of the main challenges in direct ethanol fuel cells (DEFCs). While TiOC has previously been investigated as catalyst support material only, in this study we show that TiOC alone is able to oxidize ethanol to acetaldehyde without the need of expensive noble metal catalysts like Pt. It is suggested that this behavior is attributed to the presence of both undercoordinated sites, which allow ethanol to adsorb, and oxygenated sites, which facilitate the activation of water. This is a milestone in DEFC research and development and opens up innovative possibilities for the design of catalyst materials for intermediate temperature fuel cells.

True Nature of the Transition-Metal Carbide/Liquid Interface Determines Its Reactivity.

Compound materials, such as transition-metal (TM) carbides, are anticipated to be effective electrocatalysts for the carbon dioxide reduction reaction (CO2RR) to useful chemicals. This expectation is nurtured by density functional theory (DFT) predictions of a break of key adsorption energy scaling relations that limit CO2RR at parent TMs. Here, we evaluate these prospects for hexagonal Mo2C in aqueous electrolytes in a multimethod experiment and theory approach. We find that surface oxide formation completely suppresses the CO2 activation. The oxides are stable down to potentials as low as -1.9 V versus the standard hydrogen electrode, and solely the hydrogen evolution reaction (HER) is found to be active. This generally points to the absolute imperative of recognizing the true interface establishing under operando conditions in computational screening of catalyst materials. When protected from ambient air and used in nonaqueous electrolyte, Mo2C indeed shows CO2RR activity.

An ultra-flexible modular high vacuum setup for thin film deposition.

A modular high vacuum chamber dedicated to thin film deposition is presented. We detail the vacuum and gas infrastructure required to operate two highly flexible chambers simultaneously, with a focus on evaporation techniques (thermal and electron beam) and magnetron sputtering, including baking equipment to remove residual water from the chamber. The use of O-ring-sealed flat flanges allows a tool-free assembly process, in turn enabling rapid changes of the whole setup. This leads to a high flexibility regarding the deposition techniques as the chamber can be adapted to different sources within minutes, permitting the formation of multilayer systems by consecutive depositions onto the same substrate. The central piece of the chamber is a flat flange ground glass tube or cross. The glass recipient permits optical monitoring of the deposition process. Further equipment, such as for the introduction of gases, additional pressure gauges, or evaporators, can be incorporated via specifically designed stainless steel/aluminum interconnectors and blank flanges. In the end, we demonstrate the preparation of an unsupported thin film system consisting of electron-beam-evaporated platinum nanoparticles embedded in magnetron-sputtered zirconia (ZrO2), deposited onto NaCl single crystals, which subsequently can be removed by dissolution. These films are further analyzed by means of transmission electron microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.