Electrically driven proton transfer promotes Brønsted acid catalysis by orders of magnitude.

Electric fields play a key role in enzymatic catalysis and can enhance reaction rates by 100,000-fold, but the same rate enhancements have yet to be achieved in thermochemical heterogeneous catalysis. In this work, we probe the influence of catalyst potential and interfacial electric fields on heterogeneous Brønsted acid catalysis. We observed that variations in applied potential of ~380 mV led to a 100,000-fold rate enhancement for 1-methylcyclopentanol dehydration, which was catalyzed by carbon-supported phosphotungstic acid. Mechanistic studies support a model in which the interfacial electrostatic potential drop drives quasi-equilibrated proton transfer to the adsorbed substrate prior to rate-limiting C-O bond cleavage. Large increases in rate with potential were also observed for the same reaction catalyzed by Ti/TiOyHx and for the Friedel Crafts acylation of anisole with acetic anhydride by carbon-supported phosphotungstic acid.

A molecular-level mechanistic framework for interfacial proton-coupled electron transfer kinetics.

Electrochemical proton-coupled electron transfer (PCET) reactions can proceed via an outer-sphere electron transfer to solution (OS-PCET) or through an inner-sphere mechanism by interfacial polarization of surface-bound active sites (I-PCET). Although OS-PCET has been extensively studied with molecular insight, the inherent heterogeneity of surfaces impedes molecular-level understanding of I-PCET. Herein we employ graphite-conjugated carboxylic acids (GC-COOH) as molecularly well-defined hosts of I-PCET to isolate the intrinsic kinetics of I-PCET. We measure I-PCET rates across the entire pH range, uncovering a V-shaped pH-dependence that lacks the pH-independent regions characteristic of OS-PCET. Accordingly, we develop a mechanistic model for I-PCET that invokes concerted PCET involving hydronium/water or water/hydroxide donor/acceptor pairs, capturing the entire dataset with only four adjustable parameters. We find that I-PCET is fourfold faster with hydronium/water than water/hydroxide, while both reactions display similarly high charge transfer coefficients, indicating late proton transfer transition states. These studies highlight the key mechanistic distinctions between I-PCET and OS-PCET, providing a framework for understanding and modelling more complex multistep I-PCET reactions critical to energy conversion and catalysis.

Metal nanoparticles supported on a nonconductive oxide undergo pH-dependent spontaneous polarization.

Electrochemical polarization, which often plays a critical role in driving chemical reactions at solid-liquid interfaces, can arise spontaneously through the exchange of ions and/or electrons across the interface. However, the extent to which such spontaneous polarization prevails at nonconductive interfaces remains unclear because such materials preclude measuring and controlling the degree of interfacial polarization via standard (i.e., wired) potentiometric methods. Herein, we circumvent the limitations of wired potentiometry by applying infrared and ambient pressure X-ray photoelectron spectroscopies (AP-XPS) to probe the electrochemical potential of nonconductive interfaces as a function of solution composition. As a model class of macroscopically nonconductive interfaces, we specifically probe the degree of spontaneous polarization of ZrO2-supported Pt and Au nanoparticles immersed in aqueous solutions of varying pH. Shifts in the Pt-adsorbed CO vibrational band position evince electrochemical polarization of the Pt/ZrO2-water interface with changing pH, and AP-XPS reveals quasi-Nernstian shifts of the electrochemical potential of Pt and Au with pH in the presence of H2. These results indicate that spontaneous proton transfer via equilibrated H+/H2 interconversion spontaneously polarizes metal nanoparticles even when supported on a nonconductive host. Consequently, these findings indicate that solution composition (i.e., pH) can be an effective handle for tuning interfacial electrical polarization and potential at nonconductive interfaces.

The double protonation of dihapto-coordinated benzene complexes enables dearomatization using aromatic nucleophiles.

Friedel-Crafts Arylation (the Scholl reaction) is the coupling of two aromatic rings with the aid of a strong Lewis or Brønsted acid. This historically significant C-C bond forming reaction normally leads to aromatic products, often as oligomeric mixtures, dictated by the large stabilization gained upon their rearomatization. The coordination of benzene by a tungsten complex disrupts the natural course of this reaction sequence, allowing for Friedel-Crafts Arylation without rearomatization or oligomerization. Subsequent addition of a nucleophile to the coupled intermediate leads to functionalized cyclohexenes. In this work, we show that by coordinating benzene to tungsten through two carbons (dihapto-coordinate), a rarely observed double protonation of the bound benzene is enabled, allowing its subsequent coupling to a second arene without the need of a precious metal or Lewis acid catalyst.

Phenyl Sulfones: A Route to a Diverse Family of Trisubstituted Cyclohexenes from Three Independent Nucleophilic Additions.

A novel process is described for the synthesis of di- and trisubstituted cyclohexenes from an arene. These compounds are prepared from three independent nucleophilic addition reactions to a phenyl sulfone (PhSO2R; R = Me, Ph, and NC4H8) dihapto-coordinated to the tungsten complex {WTp(NO)(PMe3)}(Tp = trispyrazolylborate). Such a coordination renders the dearomatized aryl ring susceptible to protonation at a carbon ortho to the sulfone group. The resulting arenium species readily reacts with the first nucleophile to form a dihapto-coordinated sulfonylated diene complex. This complex can again be protonated, and the subsequent nucleophilic addition forms a trisubstituted cyclohexene species bearing a sulfonyl group at an allylic position. Loss of the sulfinate anion forms a π-allyl species, to which a third nucleophile can be added. The trisubstituted cyclohexene can then be oxidatively decomplexed, either before or after substitution of the sulfonyl group. Nucleophiles employed include masked enolates, cyanide, amines, amides, and hydride, with all three additions occurring to the same face of the ring, anti to the metal. Of the 12 novel functionalized cyclohexenes prepared as examples of this methodology, nine compounds meet five independent criteria for evaluating drug likeliness. Structural assignments are supported with nine crystal structures, density functional theory studies, and full 2D NMR analysis.

Polymer-induced polymorphism in a Zn-based metal organic framework.

Several MOF polymorphs exhibit enhanced properties compared to their previously known structures, motivating the development of polymorphic control methods. Here, we study polymorphism in the ZIF-8/ZIF-L system as a function of metal : ligand ratio during synthesis and show a significant shift in the phase transition point towards ZIF-8 with addition of dilute polyethylene oxide during synthesis. Computational results suggest a simple pathway for controlling MOF polymorphism where the choice of polymer can be guided via first-principles simulations.

Hydroamination of Dihapto-Coordinated Benzene and Diene Complexes of Tungsten: Fundamental Studies and the Synthesis of γ-Lycorane.

Reactions are described for complexes of the form WTp(NO)(PMe3)(η2-arene) and various amines, where the arene is benzene or benzene with an electron-withdrawing substituent (CF3, SO2Ph, SO2Me). The arene complex is first protonated to form an η2-arenium species, which then selectively adds the amine. The resulting η2-5-amino-1,3-cyclohexadiene complexes can then be subjected to the same sequence with a second nucleophile to form 3-aminocyclohexene complexes, where up to three stereocenters originate from the arene carbons. Alternatively, 1,3-cyclohexadiene complexes containing an ester group at the 5 position (also prepared from an arene) can be treated with acid followed by an amine to form trisubstituted 3-aminocyclohexenes. When the amine is primary, ring closure can occur to form a cis-fused bicyclic γ-lactam. Highly functionalized cyclohexenes can be liberated from the tungsten through oxidative decomplexation. The potential utility of this methodology is demonstrated in the synthesis of the alkaloid γ-lycorane. An enantioenriched synthesis of a lactam precursor to γ-lycorane is also described. This compound is prepared from an enantioenriched version of the tungsten benzene complex. Regio- and stereochemical assignments for the reported compounds are supported by detailed 2D-NMR analysis and 13 molecular structure determinations (SC-XRD).

Experiments and Direct Dynamics Simulations That Probe η2-Arene/Aryl Hydride Equilibria of Tungsten Benzene Complexes.

Key steps in the functionalization of an unactivated arene often involve its dihaptocoordination by a transition metal followed by insertion into the C-H bond. However, rarely are the η2-arene and aryl hydride species in measurable equilibrium. In this study, the benzene/phenyl hydride equilibrium is explored for the {WTp(NO)(PBu3)} (Bu = n-butyl; Tp = trispyrazoylborate) system as a function of temperature, solvent, ancillary ligand, and arene substituent. Both face-flip and ring-walk isomerizations are identified through spin-saturation exchange measurements, which both appear to operate through scission of a C-H bond. The effect of either an electron-donating or electron-withdrawing substituent is to increase the stability of both arene and aryl hydride isomers. Crystal structures, electrochemical measurements, and extensive NMR data further support these findings. Static density functional theory calculations of the benzene-to-phenyl hydride landscape suggest a single linear sequence for this transformation involving a sigma complex and oxidative cleavage transition state. Static DFT calculations also identified an η2-coordinated benzene complex in which the arene is held more loosely than in the ground state, primarily through dispersion forces. Although a single reaction pathway was identified by static calculations, quasiclassical direct dynamics simulations identified a network of several reaction pathways connecting the η2-benzene and phenyl hydride isomers, due to the relatively flat energy landscape.

Preparation of cyclohexene isotopologues and stereoisotopomers from benzene.

The hydrogen isotopes deuterium (D) and tritium (T) have become essential tools in chemistry, biology and medicine1. Beyond their widespread use in spectroscopy, mass spectrometry and mechanistic and pharmacokinetic studies, there has been considerable interest in incorporating deuterium into drug molecules1. Deutetrabenazine, a deuterated drug that is promising for the treatment of Huntington's disease2, was recently approved by the United States' Food and Drug Administration. The deuterium kinetic isotope effect, which compares the rate of a chemical reaction for a compound with that for its deuterated counterpart, can be substantial1,3,4. The strategic replacement of hydrogen with deuterium can affect both the rate of metabolism and the distribution of metabolites for a compound5, improving the efficacy and safety of a drug. The pharmacokinetics of a deuterated compound depends on the location(s) of deuterium. Although methods are available for deuterium incorporation at both early and late stages of the synthesis of a drug6,7, these processes are often unselective and the stereoisotopic purity can be difficult to measure7,8. Here we describe the preparation of stereoselectively deuterated building blocks for pharmaceutical research. As a proof of concept, we demonstrate a four-step conversion of benzene to cyclohexene with varying degrees of deuterium incorporation, via binding to a tungsten complex. Using different combinations of deuterated and proteated acid and hydride reagents, the deuterated positions on the cyclohexene ring can be controlled precisely. In total, 52 unique stereoisotopomers of cyclohexene are available, in the form of ten different isotopologues. This concept can be extended to prepare discrete stereoisotopomers of functionalized cyclohexenes. Such systematic methods for the preparation of pharmacologically active compounds as discrete stereoisotopomers could improve the pharmacological and toxicological properties of drugs and provide mechanistic information related to their distribution and metabolism in the body.

Spatial Recognition Within Terpenes: Redox and H-bond Promoted Linkage Isomerizations and the Selective Binding of Complex Alkenes.

A method for the resolution of η 2-alkene-complex isomers of the type MoTp(NO)(DMAP)(η 2-alkene) and WTp(NO)(PMe3)(η 2-alkene) (where Tp = hydridotris(pyrazolyl)-borate and DMAP = 4-(dimethylamino)pyridine) has been explored. Alkene and polyene compounds form as a mixture of kinetically trapped isomers. For both types of complexes, it was found that addition of either a fluorinated alcohol or one-electron oxidant reduces the number of isomers in solution. Accelerated ligand exchange was also observed, although these reactions were accompanied by significant decomposition.

η 2 Coordination of Electron-Deficient Arenes with Group 6 Dearomatization Agents.

The exceptionally π-basic metal fragments {MoTp-(NO)(DMAP)} and {WTp(NO)(PMe3)} (Tp = tris(pyrazolyl)borate; DMAP = 4-(N,N-dimethylamino)pyridine) form thermally stable η 2-coordinated complexes with a variety of electron-deficient arenes. The tolerance of substituted arenes with fluorine-containing electron withdrawing groups (EWG; -F, -CF3, -SF5) is examined for both the molybdenum and tungsten systems. When the EWG contains a π bond (nitriles, aldehydes, ketones, ester), η 2 coordination occurs predominantly on the nonaromatic functional group. However, complexation of the tungsten complex with trimethyl orthobenzoate (PhC(OMe)3) followed by hydrolysis allows access to an η 2-coordinated arene with an ester substituent. In general, the tungsten system tolerates sulfur-based withdrawing groups well (e.g., PhSO2Ph, MeSO2Ph), and the integration of multiple electron-withdrawing groups on a benzene ring further enhances the π-back-bonding interaction between the metal and aromatic ligand. While the molybdenum system did not form stable η 2-arene complexes with the sulfones or ortho esters, it was capable of forming rare examples of stable η 2-coordinated arene complexes with a range of fluorinated benzenes (e.g., fluorobenzene, difluorobenzenes). In contrast to what has been observed for the tungsten system, these complexes formed without interference of C-H or C-F insertion.