Determination of the nonlinear thermo-optic coefficient of silicon nitride and oxide using an effective index method.

There is little literature characterizing the temperature-dependent thermo-optic coefficient (TOC) for low pressure chemical vapor deposition (LPCVD) silicon nitride or plasma enhanced chemical vapor deposition (PECVD) silicon dioxide at temperatures above 300 K. In this study, we characterize these material TOC's from approximately 300-460 K, yielding values of (2.51 ± 0.08) · 10-5K-1 for silicon nitride and (5.67 ± 0.53) · 10-6K-1 for silicon oxide at room temperature (300 K). We use a simplified experimental setup and apply an analytical technique to account for thermal expansion during the extraction process. We also show that the waveguide geometry and method used to determine the resonant wavelength have a substantial impact on the precision of our results, a fact which can be used to improve the precision of numerous ring resonator index sensing experiments.

Efficient actuation design for optomechanical sensors.

For any nanomechanical device intended for sensing applications, actuation is an important consideration. Many different actuation mechanisms have been used, including self-oscillation, piezoelectric shakers, capacitive excitation, and optically pumping via the optical gradient force. Despite the relatively frequent use of optical pumping, the limits of optical actuation with a pump laser have not been fully explored. We provide a practical framework for designing optical cavities and optomechanical systems to maximize the efficiency of the optical pumping technique. The effects of coherent backscattering on detection and actuation are included. We verify our results experimentally and show good agreement between the model and experiment. Our model for efficient actuation will be a useful resource for the future design of optomechanical cavities for sensor and other high-amplitude applications.

Porous Nanophotonic Optomechanical Beams for Enhanced Mass Adsorption.

We have developed a porous silicon nanocantilever for a nano-optomechanical system (NOMS) with a universal sensing surface for enhanced sensitivity. Using electron beam lithography, we selectively applied a V2O5/HF stain etch to the mechanical elements while protecting the silicon-on-insulator photonic ring resonators. This simple, rapid, and electrodeless approach generates tunable device porosity simultaneously with the mechanical release step. By controlling the porous etchant concentration and etch time, the porous etch depth, resonant frequency, and the adsorption surface area could be precisely manipulated. Using this control, cantilever sensors ranging from nonporous to fully porous were fabricated and tested as gas-phase mass sensors of volatile organic compounds coming from a gas chromatography stream. The fully porous cantilever produced a dramatic 10-fold increase in sensing signal and a 6-fold improvement in limit of detection (LOD) compared to an otherwise identical nonporous cantilever. This signal improvement could be separated into mass responsivity increase and adsorption increase components. Allan deviation measurements indicate that a further 4-fold improvement in LOD could be expected upon speeding up characteristic peak response time from 1 s to 50 ms. These results show promise for performance enhancement in nanomechanical sensors for applications in gas sensing, gas chromatography, and mass spectrometry.

Improving mechanical sensor performance through larger damping.

Mechanical resonances are used in a wide variety of devices, from smartphone accelerometers to computer clocks and from wireless filters to atomic force microscopes. Frequency stability, a critical performance metric, is generally assumed to be tantamount to resonance quality factor (the inverse of the linewidth and of the damping). We show that the frequency stability of resonant nanomechanical sensors can be improved by lowering the quality factor. At high bandwidths, quality-factor reduction is completely mitigated by increases in signal-to-noise ratio. At low bandwidths, notably, increased damping leads to better stability and sensor resolution, with improvement proportional to damping. We confirm the findings by demonstrating temperature resolution of 60 microkelvin at 300-hertz bandwidth. These results open the door to high-performance ultrasensitive resonators in gaseous or liquid environments, single-cell nanocalorimetry, nanoscale gas chromatography, atmospheric-pressure nanoscale mass spectrometry, and new approaches in crystal oscillator stability.