CT parameters in pure orbital wall fractures and their relevance in the choice of treatment and patient outcome: a systematic review.

Computed tomography (CT) is commonly used for the diagnosis, treatment planning, and prognosis of pure orbital fractures of the orbital floor and medial wall. The aim of this study was to systematically review the current literature in order to establish an overview of CT parameters relevant to the choice of treatment and (long-term) clinical outcome for patients treated operatively and conservatively. The PRISMA guidelines were followed. Databases were searched using the terms 'orbital fracture' and 'computed tomography'. Studies evaluating the relationship between CT parameters and the treatment decision or clinical outcome (enophthalmos, diplopia, and/or limitation of ocular movement) were included. The search yielded 4448 results of which 31 were included (except for three, all were retrospective). The systematic use of CT imaging in orbital fractures of the floor and the medial wall can be of great value in the treatment decision and prediction of (long-term) clinical outcomes for both conservatively and surgically treated patients. The following parameters were found to be the most relevant: fracture size, fracture location, orbital volume, soft tissue involvement, and craniocaudal dimension. Although some show great individual potential, it is likely that incorporating all parameters into an algorithm will provide the best predictive power and thus would be the most practically applicable tool.

Investigation of fatigue crack initiation facets in Ti-6Al-4V using focused ion beam milling and electron backscatter diffraction.

In the very high cycle fatigue regime, internal crack initiation can occur in Ti-6Al-4V because of the formation of facets, which are α grains that have fractured in a transcrystalline and planar manner. Because this crack initiation phase occupies most of the fatigue life, it is essential to understand which mechanisms lead to facet formation. Fatigue tests have been performed on drawn and heat-treated Ti-6Al-4V wires, and the facets at internal crack initiation sites have been analysed in detail in terms of their appearance, their spatial orientation and their crystallographic orientation. The facets were not smooth, but showed surface markings at the nanoscale. In nearly all cases, these markings followed a linear pattern. One anomalous facet, in a sample with the largest grain size, contained a fan-shaped pattern. The facets were at relatively steep angles, mostly between 50° and 70°. Cross-sections of the fracture surfaces have been made by focused ion beam milling and were used to measure the crystallographic orientation of facets by electron backscatter diffraction. Most facet planes coincided with a prismatic lattice plane, and the linear markings were parallel to the prismatic slip direction, which is a strong indication that prismatic slip and slip band formation led to crack initiation. However, the anomalous facet had a near-basal orientation, which points to a possible cleavage mechanism. The cross-sections also exposed secondary cracks, which had formed on prismatic lattice planes, and in some cases early stage facet formation and short crack growth phenomena. The latter observations show that facets can extend through more than one grain, and that there is crack coalescence between facets. The fact that drawn wires have a specific crystallographic texture has led to a different facet formation behaviour compared to what has been suggested in the literature.

Understanding external cervical resorption patterns in endodontically treated teeth.

AIM: To understand the patterns of external cervical resorption (ECR) in endodontically treated teeth. To compare characteristics and mechanisms of ECR in root filled teeth with those established in teeth with vital pulps. METHODOLOGY: Seven cases of endodontically treated permanent teeth displaying ECR were investigated. ECR diagnosis was based on clinical findings and radiographic examination with cone-beam computed tomography. The extracted teeth were further analysed by a nano-focus computed tomographic (nano-CT) system, hard-tissue histology and scanning electron microscopy (SEM). To make a comparison with teeth with vital pulps, representative cases with ECR were also included. RESULTS: All endodontically treated teeth had a similar ECR pattern. This pattern reflected many similarities to that seen in teeth with vital pulps; that is, three stages were observed namely initiation, resorption and repair. In particular, during the initiation stage (1st stage), the resorption started below the gingival epithelial attachment, at the level of cementum. In the resorption stage (2nd stage), ECR spreads towards the treated pulp space and in a coronal-apical direction, creating multiple resorption channels. The pulp and the pericanalar resorption resistant sheet (PRRS) had been removed during root canal treatment and thus offered no retarding or defence mechanism towards ECR. In the reparative stage (3rd stage), reparative hard-tissue formation occurred at a localized scale. CONCLUSIONS: Similar ECR patterns were observed in all examined teeth. These patterns consisted of an initiation, a resorption and a reparative stage. Some differences were noticed between endodontically treated and teeth with vital pulps, mainly in the resorption and reparative stages. The resorption stage in root filled teeth was more intense than the repair stage, as many clastic cells and abundant granulation tissue were observed in all samples. This is possibly due to the absence of the pulp and protective PRRS layer and/or to the altered chemical composition of the root dentine after root canal treatment. Furthermore, at the repair stage, formation of reparative bonelike tissue took place to a lesser extent in root filled teeth.

A spectroscopic study of the chromatic properties of GafChromicEBT3 films.

PURPOSE: This work provides an interpretation of the chromatic properties of GafChromicEBT3 films based on the chemical nature of the polydiacetylene (PDA) molecules formed upon interaction with ionizing radiation. The EBT3 films become optically less transparent with increasing radiation dose as a result of the radiation-induced polymerization of diacetylene monomers. In contrast to empirical quantification of the chromatic properties, less attention has been given to the underlying molecular mechanism that induces the strong decrease in transparency. METHODS: Unlaminated GafChromicEBT3 films were irradiated with a 6 MV photon beam to dose levels up to 20 Gy. The optical absorption properties of the films were investigated using visible (vis) spectroscopy. The presence of PDA molecules in the active layer of the EBT3 films was investigated using Raman spectroscopy, which probes the vibrational modes of the molecules in the layer. The vibrational modes assigned to PDA's were used in a theoretical vis-absorption model to fit our experimental vis-absorption spectra. From the fit parameters, one can assess the relative contribution of different PDA conformations and the length distribution of PDA's in the film. RESULTS: Vis-spectroscopy shows that the optical density increases with dose in the full region of the visible spectrum. The Raman spectrum is dominated by two vibrational modes, most notably by the ν(C≡C) and the ν(C=C) stretching modes of the PDA backbone. By fitting the vis-absorption model to experimental spectra, it is found that the active layer contains two distinct PDA conformations with different absorption properties and reaction kinetics. Furthermore, the mean PDA conjugation length is found to be 2-3 orders of magnitude smaller than the crystals PDA's are embedded in. CONCLUSIONS: Vis- and Raman spectroscopy provided more insight into the molecular nature of the radiochromic properties of EBT3 films through the identification of the excited states of PDA and the presence of two PDA conformations. The improved knowledge on the molecular composition of EBT3's active layer provides a framework for future fundamental modeling of the dose-response.

A novel multimodular methodology to investigate external cervical tooth resorption.

AIM: To introduce a multimodular combination of techniques as a novel minimal invasive approach to investigate efficiently and accurately external cervical resorption (ECR). METHODOLOGY: One case of a central incisor with extensive external cervical resorption was selected to demonstrate the potential of a comparative novel study methodology. ECR diagnosis was based on clinical inspection, digital radiography and cone-beam computed tomography (CBCT). After extraction, the tooth was investigated using microfocus computed tomography (micro-CT), nano-CT and hard tissue histology. These techniques were compared for their accuracy and applicability to highlight their advantages and disadvantages. RESULTS: Nano-CT was more effective than micro-CT and CBCT for detailed ex vivo exploration of ECR. The reparative tissue, pericanalar resorption resistant sheet (PRRS), pulp tissue reactions, resorption channels and their interconnection with the periodontal ligament space were accurately visualized by detailed processing and analysis of the nano-CT data set with Dataviewer and CTAn software. Nano-CT analysis provided better insight in the true extent of the resorption, based on quantitative measurements and 3D visualization of the tooth structure. Nano-CT imaging results were similar to hard tissue histology at the mineralized tissue level. To clarify the dynamic phenomenon of reparative tissue formation and substitution of the resorbed tissues, nano-CT needed to be associated with hard tissue histology. CONCLUSION: Nano-CT is a fast and minimal invasive technique for the ex vivo analysis and understanding of ECR and is complementary with hard tissue histology. A combined approach of clinical and CBCT examination, with nano-CT and histological mapping measurements, can provide an ideal platform for future ECR imaging and exploration studies.

Timing of risk reducing mastectomy in breast cancer patients carrying a BRCA1/2 mutation: retrospective data from the Dutch HEBON study.

It is expected that rapid genetic counseling and testing (RGCT) will lead to increasing numbers of breast cancer (BC) patients knowing their BRCA1/2 carrier status before primary surgery. Considering the potential impact of knowing one's status on uptake and timing of risk-reducing contralateral mastectomy (RRCM), we aimed to evaluate trends over time in RRCM, and differences between carriers identified either before (predictively) or after (diagnostically) diagnosis. We collected data from female BRCA1/2 mutation carriers diagnosed with BC between 1995 and 2009 from four Dutch university hospitals. We compared the timing of genetic testing and RRCM in relation to diagnosis in 1995-2000 versus 2001-2009 for all patients, and predictively and diagnostically tested patients separately. Of 287 patients, 219 (76%) had a diagnostic BRCA1/2 test. In this cohort, the median time from diagnosis to DNA testing decreased from 28 months for those diagnosed between 1995 and 2000 to 14 months for those diagnosed between 2001 and 2009 (p < 0.001). Similarly, over time women in this cohort underwent RRCM sooner after diagnosis (median of 77 vs. 27 months, p = 0.05). Predictively tested women who subsequently developed BC underwent an immediate RRCM significantly more often than women who had a diagnostic test (21/61, 34%, vs. 13/170, 7.6 %, p < 0.001). Knowledge of carrying a BRCA1/2 mutation when diagnosed with BC influenced decisions concerning primary surgery. Additionally, in more recent years, women who had not undergone predictive testing were more likely to undergo diagnostic DNA testing and RRCM sooner after diagnosis. This suggests the need for RGCT to guide treatment decisions.

Characterization of stable and transient cavitation bubbles in a milliflow reactor using a multibubble sonoluminescence quenching technique.

The bubble type, generated by an ultrasonic field, was studied in a batch and flow reactor using a multibubble sonoluminescence (MBSL) quenching technique with propanol and acetone. The influence of frequency and transducer configuration was evaluated using the same piezoelectric element in both setups. Results show that the bubble type not only depends on the frequency, but also on the input power or transducer configuration. Additionally, the effect of flow on sonoluminescence yield and bubble type was studied in the continuous setup at various frequencies. As the flow becomes turbulent, the sonoluminescence signal reaches a plateau for three out of four frequencies, and a transition from transient to stable cavitation occurs for frequencies below 200 kHz.

Impact of rapid genetic counselling and testing on the decision to undergo immediate or delayed prophylactic mastectomy in newly diagnosed breast cancer patients: findings from a randomised controlled trial.

BACKGROUND: Female breast cancer patients with a BRCA1/2 mutation have an increased risk of contralateral breast cancer. We investigated the effect of rapid genetic counselling and testing (RGCT) on choice of surgery. METHODS: Newly diagnosed breast cancer patients with at least a 10% risk of a BRCA1/2 mutation were randomised to an intervention group (offer of RGCT) or a control group (usual care; ratio 2 : 1). Primary study outcomes were uptake of direct bilateral mastectomy (BLM) and delayed contralateral prophylactic mastectomy (CPM). RESULTS: Between 2008 and 2010, we recruited 265 women. On the basis of intention-to-treat analyses, no significant group differences were observed in percentage of patients opting for a direct BLM (14.6% for the RGCT group vs 9.2% for the control group; odds ratio (OR) 2.31; confidence interval (CI) 0.92-5.81; P=0.08) or for a delayed CPM (4.5% for the RGCT group vs 5.7% for the control group; OR 0.89; CI 0.27-2.90; P=0.84). Per-protocol analysis indicated that patients who received DNA test results before surgery (59 out of 178 women in the RGCT group) opted for direct BLM significantly more often than patients who received usual care (22% vs 9.2%; OR 3.09, CI 1.15-8.31, P=0.03). INTERPRETATION: Although the large majority of patients in the intervention group underwent rapid genetic counselling, only a minority received DNA test results before surgery. This may explain why offering RGCT yielded only marginally significant differences in uptake of BLM. As patients who received DNA test results before surgery were more likely to undergo BLM, we hypothesise that when DNA test results are made routinely available pre-surgery, they will have a more significant role in surgical treatment decisions.

Contrast-enhanced nanofocus computed tomography images the cartilage subtissue architecture in three dimensions.

We describe a non-destructive imaging method, named contrast-enhanced nanofocus X-ray computed tomography (CE-nanoCT), that permits simultaneously imaging and quantifying in 3D the (sub)tissue architecture and (biochemical) composition of cartilage and bone in small animal models at a novel contrast and spatial resolution. To demonstrate the potential of this novel methodology, a newborn mouse was scanned using CE-nanoCT. This allowed simultaneously visualising the bone and cartilage structure much like the traditional alcian blue-alizarin red skeletal stain. Additionally, it enabled a 3D visualisation at such a high spatial image resolution that internal, micro-scale structures could be digitally dissected and evaluated for size, structure and composition. Ex vivo treatment with papain, that is known to specifically remove the non-calcified cartilage layer but keep the calcified cartilage intact, proved CE-nanoCT to be applicable to visualise the subdivisions within the hyaline cartilage of the articular joint of mice. The quantitative power of CE-nanoCT in vivo was evaluated using a mouse model for osteoarthritis (OA), where OA-like cartilage lesions are induced by meniscus destabilisation surgery. The thickness of both the non-calcified and calcified cartilage layer in the knee joint of such mice was visualised and quantified in 3D and compared to unaffected mice. Finally, to show that different forms of cartilage and tissue combinations can be distinguished using CE-nanoCT, different cartilaginous body parts of the mouse were imaged. In conclusion, CE-nanoCT can provide novel insights in preclinical research by quantifying in a non-destructive 3D manner pathological differences, in particular in developing mice, newborns or adults.

Validation of x-ray microfocus computed tomography as an imaging tool for porous structures.

X-ray microfocus computed tomography (micro-CT) is recently put forward to qualitatively and quantitatively characterize the internal structure of porous materials. However, it is known that artifacts such as the partial volume effect are inherently present in micro-CT images, thus resulting in a visualization error with respect to reality. This study proposes a validation protocol that in the future can be used to quantify this error for porous structures in general by matching micro-CT tomograms to microscopic sections. One of the innovations of the protocol is the opportunity to reconstruct an interpolated micro-CT image under the same angle as the physical cutting angle of the microscopic sections. Also, a novel thresholding method is developed based on matching micro-CT and microscopic images. In this study, titanium porous structures are assessed as proof of principle. It is concluded for these structures that micro-CT visualizes 89% of the total amount of voxels (solid and pore) correctly. However, 8% represents an overestimation of the real structure and 3% are real structural features not visualized by micro-CT. When exclusively focusing on the solid fraction in both the micro-CT and microscopic images, only an overestimation of about 5% is found.

Mental and motor development before and during growth hormone treatment in infants and toddlers with Prader-Willi syndrome.

BACKGROUND: Prader-Willi syndrome (PWS) is a neurogenetic disorder characterized by muscular hypotonia, psychomotor delay, feeding difficulties and failure to thrive in infancy. GH treatment improves growth velocity and body composition. Research on the effects of GH on psychomotor development in infants with PWS is limited. OBJECTIVE: To evaluate psychomotor development in PWS infants and toddlers during GH treatment compared to randomized controls. DESIGN/PATIENTS: Forty-three PWS infants were evaluated at baseline. Twenty-nine of them were randomized into a GH group (n = 15) receiving 1 mg/m(2)/day GH or a non-GH-treated control group (n = 14). At baseline and after 12 months of follow-up, analysis with Bayley Scales of Infant Development II (BSID-II) was performed. Data were converted to percentage of expected development for age (%ed), and changes during follow-up were calculated. RESULTS: Infants in the GH group had a median age of 2.3 years [interquartile range (IQR) 1.7-3.0] and in the control group of 1.5 years (IQR 1.2-2.7) (P = 0.17). Both mental and motor development improved significantly during the first year of study in the GH group vs. the control group: median (IQR) change was +9.3% (-5.3 to 13.3) vs.-2.9% (-8.1 to 4.9) (P < 0.05) in mental development and +11.2% (-4.9 to 22.5) vs.-18.5% (-27.9 to 1.8) (P < 0.05) in motor development, respectively. CONCLUSION: One year of GH treatment significantly improved mental and motor development in PWS infants compared to randomized controls.

Micro-rotary fatigue of tooth-biomaterial interfaces.

The bonding effectiveness of restorative materials to tooth tissue is typically measured statically. Clinically tooth/composite bonds are however subjected to cyclic sub-critical loads. Therefore, in vitro fatigue testing of dental adhesives should predict better the in vivo performance of adhesives. The objective of this study was to determine the fatigue resistance of two representative adhesives, a self-etch and an etch&rinse adhesive, bonded to enamel and dentin. Therefore, tooth/composite interfaces were cyclically loaded using a miniaturized version of a rotating beam fatigue testing device. Subsequently, the load at which 50% of the specimens fail after 10(5) cycles, was determined as the median micro-rotary fatigue resistance (microRFR). For both adhesives, the microRFR was about 30-40% lower than the corresponding micro-tensile bond strength (microTBS) to both enamel and dentin. Analysis of the fracture surfaces by Feg-SEM revealed typical fatigue fracture patterns. It is concluded that resin/tooth interfaces are vulnerable to progressive damage by sub-critical loads, with the 3-step etch&rinse adhesive being more resistant to fatigue than the 2-step self-etch adhesive.

Effect of backyard burning on dioxin deposition and air concentrations.

The influence from open burning of garden and household waste on locally measured dioxin deposition and air concentrations was evaluated in three sets of experiments: the combustion of garden waste in barrels and in open fires, and the incineration of household waste in an empty oil drum. Each set was composed of eight individual experiments over 4 h. Deposition gauges were located 20 m NE, SE, SW and NW with respect to the source and on a background location at 400 m SW. Air samples were taken in the plume with a medium volume sampler equipped with a quartz filter and a polyurethane plug. The results illustrate deposition increments in the wind direction at a distance of 20 m from the source of 0.8 pg TEQ/m2 day for garden waste and 2.5 pg TEQ/m2 day for household waste. Concentrations in the plume were increased by 160-580 fg TEQ/m3 over a period of 12 and 31 h respectively. Expressed at a reference CO2 concentration of 9% this corresponds with a range from 0.8 to 3.6 ng TEQ/m3, which is comparable with a poorly controlled MSWI. Emission factors in the order of magnitude of 4.5 ng TEQ/kg combusted garden waste and 35 ng TEQ/kg burned municipal waste were determined.

Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone.

Load-bearing tissues, like bone, can be replaced by engineered tissues or tissue constructs. For the success of this treatment, a profound understanding is needed of the mechanical properties of both the native bone tissue and the construct. Also, the interaction between mechanical loading and bone regeneration and adaptation should be well understood. This paper demonstrates that microfocus computer tomography (microCT) based finite element modelling (FEM) can have an important contribution to the field of functional bone engineering as a biomechanical analysis tool to quantify the stress and strain state in native bone tissue and in tissue constructs. Its value is illustrated by two cases: (1) in vivo microCT-based FEM for the analysis of peri-implant bone adaptation and (2) design of biomechanically optimised bone scaffolds. The first case involves a combined animal experimental and numerical study, in which the peri-implant bone adaptive response is monitored by means of in vivo microCT scanning. In the second case microCT-based finite element models were created of native trabecular bone and bone scaffolds and a mechanical analysis of both structures was performed. Procedures to optimise the mechanical properties of bone scaffolds, in relation to those of native trabecular bone are discussed.

MRI and x-ray CT study of spatial distribution of core breakdown in 'Conference' pears.

Two non-destructive tomographic techniques, X-ray CT imaging and magnetic resonance imaging (MRI), were applied to study the development of core breakdown disorder in 'Conference' pears (Pyrus communis cv. Conference). This disorder, which is characterized by brown discoloration of the tissue and development of cavities, is induced by elevated CO(2) and decreased O(2) levels during controlled atmosphere storage. Tomographic images of pears stored for 10 months under disorder inducing conditions, were acquired with both techniques and compared to the actual slices. Both X-ray and MRI were able to differentiate between unaffected tissue, brown tissue and cavities. A simple image-processing program, based on threshold values, was developed to determine the area percentage of affected and unaffected tissue as well as the cavity and core area per slice. For all three imaging techniques the area percentage brown tissue per slice increased with the diameter of the pear, but was systematically underestimated by 12% and 6% for, respectively, X-ray and MRI, compared to the actual slices. The area percentage cavity corresponded very well for all techniques. It was also found that the contours of the brown tissue were parallel to the fruit boundaries, suggesting a relation between the disorder symptoms and gas diffusion properties of the fruit. It was concluded that MRI is the most appropriate technique to study the development of core breakdown disorder during postharvest storage in future experiments.

Progressive versus constant tapered shaft design using NiTi rotary instruments.

AIM: To evaluate the influence of a progressive versus constant tapered shaft design on canal preparation by NiTi rotary techniques. METHODOLOGY: A XMCT-scanner and custom-made software were used to nondestructively analyse the mesial canals of 10 extracted mandibular molars in 3D with a spatial resolution of 12.5 microm. Specimens (n = 10 per group) were scanned before and after preparation using ProTaper (progressive tapered) or K3 (constant tapered) files. Numerical values for volume, curvature, dentine removal and centring ratio were obtained in addition to a visual inspection for canal aberrations. Data were analysed by (multiway factorial) anova, Wilcoxon tests and t-tests. RESULTS: The volume of total dentine removal (mean +/- SD) was 1.21 +/- 0.66 mm(3) (ProTaper) and 1.06 +/- 0.23 mm(3) (K3) (P > 0.05), and the amount of dentine removal at all separate horizontal regions examined was comparable for both groups. The mean linear dentine removal (transportation) was in the range of 8-212 microm (ProTaper) and 4-187 microm (K3). The resultant centring ratio varied from 0.01 to 0.24 (ProTaper) and from 0.01 to 0.17 (K3), whilst different straightening patterns were observed. A centre displacement towards the furcation coronally was most pronounced for the ProTaper group whereas a centre displacement towards the outer side of the curvature more apically was only observed for the K3 group. No severe canal aberrations were found. CONCLUSIONS: The progressive tapered shaft design of the ProTaper instrument was less influenced by the mid-root curvature than the constant tapered design of the K3 instrument thereby providing a good centred apical preparation. However, ProTaper instruments tended to transport towards the furcation in the coronal region.

Smooth flexible versus active tapered shaft design using NiTi rotary instruments.

AIM: The aim of this study was to evaluate the influence of a smooth flexible versus active tapered shaft design on canal preparation by NiTi rotary techniques. METHODOLOGY: A XMCT-scanner (SkyScan 1072) and developed software (Bergmans et al. 2001) were used to nondestructively analyze the mesial canals of 10 extracted mandibular molars in 3D with a spatial resolution of 30 microm. Specimens (n = 10 per group) were scanned before (PRE) and after (POST) preparation using Lightspeed (smooth flexible) or GT-rotary (active tapered) files. Numerical values for volumes, dentine removal (net) transportation and centring ability were obtained in addition to a visual inspection on canal aberrations. Data were analyzed by Shapiro Wilk test, multiway factorial anova, Tukey-Kramer test, Wilcoxon test and t-test. RESULTS: Results indicated that the active tapered shaft removed significantly more dentine in the middle to apical portion of the root compared to the smooth flexible design. Both groups demonstrated some straightening, but no significant differences were found with respect to instrument types. However, absolute values for net transportation and centering ratio were small and no canal aberrations could be found. CONCLUSIONS: The smooth flexible shaft design did not improve the morphological characteristics of canal preparation by NiTi rotary instruments when compared with the active tapered design. Therefore, system selection should be based upon other criteria.

Cervical external root resorption in vital teeth.

External resorptions associated with inflammation in marginal tissues present a difficult clinical situation. Many times, lesions are misdiagnosed and confused with caries and internal resorptions. As a result inappropriate treatment is often initiated. This paper provides three-dimensional representations of cervical external resorption, based on X-ray microfocus-tomographical scanning of a case, which will aid the dental practitioner in recognizing characteristic features during clinical inspection. In addition, histopathological examination reveals the cellular morphology of the adjacent tissues.

A methodology for quantitative evaluation of root canal instrumentation using microcomputed tomography.

AIM: The aim of this paper was to present an objective methodology for quantitative evaluation of root canal instrumentation using microcomputer tomography, together with developed software based on a constructed mathematical model. METHODOLOGY: A desktop X-ray micro-CT scanner (SkyScan 1072) was used to provide data sets of an extracted mandibular molar before and after instrumentation (ProFile 0.04 Taper instruments, Dentsply Maillefer, Ballaigues, Switzerland) that were stored for later use by software. A volume visualization package (T3D) was applied to obtain 3D renderings of the molar to illustrate the qualitative visualization capacity. Next, medical image volume fusion software was used to allow alignment of pre and post image volumes. Finally, software was developed to make quantitative measurements and to provide additional qualitative information on the registered image volumes. This procedure implemented a true 3D mathematical model for quantification of instrumentation effects. Using a local co-ordinate frame, perpendicular reslices were made at five different levels within the mesio-buccal canal to evaluate transportation and centring ability. RESULTS: At first accurate and detailed 3D renderings were obtained. The general and local canal shape before and after preparation could visually be examined in 360 degrees rotation. Numerical values were obtained for volume, volume changes and transportation. Centring ability was calculated by centring ratio and centre movement. CONCLUSIONS: This methodology is a new and objective way for quantitative evaluation of root canal instrumentation using microcomputer tomography and dedicated software.

Health risk assessment of dioxin emissions from municipal waste incinerators: the Neerlandquarter (Wilrijk, Belgium).

Two municipal waste incinerators in the vicinity of a residential area close to the city of Antwerp caused concern to local habitants. Risk assessment was performed combining chemical, toxicological measurements and model calculations. As the first step in risk assessment an inventory was made of historic emissions from both incinerators with emphasis on dioxins. The operational atmospheric transport and deposition model for priority substances (OPS) was used to calculate the deposition of dioxins in the vicinity of incinerators. The observed soil contamination pattern did not correspond to the calculated deposition pattern, indicating that other sources may contribute at least partly to the local PCDD/PCDF contamination of the area. Dioxin exposure of people in the Neerlandquarter as a function of the food consumption behavior was calculated using a mathematical model (VLIER-HUMAAN) combined with transfer factors. According to the results of these calculations, just residing in the impact area does not result in a meaningful risk. Only if locally produced food was consumed (milk, meat and vegetables), exposure in the Neerlandquarter was enhanced compared to the average dioxin exposure estimated for the Flemish population. Exposure in 1997 was below the exposure in 1980. As a consequence of different eating habits and lower bodyweight, children are subjected to significantly higher exposure than adults. Adverse health outcomes from dioxin exposure in the past cannot be excluded. There was no evidence for enhanced exposure to genotoxicants based on a comparison of chromosomal damage to blood cells of children from the study area to those from a control group.