Analysis of alendronate in human urine and plasma by magnetic solid-phase extraction and capillary electrophoresis with fluorescence detection.

A simple, rapid and sensitive CE-fluorescence (FL) detection method for the analysis of alendronate (ALEN), a bisphosphonate drug, has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 10.0) and a voltage of 24 kV, separation of ALEN in a 55-cm length (35-cm effective length) capillary was achieved in 5 min. FL detection of ALEN was performed via pre-column derivatization with 2,3-naphthalene dicarbox-yaldehyde (NDA). Linear correlation (r=0.9981, n=6) between FL intensity and analyte concentration was obtained in the range of 7-200 ng/mL ALEN. The developed CE-FL method was applied to the analysis of ALEN in human urine and plasma samples. In order to eliminate the interfering matrix components, SPE using magnetic Fe(3) O(4) @Al(2) O(3) nanoparticles as solid sorbents was employed to clean the biological fluids before CE-FL analysis. The linear ranges of ALEN in urine and plasma were 5-100 ng/mL (r = 0.9982, n = 7) and 5-70 ng/mL (r = 0.9954, n = 7), respectively. The LOD and LOQ in both urine and plasma samples were 1.5 and 5 ng/mL ALEN, respectively. Total analysis time including sample pre-treatment and CE separation was less than 1.5 h.

Capillary electrophoresis-electrochemiluminescence detection method for the analysis of ibandronate in drug formulations and human urine.

A simple, rapid and sensitive CE method coupled with electrochemiluminescence (ECL) detection for direct analysis of ibandronate (IBAN) has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 9.0) and a voltage of 13.5 kV, separation of IBAN in a 30-cm length capillary was achieved in 3 min. ECL detection was performed with an indium tin oxide working electrode bias at 1.6 V (versus a Pt wire reference) in a 200-mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)(3)(2+) (where bpy=2,2'-bipyridyl). Derivatization of IBAN prior to CE-ECL analysis was not needed. Linear correlation (r=0.9992, n=7) between ECL intensity and analyte concentration was obtained in the range of 0.25-50 µM IBAN. The LOD of IBAN in water was 0.08 µM. The developed method was applied to the analysis of IBAN in a drug formulation and human urine sample. SPE using magnetic Fe(3)O(4)@Al(2)O(3) nanoparticles as the extraction phase was employed to pretreat the urine sample before CE-ECL analysis. The linear range was 0.2-12.0 µM IBAN in human urine (r=0.9974, n=6). The LOD of IBAN in urine was 0.06 µM. Total analysis time including sample preparation was <1 h.

Microscale solid phase extraction of glyphosate and aminomethylphosphonic acid in water and guava fruit extract using alumina-coated iron oxide nanoparticles followed by capillary electrophoresis and electrochemiluminescence detection.

A microscale solid-phase extraction (SPE) method using alumina-coated iron oxide nanoparticles (Fe(3)O(4)@Al(2)O(3) NPs) as the affinity adsorbent for glyphosate (GLY) and its major metabolite aminomethylphosphonic acid (AMPA) in aqueous solution is reported. One milligram of Fe(3)O(4)@Al(2)O(3) NPs was employed to extract both analytes in 5 ml of aqueous solution. After 5 min extraction, magnetic NPs were isolated from sample solution by employing an external magnet. Followed by rinsing the NPs with 5 microl of 20 mM Na(4)P(2)O(7) solution for 5 min, the extract was directly analyzed using the derivatization-free CE-electrochemiluminescence (CE-ECL) method. With a sample-to-extract volume ratio of 1000, the enrichment factors for GLY and AMPA were 460 and 64, respectively. The limits of detection (LODs) were 0.3 and 30 ng ml(-1) for GLY and AMPA in water, respectively. The developed method was applied to the analysis of GLY in guava fruit. The LOD of GLY in guava was 0.01 microg g(-1). Total analysis time including sample pretreatment, SPE and CE-ECL was less than 1h.

Capillary electrophoretic separation of tricyclic antidepressants using a polymer-coated capillary and beta-cyclodextrin as an electrolyte additive.

A new method for the CE separation of nine tricyclic antidepressants (TCAs), viz. amitriptyline, clomipramine, desipramine, doxepin, fluphenazine, imipramine, nortriptyline, promazine, and thioridazine, is described. The capillary was statically coated with a layer of poly(N,N-dimethylacrylamide) (PDMA) to suppress the EOF, and beta-CD was used as an additive in the BGE solution. The optimal resolution of nine TCAs was obtained by using a 1% v/v PDMA-coated capillary and a BGE solution of 50 mM sodium phosphate buffer (pH 3.0) containing 0.5 mM beta-CD. Efficiencies were typically >10(5 )plates/m. Complete separation of nine TCAs could be achieved in about 28 min; the two diastereomers of doxepin and the two enantiomers of thioridazine could also be separated. The RSD values of migration time and peak area of the TCAs were in the ranges 0.5-0.8 and 3.3-4.9% (n = 10), respectively. In combination with a suitable sample clean-up technique, such as hollow fiber-based liquid phase microextraction (HF-LPME), the polymer-coated capillary can be employed for the CE-UV analysis of TCAs in human plasma.

Analysis of glyphosate and aminomethylphosphonic acid by capillary electrophoresis with electrochemiluminescence detection.

A capillary electrophoresis (CE) method coupled with electrochemiluminescence (ECL) detection for the analysis of glyphosate (GLY) and its major metabolite aminomethylphosphonic acid (AMPA) is presented. Complete separation of GLY and AMPA was achieved in 8 min using a background electrolyte of 20 mM sodium phosphate (pH 9.0) and a separation voltage of 21 kV. ECL detection was performed with an indium tin oxide (ITO) working electrode bias at 1.6 V (vs. a Pt-wire reference) in a 30 0mM sodium phosphate buffer (pH 8.0) containing 3.5mM Ru(bpy)3 2+ (where bpy=2.2'-bipyridyl). Linear correlation (r>or=0.997) between ECL intensity and analyte concentration was obtained in the ranges 0.169-16.9 and 5.55-111 microg ml(-1) for GLY and AMPA, respectively. The limits of detection (LODs) for GLY and AMPA in water were 0.06 microg ml(-1) and 4.04 microg ml(-1), respectively. The developed method was applied to the analysis of GLY in soybeans. The LOD of GLY in soybean was 0.6 microg g(-1). Total analysis time including sample pretreatment was less than 1h.

Microwave-assisted derivatization and single-drop microextraction for gas chromatographic determination of chromium(III) in water.

A rapid and efficient sample preparation method combining microwave-assisted derivatization (MAD) and single-drop microextraction (SDME) for the gas chromatographic (GC) determination of trace Cr(III) in water was developed. Aqueous Cr(III) was first converted to the volatile chromium trifluoroacetylacetonate (Cr(tfa)3) by reaction with 1,1,1-trifluoroacetylacetone (Htfa) under the irradiation of microwave. Derivatization of Cr(III) at ng ml(-1) level could be completed in less than 1 min. The formed Cr(tfa)3 was then extracted into a small droplet (2 microl) of toluene suspended at the tip of a microsyringe needle. The optimal extraction time was 30 min. The solvent drop was directly injected into a GC equipped with a flame photometric detector (FPD) for analysis. The two Cr(tfa)3 isomers extracted could be efficiently separated in 2 min. Linearity (r>0.99) over the concentration range 2-300 ng ml(-1) Cr was obtained and the limit of detection was 0.5 ng ml(-1) Cr. The relative standard deviation was 7.8% at 20 ng ml(-1) Cr (n=5). Applicability of this method to water analysis was examined by analyzing the chromium content in a reference standard water sample and an industrial effluent.

Determination of butyltin and octyltin stabilizers in poly(vinyl chloride) products by headspace solid-phase microextraction and gas chromatography with flame-photometric detection.

Headspace solid-phase microextraction (HS-SPME) and gas chromatography with flame photometric detection (GC-FPD) have been investigated for determination of butyltin and octyltin stabilizers in poly(vinyl chloride) (PVC) products. The organotin stabilizers were first released from the plastic matrix by dissolving the PVC sample in tetrahydrofuran (THF). The stabilizers were then hydrolyzed to the chloride forms, by treatment with 6 mol L(-1) HCl, then derivatized with sodium tetraethylborate (NaBEt4) in 0.2 mol L(-1) sodium acetate buffer (pH 4.5) at 50 degrees C. HS-SPME was performed with a fused-silica fiber coated with a 100-microm film of polydimethylsiloxane (PDMS). The collected organotin compounds were then desorbed in the GC injector at 280 degrees C and analyzed by GC-FPD. Linearity (r > or =0.994) over a concentration of approximately two orders of magnitude was usually obtained. Limits of quantitation (LOQ) of the four organotin compounds studied, viz., monobutyltin (MBT), dibutyltin (DBT), monooctyltin (MOT), and dioctyltin (DOT), were in the range 0.3-1.0 ng Sn mL(-1). Recovery was >90% for butyltins and >80% for octyltins. The method was validated by analyzing two reference standard PVC sheets with known organotin content. The applicability of the method to analysis of organotin stabilizers in commercial PVC products was also demonstrated.

Analysis of ethambutol and methoxyphenamine by capillary electrophoresis with electrochemiluminescence detection.

A capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection method for the analysis of ethambutol (EB) and methoxyphenamine (MP) has been investigated. Complete separation of EB and MP was achieved in 8 min using a background electrolyte of 20 mM sodium phosphate at pH 10.0 and a separation voltage of 9 kV. ECL detection was performed with an indium/tin oxide (ITO) working electrode biased at 1.4 V (versus a Pt wire reference) in a 200 mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)3(2+) (where bpy = 2,2'-bipyridyl). Linear correlation (r > or = 0.993) between ECL intensity and drug concentration was obtained in the range 2-50 ng/ml. The limits of detection (LODs) for EB and MP in water were 1.0 and 0.9 ng/ml, respectively. The relative standard deviation values on peak size (10 ng/ml level) and migration time for the two drugs were in the ranges 5-8 and 0.2-0.7% (n = 7), respectively. Applicability of the CE-ECL method to the analysis of human plasma spiked with EB and MP was examined. The LODs for EB and MP in plasma were 0.4 and 0.3 microg/ml, respectively.

Determination of chromium(III) in water by solid-phase microextraction with a polyimide-coated fiber and gas chromatography-flame photometric detection.

A method for the determination of trace Cr(III) in aqueous solution by solid-phase microextraction (SPME) coupled with gas chromatography (GC)-flame photometric detection (FPD) was developed. Aqueous Cr(III) was first converted to the volatile chromium trifluoroacetylacetonate (Cr(tfa)3) by derivatization with 1,1,1-trifluoroacetylacetone (Htfa), followed by SPME extraction using a polyimide-coated silica fiber. The distribution constants (K) of derivatized cis- and trans-Cr(tfa)3 between the polyimide phase and aqueous phase were 2012 and 2214, respectively. The two Cr(tfa)3 isomers extracted can be efficiently separated by a DB-210 GC column within 9 min. Selective detection of Cr was performed by a FPD equipped with a 385-nm long-pass filter. Linearity (r> 0.99) over the concentration range 5-300 ng ml(-1) Cr was obtained and the limit of detection was 2 ng ml(-1) Cr. The relative standard deviation was 7% at 10 ng ml(-1) Cr (n = 5). Applicability of this method to water analysis was tested by analyzing the chromium content in a reference standard water sample and an industrial effluent.

A simple and low-cost electrochemiluminescence detector for capillary electrophoresis.

A simple and cost-effective electrochemiluminescence (ECL) detector for capillary electrophoresis (CE) has been developed. The detector was constructed by vertically gluing a 0.5 mL plastic sample vial onto a piece of 1.5 cm x 1 cm x 0.6 mm indium/tin oxide (ITO)-coated glass plate. End-column ECL detection was performed in a wall-jet configuration. Potential control of the ITO electrode was provided using a direct current (DC) battery. Tris(2,2'-bipyridyl)ruthenium(III) (Ru(bpy)3(3+))-based ECL reaction was used for sensitive detection of four trialkylamines (trimethylamine, triethylamine, tripropylamine, tributylamine) and two amino acids (proline, hydroxyproline). With 15 mM sodium borate (pH 9.5) plus 3.5 mM Ru(bpy)3(2+) present in the detection cell and the ITO electrode biased at 1.7 V (vs. platinum wire reference), the test analytes can be efficiently separated and sensitively detected by the developed CE-ECL system. Linearity (r > or = 0.995) over two orders of magnitude and an average number of theoretical plates of 160 000/m were generally obtained. Reproducibility on peak height and migration times (n = 42) was 3.3% and 1.2% for tripropylamine, and 2.4% and 1.5% for proline, respectively. The detection limits were in the range of 2-5 microM (1-2 fmol) for the test analytes.

Capillary electrophoresis of baclofen with argon-ion laser-induced fluorescence detection.

A capillary electrophoretic method with laser-induced fluorescence detection for baclofen (4-amino-3-p-chlorophenylbutyric acid) has been developed. 6-Carboxyfluorescein succinimidyl ester was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and an air-cooled argon-ion laser (excitation at 488 nm, emission at 520 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the lowest derivatizable concentration limit for baclofen in aqueous solution was 10 nM (2 ng baclofen/ml). Coupled with a simple clean up procedure, the method can be applied to the analysis of baclofen in human plasma at micromolar level. Recovery of spiked baclofen in plasma was 95%. The relative standard deviation values on peak size (0.5 microM level) and migration time were 8.2 and 1.0% (n=7), respectively. The limit of detection of baclofen in plasma was 0.1 microM (21 ng/ml).