Experimental demonstration of a classical analog to quantum noise cancellation for use in gravitational wave detection.

We present results that are a classical analog to quantum noise cancellation. It is possible to breach the standard quantum limit in an interferometer by the use of squeezing to correlate orthogonal quadratures of quantum noise, causing their effects on the resulting sensitivity to cancel. A laser beam incident on a Fabry-Perot cavity was imprinted with classical, correlated noise in the same quadratures that cause shot noise and radiation pressure noise. Couplings between these quadratures due to a movable mirror, sensitive to radiation pressure, cause the excess classical noise to cancel. This cancellation was shown to improve the signal to noise ratio of an injected signal by approximately a factor of 10.

Analysis of light noise sources in a recycled Michelson interferometer with Fabry-Perot arms.

We present a method by which the effect of laser field variations on the signal output of an interferometric gravitational wave detector is rigorously determined. Using the Laser Interferometer Gravitational Wave Observatory (LIGO) optical configuration of a power recycled Michelson interferometer with Fabry-Perot arm cavities as an example, we calculate the excess noise after the input filter cavity (mode cleaner) and the dependence of the detector strain sensitivity on laser frequency and amplitude noise, radio frequency oscillator noise, and scattered-light phase noise. We find that noise on the radio frequency sidebands generally limits the detector's sensitivity.

Arm cavity resonant sideband control for laser interferometric gravitational wave detectors.

We present a new optical control scheme for a laser interferometric gravitational wave detector that has a high degree of tolerance to interferometer spatial distortions and noise on the input light. The scheme involves resonating the rf sidebands in an interferometer arm cavity.

Demonstration of a power-recycled Michelson interferometer with Fabry-Perot arms by frontal modulation.

Large-scale gravitational-wave detectors currently under construction such as the LIGO detectors use multiplemirror resonant optical systems containing several surfaces at which the relative phase of interfering light beams must be controlled. We describe a tabletop experiment that demonstrates a scheme for extracting signals in such an interferometer corresponding to deviations from perfect interference.

LIGO: The Laser Interferometer Gravitational-Wave Observatory.

The goal of the Laser Interferometer Gravitational-Wave Observatory (LIGO) Project is to detect and study astrophysical gravitational waves and use data from them for research in physics and astronomy. LIGO will support studies concerning the nature and nonlinear dynamics of gravity, the structures of black holes, and the equation of state of nuclear matter. It will also measure the masses, birth rates, collisions, and distributions of black holes and neutron stars in the universe and probe the cores of supernovae and the very early universe. The technology for LIGO has been developed during the past 20 years. Construction will begin in 1992, and under the present schedule, LIGO's gravitational-wave searches will begin in 1998.

Brightness Temperatures of Saturn's Disk and Rings at 400 and 700 Micrometers.

Saturn was observed in two broad submillimeter photometric bands with the rings nearly edge-on. The observed brightness temperatures fall below the predictions of atmospheric models constructed from data at shorter wavelenths, indicating the presence of an opacity source besides pressure-broadened hydrogen lines in the submillimeter region. In combination with earlier measurements at larger inclination angles, these results yield a 400-micrometer brightness temperature for the rings of approximately 75 K.

Compact infrared heat trap field optics.

A design is presented for achieving compact ir heat trap field optics by incorporation of a lens into the light collector.