Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry.

Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment.

Electric-field-induced second harmonic generation in silicon dioxide.

Electric-field-induced second harmonic generation (EFISH) as a third order nonlinear process is of high practical interest for the realization of functional nonlinear structures. EFISH in materials with vanishing χ(2) and non-zero χ(3) offers huge potential, e.g., for background-free nonlinear electro-optical sampling. In this work, we have investigated SiO2 as a potential EFISH material for such applications using DC-electric fields. We were able to observe significant second harmonic generation (SHG) in comparison to the background SHG signal. The fundamental excitation at 800 nm results in a SHG signal at 400 nm for high applied DC electric fields, which is a clear indication for EFISH. Additionally, we were are able to precisely model the EFISH signal using time-domain simulations. This numerical approach will be of great importance for efficiency enhancement and prove as a valuable tool for future device design.

Impact of carbon-ion implantation on the nonlinear optical susceptibility of LiNbO3.

In this work we study the impact of ion implantation on the nonlinear optical properties in MgO:LiNbO3 via confocal second-harmonic microscopy. In detail, we spatially characterize the nonlinear susceptibility in carbon-ion implanted lithium niobate planar waveguides for different implantation energies and fluences, as well as the effect of annealing. In a further step, a computational simulation is used to calculate the implantation range of carbon-ions and the corresponding defect density distribution. A comparison between the simulation and the experimental data indicates that the depth profile of the second-order effective nonlinear coefficient is directly connected to the defect density that is induced by the ion irradiation. Furthermore it can be demonstrated that the annealing treatment partially recovers the second-order optical susceptibility.

Vibrational properties of the LiNbO3 z-surfaces.

The existence of localized vibrational modes both at the positive and at the negative LiNbO3 (0001) surface is demonstrated by means of first-principles calculations and Raman spectroscopy measurements. First, the phonon modes of the crystal bulk and of the (0001) surface are calculated within the density functional theory. In a second step, the Raman spectra of LiNbO(3) bulk and of the two surfaces are measured. The phonon modes localized at the two surfaces are found to be substantially different, and are also found to differ from the bulk modes. The calculated and measured frequencies are in agreement within the error of the method. Raman spectroscopy is shown to be sensitive to differences between bulk and surface and between positive and negative surface. It represents therefore an alternative method to determine the surface polarity, which does not exploit the pyroelectric or piezoelectric properties of the material.